SPL REPAIR/REPLACEMENT OF STEAM BOILER, HYDRO EXTRACTOR, FLAT BED AT CH(NC) UNDER GE (UTILITY) UDHAMPUR

Amount

Dismantling, opening and disconnecting all water ,electrical and steam connection to existing old unserviceable Boilers with electrical control panel including taking out complete old unserviceable Boiler with steam separator and steam header including removing of foundation nut bolt and shifting/transporting of this old unsv Boiler from existing site to MES Store yard complete all as specified and directed by Engr in charge.

Supply , installation , testing & commissioning of NON-IBR coil type steam boiler having steam generating cap- 600 kgs/hr, steam output -10.54 kg/cm2 , HSD fired steam boiler with pressure part assembly consisting of closely wound helical vertical membrane coil fabricated out of high temperature resistant ERW tubes and flates, double jacketed air casting with an aluminium radiator to enclose the pressure parts and serve as an intergal combustion Air Preheater with steam separator and height including foundation work for boilers as per OEM specification & design with suitable size of nut and bolt with control panel including water connection, electrical connection and steam connection with steam header comprising the followings:- (i) Pressure atomised forced draft down firing burner assembly for HSD firing-01, (ii) Forced draft down firing burner assembly for NG firing-01, (iii) Fuel pump coupled to motor, Blower coupled with motor mounted on bottom chassis duly connected to the jacket-01, (vi) Water pump with surge suppressor and relief valve mounted on pumping module-01, (v) Atmospheric economizer and heat optmizer to pre-heat feed water-01,

Srl item No 2 contd... (vi) Dust protected pre-wired control panel with necessary switch gear, power and control circuitry-01 Set of tool kits-01, (vii) Steam seperator assembly-01, Model No : RXA 06 (REVOMAX) of make THERMAX or equvivalant of MAXIMA / HOTMAX. Note: (a) The supply,installation, testing and commisioning of the boiler shall be carried out by OEM and purchase voucher with test certificate and warranty certificate shall be deposited by the contractor to the MES department. (b) Contractor should responsible to carried out testing of boiler as per boiler inspection act and in presence of officer detailing accepting officer. The T&P and fuel required should be arrange by contractor for that rates included in quoted rate. (c) Loading/unloading and transportation charges for shifting of boiler shall be deem inclusive in quoted rates.

Dismantling, opening and disconnecting all water and electrical connection to existing old unserviceable Hydro extractor including removing & shifting/transporting of this old unsv Hydro extractor from existing site to MES Store yard complete all as specified and directed by Engr in charge.

Supply, installation, testing and commissioning of Hydro extractor 50 KG cap (approx. size = 1300mm x 1600mm x 1190 mm), top loading type, self balancing direct drive with specially designed motor and DC injector break, stainless steel inner basket and outer drum, automatic feture like auto timed, auto stop complete all as approved by GE. Make - Supershine / Stefab / Electrolux.

Dismantling of existing old unserviceable flat bed press including disconnection with existing air compressor/ steam pipe lines and removing & shifting/transporting of this old unserviceable flat bed press from existing site to MES Store yard complete all as specified and directed by Engr in charge.

Supply, installation, testing and commissioning of flat bed press steam operated, automatic with auto time realease, auto tempture control, powerful moisture suction, pneumatic raising and lowering, spring suspended head with adjustable pressure, uniform tempture and pressureshould available on the bed, ato time realese, auto check for over drying, head & buck size 1500mm x 750mm (approx) suitable for ironing of lenen/ bed sheets etc including connection with existing air compressor/ steam pipe lines complete all as approved. Make - Supershine / Stefab / Electrolux.

40 mm bore steel water tubing medium grade galvanised with and including all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) for steam boiler complete all as specified and as directed by Engr-in-Charge.

MS water tubing 20 mm bore heavy grade with and including all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) for steam boiler complete all as specified and as directed by Engr-in-Charge.

MS water tubing 25 mm bore heavy grade with and including all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) for steam boiler complete all as specified and as directed by Engr-in-Charge.

Insulation of M S Pipe with PUF slab 30 mm thick with and including applying bituminuous compound and GI cladding with 26 gauge GI sheet suitable for 20mm hot water tubing complete all as specified and as directed by Engr-in-Charge.

Insulation of M S Pipe with PUF slab 30 mm thick with and including applying bituminuous compound and GI cladding with 26 gauge GI sheet suitable for 25mm hot water tubing complete all as specified and as directed by Engr-in-Charge.

Electromech Engineers