Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹72.4 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹72.4 L+₹1,000 (0.01%)Admitted-Finance | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | SHRI GANESH DEVEOPER & CONSULTANCY PRIVATE LIMITED L1 | shri ganesh construction company L2 |
|---|---|---|---|---|---|
| 1.00Deep drilling, development and stabilization of tube well upto 250 meters below ground level by Direct Rotary Method of Drilling on EPC Mode at Bahu in District Jammu | |||||
| 1.01 | Clearing of site by way of bush cutting, making approach road, shifting of machinery and allied material, preparation of site, proper leveling for installation of machinery. | 1 | Job | 64,000 ₹64,000 Lowest | 65,000 ₹65,000 |
| 1.02 | Drilling of gravel packed bore hole of 530mm diameter by Direct Rotary or any other suitable method in all types of strata to suite geological requirements and conditions. The work excludes cost of blind pipe and strainer upto the depth of 250 mtr.
i) From 0 to 200 mts BGL | 200 | Mtr | 18,000 ₹36,00,000 Lowest | 18,000 ₹36,00,000 Lowest |
| 1.03 | ii) From 200 to 250 mts BGL | 50 | mtr | 20,000 ₹10,00,000 Lowest | 20,000 ₹10,00,000 Lowest |
| 1.04 | Providing and lowering of liner assembly 250 mm dia. X 8.0mm thickness after welding upto the desired length and design approved by the competent authority. (The quantity in BOQ is tentative and payment shall be made on actual quantity consumed) | 250 | Mtr | 5,900 ₹14,75,000 Lowest | 5,900 ₹14,75,000 Lowest |
| 1.05 | Providing of pea shaped gravel as per IS-4097 of 1967 with latest amendments for gravel packing of tubewell shrouding during lowering of liner assembly and development of tubewell. (To be charged as per actual) | 100 | Cum | 4,400 ₹4,40,000 Lowest | 4,400 ₹4,40,000 Lowest |
| 1.06 | Development of tubewell by air compressor of adequate capacity to give clear water free from sand and other impurities. | 1 | Job | 3,00,000 ₹3,00,000 Lowest | 3,00,000 ₹3,00,000 Lowest |
| 1.07 | Stabilization and yield testing of tubewell by using V. T. Pump / Submersible Pump Set as per IS-Code-Part I 2800 of 1991 & IS-2800 Part II of 1979 reaffirmed 1999 with upto date amendments. | 1 | Job | 1,50,000 ₹1,50,000 Lowest | 1,50,000 ₹1,50,000 Lowest |
| 1.08 | Fabrication providing / fitting of steel supporting structure for clamping of tubewell housing using 2 No. parallel ISMB-250 of 5 mtr length each and M.S. angle 40 x 40 x 6mm and M.S. plate 10mm thick with 2 Nos cement concrete blocks of size 1.00mtr x 1.00mtr x 1.00 mtr 1 No. each of both ends.
Note: The job includes well capping after yield test in presence of the representative of the department. | 1 | Job | 80,000 ₹80,000 Lowest | 80,000 ₹80,000 Lowest |
| 1.09 | Cost of slotting 250mm dia. (to be charged as per actual) | 35 | Mtr | 3,800 ₹1,33,000 Lowest | 3,800 ₹1,33,000 Lowest |
Tender Value
Refer Docs
EMD Value
₹1.4 L
Closing Date
21 Nov 2022, 6:00 pmClosed
Executive Engineer Jal Shakti (M) G.W.D. Division
Executive Engineer Jal Shakti (M) G.W.D. Division
Deep drilling, development and stabilization of tube well upto 250 meters below ground level
2022_PHE_191239_1
e- NIT No GWD/124 of 2022-23
Open Tender
Drilling Works
Item Rate
120 days
Bahu in District Jammu
As per SBD
10 documents required · 10 mandatory
₹2,000
Yes
Executive Engineer Jal Shakti (M) G.W.D. Division
₹1.4 L
Yes
Office of the Executive Engineer Jal Shakti (M) GW
30 Nov 2022
6 Oct 2022
22 Nov 2022
6 Oct 2022
21 Nov 2022
18 Oct 2022
17 Oct 2022
Amount
Deep drilling, development and stabilization of tube well upto 250 meters below ground level by Direct Rotary Method of Drilling on EPC Mode at Bahu in District Jammu
Clearing of site by way of bush cutting, making approach road, shifting of machinery and allied material, preparation of site, proper leveling for installation of machinery.
Drilling of gravel packed bore hole of 530mm diameter by Direct Rotary or any other suitable method in all types of strata to suite geological requirements and conditions. The work excludes cost of blind pipe and strainer upto the depth of 250 mtr. i) From 0 to 200 mts BGL
ii) From 200 to 250 mts BGL
Providing and lowering of liner assembly 250 mm dia. X 8.0mm thickness after welding upto the desired length and design approved by the competent authority. (The quantity in BOQ is tentative and payment shall be made on actual quantity consumed)
Providing of pea shaped gravel as per IS-4097 of 1967 with latest amendments for gravel packing of tubewell shrouding during lowering of liner assembly and development of tubewell. (To be charged as per actual)
Development of tubewell by air compressor of adequate capacity to give clear water free from sand and other impurities.
Stabilization and yield testing of tubewell by using V. T. Pump / Submersible Pump Set as per IS-Code-Part I 2800 of 1991 & IS-2800 Part II of 1979 reaffirmed 1999 with upto date amendments.
Fabrication providing / fitting of steel supporting structure for clamping of tubewell housing using 2 No. parallel ISMB-250 of 5 mtr length each and M.S. angle 40 x 40 x 6mm and M.S. plate 10mm thick with 2 Nos cement concrete blocks of size 1.00mtr x 1.00mtr x 1.00 mtr 1 No. each of both ends. Note: The job includes well capping after yield test in presence of the representative of the department.
Cost of slotting 250mm dia. (to be charged as per actual)
shri ganesh construction company
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .