4711-Plan- Other Drainage Works.

Amount

Fabrication supplying and erection of flange mounted hot dip Galvanized octagonal Poles having 85 micron of 8 Mtr. Height made from 3mm thick from Tata/Sail steel plate having bottom Dia of 155 mm & top Dia of 70mm complete with window with flash cover at the height of 2.00 Mtr from the base of cable termination Block etc. and galvanization base plate of size 250mm x 250mm x16mm thick on existing cement concrete pedestal as required including suppling and fixing of laminated sheet, DIN channel, BUS Bar and earth sheet 2 Nos. welded at suitable height as per direction of Enginer-in-charge. 2 Nos. washer, nuts and locking arrangement completed as required (make Bajaj/Volmont/Phillips/Lysaght/Consoul / Transrail)

Supplying and fixing of 4 Nos. 20mm x 750mm long GI foundation bolt (EN 8 grade) with nuts washer including 2 Nos. template of 3mm thick size 250mmx250mmx16mm thick with 4 Nos. 24mm Dia holes to match with PCD of poles base plate as required (make Bajaj/Volmont/ Transrail/Lysaght/ Consoul/Phillips)

Fabrication supplying and fixing of galvanized Double arm bracket (V shape) made out of 88.9mm Dia 300mm long galvanized top tube with 1500mm long 48.30x3.20mm thick galvanized single over hang with tightening bolts etc as required (ordinary) (make Bajaj/Volmont/ Transrail/Lysaght/ Consoul/Phillips)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo mechanically treated bars of graded Fe-500D or more.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns etc. for mass concrete

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil Pipes, cables etc, not exceeding 80 mm dia.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/Metal pipe as required upto 35 Sq.mm

Supplying and laying double walled corrugated (DWC) High Density Poly ethylene (HDPE) pipe of 50/38 size having corrugation on the outer wall and plain surface on inner wall confirming to IS 14930 (Part II) below the ground level excluding excavation refilling the trench etc. as per specification etc. as required

Supplying installation testing and commissioning of 90-92W (System Wattage) LED street light Luminaries with in high pressure die cast LM6 Aliminium/ extruded Aluminium housing, minimum 9000 Lumen output, CCT > 5700 K, for effective thermal managament, sturdiness and better aesthetics. Luminaries should be 140-270 Volt, surge protection > 5KV (additional SPD 5 KV inside Housing ), Driver efficiency should be > 85%THD < 10% Driving current of LED < 700 mA, phase to phase protection 415 Volt AC, individual lense for each LED for Better Uniformity. UV stablized polycarbonate / glass cover high ingress protection of IP 66 for complete luminaries. sutaible for side entry with GI (B Class ) bracket of 40-60 mm dia Pipe etc. complete as reqired (make Bajaj/Havells/Halonix/Phillips/Wipro/Surya/Orient/Crompton)

Supplying & testing of PVC insulated armored and PVC Sheathed (genral pupose ) multi core cable with standard aluminium conductor suitable for working voltage upto and including 1100 volts confirming to IS1554/pt/88 with amendment NO. as required 4x 16 Sqmm (Finolex/ Havells/Polycab/KEI)

Supplying & drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel / PVC conduit as required 2 x 2.5 Sqmm

Supplying & fixing 5 amps to 32 amps rating, 240/415 volts 'C' curve miniture circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, testing and comissioning etc. as required A) Single pole

Earthing with GI earth pipe 4.5 Mtr long, 40 mm Dia including Accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal /coke and salt as required

Providing and laying 6 SWG G.I. wire on surface or in recess for loop earthing along with existing surface/recessed/conduit/sub main wiring /cable as required

ACE ENGINEERS BUREAU