Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.3 LAccepted-AOC | L1 | Accepted-AOC Being Lowest and Quoted rates are reasonable | |
| 2 | L2₹46.7 L+₹1.3 L (2.76%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹50.8 L+₹5.3 L (11.7%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹52.3 L+₹6.9 L (15.2%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹52.5 L+₹7.1 L (15.5%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
9 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PULGAON
GE PULGAON CAD CAMP 442303
CERTAIN REPAIRS TO THE BLDGS OF MH, DOMESTIC LINES, MES INSTALLATIONS, SHIVAJI LINES AND POLICE LINE IN RA AT CAD PULGAON
2024_MES_642966_1
8075/PUL/E8
Open Tender
Civil Works
Item Rate
180 days
GE PULGAON
As Per Tender Documents
8 documents required · 8 mandatory
₹500
Yes
GE PULGAON
₹90,000
Yes
7 May 2024
17 Feb 2024
16 Mar 2024
17 Feb 2024
9 Mar 2024
4 Mar 2024
19 Feb 2024 - 2 Mar 2024
Amount
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa and AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. all as specified and as directed.
S&F in repairs pre-painted galvalume aluminium zinc coating GI based crumpled corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa and AZ-150 as in ridge fixed with self tapping screws dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in ridges complete all as specified and as directed.
S&F in repairs for 6 mm thick asbestos cement corrugated sheet in roofs, walls, etc fixed with L type or J type or cranked hook bolts complete all as specified and as directed.
Dismantling of timber scantlings 40 sq cm and over in section in any position,framed work complete all as specified and as directed.
Dismantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section unframed works complete all as specified and as directed.
M L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates grade of steel Fe-290(Gde E 165)
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & directed.
M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required complete all as specified and as directed.
M&L for PCC(1:2:4) type B-2 (using 40mm graded stone aggregate) as in surface channel in drains including demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for as in coping, drains complete all as specified and as directed.
Taking down chowkats or frames with shutters n,exc 1.50Sqm (without taking off shutters from the frames) complete all as specified and as directed.
Taking down chowkats or frames with shutters but exc 1.50 Sqm but n exc 4 Sqm (without taking off shutters from the frames) each complete all as specified and as directed.
Taking down shutters not exc 1 Sqm each complete all as specified and as directed.
Taking down shutters exc 1 Sqm and n.exc 2 Sqm each complete all as specified and as directed.
Refixing of shutters in the same opening with shutters not exc 1 Sqm each complete all as specified and as directed.
Refixing of shutters in the same opening with shutters exc 1 Sqm and n.exc 2 Sqm each complete all as specified and as directed.
S&F for second class hard wood plain, solid, straight, chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned complete all as specified and as directed.
S&F Structural Steel work conforming to Fe-290 Gde E-165 as in framed structure for staging of water tank ,doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, incl 1 mm thick mild steel, plain sheet , cut to size,drilled, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, sliding bolts and fixing complete all as specified and as directed.
S&F factory made 35mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F factory made 2nd Class Hardwood 35 mm thick glazed and skeleton shutters open rebated & prepared to receive glass, gauge etc without sash bars edges & mitred beads for securing glass/gauge etc complete all as specified and as directed.
S&F factory made 2nd Class Hardwood 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated sash bar as in window/ventilator, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(b) supplied and fitted to chowkats complete all as specified and as directed.
Cutting holes in stone walls/brick walls built in cement mortar or cement lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B1 complete, depth of embedded portion of hold fasts not exc half brick complete all as specified and as directed.
S&F of 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed.
S&F in repairs of 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane incl hacking out old broken glass, cleaning rebates in preparation for reglazing carefully, taking out beads, removing any serviceable glass to store and rubbish off the premises complete all as specified and directed.
S&F of Stainless steel wire cloth, 0.36mm normal dia of wire and avg. width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
All as above but in repairs
S&F 100 mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed.
S&F 150 mm aluminium anodised, barrel tower bolts of extruded section all as specified and as directed
S&F 150mm extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed
S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.
S&F solid PVC door frame of size 50 x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, in opening complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F 100mm butt hinges, aluminium anodised of extruded section complete all as specified and as directed
S&F 100 mm aluminium anodised, barrel tower bolts of extruded section all as specified and as directed
S&F 100mm extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed
M&L for preparation of new wood or wood based surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide complete all as specified and directed.
S&F for powder coated, aluminium frame work in partition/doors/windows with shutter all a round and including aluminum beading, glazing cleats fixed in frames, Neoprene rubber beading/packing incl 150mm handle, 200mm tower bolt etc. complete all as specified and directed.
S&F decorative aluminium grill,weight not less than 3.13 kg/sqm (with frame of size 20 x 20mm aluminium cleat screwed to main frame) and fixed to wall/window/ventilator with screws complete all as specified and as directed.
S&F 5 mm thick figured glass, pin head type and glazing with oil putty in squre and fixed inside aluminium frame exc 0.5 Sqm in each pane all as specified and directed.
S&F 4 mm thick figured glass, pin head type and glazing with oil putty in squre and fixed inside aluminium frame n.exc 0.5 Sqm in each pane all as specified and directed.
S&F 3-4 mm thick Aluminium Composite Board, both side with decorative lamination fixed inside aluminium frame all as specified and directed.
S&F aluminium mortice lock 4 lever vertical type 75 mm size for aluminium door shutter complete all as specified and directed.
S&F for double action floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed.
S&F in repairs curtain rails with25mm, mild steel, chromium plated with fixing brackets, stops, rollers all as specified and directed.
S&F in repairs stainless steel SS grade 304, curtain rods 25mm dia 1.2mm thick with brackets of SS grade 304 all as specified and directed.
S&F in repairs block boards grade 2 quality 18/19mm thick interior grade with decorative face both side, interior grade, commercial type, fixed with screw to timber frame work for cupboard shutter, shelf etc complete all as specified.
M&L machine cut cudappah stone slab 20-25mm thick polished one side laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl incl rubbing and polishing and demolition of existing stone slabs and tiles of any description or thickness in floors, aprons etc Laid, bedded complete all as specified and as directed.
M&L for granite (of any type) work (table rubbed and polished) of 14-16 mm th as in steps, jambs, pillars, window-cills, cooking platforms and like laid over cement screed of 10mm th in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of existing stone slab and tiles of any description or th in floors , aprons etc
M&L for Brick work with fly ash bricks straight or curved on plan exc 6m in radius but built in 1:6 cement mortar including demoltion of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in concrete bed including demoltion of existing damaged PCC and disposal of rubbish complete all as specified and as directed.
M&L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing the rubbish off the premishes complete all as specified and as directed.
M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing the rubbish off the premishes complete all as specified and as directed.
All as above here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:3 including dismantling of existing skirting with cement mortar bedding (but not backing) and removing the rubbish off the premishes complete all as specified and as directed.
M&L for glazed ceramic tiles coloured of size 350x250x7mm/ 450x350x7mm thick fixed in vertical surfaces, set and jointed in neat cement slurry and pointed in white and colour cement to match incl 10mm thick screed bed in CM 1:4 including dismantling of existing wall tiling with cement mortar bedding (but not backing) and removing the rubbish off the premishes complete all as specified and as directed.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.
M&L 8-9mm thick designer ceiling board in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed pipe or wall plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19x19mm of white colour all as per instruction complete all as specified and as directed.
M&L for 40mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and smooth without using extra cement including demoltion of existing damaged PCC and disposal of rubbish complete all as specified and as directed.
M&L for 75mm PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection even and smooth without using extra cement including demoltion of existing damaged PCC and disposal of rubbish complete all as specified and as directed.
M&L for 100mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in path/paving/hard standing and finishing the surfaces even and smooth without using extra cement including demoltion of existing damaged PCC and disposal of rubbish complete all as specified and as directed.
M&L of machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade including 50 mm sand cushioning with grey cement and pigment including demoltion of existing and disposal of rubbish complete all as specified and as directed.
M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in base for path/paving/hard standing including demoltion of existing damaged PCC and disposal of rubbish complete all as specified and as directed.
Taking down cement plaster of any description on brick/ Stone Walls or from Concrete Surfaces incl raking out joints, hacking for key, scrubbing down with water etc all as specified and removing unserviceable material outside premises complete all as specified and as directed.
M&L for rendering 15 mm thick in CM 1:6 on faces of stone, brickwork or concrete surfaces (internal), finished even and smooth without using extra cement etc complete all as specified and as directed.
M&L for 15mm thick rendering in two coats on stone/ brick/ concrete surfaces (external) finished even and smooth without using extra cement etc. 1st coat 10 mm thick in CM 1:6 and 2nd coat 5mm thick in CM 1:4 mix with water proofing compound as per manufacturer instructions complete all as specified and as directed. Note : WPC shall measured and paid Seprately
Supply only Integral water proofing Compound
M&L preparation of new or old plastered/unplastered surfaces of wall and applying two coats of oil bound distemper over 1mm coat of wall care putty on surfaces of wall complete all as specified and as directed.
M&L for preparation of new or old plastered/unplastered surfaces of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified and as directed.
M&L for preparation of new or old plastered/unplastered surfaces of walls and applying two coats of white wash complete all as specified and directed.
S&F 15mm bore medium grade glavanised tubes with all fittings and fixed complete to walls etc including taking up or down 15mm dia steel tubing and connections from wall / ceiling or laid floors including cleaning for refixing complete all as specified and as directed.
S&F 20mm bore medium grade glavanised tubes with all fittings and fixed complete to walls etc including taking up or down 20mm dia steel tubing and connections from wall / ceiling or laid floors including cleaning for refixing complete all as specified and as directed.
Refixing 15 or 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)
S&F in repairs rotational moulded polyethylene water storage tank tripple layered (cylindrical vertical with closed top) hoisted and fixed in position of 500 litres capacity confiring to IS specification, incl 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repairs rotational moulded polyethylene water storage tank tripple layered (cylindrical vertical with closed top) hoisted and fixed in position of 1000 litres capacity confiring to IS specification, incl 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified and as directed.
Cleaning and removing all scale and dirt, etc, from tanks of capacity n exc 500 litres and from mouths of circulating pipes, etc complete all as specified and as directed. Note : Cleaning date to be written with white/black paint after cleaning. Recovery shall be done if not written.
Cleaning and removing all scale and dirt, etc, from tanks of capacity n exc 1000 litres and from mouths of circulating pipes, etc complete all as specified and as directed. Note : Cleaning date to be written with white/black paint after cleaning.Recovery shall be done if not written.
S&F in repairs for vitreous china wash basin white flat back, size 580x450mm incl brackets, cutting for and pinning in ends of brackets or erecting stand, incl 32mm waste coupling of PTMT (half or full threaded) and waste pipe complete all as specified and as directed.
S&F in repairs stainless steel sinks with drainage board made of 1mm thick for kitchen with plugs washer, waste pipes, cast iron cantilever brackets, connecting union to pipe of overall size 915mm x 460mm, bowl size 410 x 330 x 160 mm with glossy finish, including bedding in cement mortar to dwarf wall fixing cantilever brackets and connecting unions to pipe incl 40mm waste coupling of PTMT (half or full threaded) and waste pipe complete all as specified and as directed.
S&F in repairs Vitreous China squatting pan, ' Orissa pattern, size 580 x 440mm white, with intergal foot rest (excluding flushing cistern and flush pipe) with complete water closet (Squatt pattern) including provision of lime concrete bedding
S&F in repairs vitreous china wash down water closet pan (Pedestall Pattern) white with 'P' or 'S' trap excluding flushing cistern and flush pipe
S&F in repairs PVC valveless, syphonic action type, 10 ltrs capacity flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and as directed.
S&F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed. Note : Scaffoldings to be used for height more than 3m
S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed. Note : Scaffoldings to be used for height more than 3m
S&F in repair PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.
Ditto but of 110mm bore complete all as specified and as directed.
S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
S&F in repairs PVC (SWR) floor trap plain with grating incl jointing with solvent cement of 75mm dia complete all as specified and as directed.
S&F in repairs 15 mm bore dia of fancy type Pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure scewed for iron pipe and fixed to 15mm dia pipe complete all as specified and as directed.
S&F in repairs 15mm bore dia of fancy type stop valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.
S&F in repairs 15mm bore dia of stop valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.
S&F in repairs 15mm bore dia Bib tap fancy type chromium plated with crunch or butterfly handle , screwed for iron pipe or for brass pipe and fixed complete all as specified and as directed.
S&F in repairs 20mm bore gun metal gate valves, with iron wheel head , screwed both ends for iron pipes complete complete all as specified and as directed.
S&F in repairs CP grating 110mm.
Dismantling post or post struts (wood steel or RCC) any section, including taking out embedded portion and making good posts embedded in concrete complete all as specified and as directed.
M&L PCC 1:4:8 type D2 (using 40 mm graded aggregade ) in foundation filling and mass concrete for post holes complete all as specified and as directed.
M & L for mild steel angle, flat work and other steel Sections as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or rivetting etc conforming to Fe-290 Gde E-165 complete all as specified and as directed.
S&F in repair MS galvanised chain link fencing with exc 3mm dia wire of 75 x 75 mesh size any type standard fixed with angle iron post and MS flat complete all as specified and as directed.
S&F Mild steel screw bolts (machine made) 11 mm to 15 mm dia exceeing 5cm & n exc 10cm long with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and as directed.
M&L for RCC nominal mix type B1 1:2:4 (20mm graded aggregate) including formwork to flat surfaces to sides of concrete as in Columns ,beams, chhajas and slabs including demolition of existing RCC and removing the rubbish off the premises complete all as specified and as directed.
M&L mild steel TMT bars 10 mm dia and over cut to length, bend to shape required, incl cranking bending spirally for hooking for column, hooking ends and binding with 0.9 mm dia annealed wire confirming to ISI complete all as specified and as directed.
M&L Welding in repairs n. exc 2.5cm in length for thickness of metal to be welded not to exceed 6mm
S& F in repairs health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tune and ABS wall hook including masking connections and fixed in position complete all as specified and as directed.
I P Constructions
M/S L M Chourasia
SHREE CONSTRUCTIONS
M/s VILAS RATAN MENDHE
RAJ ENTERPRISES
Chhabra Enterprises
SHREE SIDDHIVINAYAK TRADERS
M/s Prakash Agencies
SHRI RANI SATI TRADERS
Bidder Name
M/S L M Chourasia
RAJ ENTERPRISES
SHRI RANI SATI TRADERS
SHREE CONSTRUCTIONS
SHREE SIDDHIVINAYAK TRADERS
M/s VILAS RATAN MENDHE
M/S Ramakant Chourasia
M/s Prakash Agencies
Chhabra Enterprises
I P Constructions
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .