PROVISION OF WASHING PLATFORM WITH ROOF AND WATER CONNECTION AT 689 TK TPR ASC AND PROVISION OF CHAIN LINK FENCE IN VICINITY OF FAMILY QTRS AT MIL STATION BIKANER UNDER GE (N) BIKANER

Amount

Excavation in trenches not exc 1.5m wide and not exc 1.5 m in depth in any type of soil all as specified.

Excavation over area n exc. 1.5 m deep and getting out in soft soil.

Excavation over area exc. 1.5 m but n exc 3 m deep and getting out in soft soil.

M&L Plain cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foundation, filling, sub base and mass concrete all as specified.

M&L for brick work with sub class B bricks (old sized) straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specifeid.

Returning filling in including spreading levlling ,watering and well ramming in layers nexc 25cm thick .

Removal of excavated material to a distance nexc 50 m and depositing at a level nexc 1.5 m above the starting point.

M&L Stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specifeid and as directed.(Metalic floor harder will be measured and paid separatly).

Supply only Metallic floor hardener.

M&L 100 mm thick plain cement concrete type B-1 ,1:2:4 , using 20 mm graded crushed stone aggregate as in flooring .

M&L 100 mm thick plain cement concrete type D-2 ,1:4:8 , using 40 mm graded crushed stone aggregate as in sub base flooring .

M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified .Make :- CRIL(Colour roof India Ltd)/ Unimet /JSW Coloron Plus)

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even without using extra cement.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished smooth and even without using extra cement.

M&L for sand filling under floors, cushning under interlocking tiles or in foundations incl watering and consolidations complete all as specified and directed.

M&L hardcore of broken stone aggregate gauge nexc 63mm , deposited , spread and levelled in layers nex 15cm thick watered and rammed to a true surface

M&L Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

M&L for preparing new plastered surfaces and applying two coats of cement base paint on surfaces of walls.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges where directed and providing 6 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by weight) complete.

M&L Preparing new surfaces of steel of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer

M&L Mild steel TMT steel bars 10mm dia and over cut to length bent to shape reqd incl cranking bending spirally for hooping for columns hooking ends and binding with m.s wire annealed not less than 0.9mm dia.

M&L Mild steel TMT steel bars 6 to 8mm dia cut to length bent to shape reqd incl cranking bending spirally for hooping for columns hooking ends and binding with m.s wire annealed not less than 0.9mm dia

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

Supply only liquid water proofing compound

M&L for reinforced cement concrete M-25 Design Mix in foundations ,footings , bases of coloumn, plinth beams etc all as specified

M&L for reinforced cement concrete M-25 Design Mix in Columns, pillars, piers, posts and struts etc all as specified

M&L for reinforced cement concrete M-25 Design Mix in Beams, cantilevers, bressummers, lintels over 1.5m span etc all as specified

M&L for reinforced cement concrete M-25 Design Mix in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

M&L Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter .

M&L Form work to sides of pillars, posts, struts, piers, columns and stanchions.

M&L Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.finished rough.

M&L Form work to soffits of suspended slabs such as roof slabs floor slabs and similar work nexc 200mm thick finished rough.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished smooth and even without using extra cement.

M&L Steel water tubing 40 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows , tees, short pieces, connectors, back nuts, diminisher etc ).

M&L Steel water tubing 25 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows , tees, short pieces, connectors, back nuts, diminisher etc ).

S&F Stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle , screwed both ends for iron pipe or for unions of 40 mm dia all as specified

S&F Stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle , screwed both ends for iron pipe or for unions of 25 mm dia all as specified

Surface excavation not exceeding 30cm deep and averaging 15 cm , getting out in any type of soil.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in any type of soil

M&L Cement concrete Type C2 1:3:6 using 40 mm graded stone aggregate)in pillars, boundary pillars and posts (including caps and bases)

M&l Mild steel angles, joist ,channels as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.

M&L Preparing new surfaces of steel of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer

M&L Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Supply only Chain link MS galvanisd fencing, any size or type.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

Mild steel in flat, round or square bars, in available lengths Fe 410-W (Gde-E- 250) quality- A.

M&L Mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M&L Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers 22and one hexagonal or square nut, length of bolt exc 15cm but n exc 22.5 cm long

SHREE GURU NANAK CONSTRUCTION COMPANY

VIJAY KUMAR SHARMA

M/S BUDHRAM BISHNOI