WBPHE/EE/MMD/NIeT- 07 OF 2025-26

Removing old paint from blistered painted surface with application of soda, sajimati or any approved chemical paint remover and exposing the original surface including cleaning and thorough washing to remove all traces of the removing agent including taking out shutters and refixing the same where necessary (p.w.d schedule page - 203)

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) 4 mm thick (p.w.d schedule page - 205)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : Two coats (white in shade) (p.w.d schedule page - 200)

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) Standard Quality (p.w.d schedule page - 201)

Washing & cleaning the wall surface & ceiling by soft detergent powder & soft water & render the surface free of dust, stain etc (p.w.d schedule page - 204)

Dismantling carefully wooden walling, flooring of ceiling and stacking dismantled materials as directed. (p.w.d schedule page - 13)

Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floo 12mm thick (p.w.d schedule page - 173)

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in charge.The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor (1) Thickness of laminate 1.5mm (p.w.d schedule page - 179)

Supplying 4 lever mortice lock or any approved make and brand as per direction of the Engineer- in -Charge. 100 mm. (p.w.d schedule page - 243)

A)Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete 100 mm grip x 10 mm dia rod. (p.w.d schedule page - 145)

B) Worddoor lock and key (brass concrete )

C)Brass hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.200mm long (p.w.d schedule page - 142)

D) 50 mm dia brass kora

Supplying fitting, fixing the metarials noted above item No. a) to d) as aper direction of EIC

Ritesh Enterprise (BID ID -6670822)

MAHALAKSHMI ENTERPRISE (BID ID -6671020)