Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.3 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹38.3 L+₹3.5 L (10.2%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹39.1 L+₹4.3 L (12.2%)Rejected-AOC 3 107 HOUSING BOARD SRI GANGANAGAR PIN 335001 RAJ | GANGANAGAR | RAJASTHAN | 335001 | L3 | Rejected-AOC Other than lowest bidder | |
| 4 | L4₹39.9 L+₹5.1 L (14.7%)Rejected-AOC NEW ABADI KISHANPURA SURATGARH 335804 DISTT SRIGANGANGAR RAJ | GANGANAGAR | RAJASTHAN | 335804 | L4 | Rejected-AOC Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
7 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Priyesh Srivastava
GE (AF) SURATGARH
REPAIR/REPLACEMENT OF B/R SERVICES IN E/M INSTALLATION IN DOMESTIC AREA AND REPAIR TO PLASTERING,PLINTH PROTECTION AND OTHERS MISC B/R WORK IN ZONE C MARU VIHAR AT AF STN SURATGARH
2023_MES_613212_1
8104/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) SURATGARH
AS PER TENDER DOCUMENTS
10 documents required · 10 mandatory
₹500
GE (AF) SURATGARH
₹80,000
Yes
25 Sept 2023
10 Aug 2023
9 Sept 2023
10 Aug 2023
7 Sept 2023
24 Aug 2023
Amount
BOQ (REPAIR/REPLACEMENT OF B/R SERVICES IN E/M INSTALLATION IN DOMESTIC AREA AND REPAIR TO PLASTERING,PLINTH PROTECTION AND OTHERS MISC B/R WORK IN ZONE 'C' MARU VIHAR AT AF STN SURATGARH )
Taking out/striping out of loose/damaged/breaked concrete of all existing roof treatment including concrete padding and benching including hacking for key, scrubbing down with water for receiving plaster without damaging existing serviceable structure complete to receive new roof treatment including rubbish off the premises upto a distance exc 250 mtr but n.exc 500 mtr complete all as specified and directed by Engr-in-Charge. (Note : The serviceable treatment should not be disturbed during taking out of damage roof treatment. The new treatment shall be bonded monolithic and casted accordingly before completion of work).
M&L for 25mm thick PCC (1:2:4) Type B-0 (using 12.5mm graded stone aggregate) pedding mixed with Dr Fixit as concrete admixture) as in roof top, kerb/benching alongwith parapet including rounded, chamfered on edges complete all as specified and directed by Engr-in-Charge. (Note : Proportion of mix and method of mixing of approved concrete admixture should be applied as per manufacturer's printed instructions)
M&L for 15 mm thick rendering in cement mortar 1:4 on roof surface using water proofing compund as per manufacturer instruction surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for Water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of cleaning of concrete or plaster surface of roof and applying evenly a bitumen primer conforming to IS 3488@ 0.30Kg per sqm followed by a tack coat @ 1.2kg per Sqm using 85/25 grade industrial hot blown bitumen over it laid with APP modified polymeric water proofing membrane minimum weight 3.6kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 gm per sqm) unrolled & bonded to substrate with longitudinal and end laps 100mm as per manufacturer's instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.2 kg sqm and as per manufacturer instruction and including taking the APP membrane will be required where the parapet wall exceed 45cm for carrying over and taking into parapet walls, cut out neatly a horizontal groove 6.5 cm deep, 7.5 cm wide section with lower edge at not less than 15 cm above the graded roof surface and groove shall be finished smooth with cement mortar 1:4 with WPC @3% by weight of cement where the parapet wall height is 45cm or less no groove will be required as the water proofing treatment will be carried over the top of parapet wall to its full thickness, complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, arches , pillars etc but excluding precast concrete articles, complete all as specified and directed by the Engineer-in-Charge.
M & L, Brick work with sub class 'B' bricks , straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 , complete all as specified and directed by Engineer-in-Charge.
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing ),and removing rubbish off the premises , complete all as specified and directed by Engineer-in-Charge
M&L for First quality glazed ceramic coloured tiles of (450x350mm) x 7 mm thick, laid on vertical surfaces of wall such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles ,complete all as specified and directed by the Engineer in Charge.
M&L for First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed by the Engineer in charge.
M&L for First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles ,complete all as specified and directed by the Engineer in Charge.
M&L factory made Machine pressed precast concrete interlocking paver block any shape or size conforming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and no pigment laid over 25mm thick sand layer complete all as specified and directed by Engr-In-Charge. Note : Sand will be measured and paid separately
M & L for Sand filling under floors 25 mm thick tibba sand cushioning and filling the joints upto full depth with fine tibba sand complete all as specified and as directed by Engr -in -Charge.
M & L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, surface drain, wall, mass concrete and retaining wall etc complete all as specified & directed.
M&L for PCC 1;2:4 type B0 (using 12.5mm graded crushed stone aggregate) as in coping, benching etc complete all as specified and directed by Engr-in-Charge
Material and labour PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in channel and drain complete all as specified & directed.
Taking down cement plaster on brick walls & concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land ,complete all as specified and directed by the Engineer in Charge.
M&L for Rendering 10 mm thick cement plaster in cement mortar (1:6) on fair faces of brick works or concrete surfaces , finished even and smooth without using extra cement , complete all as specified and directed by the Engineer-in-Charge.
M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of roof projection, ceiling, facia etc including repairing of broken portion up to 6m height and surface finished even and smooth without using extra cement, complete all as specified and directed.
M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , finished even and smooth without using extra cement,on external surfaces at any height upto 10 metre, complete all as specified and directed by Engineer-in-Charge.
Material and labour for rough cast plaster with a mixture consisting of crushed stone or fine gravel aggregate of size 6 to 8mm as directed, mixed with coarse sand and cement in the ratio 1:1:1, finshed even over rendering with under coat 15mm thick cement and sand mortar 1:4, complete all as specified and as directed.
M&L for Preparation of new plastered wall surfaces and applying two coats of exterior acrylic emulsion paint (in camouflage pattern using number of colours) , complete all as specified and directed by the Engineer-in-Charge.
M&L for Preparation of new plastered or un plastered wall surfaces of any description and applying two coats of oil bound distemper over a coat of Chalk whitening , complete all as specified and directed by the Engineer-in-Charge
M&L for Preparation of new surfaces of ceiling,chajja etc, including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying three coats of white wash, complete all as specified and directed by Engineer –in-Charge.
M&L for complete removal through mechanical scraper machine of existing any type of treatment of wall and applying 1.00- 1.5 mm JK Birla wall care putty and rubbing of wall through sand paper to receive smooth finishes and applying two coat oil bound distemper with painting roller, complete all as specified and directed by Engr-in-Charge.
M&L for Preparation of old surfaces of walls including brooming down or steel wire brushing , scraping down smoke soots , moulds, mass and efflorescence salts and trading oils and greasy spots etc, and applying one coat of oil bond distemper of approved shade, complete all as specified and directed by Engineer-in-Charge
Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling and floor etc., including cutting/chasing in wall/floor and removal from site, complete all as specified and directed by the Engineer in Charge.
Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling and floor etc., including cutting/chasing in wall/floor and removal from site, complete all as specified and directed by the Engineer in Charge.
S&F Steel water tubes, 15 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed by the Engineer in Charge.
S&F Steel water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed by the Engineer in Charge.
Re-fixing steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified and directed by the Engineer in Charge.
Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified and directed by the Engineer in Charge.
Cutting chases pinning in making good to facing where required and pointing in CM (1:3) for concealed water tubing etc as in brick walls exc 10 cm but not exc 20 cm girth complete all as specified & directed.
S&F in repair Stop valve/Angle valve 15 mm dia cast copper alloy , chromium plated fancy type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge.
S&F in repair Pillar taps, 15 mm bore cast copper alloy chromium plated , with capstan heads, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed by the Engineer in Charge.
S&F in repair Bib taps,15 mm cast copper alloy,chromium plated ,fancy type ,screwed down , screwed for iron pipe , complete all as specified and directed by the Engineer in Charge.
S&F in repair Wash basins, vitreous china, white, flat back of size 550x400 mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32 mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32 mm dia HDPE waste pipe and including new brackets , complete all as specified and directed by the Engineer in Charge.
S&F in repair Vitreous china squatting pan Orissa pattern size 580x440 mm white with integral foot rest (exclusive flushing cistern & flush pipe) including cast iron 'P' or 'S' trap of 100 mm bore pipe fixed in PCC 1:2:4 type B-2 and necessary lime concrete, fixed as in repairs, including making good the surface to match with existing floor finish fixed as in repair ,complete all as specified and directed by the Engineer in Charge.
S&F PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level fixed in repair , complete all as specified and directed by the Engineer in -Charge .
S&F in repair PVC connection of PTMT, non corrosive with nuts and washers on both ends,600 mm long , complete all as specified and directed by the Engineer in -Charge .
Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, from chowkhat, complete all as specified and directed by the Engineer in Charge.
S & F Factory made 35 mm thick plain, framed, panelled shutters ( any number No of panels) with panels of timber flat on both sides (feather edges), or of veneered partical boards medium density, wood partical boards with commercial face veneeres, supplied and fitted to chowkhats of 2nd class hard wood (hollock) , complete all as specified and directed by Engineer-in-charge.
Dismantling structural steel work in including doors, window, gates ,angles but excluding framed truss etc. , complete all as specified and directed by Engineer-in-Charge.
S&F Mild steel framed work such as in doors/chowkhats or gates of angle or other section with gusset plates, rail, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening & fixing and similar work conforming to Fe-290 grade E-165 , complete all as specified and directed by Engineer-in-Charge
M & L for factory made steel windows box type using ERW hollow 'P' section comprising double frame for glazed and gauged skelton shutters jointed interally with flat iron 40x4 mm complete including grill of 10 mm square bar, fixed horizontally @ 10cm centre to centre hinges, handle, tower bolts, lugs etc with/Without Cooler Provision complete as all specified and directed. Note:- (i) For the purpose of measurement and payment double shutter with frame shall be consider as one unit. (ii) Glazing and wire mesh shall be measured and paid for separatley in respective of item.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling our glazing pins / spring clips providing and fixing new one , complete all as specified and directed by Engineer-in-Charge.
S&F, Sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and directed by Engineer-in-Charge.
S&F Aluminium handles ,plate cast type anodised of 150 mm size , complete all as specified and directed by Engineer-in-Charge.
S&F Aluminum anodizes barrel tower bolts of extruded section and fixed of 200 mm size, complete all as specified and directed by Engineer-in-Charge
S&F Butt hinges medium weight cold rolled mild steel of 100 mm size and fixed ,complete all as specified and directed by the Engineer in Charge.
S&F in repairs of mild steel sliding door bolt 300 mm long stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on stapple plate complete all as specified and directed by Engineer-in-Charge
S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed by Engineer-in-Charge.
M & L for Preparing new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer , complete all as specified and directed by Engineer-in-Charge.
M & L for Preparation of new wooden surfaces of any description, exceeding 10 cm width or girth of any description and applying two coats of synthetic enamel paint over one coat of pink primer , complete all as specified and directed by Engineer-in-Charge
S&F Stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen or with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32 mm fixed as in repair and making good to disturbed surfaces, complete all as specified and directed by Engineer-in-Charge.
Dismantling existing water storage tanks exc 250 litres but n.exc 500 litres capacity by disconnecting existing water connection and removal from site , complete all as specified and directed by Engineer-in-Charge
S&F Rotational moulded PVC, white colour, tripple layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve , complete all as specified and directed by Engineer –in-Charge.
Excavating in trenches n.exc. 1.5m wide and n.exc. 1.5m in depth for foundation etc n.exc. 10Sqm on plan and getting out in soft/loose soil complete all as specified and as directed by Engr -in -Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm of soft/loose soil complete all as specified and as directed by Engr -in -Charge.
Removing of excavated material or soil n.exc 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and as directed by Engr -in -Charge.
Demolition of RCC of any description in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engineer-in-Charge
M& L for precast cement concrete 1:2:4 type B1 (using 20mm graded aggregate) as in slab/manhole cover set in CM 1:4 complete all as specified and directed by Engr-in-Chage
Use and waste form work to edge of concrete flats, breaks in floors, opening in concrete walls,floors and roofs and side of RCC/PCC bands in walls and similar works exc 10cm but n exc 20cm thick, complete all as specified and as directed by Engr -in -Charge
S&F mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking bending spirally hooping for columns and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and as directed by Engr -in -Charge
S&F mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape requred, including cranking bending spirally hooping for columns and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and as directed by Engr -in -Charge.
Dismantling of asbestos cement (Corrugated, semicorrugated etc) sheets in roof coverings complete all as specified & directed.
M&L for 6mm thick asbestos cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with L hook or Cranked bolts, complete all as specified and directed.
S&F in repairs PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors,Walls complete all as specified & directed.
S&F in repairs 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15 cm thickness (below or above ground level), including removal of rubbish outside MoD land, complete all as specified and directed by the Engineer in Charge.
M&L for 75 mm thick cement concrete 1:3:6 type C1, using 20mm graded crushed stone aggregate as is plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement complete all as specified and directed
M&L for plain cement concrete 1:4:8 type D-2, using 40mm graded mechanically crushed stone aggregates 75mm thick as in sub base or in mass concrete or in base layer, complete all as specified and directed be Engr-in-Charge
M&L for 25mm thick cement concrete 1:2:4 type B-1 (20mm graded crushed stone aggregate as in leveling course surface finished fair and even without using extra cement , complete all as specified and directed by Engineer-in-Charge
M&L for Preparation of new plastered or unplastered surfaces of wall and applying two coats of oil emulsion distemeper over one coat of priming and over and including 1-2mm thick JK/Birla wall care putty to achieve smooth finish surface,complete all as specified and directed by Engineer –in-Charge.
Dismantling of pavers blocks/tiles of any description or thickness in floors, aprons etc. laid dry or pointed, complete all as specified & directed.
M&L for Plain cement concrete type B-1(1:2:4) using 20 mm graded stone aggregates as bed block ,coping , cills, steps etc , complete all as specified and directed by Engineer-in-Charge.
Demolition of stone slabs/paver block and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed.
M&L for machine cut polished kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 20mm thick screed bed in cement mortar 1:6, rubbing, grinding and polishing to achieve mirror finish, complete all as specified and directed.
M&L for polished kota stone slab 18 -20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 10mm thick rendering in cement mortar 1:6, rubbing, grinding, rounding of edges and polishing to achieve mirror finish, complete all as specified and directed. Note : Kota stone shall be laid in one piece for treads and risers for step, window cills and moulding/rounding of edge properly.
M&L for Dholpur stone as on wall cladding with machine cut face work , arches hexagonal roof pillar and all facing etc of 15 to 18mm thick one side single length laid and jointed with screw to wall in cement and sand mortar 1:2 including ardelite chemical and recess pointed with an admixture of white cement and dholpur stone dust 1:1 and making edges, work in small patches including preparing the existing wall surfaces, in any height complete all as specified and directed by Engr-in-Charge
M&L Granite 20 mm thick of any type work(table rubbed and polished) in steps, jambs,pillars windows cill cooking platform and like including pointing in white/colour cement and pigment to match with shade of granite including bull nosing of external, complete all as specified and as directed. complete all as specified and directed.
S&F toughened glass frameless partition (area of single partition upto 10 sqm )with fixed portion of 12 mm thick glass including cutting holes edges rounded and etching works etc and all kind of SS patch fitting & fixture spinder patch etc complete all as specified and directed .Make : Modiguard . Saint Gobin , Triveni float glass.
S&F, aluminium powder coated chowkhats of 100x44x1.5mm section with rebate, complete all as specified and as directed.
M&L 5.5 mm thick tinted glass including necessary clips, rubber packing & aluminium beading (aluminium frame ), complete all as specified and as directed.
Supply fabricating and fixing of aluminium door powder coated of extruded aluminium section, vertical style of door shutter of size 85mmx44.45mmx1.5mm thick. Top, middle and bottom rail of size 85mmx44.45x1.5mm thick and fixing plain/tinted sheet glass with aluminium beading and rubber gasket/beading as directed One mortice lock for aluminium door (each), and three nos aluminium hinges of size 100mm and two aluminium tower bolts of 250mm size and 02 nos american type hinges of size 250mm for each door fixed with rawl plug including rectification of floor/wall to match the existing surfaces, complete all as specified and as directed by Engineer-in-Charge at site. (Cost of sheet glass Plain/frosted shall be measured and paid sepearately )
S&F aluminium powder coated glazed three track sliding window of frame 100 x 44 x 1.5mm and sliding shutter of section 40mm x 19mm including 3mm thick sheet glass, ordinary quality exceeding 0.5 Sqm in each pane, in two track shutter and in one track stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, including all fittings such as aluminium handle of size 100mm and locking arrangements with each moving leaf, complete all as specified and as directed.
Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.
AK CONSTRUCTION
SHILPI CONSTRUCTION COMPANY
M/s JUGAL KISHORE MISHRA AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .