Special repair to Bldg No P-7under GE West Jalandhar Cantt

Amount

Demolition of cement concrete at any position and removing surplus spoil/debris out of Defence Land complete all as specified and directed

M&L for 25 mm PCC 1:2:4 type B0 using 12.5mm graded aggregate to receive the top layer of tiles complete all as specified

Dismantling of brick tiles single layer as in roof covering complete all as specified

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) all as specified.

M&L for 3mm thick superior Atactic Poly propylene modified polymeric memberane waterproofing treatment of wieght not less than 3.0 Kg per sqm with properties of high penetration and the centre core consisting of 90 micron high molecular - high density polyethylene (HMHDPE) film consisting of five layers. The superior multi polyplus is to be laid after preparing the surface over and including a coat of bitumen primer @0.30 Litre per sqm over and including a coat of hot applied Blown bitumen of grade 85/25 multi polyplus are minimum 10 cm seam in width/lengthwise complete all as specified and all as manufacturer's directions.

M & L for 15mm thick rendering on concrete surfaces finished even and smooth without using extra cemet in cement mortar 1:4 as in roof/sunken floors and using WPC 3% by wt of cement complete all as specified Note : WPC shall be measured and paid separately .

M & L brushing neat cement slurry with 3kg of cement per sqm including cleaning and washing in roof surface complete all as specified.

M & L PCC Padding with cement concrete type B-I (1:2:4) 20mm graded aggregate to bring top surface of slab in slope complete all as specified

M & L 40mm thick Brick tiles laid on bedding layer of CM 1:3 15mm thick and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement over APP membrane complete all as specified

All as per item No 9 above but except tiles complete all as specified

M & L for flush pointing in CM 1:3 to brick tiles laid flat in roof or paving incuding raking out joints complete all as specified and directed.

Taking down cement plaster of any description any thickness /dado/Skirting/ including raking out joints hacking for key scrubbing down with water complete all as specified.

M&L for 15 mm thick cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement all as specified

M&L for 15 mm thick cement mortar 1:4 on brick or concrete surface finished even and smooth without using extra cement all as specified

M&L for plastering 5mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling surface complete all as specified

M&L for repairing of R.C.C projections, chajjias, roofs, facia etc by necessary preparation. Scrapping, cutting, chiseling derusting and cleaning exposed reinforcement, surfaces of damaged, loose R.,C.C surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh (If Reqd) of weight exc 2 kg per sqm but n.exc 3kg/sqm with or without facia and finished with cement and sand motar (1:3) using coarse sand and work in patches area n.exc 5 sqm each and thickness of R.C.C member n.exc 70mm including necessary form work and applying two coats of finishes to match with the existing surfaces at any height complete all as specified and directed by Engr-in-charge. (Note : Welded mesh shall be measured and paid for seperately)

M&L for preparing new plastered surfaces of walls by applying two coats of oil bound distemper with chalk whitening on plastered surface preparatory to distempering complete all as specified.

M&L for preparing new plastered surfaces of wall and applying two coats of cement base paint over one coat of primer all as specified and directed by Engr -in-charge.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling surface as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment on wall surfaces and applying three coat of white wash all as specified and directed by Engr-in-Charge.

All as per item No. 20 here in before but single coat of white wash on ceiling surfaces all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatments on wall surfaces and applied two coat of cement base paint over one coat of primer all as specified and directed by Engr -in-charge.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and disposal of rubbish outside MOD land complete all as specified

M&L for non-skid ceramic joint free coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick bedding layer CM 1:6 complete all as specified.

All as per item No. 24 above but in skirting overand including 10mm thick rendering as backing coat in CM 1:4 complete all as specified.

M & L for vitrified ceramic tiles light shade 9 to10 mm thick (Square/rectangular) polished area of each tiles not exceeding 0.36 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm th screed bed in CM 1:6 complete all as specified.

All as per item No. 26 above but in skirting over and including 9 to10mm thick rendering as in CM 1:4 complete all as specified.

M&L for coloured glazed tiles of size 450x350x 7 mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 using 20 mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies , canopies , deck slabs and in shelves and the like complete all as specified and directed.

M&L for mild steel high yield strength TMT bars 10 mm dia and over cut to length bent to shape required including, cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed

All as per item No. 31 above but 5mm dia and over and including 10mm dia stirrups, spacers and binders complete all as specified and directed

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, shelves , landing and similar work not exceeding 200 mm thick (horzontal or sloping) and to edges of concrete complete all as specified and directed

M&L for 50mm thick PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection and path finishing the surfaces even and smooth without using extra cement all as specified

Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excluding precast concrete articles all as specified.

M&L for brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

All as per item No 36 above but using old bricks complete all as specified and directed.

M&L for half brick thick wall using with sub class 'B' old size bricks straight or curved on plan to any radius with old size brick thick walls built in cement mortar 1:4 all as specified.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each complete all as specified.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area exc 1.5 Sqm but not exc 4 sqm complete all as specified.

Taking down shutters of any description/type (Wooden/PVC/Aluminum) exc 1 Sqm but not exc 2 Sqm each and refixing to same opening including resecuring or easing and adjusting complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm nexc 2 Sqm each and removing from site complete all as specified and directed.

All as per item No 42 above but shutters of any description area not exc 1 sqm complete all as specified and directed

M&L for anodised aluminium frame for doors,windows, partitions ,ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F Anodised aluminium door shutters ,aluminium section weighing 0.55 kg/m including necessary joining cleats ,glazing clips, rubber neoprene packing, hanndles 2 Nos in each door, butt hinges, anodised aluminium snap beading screws etc complete all as specified.

M&L for mild steel framed work as in door frames, chowkhats including necessary cutting, welding, bending, drilling etc., conforming to Fe 290, Gde E-165 complete all as specified and directed.

Supply and fix 30mm thick flush shutters, solid core construction, with block bopard core and plywood face panels commercial type on both sides complete all as specified and directed.

Supply and fix 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a).

S&F mild steel helical door spring 150 mm long including roller plate, complete all as specified and directed.

Supply & fix Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of gauged skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3.

All as per item No. 51 above but as in glazed windows. as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3. Note for item No 51 & 52 :- Glass / wire gauge/painting shall be measured and paid separately. Drg No CEJZ/TD-1019 & 1020, Sheet 1/3 to 3/3 are not being uploaded and the same can be seen in this HQ on any working day

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars barred iron doors;ladders; framed balusters walk ways railings framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified.

S&F steel ventilator with top hung shutter including hinges steel peg stay complete.

M&L for preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified

S &F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS square tube, suppling and fixing in opening as per manufacturer's instructions.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per manufacturer's instructions.

S&F floor door stopper aluminum alloy body anodized with hard drawn steel spring overall length 150mm complete all as specified and dierected.

S&F door closer of aluminium (extruded section) body hydraulically regulated universal type ,suitable for door shutters of 701 to 850 mm in width and of weight between 36kg to 60 kg and fixed complete all as specified and dierected.

M&L for Preparation of new wood and wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and dierected.

M&L for mild steel work as in holdfasts, knee piece and similar small article complete all as specified.conforming to Fe-290 Gde-E-165 complete all as specified and dierected.

S&F 300mm long Aluminum alloy, anodized sliding door bolt with hasp & staple (bolt type) fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and dierected.

Supply & Fixing 100mm size butt hinges extruded aluminum alloy with galvanised mild steel hinge plate complete all as specified and dierected.

S&F Aluminum anodized barrel tower bolt of extruded section of size 150mm complete all as specified and dierected.

S&F extruded aluminum alloy handle fabricated of size 150mm complete all as specified and dierected.

M&L for PCC (1:2:4) type B-1(using 20 mm graded stone aggregate) as in roof kerbs, mud stops, coping, cover fillets of radius 75 mm provided at junction of parapet walls etc edges of concrete rounded or chamfered complete all as specified and directed .

Taking up of or down steel tubing and connections 15mm bore/20 mm bore and connections, including cleaning for refixing or removing to store yard complete all as specified and directed,

S&F 15mm bore galvanized iron tubes medium grade with all fitting and fixed to walls, ceiling or laid in floor complete all as specified.

All as per item No 69 but for 20mm bore tube complete all as specified.

Refixing only old steel tubing in new or old position (wall/ceiling/floors etc) including new fittings 15 mm bore pipe complete all as specified directed

Refixing only old steel tubing in new or old position (wall/ceiling/floors etc) including new fittings 20 mm bore pipe complete all as specified directed

M&L for cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting n exc 10cm girth. pinning in, making good to facings where required and pointing in CM 1:3 on brick walls.

S&F in repair Stop valve, 20 mm dia cast copper alloy with long shank & cup with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 20mm bore iron pipe fixed complete all as specified directed

S&F in repair 15mm dia angular stop valves, fancy type chromium plated, with long shank and cup(concealed) screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified directed.

S&F in repair 15mm stop valves/Angle cock , fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified directed.

S&F in repair Bib tap fancy type cast copper alloy suitable for 15mm bore iron pipe with long body fancy type fixed complete all as specified directed.

Supply & fix in repairs squatting pan WC Orissa pattern size 580mm x 440mm white with integral foot rest (excluding flushing cistern) with P or S trap including provision of lime concrete bedding including breaking up existing damaged WC seat and connecting flush pipe etc making good to match with existing surfaces complete all as specified and directed.

S&F in repair PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe 10 Ltr capacity complete all as specified.

PVC connection fiber, reinforced 450 mm long with brass check nut and PVC washers at both ends complete

S&F Hot and cold mixer fancy type single or double legged cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed to wash hand basin complete all as specified

Supply & fix in repairs vitreous China wash hand basin white flat back, size 550mm x 400mm, cutting for and pinning in ends of brackets Including 32mm bore waste pipe, brass coupling, ,chromium plated brackets, restoring all connections complete all as specified.

Disconnecting existing water tanks of any capacity exc 500 & n exc 1000 and removing to store complete all as specified and directed.

Supply & fix in repairs rotational moulded polythene water storage tank double layer, ISI Marked of capacity 1000 litre cylindrical vertical with closed top hoisted in position complete complete all as specified and directed.

S&F 20mm bore ball valve brass high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F 20mm bore gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed..

Supply & fix in repairs toilet paper holder vitreous china, box type fixed to walls with chromium plated brass screws complete all as specified.

S&F Acrylic shelf 450mm long and 100mm wide fixed over WHB of approved quality complete all as specified and directed Engr-in-charge.

S&F corner set of 3 acrylic shelf 12" x12" with brackets including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F CP grating 150mm dia complete all as specified and directed by Engr-in-Charge

S&F chromium plated towel rack 600 mm long of approved quality complete all as specified and directed.

Dismantling of 100mm/75mm/50mm dia PVC/ cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches or taking out of walls, if required complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) pipe of pressure rating 6kgf/cm2 single socketed in any length with rubber ring joints jointing with adhesive to wall/laid in trenches complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends in any radius complete all as specified and directed.

S & F PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 110 mm bore complete all as specified and directed.

S & F 75 mm bore PVC (SWR) pipe of pressure rating 4kgf/cm2 single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends in any radius complete all as specified and directed.

S & F PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 75 mm complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor trap with grating including joining to waste pipe fixed in solvent cement incl taking down damaged floor trap in any position complete all as specified and directed.

S&F 110mm dia PVC (SWR) floor trap with grating including joining to waste pipe fixed in solvent cement incl taking down damaged floor trap in any position complete all as specified and directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white including bolts, flushpipe of polyethylene of low or high density or PVC 32mmdia anti syphonage pipe etc complete all as specified and directed.

Supply and fixing plastic water closet seat cover closed patern with flat bottom and cover and mild steel chromium plated or aluminised hinging devices complete all as specified and directed.

S & F brass chromium plated jet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge.

M&L for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as specified and directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint as directed all as specified.

Supply only Integral water proofing compound conforming to IS-2645.complete all as specified.

S&F 4 mm thick size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer E-Board Classic to be fixed on GI powder coated grid/section size 600mmx600mm with main runner of size 38x24x0.9mm thick, cross tee 28.6x24x0.9 mm and wall angle 19x19x0.9 mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including provisions for light fixtures of any size complete all as specified and as directed.

All as per item No.108, here-in-before but to be fixed to existing grid/section including tightening and making good alignment of grid complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, PVC, pulp, insulation, Gysum board etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M & L for solid PVC wall lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and frame as per specifications and drawing

M&L for 5 mm thick PVC sheet fillet of width 35 mm for wall panelling including fixing to wall to make PVC frame as per specification and drawing.

Material & labour for stack clamps made out of 25 x 5mm flat iron and 16mm dia round iron stays including nuts and bolts and securing end of stays to wall or in roof, complete all as specified and directed.

S&F vertical type locks in aluminium door 100 mm long of mild steel 4 levers with two keys complete all as specified and directed.

Material & labour for repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm including applying two coats of finishes as provided to the existing surfaces to match with the existing surfaces in at any height complete all as specified and directed.

Taking down carefully existing point wiring aluminum/ copper conductor for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, lights fitting, regulator, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Material & labour for concealed point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated and unsheathed cable 1100 volts multistranded, copper conductor cable (FRLS) drawn through and including PVC concealed conduit not less than 20mm dia bore medium grade (ISI marked) and accessories like bends, tees, junction boxes etc, fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS , copper multistranded cable as earth wire including sunken pressed steel terminal boxes and plastic laminated white/ coloured top sheet cover 3.0 mm thick , for One light point / fan point / call bell point controlled by one way switch complete all as specified and directed.

All as per item No. 116 above but one 3 pin socket outlet 5 amps on independent board complete all as specified and directed. .

All as per item No. 116 above but one 3 pin socket outlet 5 amps on same board with other switches, complete all as specified and directed. .

All as per item No. 116 above but with 2.5 sqmm multistranded copper conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board, complete all as specified and directed.

All as per item No. 116 above but with 4 sqmm cable for AC on independent board, complete all as specified and directed.

Supply and fix switch piano flush button type, 5 Amps, 230V AC, single pole, one way complete all as specified and directed

S&F socket outlet 5 amps, 5 pin flush type, complete all as specified and directed. .

Supply and fix switch socket combination outlet universal type multi purpose 6 pin 5/15 Amp flush type 230/250 volts AC with ISI marked complete all as specified.

Supply and fix SPN enclosure with two pin and earth plug and socket complete with and including one MCB 20A all as specified.

Taking down u/s sub main wiring of any size all as specified.

Material & labour for submain wiring with two runs of single core 2.5 Sqmm (nominal area) PVC insulated multistranded copper conductor cable (FRLS) drawn through and including 20 mm dia. PVC rigid concealed conduit and conduit accessories and 2.5 sqmm PVC insulated copper wire for continuous earth continuity conductor all as specified and directed by Engr-in-charge. Note : Two run of 2.5 sqmm cable and one run of 2.5sqmm along with 20mm dia PVC conduit will be measured as one unit.

Material & labour for submain wiring with two runs of single core 4 Sqmm (nominal area) PVC insulated multistranded copper conductor cable (FRLS) drawn through and including 25 mm dia. PVC rigid concealed conduit and conduit accessories and 4 sqmm PVC insulated copper wire for continuous earth continuity conductor all as specified and directed by Engr-in-charge. Note : Two run of 4 sqmm cable and one run of 4sqmm along with 25 mm dia PVC conduit will be measured as one unit.

Material & labour for submain wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated multistranded copper conductor cable (FRLS) drawn through and including 25 mm dia. PVC rigid concealed conduit and conduit accessories and 6 sqmm PVC insulated copper wire for continuous earth continuity conductor all as specified and directed by Engr-in-charge. Note : Two run of 6 sqmm cable and one run of 6 sqmm along with 25mm dia PVC conduit will be measured as one unit.

Supply and Fix batten holder, PVC/Polycarbonate type with black plate suitable for batten fittings with 15 watt LED bulb complete all as specified and directed.

Supply and fixing stepped type electronic fan regulator and connecting up complete 230/250 volts as directed by Engr-in-charge.

Supply & fix LED light fitting 22W retrofit including LED lamp with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures box type with retrofit LED rod 22 watt and connecting electrically to ceiling rose using PVC insulated overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed. Make :Havells cat part No. LUMLINEPLUSBS22WLED865SPCSS or equivalent as mentioned in appendix 'B'

Supply & fix in replacement LED street fitting 48 Watt complete in all respects pressure die cast aluminum IP-66 with surge protection device of 10KV,IK7 LED (SEOUL) 6500 and connecting including all fittings as specified and as directed.

Supply and fix ceiling rose surface bakelite 65 x 50 mm three terminal PVC / Polycarbonate isolated body complete all as specified.

S&F in repair 34 watt 2 x 2 LED ceiling light fitting with driver ultra modern designed, LED luminaire which provides soft light and glare free symmetrical illumination suitable for armstrong/grid ceiling including bracket nuts, bolts, washers as required for fixing complete all as specified and directed by Engr-in-charge.

Taking down DBs/ main switch board of any size and making good disturbed surface of wall/floor complete all as specified and directed.

Supply and fix sheet metal enclosures for DB's double door when MCCB to be used TPN 415 volts 4 way with 200 Amps rated bus bar complete with incoming/outgoing connection through proper size of lugs complete all as specified and directed.

Supply & fix isolator TPN 63 amps 415 Volts complete all as specified and directed.

Supply & fix DB, SPN, 12 way double door forMCB, 240 volts with 200 amps rated bus bar complete all as specified and directed.

Supply & fix isolator SPN 40 amps 240 Volts complete all as specified and directed.

Supply & fix MCB SP 6 to 32 amp B curve complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continuous earth wire on pole/DBs, testing the earthing after completion complete all as specified and directed. Note :- (I) Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit (II) PCC chamber shall be (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways complete all as specified and directed. .

Supply and laying 25mm dia GI tubing 'light grade' galvanised, with all necessary fittings laid in trenches/under road crossing/ fixed complete to poles/DB for cable protection complete all as specified and directed.

Supply and laying 40mm dia GI tubing 'light grade' galvanised, with all necessary fittings laid in trenches/under road crossing/ fixed complete to wall and ceiling or laid in floors etc complete all as specified and directed.

M&L for fixing on board with 5 amp switch & socket outlet -04 Nos and 15 amps switch & socket outlet -02 Nos complete all as specified and directed.

Supply and fixing of new generation, post top, energy saving spun aluminium landscape luminaires with high power 40W suitable for pole dia 76 mm conforming to IP 65 ruby (Clear) complete all as specified and directed. Make : Havells cat part No. LHEVBGP 7PN6K040 or equivalent make as in Appx 'B'

M/S RAJESH CONSTRUCTION COMPANY

B.P CONSTRUCTION CO

NATIONAL BUILDERS

G S TRADERS