8376 REPAIRS TO ALL TYPE OF TRADE PATTERN AND MAP FURNITURE ITEMS UNDER GE SOUTH PUNE

Amount

Chair Dinning Cushion (FD/E6/MAP/10R)

Removing existing unserviceable rear legs and providing new rear legs made of teakwood of size 45 mm x 30 mm complete all as specified and shown in drawing

Removing unserviceable front legs and providing new front legs made of teakwood of size 45 mm x 45 mm to size 45x30mm complete all as specified and shown in drawing

Removing unserviceable front/rear/side rails & providing new front/rear/side rails made of teakwood of existing size complete all as specified and shown in drawing

Removing the existing unserviceable stiffeners and providing new stiffeners made of teakwood of size 20 x 25 mm complete all as specified and shown in drawing

Removing the existing unserviceable plywood 12 mm thick and providing new plywood 12 mm of size 440 x 420 mm complete all as specified and shown in drawing

Removing the existing unserviceable foam cushion covered with black regzine and providing new foam cushion covered with black regzine of chair dining cushioned complete all as specified and shown on drawing

Removing unserviceable hard rubber rings and providing new hard PVC bush to chair dining cushioned complete all as specified and shown in drawing

Chair Computer (FD/E6/MAP/01)

Removing the unserviceable seat and providing new seat of size 510x470x60 mm made out 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all around complete all as specified and shown in drawing

Removing unserviceable back and providing new back as per existing size made out 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam Back form shall be designed with contour lumber support for extra comfort with PVC lipping all around complete as specified and shown in drawing

Removing unserviceable arm rest of chair computer and providing new arm rest of black integral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant complete all as shown in drawing

Removing unserviceable tubular frame of chair computer and providing new tubular frame cantilever type and made of 25 mm dia and powder coated for computer chairs complete as shown in drawing

Removing unserviceable hydraulic shaft of chair computer and providingnew hydraulic shaft alongwith locking system for computer chairs and as shown in drawing

Removing unserviceable adjustable backrest of chair computer and providing new adjustable backrest in the range of 65 mm and can be locked in 5 steps for better support as per existing size and shown in drawing

Removing unserviceable twin wheel castors of chair computer and providing new twin wheel castors of black colour as per existing size complete as shown in drawing

TV TROLLEY (FD/E6/MAP/04)

Removing unserviceable top of Trolley for TV and providing new top of existing size, made out 18 mm thick prelaminated matt finish MDF board with rounded edges complete all as specified and shown in drawing

Removing unserviceable drawers of Trolley for TV and providing new drawers of Trolley for TV as per existing size made out 18 mm thick prelaminated matt finish MDF board with lipping around complete as specified and shown in drawing

Removing unserviceable sides/bottom of Trolley for TV and providing new sides/bottom as per existing size made out of 18mm thick prelaminated matt finish MDF board with lipping around complete as specified and shown in drawing

Removing unserviceable Glass shutter of Trolley for TV and providing new Openable Glass shutter 5.5 mm thick with magnetic catcher and stainless steel patch fitting for glass (EBCO type) completeas shown in drawing

Removing the unserviceable coaster of Trolley for TV and providing new coasters as per existing size complete all as shown in drawing

CHAIR WRITING CUSHION (FD/E6/MAP/12)

Removing unserviceable seat and providing new seat as per existing size made out 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all around Polyurethane foam shall be 50 mm thick complete all as specified and shown in drawing

Removing unserviceable back and providing new back as per existing size made out 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. Back form shall be designed with contour lumber support for extra comfort with PVC lipping all around as specified and shown in drawing

Removing the unserviceable arm rest of chair writing and providing new arm rest made of black integral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant & both hand rest sections to have slope towards front and as shown in drawing

CHAIR SCHOOL WITH HAND BOARD (TP)

Replacement of hand board of chair school of Make Godrej complete all as specified and shown on drg

Replacement of Seat of chair school Make Godrej all as specified and shown on drg

Preparation surface of frame of chair school with hand board wherever required shall be welded and scrapping cleaning of frame of chair school with hand board broken/damaged & painting with one coat of paint enamel synthetic black in colour all specified and directed by Engineer-in-charge

TABLE BED SIDE MAP(FD/E6/MAR/15(R))

Supply and fix in replacement of unserviceable top of table bed side with new top of 18/19mm thick prelaminated particle board exteriror grade including PVC beading alround all as shown on drg. (Make of pre-laminated particle board:- ECO Board)

All as per Srl. Item No. 6.01 here-in-before but as in sides of table bed side.

All as per Srl. Item No. 6.01 here-in-before but as in front sides of upper drawers of table bed side.

All as per Srl. Item No. 6.01 here-in-before but front sides of lower drawers of table bed side.

Supply and fix in replacement of unserviceable back plywood of table bed side with new plywood of 6mm thick MR Gde all as shown on drg. (Make of plywood:- Archidply/ Greenply/ Kitply)

All as per Srl. Item No. 6.05 here-in-before but as in bottom plywood of drawer of table bed side.

All as per Srl. Item No. 6.05 here-in-before but 12mm thick MR Gde plywood as in all sides plywood of upper drawer of table bed side all as shown on drg and as directed by Engr-in-Charge.

Supply and fix in replacement of frame of legs & stiffeners of table bed side with new 18mm square conduit pipe to be welded with bias electric welding all as specified shown on drg and as directed by Engr-in-Charge.

Supply and fix in replacement of CP handle 75mm long of table bed side with steel screw all as shown on drg and as directed by Engr-in-Charge.

M & L for painting to frame of table bed side with one coat of synthetic enamel black paint including preparation of old steel surface with rubbing with emery paper and providing 04 Nos PVC Shoes at bottom of frame of legs of table bed side all as specified and as directed by Engr-in-Charge.

CHAIR WRITING/VISITOR STEEL (TP)

Supply and fix in replacement of seat of chair Writing/Visitor made of 75mm thick cushioned 32 density covered with new tapestory cloth and rubber bedding complete all as directed by Engr-in-Charge.

All as per Srl item No. 7.01 here-in-before but back of chair Writing/Visitor.

Supply and fix in replacement of arms of chair Writing/Visitor all as directed by Engr-in-Charge.

Supply and fix in replacement of broken steel frame complete of chair Writing/Visitor all as directed by Engineer-in-Charge.

M & L for black painting to frame of Chair Writing / Visitor with synthetic enamel paint of black colour and providing 04 nos rubber shoes to legs all as specified and as directed by Engr-in-Charge.

CHAIR REVOLVING HIGH BACK (TP)

Supply and fix in replacement of seat of chair revolving high back made of 75mm thick cushioned 32 density covered with new tapestory cloth and hard PVC bedding complete all as directed by Engr-in-Charge.

All as per Srl item No. 8.01 here-in-before but back of chair revolving high back.

Supply and fix in replacement of hydraulic system of chair revolving high back complete all as directed by Engr-in-Charge.

Supply and fix in replacement of arms of chair revolving high back all as directed by Engr-in-Charge.

Supply and fix in replacement of pedestal (bottom) consisting of five legs with twin wheel coaster of chair revolving high back complete all as directed by Engineer-in-Charge.

DESK 1220mm (FD-1021)

Supply and fix in replacement of unserviceable box of Desk 1220mm long with new box made out of 18/19mm thick prelaminated particle board exterior grade including 4mm thick teak wood beading alround all as shown on drg and as directed by Engr-in-Charge. (Make of Pre-laminated particle board:- ECO Board or of equivalent make specified here-in-after)

M & L for painting to frame of Desk 1220mm long with as in synthetick enamel black paint including preparation of old steel surface with rubbing with emery paper and providing 04 Nos PVC shoes at bottom of legs of Desk all as specified and directed by Engr-in-Charge.

FOOD TROLLEY STEEL : TP

Dismantling and replacement of unserviceable parts of food Trolley/Waste Food trolley stainless steel and Removing dents from the frames and replacement of broken corner and fixing the new corner bracket with welding. (Welding to be done with SS rod (denting and welding only).

All as per item No 10.01 above but replacement of old unserviceable castor wheel with new castor wheel of required size and of approval quality (as per sample in the yard).

All as per item No 10.01 above but repair of the damaged tray by welding with SS rod at required places, corners and providing new handle of 8mm SS rod of required size

All as per item No 10.01 above but repair of the damaged Waste Food trolley Square Bucket Full welding with SS Rod at six sides of Square Bucket .

All as per item No 10.01 above but fixing of the damaged/Broken Frame by welding with SS rod at required places,

CHAIR AUDITORIUM (TP)

M&L for Removing of old unsv/un tension MS spring, 2 nos in each seat and S&F new MS steel spring of seat fitted in iron bar of seat, as to smooth functioning as is original to chair, with other allied works and re-fixing the same as directed by Engr-In-Charge.

M&L for removing old unserviceable Upholstry of Tapestry cloth of seat & back of chair tip up moulded polythene foam of size 750 mm and S&F new tapestry cloth of high quality to upholstry to chair tip up moulded polythene foam seat and back covering all seat and back along with PVC beadings as in original shown on drgs or as directed by Engr-In- Charge.

BED HARD STEEL, (FD/E6/MAP/08 (R) )

S&F 12mm thick plywood BWR Grade, approved quality in single piece as per drawing without any joint to the bed frame with suitable screws wood/steel with cup washer including removal of damaged ply wood all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to head board of size 635 mm X 200 mm made from 18mm thick pre-laminated particle board exterior grade both side decorative finish shade as approved by GE complete including removal of damaged head board all as specified on drawing or as directed by Engineer-in-charge.

S&F in reapirs to foot board of size 635 mm X 300 mm made from 18mm thick pre-laminated particle board exterior grade both side decorative finish, shade as approved by GE complete including removal of damaged foot board all as specified on drawing or as directed by Engineer-in-charge.

Hard Rubber/PVC toe of superior quality as approved & as directed by Engr-in-charge.

M/s Green Leaf Electricals

Madina Traders

Mahesh Traders

Bidder Name

Madina Traders