Construction of 100 Bedded Boys Hostel in Odisha Adarsha Vidyalaya at Balarampur under Baliapal Block in Balasore District.

CIVIL PORTION WORK:- Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.

Earth work in excavation of foundation in all kinds of soil within 50m. Initial lead and 1.5m initial lift including rough dressing and levelling the bed including all labour, T&P etc. complete as per the Spection and Direction of the Engineer-in-charge.

Earth work in excavated earth from work side for filling and carriage of earth by mechanical means with average lead of 5km including loading and unloading at road alignment including dressing and levelling & approved profile complete as per direction of the Engineer-in-charge

Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-In-charge.

Supplying, filling in foundation & plinth with sand in layers including watering and ramming with cost conveyance, royalities, taxes of all materials and labour with T&P required for the work etc. complete in all respect as per the direction of the Engineer-in-charge.

Providing & applying Post constrution of Antitermite treatment by drilling 12 mm dia holes at a distance of 30cm@ junction of wall and floor about 300mm apart deep enough to each the soil below and chemical emulsion(PREMISE,IMIDACHLOPRIED 30.5SC OF BAYER MAKE mixed with475 ltr water) pumped these holes to soak the soil @1Ltr solution of each holea as per manufactures specification and the holes should be pluged with filling materials including cost of all materials,labour charges,conveyance and all taxes and hiring charges of machinaries as per direction of Engineer in charges

Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size black broken granite stone aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm(6") thick to the required level ramming, watering, curing etc. complete including cost and conveyance royality taxes of all materials and labour with T&P required for the work etc. complete i as per direction of the Engineer-in-charge.

Cement concrete (1:2:4) with 12mm hard granite chips(Crusher broken) black broken granite stone aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers to the required level ramming, watering, curing etc. complete including cost and conveyance royality taxes of all materials and labour with T&P required for the work etc. complete as per direction of the Engineer-in-charge.

Ground Floor

First Floor

Second floor

Terrace floor

Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour,with T&P required for the work etc. complete as per direction of the Engineer-in-charge.

Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Super-Structure including scaffolding, watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour,with T&P required for the work etc. complete as per direction of the Engineer-in-charge.

Ground floor

First floor

Second floor

Terrace floor

Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:4) in Super-Structure including scaffolding, watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour,with T&P required for the work etc. complete as per direction of the Engineer-in-charge.

Ground floor

First floor

Second floor

Providing, lifting, hoisting and laying Reinforoad Comer Concrsis of M-25 grade in Column base, Column Footings, Raft Foundation,Stem of the Columns, beams, chaujja, fin, lintel, stair Case, jali , shelves and slab etc as per approved designs and drawings having a minimum Compressive strength ( in work test) 20N. / Square mm. in 15cm. cubes at 28 days after mixing and test conducted in accordance with 1.S. 456 and 1.S. 516 using screened & washed sharp Hiver sand far mertar and 18mm. to 20 mm. size black hand crusher broken granite stone chips of Spproved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement Including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days including, centering and shuttering then after {dismantfing and removing the debrises away from the work site and finishing the exposed ~ fSurface -smooth. providing grooves-or beads: wherever necessary. including: cost, conveyance, loading, unloading, royalties and taxes of all materials , cost of all labours, scaffolding, sundries,T&P required for the work etc. Complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Stee! and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in. proper position as directed by the Engineer-in-charge.

Foundation

Grade Beam

Column & Beam

Ground floor

First floor

Second floor

Terrace floor

Roof Slab

Ground floor

First floor

Second floor

Terrace floor

Lintel

Ground floor

First floor

Second floor

Terrace floor

Chajja

Ground floor

First floor

Second floor

Terrace floor

Staircase

Ground floor

First floor

Second floor

SupplySupplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-500) (SAIL Only) steel of approved manufacturer as per section 1600 &section 1900 of MORT&H specification for Road and Bridge works ( 4th revision) including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment) ing, fitting and placing un-coated HYSD bar reinforcement complete as per drawing and & technical specification and Direction of the Engineer-in-charge.

Ground floor

First floor

Second floor

Terrace floor

12mm thick Cement plaster (1:4) over brickwork with neat Cement punning for skirting including curing etc. complete as per the Spection and Direction of the Engineer-in-charge.

Ground Floor

12 mm thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.

Ground floor

First floor

Second floor

Terrace floor

16 mm thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.

Ground floor

First floor

Second floor

Terrace floor

6mm thick cement plaster (1:4) over RCC works including deep chipping, finished smooth with proper thickness, watering, curing for required days with cost, conveyance, royality, taxes of all materials and labour with T&P required or the work etc. complete in all respect as per drawing and technical specification and as directed by the Engineer-in-Charge.

Ground floor

First floor

Second floor

Terrace floor

Supplying, fitting & fixing of 8-10 mm thick & size of 600x600 mm vertified floor tile of with veilcraft (VC/FT ) shield( Scratch free/stain free) with water absorption limit between 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib). laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge (for New Work only )

Ground floor

First floor

Second floor

Terrace floor

Supplying, fitting and fixing Vitrified Tile of size 600mm x 600mm (Coloured/Printed Series) of approved make in dado/skirting upto required height from floor level fixed in neat cement slurry after soaking the tiles in water and fixing over an under layer of 12mm thick cement mortar (1:3) , filling joints with white cement mixed with colouring pigments to match the colour and shade including washing and cleaning with Oxalic acid including polishing, cost of all materials, labour, ,, transportation, loading & unloading, royalties, sundries, T&P, watering and curing etc. complete as per the direction of the Engineer-in-Charge.

Ground floor

First floor

Second floor

Terrace floor

Fixing of ceramic wall tiles in dados, skirting riser of stepps 20cmx30cm / 20cmx20cm special plane / printed series of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 on12 mm thick bed of Cement mortar 1:3 ( 1 Cement :3 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete , cost of tiles or stonesfilling joints with white cement mixed with colouring pigments to match the colour and shade including washing and cleaning with Oxalic acid including polishing, cost of all materials, labour, transportation, loading & unloading, royalties, sundries, T&P, watering and curing etc. complete as per the direction of the Engineer-in-Charge.

Ground floor

First floor

Supplying, Fitting &Fixing of Chequerred tiles in floors confirming to IS 13753 on 12 mm thick bed of Cement mortar 1:4 ( 1 Cement :4 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete , cost of tiles or stonesfilling joints with white cement mixed with colouring pigments to match the colour and shade including washing and cleaning with Oxalic acid including polishing, cost of all materials, labour, transportation, loading & unloading, royalties, sundries, T&P, watering and curing etc. complete as per the direction of the Engineer-in-Charge.

Ground floor

Supplying, fitting and fixing Vitrified Tile of size 600mm x 600mm (Plain Ivory) of approved make in dado/skirting upto required height from floor level fixed in neat cement slurry after soaking the tiles in water and fixing over an under layer of 12mm thick cement mortar (1:1) , filling joints with white cement mixed with colouring pigments to match the colour and shade including washing and cleaning with Oxalic acid including polishing, cost of all materials, labour, ,, transportation, loading & unloading, royalties, sundries, T&P, watering and curing etc. complete as per the direction of the Engineer-in-Charge.

Ground floor

First floor

Second floor

Providing & laying granite stone flooring using 10 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm & above in Stair Treads and Risers over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443/1972 including cutting to size, laying and joining with white cement slurry and colouring pigment to match the shade, with polishing and rubbing ,forming and nosing,moulding edge including cost of all labour, materials, , royalties, loading and unloading, conveyance, sundries, watering and curing, etc. complete as per the direction of the Engineer-in-Charge

Ground floor

Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, all labour, T&P etc. complete as per the Spection and Direction of the Engineer-in-charge.

Ground floor

First floor

Second floor

Terrace floor

Providing and applying 2 coats plastic emulsion paint of approved quality and shade over a coat of wall primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats, providing necessary putty & primer including of all materials, labour, conveyance, ,, royalties, scaffolding, watering, curing, sundries, tools and plantsetc. complete as per the Spection and Direction of the Engineer-in-charge.

Ground floor

First floor

Second floor

Terrace floor

Providing and Painting with Two Coats of Acrylic Smooth exterior paint weather seal coat of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of water bound cement primer in all heights with all scaffolding and staging charges including cost, conveyance, , of all materials, cost of all labours, T & P, sundries etc. complete as per the Spection and Direction of the Engineer-in-charge.

Ground floor

First floor

Second floor

Terrace floor

Supplying & fixing G.I Grills made out of G.I Angle, Square bars & flats etc including the cost of materials and labour including grouting of existing column and wall holes etc. complete as per the Spection and Direction of the Engineer-in-charge.

Ground floor

First floor

Second floor

Terrace floor

Dressed seasoned Salwood work framed and fixed (wrought and put up) in trusses, purlines, frames of doors, windows, ventilators and beams etc. complete as per the Spection and Direction of the Engineer-in-charge.

Ground floor

First floor

Second floor

Terrace floor

Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.etc. complete as per the Spection and Direction of the Engineer-in-charge.

Ground floor

First floor

Second floor

Terrace floor

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design including cost of all door fittings and fixtures etc. complete as per the Spection and Direction of the Engineer-in-charge.

Ground floor

First floor

Second floor

Terrace floor

Providing and fixing of Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used of 5 mm reflective with all taxes etc. complete as per the Spection and Direction of the Engineer-in-charge.

Ground floor

First floor

Second floor

Painting two coats of synthetic enamel paint over wood/ iron Works as per approved shade of approved quality over a coat of primer, sand papering, polishing the surface including cost, conveyance, ,, materials, labour, T&P, scaffolding etc. as required for the work complete as per direction of Engineer-in-charge. (The paints and primer are to be approved before procurement and use)

Ground floor

First floor

Second floor

Terrace floor

Providing and fixing Stainless Steel (Grade 304) railing made of hollow tubes, channels, plates, etc. including welding, grinding, buffing, polishing, curvaturing and fixing the same with necessary stainless steel nuts & bolts including fixing the railing with necessary accessories and stainless steel dash fasteners, etc. complete in all floors as per the direction of Engineer-in-charge. (Payment will be made on the weight of stainless steel members excluding the accessories such as nuts, bolts, fasteners, etc.)

Ground floor

First floor

Second floor

Terrace floor

Providing average 20mm thick grading Plaster in C.M ( 1:4 ) over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface and finishing smooth to proper slope and gradient including cost of all materials, conveyance, , and sundries,T&P watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge.

First floor

Second floor

Terrace floor

GPH PORTION OF THE WORK:- Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge (Ashirbad/Supreme/Oripalst/Shaakay) GF Floor -20mm dia C-PVC pipe

25mm dia C-PVC pipe

1st Floor- 20mm dia C-PVC pipe

25mm dia C-PVC pipe

2nd Floor- 20mm dia C-PVC pipe

25mm dia C-PVC pipe

Supplying all materials, labour,T&Pand providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/04 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge(Supreme/Ashirvad/Oriplast/Shaakya) Ground Floor 25mm UPVC ASTM Pipe

32mm UPVC ASTM Pipe

40mm UPVC ASTM Pipe

1st Floor 25mm UPVC ASTM Pipe

32mm UPVC ASTM Pipe

40mm UPVC ASTM Pipe

2nd Floor 25mm UPVC ASTM Pipe

32mm UPVC ASTM Pipe

40mm UPVC ASTM Pipe

50mm UPVC ASTM Pipe

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar ( 1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. G. Floor

1st Floor

2nd Floor

Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. G. Floor

1st Floor

2nd Floor

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per the direction of the Engineer in charge G. Floor

1st Floor

2nd Floor

Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge 250mm to 375mm thick wall G. Floor

1st Floor

2nd Floor

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.

15mm dia CP LB Bib Cock (Plaza/Aquatic/Amber/Cera/Kerovit/Hydro/Somany)

15mm dia CP S.B Bib cock (Plaza/Aquatic/Amber/Cera/Kerovit/Hydro/Somany)

20mm dia CP concealed stop cock (Plaza/Aquatic/Amber/Cera/Kerovit/Hydro/Somany)

15mm dia CP revolving shower with arm (Plaza/Aquatic/Amber/Cera/Kerovit/Hydro/Somany)

15mm dia CP angle stop cock (Plaza/Aquatic/Amber/Cera/Kerovit/Hydro/Somany)

15mm dia CP SINK cock (Plaza/Aquatic/Amber/Cera/Kerovit/Hydro/Somany)

15mm dia CP Pillar cock (Plaza/Aquatic/Amber/Cera/Kerovit/Hydro/Somany)

15mm dia CP Hand Shower (Plaza/Aquatic/Amber/Cera/Kerovit/Hydro/Somany)

15mm dia Two way Bib Cock (Plaza/Aquatic/Amber/Cera/Kerovit/Hydro/Somany)

25mm dia C-PVC ball valve (Ashrivad make)

32mm dia C-PVC ball valve (Ashrivad make)

40mm dia C-PVC ball valve (Ashrivad make)

50mm diaC-PVC ball valve (Ashrivad make)

15mm dia CP Flange

15mm dia CP Extention Nipple

125mm CP grating

Acryalic Shelf

25mmx600mm long CP Towel rail

CP Towel ring

CP soap holder

Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. Fixing 2000 Ltr Roto-moulded water storage tank (Syntax Make) 3 layer on the roof of Second floor

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge In (Ashirbad /Oriplas/Oriplast/Shaakya) Ground floor

110mm dia U-PVC SWR pipe

75 mm dia UPVC SWR Pipe

110mm U-PVC door tee

110mm U-PVC Plain tee

110mm U-PVC door bend

110mm U-PVC plain bend

110mm dia U-PVC 'P' trap

110mm dia U-PVC Plain Shoe Bend

110mm dia U-PVC offset with out ear

110mm dia U-PVC cowl

75 mm dia UPVC plain bend (supreme/ashirvad)

76 mm dia UPVC plain Tee (supreme/ashirvad)

PVC clamp suitable for 75 mm to 110mm dia pipe

Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. European water closet with ‘S’ trap plain with seat cover(Parryware/Hendware/Cera/Somany/Kerovit)

Supplying all materials , labour, T&P and fixing Vitreous china water closet ,squatting pan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal size including fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing 100mm dia hci 'P' or 'S' trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge. 580mmx440mm size Orissa pan ((Parryware/Hendware/Cera/Somany/Kerovit)

Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge. 10 litres capacity pvc low level cistern with 32mm dia CP long flush bend Slimline white (Parryware/Hendware/Cera/Somany/Kerovit)

Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge Under Counter Basin (560x455) (H)10095 white

550mmx440 mm size wash hand basin With porcelain pedestal (Parryware/Hindware/Cera/Somany/Kerovit)

Supplying all materials ,labour ,T&P and fixing wash kitchen sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste , fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc. including cutting holes in walls and making good the damages etc.all complete as per specification and direction of Engineer-in-charge

600x450x250 mm stainless steel kitchen sink-glossy-IS:13983 - 1994 (Jayna make)

Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge Design mirror(Parryware)

BIG Size Mirror 7x3.00x0.60

Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV (Eureka Forbes)of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C.

Ground Floor;-

FIrst Floor

Second Floor

Supplying all materials.labour.T&P and providing brick work with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar(1:4) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.

In Ground floor(S.S)

C.Basin Wall = 8 x 0.6x0.125x0.90

FF=C.Basin Wall = 6x0.6x 0.125x0.90

SF=C.Basin Wall = 6x0.6x 0.125x0.90

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

In Ground floor

In 1st floor

In 2nd floor

Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.

In GF,C. basin slab 3x3.00x0.6x0.10

IN FF ,C. basin slab 2x3.00x0.6x0.10

IN SF ,C. basin slab 2x3.00x0.6x0.10

Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. 0.80 qntl/ cum

Supplying the waterproofing material Pidifin 2K of Dr.fixit on equivalent water proofing material and appling in two coat over the concrete floor and dado upto 1"-6" in wall including cleaning,applying and mending as per specification including all labour charges as per direction of Engineer-in-charge.

In , First floor

Second Floor

Supplying all materials, labour, T&P and fixing Granite tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge In Ground floor

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge .

Ground Floor;-

FIrst Floor

Second Floor

Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. Kajaria / Somany / Johnson to be pre-approved 300 x 300mm of size In Ground Floor

FIrst Floor

Second Floor

Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. Kajaria / Somany 30cm x 45 cm size of

Ground Floor;-

FIrst Floor

Second Floor

Supplying all materials. labour, T&P and fixing pvc shutter with frame of best quality having laminated finish including supply of all door fixtures etc all complete as per specification and direction of the Engineer 1n charge a.PVC door with frame

Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge

Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.

Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge. Inside size 250mmx250mm

Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx460mm

R.C.P.C Cover

Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 910mmx910mmx910mm

Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. 1.40m dia x 2.00m deep soakway pit

Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.

110mm dia U-PVC Alround Concrete

160mm dia U-PVC Alround Concrete

Construction 1 nos 100 users RCC Septic tank

Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.

1x9.90mx4.00x1.50m=

- do - with addl. Depth of 1.5 m

1x9.90mx4.00x0.30m=

Excavation of foundation in laterite rock or any hard rock (other than granite or disintegrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.50 mtr. in depth and depositing the soil within initial lead of 50 mtr. and as per specification approved by the Department.

Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge

In ground floor 1x9.90mx4x0.15m=

Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.

In ground floor 1x9.90mx4x0.15m=

Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge

In ground floor 1x8.90mx3x0.13m=

Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

For Roof slab

For RCC wall

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

In ground floor

Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.

Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge

Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge.

Dewatering with 5 H.P diesel engine pump during excavation

Supplying all materials, labour, T&P and providing, fitting and fixing U-PVC SWR Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge 110mm U-PVC plain Tee

Supplying all materials, labour, T&P and constructing vent base as per P.H.D specification etc all complete.

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge.

110mm diameter U-PVC SWR pipes(Supreme/Ashirvad)

110mm U-PVC cowl

Sinking of 150mm size tube well through hand boring(water jet)method (1 nos.)

Supplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc, levelling of site all complete as per direction of Engineer in charge

Supplying all labour, T&P and transporting the boring pipes, top casing , grouting pipes, P.V.C pipes and fittings, P.V.C well screens, cement, bentonite and gravels etc to the worksite including loading and unloading etc all complete as per direction of Engineer in charge

Supplying all labour, T&P and drilling pilot bore not less than 102mm dia, without casing pipes in all kinds of soils and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets (whenever required) etc and withdrawing the boring pipes, washing and keeping the bore clear for logging if required all complete as per direction of Engineer in charge

Drilling pilot bore from 0 to 360 metres

Supplying all labour, T&P and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction of Engineer in charge

Reaming 100mm to 150mm dia

from 0 to 360 metres

Reaming 150mm to 200mm dia

from 0 to 360 metres

Reaming 200mm to 250mm dia

from 0 to 360 metres

Supplying all labour, T&P and jointing materials and lowering the 300mm dia top casing pipes into the position and removing the same after use all complete as per direction of Engineer in charge

from 0 to 360 metres

Supplying all labour, T&P and jointing materials and lowering the pvc casing pipes, fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore all complete as per direction of Engineer in charge

150 mm dia PVC casing pipe

from 0 to 360 metres

Cost of 150 mm dia PVC ASTM pipe (sch-80)

Cost of 150mm dia PVC slott cutting

Cost of 150mm dia C.I. cutter plug

Cost of bentonite powder

Supplying all materials, labour, T&P and packing the bore with washed gravel of river shingles of required size and specification around the well screen and pipe etc all complete as per the direction of the Engineer in charge

Supplying all materials, labour, T&P and packing the bore with river sand over the gravel pack etc all complete as per the direction of the Engineer in charge

Supplying all labour T&P and grouting with cement slurry for sanitary sealing in the bore around the upper most 3 metres of 125/100mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge.

Cost of Cement

Supplying all labour, T&P and developing the tube well by 8 hours continuous pumping per day for a minimum of 7 cosecutive days or till clear sand free water is obtained as per the direction of the Engineer in charge

Fixing of submerssible pump set

Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge

1.50 H.P single phase (vertcal submersible pump motor) 3 stage head range 20 to 35 metres, discharge 145 to 110 L.M.P with outlet dia of 25mm

DOL Control panel

2.50sqmm flat cable

20mm dia rigid UPVC pipes

Steel rope with cover

Well cap

50mm size CI bracket

32mm dia steel short piece

Labour charges for lowering including transportation

Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge

32mm HDPE pipes

Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V modular type switch ISI marked and modular ceiling rose ISI marked mounted on modular MS box having front modular cover plate of suitable size, modular MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-as approved by PWD Odisha)

Group-A L.P.

Group-B L.P.

Group-C L.P.

Group-A F.P.

Group-B F.P.

Group-C F.P. Ex. F.P

Group-C Call Bell Pt.

S/F of Modular Computer point consisting of 3 no. of 6/16 Amp switch and sockets

S/F of 6 Amp modular switch and socket on existing board

S/F of 6/16 Amp modular switch and socket on separate board

S/F of AC point modular type including 15 Amp socket, starter,32 Amp DP MCB and top as required

Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL etc. as approved by PWD Odisha)

2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia

2 X 2.5 sq.mm +1 X 1.5 sq.mm -do-

2 X 4 sq.mm +1 X 1.5 sq.mm -do-

4X6 sqmm. +2X 2.5 sqmm. In 32 mm dia

Supply and fixing of following way double pole/ triple pole steel MCB distribution board 240/400 V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-(as approved by PWD Odisha)

4 way (4+12) way double door TPN DB

6 way (6+18) way double door TPN DB

4 way DD DB

63 Amp 4P MCB

5amp-32 Amp SP mcb B/C series

S/F of 20 watt LED Tube Light(make- as approved by PWD Odisha)

S/F of 15 watt LED ceiling light(make- as approved by PWD Odisha)

S/F of 25 watt LED ceiling light(make- as approved by PWD Odisha)

S/F of 15 watt LED BH light(make- as approved by PWD Odisha)

S/F of modular phase indicator

S/F of 45 watt LED street light (make- as approved by PWD Odisha)

S/F of ceiling fan 48" (make- as approved by PWD Odisha)

S/F of exhaust fan 300mm (make- as approved by PWD Odisha)

S/F of ceiling fan modular regulator (make- as approved by PWD Odisha)

S/F of modular angle holder (make- as approved by PWD Odisha)

S/F of 9/10 watt LED bulb light(make- as approved by PWD Odisha)

S/F of call bell ( make- as approved by PWD Odisha)

Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made Irom ISI marked seamless cylindci continuing to IS: 7285. fitted with ISI marked controlled valve continuing to IS: 3224. high pressure Imtr discharge hose it horn complete with initial gas charged with carry i ng handle it wall mounting s per direction of Engineer in charge. Make- Safex or equivalent

Supply and Installation of 3 nos of buckets with MS Stand as per direction of enginer incharge.

SITC of Inverter 1 no. 2 KVA inverter with Battery of with 2no. 200 AH( Luminous/ Excide or any reputed make)

SITC of Inverter 1050 VA Luminous with Battery of 160 AH( Luminous/ Excide or any reputed make)

S/F of battery stand

250 Amp Main Panel

SUPPLY AND FIXING OF 1no. of cubicle panel of 2mm thick CRCA panel box of follwing dimensuion:- 1.m x 1 m(30 cm depth)= 1 sqmtr in complete fabrication of metal clad,powder coated,compartmentalised cubicle panel as per CPWD Electrical specification including insulated busbars,supports,interconnections,erection of switchgears and making provisions of incoming/outgoing cables etc.-

S/F of Indicator lamp with toggle switch and fuse. Make- A.E./L&T/C&S or Equivalent

S/F of C.T. Coll upto 400/5amps including all connection.

S/F of 250 Amp DU250 36 KA 4 Pole MCCB with adjustable setting thermal range of 200-250 Amp (L&T/C&S/HPL or equivalent)

S/F of 100 Amp DU100H Type 30 KA 4 Pole MCCB with adjustable setting thermal range of 80-100 Amp. (L&T/C&S/HPL or equivalent)

S/F of 63 Amp MCCB DU type 30 KA 4P with adustable setting thermal range 50-63 Amp (L&T/C&S/HPL or equivalent)

Provision for cable glands,lugs, cable marker etc.

100 Amp Sub Panel 1st and 2nd Floor

SUPPLY AND FIXING OF 2 no. of cubicle panel of 2mm thick CRCA panel box of follwing dimensuion:- 0.8m x 0.8 m(30 cm depth)= 1 sqmtr in complete fabrication of metal clad,powder coated,compartmentalised cubicle panel as per CPWD Electrical specification including insulated busbars,supports,interconnections,erection of switchgears and making provisions of incoming/outgoing cables etc.-

S/F of Indicator lamp with toggle switch and fuse. Make- A.E./L&T/C&S or Equivalent

S/F of C.T. Coll upto 400/5amps including all connection.

S/F of 63 Amp MCCB DU type 30 KA 4P with adustable setting thermal range 50-63 Amp (L&T/C&S/HPL or equivalent)

S/F of 100 Amp DU100H Type 30 KA 4 Pole MCCB with adjustable setting thermal range of 80-100 Amp. (L&T/C&S/HPL or equivalent)

Provision for cable glands,lugs, cable marker etc.

Supply of following Al.PVC Armoured Cable (make-as approved by PWD Odisha)

70 sqmm. 3.5 core cable

35sqmm. 3.5 core cable

Cable laying in ground with protective covering for cable exceeding 120 sqmm. but not exceeding 400 sqmm.

Cable laying on surface exceeding 25 sqmm. but not exceeding 120 sqmm.

Supply and fixing of copper plate earthing 600mm x600 mmx3.15 mm thick ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc including required salt and charcoal as required.

S/L of 25 mm x 5 mm Copper strip on surface or in recess.

Providing and fixing of lightning conductor finial made of 25 mm dia 900 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required

Reveting, sweating and soldering of copper / G.I. tape ( with another copper / G.I. tape, base of the finial or any other metallic object) as required.

Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)

Providing and fixing of G.I. tape 20 mm x 3 mm thick per on parapet or surface of wall for lightning conductor complete as required. (For vertical run)

S/L of 3 mtr. Long 40 mm dia G.I. Standard Earthing with salt and charcoal complete in all respect including cover plate etc.

Providing and fixing of testing joint, made of 20 mm x 3 mm thick G.I. strip, 125 long with 4 nos of G.I. bolts, check nuts and spring washer etc complete as required.

Floor insulating rubber mat 6'x4'x6 mm

Supply of Elegant look 50 WAIO LED Solar Street lights having extruded alluminium housing, 125 Wp or more Mono Crystalline Panel/Laminates fixed on the top of the luminaire housing, maintenance free 12.8 volts 48 Ah or more LiFePO4 battery(BIS certified) , BMS, MPPT charge controller having efficiency> 92% , PIR sensor to provide 2.days (24 hrs ) back up . The luminaire is having IP 65 protection for critical components, IK 07 and having lumen output of > 8250 lumen as LM 79 report of third party NABL lab ,CCT : 6000K(+/-500K), CRI> 70%. Lenses should be provided on the LED chip for better lighting dstribution to avoid glare on human eyes . Both the luminaire and Mono Crystalline Panel must be manufactured in India. The Solar lighting company must submit the third party NABL lab reports to justify the luen efficacy,luminaire output , IK 07 and IP 65 protection ( In house NABL lab reports will not be acceptable). The LED chip shall have average life of L70@ 50000 Burning hours as per LM 80 report.The Luminaire should be supplied along with adjustable type mounting bracket which can be fitted directly on the pole. he Solar lighting manufacturer must submit the declaration letter by mentioning that complete solar light and the solar panel are manufactured in India ( Made in China product are not acceptable) and warranty certificate on their company's letterhead by mentioning warranty period as 5 years and necessary aftersales ervice will be provided through their tollfree base service network located within 100 to 150 KM from the project site. The Solar Street light manufacturer should have own NABL accredieted laborotory. The solar street light must must be submitted for the technical acceptance of the products . 1. EN50530 – MPPT Efficiency , 2.. IEC61547 , 3. IEC61000-3-2 – EMC , 4. IEC 60598 – Part 1 – General requirement ,5. IEC 62109 , 6. LM 79 REPORT (Third party NABL lab only) , 7. IK 07 (Report of Third party NABL lab only for of AIO solar light ) , 8. IP 65 (Report of Third party NABL lab only for any wattage of AIO Solar light) Make: Philips/Anchor by Panasonic/Wipro/Crompton

Supply of 6 mtr long hot dip galvanized Octagonal pole having base dia of 155 mm and top dia of 70 mm and plate thick ness of 4 mm or more having door on the pole to have an access to the JB for connecting AC electric power to the Hybrid solar light . complete with base plate and 4 nos. Jtype En 8 grade foundation bolts to withstand 180 KM / HR wind speed considering the weight & dimension of 1 nos Solar light to be fitted in the pole at two diffrent heights . Make: Bajaj/Utkarsh/BPP/Vakarangi/Utkal Galvanizer

Construction of RCC foundation by using M20 grade RCC and Fe 415 grade reinforcement in the foundation by considering the SBC as 10 T per sq mtr and fixing the 4 nos. fdn bolts in that foundation for installation of pole with Solar light on that foundation. The work shall be excuted as per the direction of EIC.

Installation of 6 mtr pole and fixing the solar light on that foundation by using suitable machinery by taking all safety precautions as per the direction of EIC.

Provision of GI pipe earthing for High mast with 3 M long 40 mm dia GI Pipe including connection to High mast earth terminal with 25 x 3 mm GI flats with all materials and labour. (2nos per mast required)

Supplying and laying 25mm X 5mm G.I strip in ground as required.

Please Enable Macros to View BoQ information