Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹36.5 LAdmitted-Finance | -0.30% | ₹36.5 L | L1 | Admitted-Finance |
| 2 | L2₹36.6 L+₹7,319.62 (0.20%)Admitted-Finance DALALTULI LANE KALITALA P S ENGLISHBAZAR DIST MALDA PAN ADOPG0441N | MALDAH | WEST BENGAL | 732102 | -0.10% | ₹36.6 L+₹7,319.62 (0.20%) | L2 | Admitted-Finance |
| 3 | L3₹36.8 L+₹29,278.48 (0.80%)Admitted-Finance | +0.50% | ₹36.8 L+₹29,278.48 (0.80%) | L3 | Admitted-Finance |
| 4 | L4₹37.0 L+₹47,577.52 (1.30%)Admitted-Finance | +1.00% | ₹37.0 L+₹47,577.52 (1.30%) | L4 | Admitted-Finance |
| 5 | L5₹37.5 L+₹1.0 L (2.86%)Admitted-Finance | +2.55% | ₹37.5 L+₹1.0 L (2.86%) | L5 | Admitted-Finance |
Tender Value
₹36.6 L
EMD Value
₹73,196
Closing Date
2 Sept 2026, 4:00 pmClosed
Executive Engineer, PWD, Jhargram Division
RAGHUNATHPUR, JHARGRAM, PANCHMATHAR MORE, 721507
Replacement of expansion joint on Jhargram ROB from chainge 14.983 Km to 15.500 Km of Lodhasuli Daijhuri Kupannad Road in the district of Jhargram.
2026_WBPWD_5017535_1
EE/JGM.DIVN/2026-27/NIT-02
Open Tender
CIVIL WORKS
Percentage
120 days
Jhargram
Please refer Tender documents.
4 documents required · 4 mandatory
₹73,196
Yes
21 Sept 2026
28 Jul 2026
7 Sept 2026
29 Jul 2026
2 Sept 2026
29 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Replacement of Expansion Joints complete as per drawings | - | Mtr. | 3,173.03 | - |
| 2 | Strip Seal Expansion Joint
Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 80 mm manufactured by MORT&H ,GOI Approved/Empanelled manufacturer and complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation Complete as per MORT&H's specification 2606. | - | Mtr. | 10,673.38 | - |
| 3 | Supplying, binding, fixing etc. including initial straightening, cutting to requisite length, hooking and bending to correct shape, placing in proper postion of uncoated HYSD reinforcement bar in super-structure complete as per drawing and technical specifications Complete as per MORT&H's specification 1600. | - | M.T. | 84,324.74 | - |
| 4 | Painting Two Coats on New Concrete Surfaces
Painting two coats, after filling the surface & applying a sealing primer, with synthetic enamel paint in all shades on new plastered concrete surfaces as per MORT7H's specification 803.6.2. Complete as per MORT&H's specification 803. | 2,435.5 | Sqm | 84.35 | ₹2,05,434.43 |
| 5 | Painting on Steel Surfaces :-
Providing and applying two coats of ready mix paint of approved brand on steel surface after through cleaning of surface to give an even shade Complete as per MORT&H's specification 803. | - | Sqm | 75.25 | - |
| 6 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface.
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes Complete as per MORT&H's specification 803 | 180.95 | Sqm | 736.02 | ₹1,33,182.82 |
| 7 | Supplying & fixing of Raised Pavement Markers/Road Studs/Cats Eye made of polycarbonate moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face which shall support a load of 13635 kg tested in accordance to ASTM D 4280 Type H and compling to Specifications of Category A of MoR&TH Circular No. RW/NH/33023/10-97 - DO III Dt. 11.06.1997 & MoRT&H's specification for Road &Bridge Works (Fifth Rev.). Marker height shall not be less than 10 mm and shall not exceed 20 mm, width shall not exceed 130mm and with minimum reflective area of 13 sqcm on each side and slope to the base shall be 35 ± 5 degree. Fixing will be without nails but by using epoxy resin based adhesive as per manufacturer's recommendation including site clearence etc and complete as directed by the Engineer in Charge.
The contractor will have to provide a test certificate from a reputable national/international laboratory comforming the above specifications. | - | Nos. | 259.97 | - |
| 8 | Total Amount Rs.3101533.00 including @1% cess with Add GST @ 18% on Rs.3101533.00 i.e. total amount over item 1 to 7 | - | P% | 18 | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.21 MB
2911.pdf
Tender Documents • 0.29 MB
BOQ_5087802.xls
BOQ • 0.38 MB
Corri.pdf
PDF • 0.95 MB
Corri.pdf
PDF • 0.99 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .