REPAIR/ MAINT OF OVER HEAD LINES, UNDER GROUND CABLES, STREET LIGHTS, MCCBS AND OTHER CONNECTED WORKS AT MIL STN KALKA UNDER GE JUTOGH

Amount

Excavation in trenches in soft/loose soil n.exc 1.5 Mtr deep and n.exc 1.5 mtr wide for laying of cable and getting out including dressing/trimming of sides and leveling, grading and ramming of bottom of excavation complete all as specified and directed.

Returning, filling, including leveling , watering and well ramming excavated soil in layers n.exc 25cm thick in trenches after cable have been laid complete all as specified and directed.

Removing of excavated surplus soil obtained from excavation to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr of the starting point complete all as specified and directed.

M&L for PCC 1:3:6, type C-2, using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete, complete all as specified and directed.

Taking down/out unserviceable UG cables of any cross sectional area and connections including disconnection and connected items etc complete all as specefied and directed.

Supply & Fixing or Passing through pipe, XLPE insulated, Armoured, Electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade, nominal cross sectional area 10 sqmm 2 core including Brass compression cable gland, terminal lug etc and testing complete all as specefied and directed.

Supply & Fixing or Passing through pipe, XLPE insulated, Armoured, Electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade, nominal cross sectional area 25 sqmm 4 core including Brass compression cable gland, terminal lug etc and testing complete all as specefied and directed.

Supply & Fixing or Passing through pipe, XLPE insulated, Armoured, Electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade, nominal cross sectional area 95 sqmm 3.5 core including Brass compression cable gland, terminal lug etc and testing complete all as specefied and directed.

Supply & Fixing or Passing through pipe, XLPE insulated, Armoured, Electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade, nominal cross sectional area 120 sqmm 3.5 core including Brass compression cable gland, terminal lug etc and testing complete all as specefied and directed.

M&L in repair for GI pipe light grade of size 80mm dia laying in trenches/ under floor/on walls for protection of UG cables complete all as specified and directed

M&L in repair for GI pipe light grade of size 50mm dia laying in trenches/ under floor/on walls for protection of UG cables complete all as specified and directed

M&L for Duct pipe double wall , corrugated HDPE 50mm outer dia , conforming to IS:14930 (Part- II) of approved colour with fittings for cable protection complete all as specified and directed.

M&L for Duct pipe double wall , corrugated HDPE 80mm outer dia , conforming to IS:14930 (Part- II) of approved colour with fittings for cable protection complete all as specified and directed.

S&F in repair MCCB thermal & magnetic setting 4 pole, 415 V, 100 amps, 16kA braking capacity complete all as specified and directed.

S&F in repair MCCB thermal & magnetic setting 4 pole, 415V, 160 amps, 25kA braking capacity complete all as specified and directed.

S&F in repair MCCB thermal & magnetic setting 4 pole, 415V, 200 amps, 25kA braking capacity complete all as specified and directed.

S&F in repair MCCB thermal & magnetic setting 4 pole,415V, 250 amps, 36kA braking capacity complete all as specified and directed.

S & F in repair Digital Amper Meter three digit suitable for three phase complete all as specified and directed.

S & F in repair Digital Voltage Meter three digit suitable for three phase complete all as specified and directed.

M&L for surface cleaning of LT Steel tubular poles of 09 Mtrs long including removing rusted particles and painting with one coats of synthetic enamel aluminium paint over a coat of red oxide including cross arms, bracing, supports, clamps, eye hooks etc and providing black & white strips alternatively 30cm each from coping upto 1.5 mtr height starting with black strip using synthetic enamel paints complete all as specified and directed.

S&F in repair energy efficeint LED Street Light Luminaries 60 watt fitting made of pressure die cast aluminium housing suitable for heat sink design to ensure fast heat dissipation in built driver, Degree of protection IP 66 protection, CCT 5700K (+/- 300 K) with operating voltage range 90V to 300 V including suitable size of wire from fittings to OH line/ pole box as per site requirement complete all as specified and directed. Make: Polycab cat part No PCGLS T1 60 N / Havells cat part No ENDURA PEARL PLUS SL60WLED 757SASY TOPC / Bajaj Cat part No BRTFG 60W LED V3 / Crompton cat part No LSTP-60-CDL

S&F in repair LED Flood light 120W decorative type , IP-66 having powder coated PDC Aluminium body with toughned glass visor fitted inbuilt LED driver, 5700K, efficacy min 100 lumens/watt duly electrical connection with suitable size of wire from fittings to pole box/ OH line as per site requirement complete all as specifed and directed. Make:-CROMPTON Cat no- LFLN-120-CDL/60, Polycab Cat ref PCGLF T1 01 120 57, Bajaj Cat ref BJFL 120W LED I, Havells Cat ref JETAIRISFLS 120W LED 757 PSYMLTG

S&F in replacement KIOSK box weather proof made out of PVC including made out of one piece mounted SMC base and door pole mounted hinged door size 333 x 233 x 200mm out side and 300 x 200 x 105mm inside dimension comprising of aluminum bus bar 4 strips for 3 phase and neutral 63 Amp and 10 Amp MCB for controlling the street light fitting including FI clamps 30 x 4 mm with necessary MS nuts bolts and washer including embossing/painting of Danger notice of size not less than 10 cm x 7.5 cm with letters, figures and conventional skull and bones in signal red colour on front face of KIOSK box body complete all as directed. Make : Sintex cat pat no GS JB 3020 or equivalent in FINOLEX/UNIVERSAL Switch gear/ Hensal/

S & F in replacement street light bracket fabricated out of GI tubing light grade 40 mm bore bend to the shape as directed and not less then length 1.20 mtr complete with MS clamp of flat iron of suitable size 02 Nos incl nut bolts etc of complete all as specified and directed.

Supplying, fabricating, installing, testing and commissioning of outdoor type LT feeder pillar box of suitable size, factory fabricated, cubical panel, mounted on angle iron frame of size 50x50x6 mm, double door, dust and vermin proof made out of 3.15 mm thick CRCA sheet mounting with necessary PCC (1:3:6) for fixing the panel, with front and back opening and locking arrangement, finishing with two coats of powder coated paint of approved shade over one coat of red oxide zinc chrome primer incl copper bus bar of rating 600Amp for three phases and one neutral, duly covered with PVC colour coded sleeves, mounted on porcelain insulators, 4 wire, 415 Volts, 50 Hz, AC supply incl suitable size of copper cable for control wiring, necessary cable glands, lugs etc, proper arrangement for ventilation with ventilation fan with and providing incl taking out old u/s panel any type with the following accessories:

MAIN INCOMMER

MCCB 4 pole, 400 Amps 50 KA Adjustable type-01 No

LED Indicating lamp on incoming

OUT GOING :-

MCCB 4 pole, 200 Amps 25 KA adjustable type -01 No

MCCB 4 pole, 160 Amps 25 KA adjustable type -02 Nos

MCCB 4 pole, 100 Amps 16 KA adjustable type -02 Nos

MCB,TPN, 63 Amps 10 KA type - 01 Nos.

LED Indicating lamp on each out going feeder

Supply, fixing, testing & commissioning Automatic Power Factor Correction (APFC) panel made out of sheet steel of 2mm thick indoor type floor/ wall mounted protection against corrosion by a phosphating treatment structure powder painted, external protection degree-IP 42 for 3 phase, 415 V & 50 Hz system of Standard APFC with a combination of Heavy Duty Capacitors and MCCB of Panel Rating 60 KVAr in 6 steps (2 x 15 + 2x10 + 2x5 KVAr) with contactor switching device, MPPH Capacitor, DU MCCB as Branch Protection, dsine MCCB as Main Incommer, complete all as specified and directed by the Engr-in-charge with following accessories:-

(a) Wiring - Flame retardant cables, Aux, circuits are identified as in the electrical drawing. (b) Fuses - All capacitors is protected by a set of three fuses with high breaking capacity and the auxiliary circuits are protected by fuses. (c) Rated Voltage - 415 Vac. (d) Frequency - 50 Hz. (e) Auxiliary voltage - 230 Vac. (f) Mains voltage - 415 Vac three phase. (g) Contactors - Each bank of capacitors is controlled by three pole contactor. To limit the inrush current peaks, each contactor is provided with insertion resistors. (h) Capacitors - Self-healing Metallized Polypropylene equipped with overpressure safety device and discharge resistor. Filling : biodegradable non toxic dry type, PCB free. Capacitance tolerance : -5% to + 10%, Dielectric losses : <0.2W/kvar. (j) Protection degree - External protection rating : IP 42 (k) Power supply - Provision for top and bottom cable entry (l) Cooling - Exhaust fans (m) Temperature class - -10 0C to +50 0C (n) Power factor controller - Friendly user intelligent Microprocessor based APFC Relay (o) Reference Standards - IEC - 61921/IS 8623 (p) Duty - To continuously sense and monitor the load conditions by the use of the external CT (whose output is fed to the control relay) and automatically switch ON and switch OFF relevant capacitor steps to ensure consistent power factor and display of real time power factor, number of switching operations carried out etc. complete all as specified and directed.

M&L for earthing complete with galvanized steel plate earth electrode 60cmx60cmx6mm thick surrounded by char coal and salt buried directly in ground vertically in pit of depth not less then 2.25 mtr below ground level with top edge of the earth plate at depth of not less then 1.5 mtr below ground level surrounded from all sides by char coal dust and common salt in alternate layers of 15 cm depth and earth plate electrode connected to galvanised earth means of GI Strip 25X4 mm at two points by means of GI nuts bolts, check nuts and washers and connected to earthling test point drawn through GI pipe for protection of earth lead wire incl PCC earth pit (1:3:6) type C-2 with CI frame and RCC cover all as shown in electrical Plate No 3 on SSR Part-I including testing and dismantling ,taking down old unser earthing complete all as specified and directed. Note: (i) Rate of Earth work, Earthing electrode, all connections, nut-bolts, washers, complete labour, testing, Earth lead upto 7.5 mtr, char coal dust, common salt, porcelain insulator, PCC earth Pit, CI frame ,RCC cover, funnel with wire mesh are incl in quoted rate and watering pipe, earth lead protection pipe, test poit, earth lead up to 7.5 mtr .

M/S Sonu Traders

R D Bansal

The Rahul Vig

KATWAL TECHNOCRATS

PRITPAL SINGH

m/s jupiter builders