REPAIR AND REPLACEMENT OF OLD CONVENTIONAL LIGHT FITTING INTO SMART LED LIGHT FITTING AND MISC REPAIRS TO GARDEN LIGHTS BOLLARD LIGHTS POST TOP LANTERN AND COOLING APPLIANCES AT VARIOUS LOCATION OF DGQA AREA AND REPAIR REPLACEMENT AND MAINTENANCE OF

Amount

Taking down old unserviceable Tube light fitting of any type and S & F wall mounted LED tube light fitting extruded aluminium housing high quality indoor batten LED tube 20 watt colour temperature 6500 K (4' long) lumen 2000 -3000, PF> 0.95, THD less 10% diffused connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Make : Jaquar/Halonix/Benlo/Crompton. Note : The rates are inclusive of cost of square box 02 Nos including suitable size of clamps and screws etc.

All as per item No 01 above but of capacity 10 Watt ( 2' long) Make : Jaquar/Halonix/Benlo/Crompton

Taking down old unserviceable Tube light fitting of any type and S & F wall/ceiling mounted Inverter LED tube light fitting 4' feets long with opal diffuser and having aluminium body. Energy efficient high quality invertor batten should have Lithium ion battery of 3.7V, 19 WH having inbuilt battery backup upto 2Hrs with high power brightness having BIS certification, LED fitting should be LM 80 certified with system efficacy greater than 100 lumens/watt, including LED tube 20/22 watt having colour temperature 6500 K , PF> 0.95, THD less 10%, with IP20 protection having open and short circuit protection, having input voltage range 90V to 300V connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Make : Havells/Jaquar/Halonix/Crompton . Note :- The rates are inclusive of cost of square box 02 Nos including suitable size of clamps and screws etc.

Taking down old unserviceable wall bracket light fitting of any type from any height & S & F wall mounted high quality indoor wall bracket light cylinderical/oval shape aesthetically designed fitting in wooden housing, glass and B22/E27 holder complete including inverter LED bulb B-22 cap with opal diffuser, IP-20 and inbuilt battery backup (LED INVERTER LIGHT 10W B22 CW IP) 10/12 watts including necessary electric connection with PVC insulated multistranded copper cable of size 1.5 sqmm 3 core from ceiling rose to fitting terminal complete all as specified and directed. Make :- Hanolex/Benlo/Jaquar/Havells. Note : (i) The rates are includive of light fitting and invertor bulb of cap 10W (ii) The rates are inclusive of civil work(plastering, painting etc) wherever required for fixing the fittings to the walls. (iii) The rates are inclusive of cost of ceiling rose -01 nos and square box-02 nos including suitable size of clamps and screws etc.

Taking down old unserviceable Recess mounting fitting of any type from any height and S & F high quality Recess/Surface mounting slim LED flat panel 1'x1' made of die cast aluminium housing with high efficient LEDs glare free opal diffiuser, with IP 20 protection complete as per site requirement connecting with three core flexible copper wire as directed by Engr-in-charge. Make : Hanolex/Benlo/Jaquar/Havells.

Taking down old unserviceable Recess mounting fitting of any type from any height and S & F high quality Recess/Surface mounting LED Flat panel 36 Watts size 2'x2' made of die cast aluminium housing with high efficient LEDs glare free opal diffiuser, with IP 20 protection complete as per site requirement connecting with three core flexible copper wire as directed by Engr-in-charge. Make : Hanolex/Benlo/Jaquar/Havells.

Taking down old unserviceable Recess mounting fitting of any type from any height and S & F high quality Recess/Surface mounting round LED backlit round down lighter made of pressure die cast aluminium housing with high efficient LED's and glare free opal diffuser 18 watts, with IP 20 protection complete as per site requirement and connecting with three core flexible copper wire as directed by Engr-in-charge. Make : Jaquar/Havells/Halonix/Crompton.

Taking down old unserviceable recess mounting fitting of any type from any height and S & F high quality energy efficient Recess/Surface mounting 2'x2' recessed inverter fitting, CRCA powder coated steel housing with high power brightness having BIS certification, fitting should be LM 80 certified with system efficacy greater than and equal to 100 lumens/watt, having Lithium ion battery of cap 3.7V, 19 WH for backup upto 2 hrs having operating voltage range 90volts to 300volts having colour temperature 5700K, PF> 0.95, THD less 10%, with IP20 protection having open and short circuit protection, connecting with three core flexible copper wire from connector to ceiling rose as per site requirement as directed by Engr-in-charge. Make : Jaquar/Halonix/Havells/Crompton . Note : The rates are inclusive of civil work (minor plastering, painting, false ceiling repair etc) wherever required for fixing the fittings to the roofs/ceilings.

Taking down old unserviceable wall mount downlighter fitting of any type from any height and S & F high quality Energy efficient out door type LED Wall mount up/down lighter fitting of 6/12 watts, aluminium housing with high power brightness having colour temperature not less than 3000K, PF> 0.95, with IP54 protection connecting with three core flexible copper wire from connector to junction box as per site requirement as directed by Engr-in-charge. Make : Polycab/Surya/Wipro/Crompton . Note : The rates are inclusive of civil work (minor plastering, painting, repair to wall etc) wherever required for fixing the fittings to the walls.

Taking down old unserviceable Bldg security light of any type & rating and S&F high energy efficent inverter LED building security light 30 watt with inbuilt battery backup having lens type LED's, 230 V, lumen 2000 -3000, PF> 0.95, THD less 10%, made of pressure/Die cast aluminuim housing with high power LEDs, lens and toughned glass IP 66 protection and connecting with three core flexible copper wire from connector to ceiling rose. Make : Halonix/Jaquar/Havells.

S & F in repair bracket for mounting building security light made out of 40 mm dia Light Grade GI pipe of length of bracket not less than 1.2 mtr, bend in angle with holding MS clamps two nos each bracket of size 25x3 mm including screw/Nut Bolts etc for fixing complete all as specified and directed by Engr- in-charge.

Taking down old unserviceable bulk head fitting of any type and S & F wall mounted inverter LED bulk head fitting 10 watts with IP 66 protection and inbuilt battery backup, having poly carbonate housing, fitting should be LM 80 certified with system efficacy greater than and equal to 100 lumens/watt, having Lithium ion battery of cap 3.7V, 19 WH for backup upto 2 hrs having colour temperature 5700K to 6500K, PF> 0.95, having open and short circuit protection, connecting with three core flexible copper wire from connector to ceiling rose as per site requirement as directed by Engr-in-charge. Make : Jaquar/Halonix/Havells/Wipro

Taking down old Flood Light of any type/capacity from any height and supply and fix LED Flood light fitting of capacity 150 watts made up of pressure die cast aluminium housing with toughned glass and high power LED's and secondary lenses, having system efficacy greated than 110 lumen per watts with surge protection device included. The luminaries shall be totally enclosed dust and water proof with minimum IP -66 protection pre wired up to connector including 2.5 sq mm PVC insulated copper cable for making connection (upto 9 mtr length), complete all as specified and directed by Engr-in-charge. Make :- Halonix/Crompton/Benlo/Havells.

All as per item No 13 above but of capacity 250 Watts Make :- Halonix/Crompton/Benlo/Havells.

All as per item No 13 above but of capacity 500 Watts Make :- Halonix/Crompton/Benlo/Havells.

Taking down old unserviceable bollard light and M & L for LED based bollard light, with aluminium housing with acrylic diffuser of cap 10 W with IP 65/66 protection, bollard length should be 800mm complete with all accessories complete all as specified and directed. Make :- Wipro/Halonex/Crompton/Jaquar Note :- The quoted rates is inclusive of excavation and foundation work of PCC of bollard fittings as recommended by OEM and Engr- in-charge.

TS & F in replacement LED bollard light, with aluminium housing with acrylic diffuser of cap 10/15 W inverted pyramid tripod type LED bollard with soft 360 degree light distribution with IP 65/66 protection, bollard length should be 800mm complete with all accessories and as specified. Make :- Crompton cat no LBLSN-10-CDL or equivalent in Halonex/Wipro/ Surya. Note :- The quoted rates is inclusive of excavation and foundation work of Pcc of bollard fittings as recommended by OEM and Engr- In- Charge.

Taking down old unserviceable Post top lantern (gate light) 25 W with high power brightness LM 80 certified LED, made up of die cast aluminium spigot , spun aluminium powder coated top cover , aluminium PDC heat shrink, opal PC diffuser and clear acrylic diffuser with IP 65 protection and connecting with three core flexible copper wire from connector to ceiling rose Make:- Halonix/Jaquar/Havells/Surya/Crompton.

M&L for sub main wiring in repair but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 2.5 sqmm 1100 volt grade drawn into PVC Conduit/Casing capping of suitable size fixed to wall with suitable size of clamps of suitable size including 2.5 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface complete all as specified and directed by Engr-in-Charge.

All as per item No 17 but of Cable size 4 sqmm 1100 volt grade drawn into PVC Conduit/Casing capping of suitable size fixed to wall with suitable size of clamps complete all as specified and directed by Engr-in-charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS ( Red, black and green for single phase circuits), with multi stranded copper conductor 1.5 Sqmm nominal cross sectional area,single core, PVC insulated and unsheathed FRLS cable1100 volts grade , ISI-694 (1990) marked with valid CML No in and including medium grade, PVC casing & capping of suitable size on walls/roof/floor etc, ISI marked with suitable accessories, mild steel/ pressed steel sunken box of 1.2 mm thick and 60 mm deep ( with earth dolly ) duly painted with two coat of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide externally, covered with 3 mm thick plasticlaminated sheet cover for fixing of switches, sockets and fan regulator etc, including PVC insulated multistranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engr- in-charge for one fan/light controlled by one switch Make: Polycab /Finolex/ RR

M&L for point wiring using approved colour coding as per IS ( Red, black and green for single phase circuits), with multi stranded copper conductor 1.5 Sqmm nominal cross sectional area,single core, PVC insulated and unsheathed FRLS cable1100 volts grade , ISI-694 (1990) marked with valid CML No in and including medium grade, PVC Conduit of suitable size on walls/roof/floor etc, ISI marked with suitable accessories, mild steel/ pressed steel sunken box of 1.2 mm thick and 60 mm deep ( with earth dolly ) duly painted with two coat of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide externally , covered with 3 mm thick plasticlaminated sheet cover for fixing of switches, sockets and fan regulator etc, including PVC insulated multistranded copper conductor 1.5 SQ mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engr- in-charge for One fan/light controlled by one switch Make:- polycab /Finolex/ RR

Supply and fix in repair modular switch 1 way 6A 1 module complete all as specified and directed.

Cooling Appliances Comprehensive maintenance and servicing of Split type Air conditioner / Window type unit of any capacity outer and inner unit both of any make including cleaning the dust from body with blower, cleaning of condenser and cooling coil, checking all connectins including functioning of metal clad socket/DP switch, function of relay, capacitors, overload protector, thermostat, fan motor, fan motor blade/blower drum, main control board PCB, electronic control box, etc, oiling/greasing of fan motor, checking serviceablility, cleaning of the air filter woolen felt & refixing ensuring for air tighting complete, repair and replacement of worn out/unserviceable spares including taking down and refixing, transportation to and from workshop if required and refixing it in its original place after fully servicing including testing and cleaning of area which is made dirty during cleaning & commissioning all as specified and directed by Engr-in-charge. Note: (i) Spare parts replaced shall be measured & paid separately under relevant item of this BOQ. (ii) Supply and charging of Nitrogen /Refrigerant gas will be measured and paid separately under relevant item of this BOQ.

Supply only starting capacitor 80-100 Mfd 440 Volts AC, 50Hz for window /split AC of capacity 1.0 / 1.5 TR for AC complete all as specified and directed of existing make.

Supply only starting capacitor 120 Mfd 440 Volts AC, 50Hz for window /split AC of capacity 2.0 TR for AC complete all as specified and directed of existing make.

Supply only running capacitor 36 Mfd 440 Volts, 50 Hz AC for window / split type AC of capacity 1.5 TR.

Supply only running capacitor 50 Mfd 440 Volts, 50 Hz AC for window / split type AC of capacity 1.5 TR / 2.0 TR

Supply only blower motor capacitor 4 Mfd 440 Volts, 50 Hz AC for window / split type AC of capacity 1.5 TR / 2.0 TR

Supply only blower motor capacitor 6 Mfd 440 Volts, 50 Hz AC

Supply only running capacitor 25 Mfd 440 Volts, 50 Hz AC for water cooler.

Supply only for over load relay comprising of over load protection suitable for air conditioner, water cooler, deep freezer and refrigerator operated in single phase 230 volt complete all as specifed and directed.

Supply only thermostat switch suitable for Air conditioner, water cooler, Deep freezer and Refrigerator operator on single phase 230 volts supply complete all as specified and directed.

Supply only drier filter for AC, water and refrigerator.

Supply only magnetic contactor as in outer unit of Split type air conditioner as per existing type complete all as specified and directed.

Supply only capillary tubes for the Air conditioner 1.5 Ton / 2 ton and water cooler 40 to 150 Ltrs

Supply only indoor fan motor of split type AC of any capacity

Supply only condensor fan motor 1300 rpm, 1/6 Hp, 1/8 Hp, 1/10 Hp for split type Air conditioner outdoor unit of 1.0 Ton/1.5 Ton/2.0 Ton as per existing make and capacity complete all as specified and directed by Engineer in charge

Supply only condensor fan motor double shaft 1/4 Hp, 230 Volts AC for Window type AC of 1.0/1.5 Ton/2.0 Ton (indoor unit) as make and capacity complete all as specified and directed by Engineer in charge

Supply only condensor fan motor double shaft 1/5 Hp, 230 Volts AC for Window type AC of 1.0/1.5 Ton/2.0 Ton (indoor unit) as make and capacity complete all as specified and directed by Engr- in-charge

Supply only condensor fan motor double shaft 1/6 Hp, 230 Volts AC for Window type AC of 1.0/1.5 Ton/2.0 Ton (outdoor unit) as make and capacity all as complete specified and directed by Engr- in-charge

Supply only condensor fan motor double shaft 1/8 Hp, 230 Volts AC for Window type AC of 1.0/1.5 Ton/2.0 Ton (outdoor unit) as make and capacity all as complete specified and directed by Engr- in-charge

Supply only condensor fan motor 1/36 Hp for water cooler of 40-80 Ltr and Deep freezer up to 400 Ltr as per existing make and capacity complete all as specified and directed by Engineer in charge

Supply only condensor fan motor 1/6 Hp, 1/8 Hp, 1/10 Hp for water cooler of 120-150 Ltr as per existing make and capacity complete all as specifed and directed by Engr-in-charge

Supply only remote control unit of splity type AC 1.5 Ton / 2.0 Ton including making frequency arrangement of new remote with existing system complete all as specified and directed by Engr-in-charge

Supply only Electronic PCB unit for main control panel of splity type/window type AC of any capacity

Supply only capillary tubes for the refrigerator & deep freezer up to 400 Ltr

Supply only starting relay suitable for water cooler, AC and Refrigerator, Deep freezer for any make and model operated on single phase 230 volts complete all as specified and directed.

Supply only thermostat switch suitable for Air conditioner, water cooler, Deep freezer and Refrigerator operator on single phase 230 volts supply complete all as specified and directed.

Supply only condensor fan motor 1/36 Hp for water cooler of 40-80 Ltr and Deep freezer up to 400 Ltr as per existing make and capacity all as specified and directed by Engineer in charge

Supply only blower/condenser fan blades as per existing make & type for Air conditioner/water cooler/Deep freezer complete all as specifed and directed.

Supply only starting capacitor 10 Mfd 440 Volts, 50 Hz AC for water cooler.

Supply only running capacitor 15 Mfd 440 Volts, 50 Hz AC for water cooler.

Supply only starting capacitor 60 Mfd for water cooler

Supply only starting capacitor 80 Mfd 440 Volts, 50 Hz AC for water cooler.

Repair, replacement and supply, install, test & commissioning harmetically sealed New compressor for the following appliances duly charged with fresh freon gas / R-134 a complete all as specifed and directed by Engr-in-charge including taking down old u/s compressor. Make: Voltas/Shriram/LG/Godrej/Kirloskar or as per existing make at site.

Split type AC of capacity 1.5 TR

Split type AC of capacity 2.0 TR

Window type AC of capacity 1.5 TR

Water cooler of capacity 40 to 80 Ltrs

Water cooler of capacity 120 to 150 Ltrs

Refrigerator 165 to 210 Ltrs

Refrigerator 210 to 310 Ltrs

M & L for detecting the gas leakage with the help of nitrogen gas, rectifying the defects including repair to condensor coil/evaporator coil by means of welding, soldering etc, vacumizing and charging, topping up fresh freon Gas/ R-22 a and commissioning and testing for the 1.5 Ton/2.0 ton split /window type AC complete all as specified and directed by Engr-in-charge

All as per item No 56 above, but of water cooler/ refrigerator/ deep freezer of any capacity for servicing and gas charging .

All as per item No. 56 for complete servicing of Water cooler / DeepFreezer/ refrigerator

Disconnecting electrical /mechanically and lowering to the ground for repairing / over hauling the desert cooler including replacement of canvas grass/ wood wool pads and spray painting to body with one coats of anti corrisive red oxide primer for any make of desert cooler to make it fully functional including replacement of unserviceable / defective spare parts, transportation to and from, re-installation and testing on completion to the entire satisfaction of Engr-in-charge. Note: Spares replaced will be measured and paid separately under respective item of this BOQ as supply only.

Supply only water lifting pump 1/70 HP capcity, operated on single phase 230 volts with all accessories and testing complete to the entire satisfaction of Engr-in-charge.

Supply only fan motor of desert cooler of any capacity including supporting legs, nuts and bolts etc.

supply only fan blade with bush for desert cooler motor

Supply only electronic control circuit board (PCB) as per existing type for desert cooler

Supply only swing motor for air cooler

S & F metal plug tops for 2 pin and earth socket AC box of capacity 240 V, 20 A all as specified and directed.

Supply only PVC Flexible pipe 25 - 30 mm dia as in drain pipe suitable for water cooler outlet including taking down old unserviceable pipe of any size

S & F incl connecting sheet metal encosure with two pin and earth plug and socket complete, with one double pole MCB 20 Amp 240 Volts AC. Make: L & T/Hager/Schnedier

S & F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule for 15mm bore dia

S & F in push tap self closing taps of size 15 mm of cast iron or malleable cast iron, galvanised, screwed for iron pipe or for water cooler

Supply and fix PVC connecting pipe with brass nuts and washers at both ends of length not exceeding 60 cms for connection of water coolers with taking down old pipe

M & L for repair/ replacement to stainless steel waste water tray including welding, polishing, riveting, provision of fixing screws and refixing

M & L for Gaskets for top cover for water cooler of any capacity and make as per site requirement

Taking out unserviceable cooling coil of 165/285 Ltrs Refrigerator and S & F cooling coil as per existing make and size complete all as specified and directred by Engr-in-Charge.

S&F in repairs damage condenser coil for refrigerator of capacity 210/300 Ltrs

S&F in repairs door switch for refrigerator of any type and any capacity

S&F in repairs pigmy lamp (indoor lamp) as per existing type for refrigerator

S&F in repairs freezer door as per existing make and type for refrigerator

S&F in repairs timer switch assembly for refrigerator as per existing for capacity 210 to 310 Ltrs

Supply only copper tubing 5/8" for 1.0/1.5/2.0 TR split AC with proper insulation of suitable size and taking out old one as directed by Engr-in-Charge.

Supply only copper tubing 1/4" for 1.0/1.5/2.0 TR split AC with proper insulation of suitable size and taking out old one as directed by Engr-in-Charge.

Excavation in trenches Soft /loose soil not exceeding 1.5 m in wide and not exceeding 1.5 m in depth and getting out in complete all as specified

Returning /refilling including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soil.

Removing excavated material to a distance and deposting wehere directed at a level not exc 1.5 meter above the starting point in soil

Taking down GI tubing and connections complete all as specified & directed with following sizes

a) 15 mm dia.

b) 20 mm dia.

c) 25 mm dia

d) 40mm dia.

e) 50 mm dia

Supply and laying for galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed of following sizes :-.

a) 15 mm dia.

b) 20 mm dia

b) 25 mm dia

c) 40mm dia.

d) 50 mm dia

Supply and fix gun metal, globe or gate valve heavy duty confirming to IS-778 with iron wheel head, screwed both ends for iron pipes for the following size of bore including dismantling the unserviceable valve, complete all as specified and dircted.

a) 15 mm dia.

b) 20 mm dia.

c) 25 mm dia

d) 40mm dia.

e) 50 mm dia

Material and Labour for mechanical joint consisting of compression collars made out of Cast Iron, MS Flanges drilled as per IS for pressure rating PN1.6, including MS nuts, bolts, rubber gasket,cleaning the pipe surface,chamfering or cutting the edges of pipes for positioning, jointing and testing for the following size and of pipe material GI/CI/MS/AC complete all as specified and directed by Engr-in-charge. Note : cost for excavation & earthwork will be measured and paid seperately

(a) 150 mm dia

(b) 100 mm dia

(c) 80 mm dia

M&L in repairs for CI/DI fittings for spigot socketed pipes such as boards (any type radius and angle) tapper any type (straight,bend,increasing-decreasing or double socket etc ) Tee pieces one end flanged other end tapering up to 150 mm bore. Note: The rate quoted by the tenderer incl cost of earthwork complete

Supply and fixing CI Sluice valve class PN 1.6 flanged drill holes any pattern high pressure full way with iron wheel at the top heavy duty brass spindle, non rising type, suitable for following sizes, flanged end including two nos of flanged ends including 2 flanged joints and jointing material i.e. nuts, bolts, washers, rubber gaskets etc., including dismatling the unserviceable valve complete for the following dia/bore complete all as specified and directed.

a) 200 mm dia.

b) 150 mm dia.

c) 100 mm dia.

d) 80 mm dia.

Supply only MCCB 3 pole 415 V, 63 Amps, with breaking capacity 25 KA ,Ics=100% Icu complete all as specified and directed by Engr-in-charge.

Supply only MCCB 3 pole 415 V, Fixed type 100 Amps, with breaking capacity 25 KA ,Ics=100% Icu complete all as specified and directed by Engr-in-charge.

Supply only MCCB 4 pole 415 V, Fixed type 160 Amps, with breaking capacity 25 KA ,Ics=100% Icu complete all as specified and directed by Engr-in-charge.

Supply and fix single phase preventer relay on exisiting panel including necessary connection to panel complete all as specified and directed by Engr-in-Charge.

Disconnecting existing tanks of capacity 500/1000 Ltr setting aside (or lowering if required) water tank, dewatering, cleaning and removeing all dirt, scale and algae formation from inside the tank by using cleaning chemicals including paste stickers mentioning "TANK CLEANED ON " with date, month, & year. The stages of cleaning prosess of tanks are as follows :- (a) To drain out the water by using exist valve or high capacity dewatering system. (b) Cleaning all the algae formation inside the tank by using high-strength calcium hypochlorite (HSCH) chemicals and scrubbing the walls & base of the tank by scrubber. (c) Fresh water cleaning with high speed jet pump. (d) Drying the tank then first stage of bacteria screening and sterlization of the tank by using high-strength calcium hypochlorite (HSCH) chemical. (e) Cleaning the floor of the water tank by heavy duty industrial vaccum clearner. (f) Second stage of bacteria screening and starilization of the tank by using ultra violet ray ejector covering 360 degree within the tank and killing all suspended bactaria (g) Third stage of bacteria screening and sterilization of the tank floor by usinghigh-strength calcium hypochlorite (HSCH) chemical. Note - (i) The quoted rate shall include for removal of mud, grits and deposits etc properly from site of work and on completion of work sterlisation certificate to submitted to the Engr-in-charge. (ii) Cleaning needs to be done mechanically by authorised dealer/agent as approved by Engr-in-charge. (iii) Cleaning chemical shall also be approved by Engr-in-charge.

All as per item No 95 here-in-before but of capacity 1001-5000 ltrs

Supply and Fix in repair PVC tank cover suitable for 500 ltrs/1000 ltrs capacity complete with fixing accessories

All as per Item No 95 but for RCC Overhead tank of height 20 meter from GL of 0.50 LG capacity (Location: CQA (EE) Residential Area)

All as per item No 95 above but Capacity of tanks 0.20 Lakh Gallons.(Location: CQA (FFE ) Tech Area) & CQA (ME) Tech Area complete all as specified.

All as per item No 95 above but for semi under gound sump of Capacity 1.5 Lakhs Gallons (Location: CQA (EE) main pump house) complete all as specified.

All as per item No 95 above but semi under gound sump of Capacity 0.50 Lakh Gallons. (Location: CQA (EE) Main pump house,CQA (ME) pump house)

Dismantling the pump set of capacity 20HP, fixed in foundation, transporting to work shop by opening the pump, over hauling the shafts by machining/ filling as required, replacement of unserviceable bearing and bushes, gaskets, , & greasing of pump and reassembling complete including coupling with motor and testing at site on full load all as specified and directed by Engineer-in- charge. Note : Bearings will be measured and paid separately.

All as per item No 102 above but 10 HP pump set.

All as per item No 102 above but Fire fighting Pump Set of 20 HP.

All as per item No 102 above but 5 to 7.5 HP Pump set.

Dismantling and taking down motor from pump set of 20 HP pump set fixed in foundation and transporting the same to work shop, opening the motor, removing burnt winding and cleaning of stator slots and rewinding of motor using copper winding wire of existing guage and number of turns to achieve rated speed on rated voltage and current including suitable gauge / size super enamelled winding wire, replacing paper insulating of class F and fire proof sleeves, varnishing complete including ovening, oiling, greasing, replacing wornout rear/ front bearings and reassembling complete motor, including testing at site on full load all as directed by Engr- in -charge. Note : Bearings will be measured & paid separately.

All as per item No 106 above but 10 HP motor

All as per item No 106 above but 7.5 Hp motor

Supply only bearing DE/NDE 20 HP pumpset of bearing as per existing sample all as specified and directed by Engr- in -charge. Make : SKF

Supply only motor bearing for 5 to 20 HP motor for bearing suitable as per existing sample all as specified and directed by Engr- in -charge.

S& F in replacement love joy coupling type KL 150with spacer for 20HP

S& F in replacement love joy coupling suitable for 5 to 10HP

M & L for painting of pump, motor complet set of capacity 5 HP to 20 HP with two coats of synthetic enamel paint after preparing surfaces and writing MES / SM Nos complete all as specified and directed by Engr- in -charge.

M & L for painting of CI / DI / GI pipelines of any sizes in various MES Pump huse located in CQA Area complete with two coat of synthetic enamel paint after preparing surfaces and writing of Inlet/ Out let direction, Area of Feeding etc complete all as specified and directed by Engr- in -charge.

Supply and fix in repairs water pressure gauge of capacity 10 Kg/mm2 gauges dial type complete all as specified and directed by Engr- in -charge. Make: Hguru oren

S & F in repair tyre coupling of size A-18 with existing alignment all as specified and directed

S & F in repair any type and any size gland required as per exisitng at site as specified and directed by Engr - in - charge

Taking down unserviceable rubber gasket joint supply and fix rubber gasket joint (push on / tyton joint) for spigot & socketed pipes complete all as specified and directed for the following sizes:-

M & L for attending the emergent repairs to leakage/ damage GI pipe of size 15 mm dia to 20 mm dia including carrying out minor repairs etc as required to Make- the system in order / functional and necessary excavation ,returning , filling of soils and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified and as directed by Engr-in-charge.

(a) up to 25 mm dia

(b) 40 mm to 50 mm dia

(c) 80 mm to 200 mm dia

S&F in repair Ball brass valve, high pressure with polythene float and fly nut complete ISI marked of following sizes, complete all as specified and dircted by Engr-in-charge.

(a) 25 mm bore

(b) 20 mm bore

M&L for complete removal of existing treatment old surfaces of walls including brooming down or scraping down with steel wire brushes & preparing the surfaces and applying two coats of finishing walls with Premium Acrylic Smooth exterior emulsion paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)® upto OHT 24 METER complete all as specified and directed. Make: Asian/Berger Nerolac or equivalent Note : Rate quoted by the contractor deemed to be include. Safety precautions like rope, safety belts, scaffolding helmets , ladder etc & shall be responsibility of contractor.

M&L for cleaning of MES water supply installations/campus by surface dressing or trimming of natural ground to remove small unequalities (including removing vegetation/ shrubs/brush wood/under growth) and carrying away the rubbish to a distance of not exc 50 mtr away complete for the various water supply/firefighting installation. Note: Contractor need to clean pump house area once in a month up to the validity of contract.

AMAN ENGINEERING AND ELECTIRICALS WORKS (BID ID -3127249)

SKS Electricals (BID ID -3126093)

Chaulya Enterprises (BID ID -3125980)

Bidder Name

Chaulya Enterprises