PROVN OF PAVER BLOCK FROM ASAL UTTAR GATE TO JARPAL GATE AT GRC, PROVN OF SEPTIC TANK AT BLDG NO P-29, P-205 AT RECORDS JAK RIF AND PROVN OF ELECTRIC CONNECTION 600M LONG AROUND SPECTATOR GALLERY AT CENTRE PARADE GROUND OF GRC UNDER GE (WEST) JABALP

Amount

Excavation over areas not exceeding 1.50 m in depth and getting out in Soft / Loose soil complete all as specified and as directed. 779.88+5.00+5.00

Excavation over areas exceeding 1.50 m and not exceeding 3.0m in depth and getting out in Soft / Loose soil complete all as specified and as directed. 2.00+2.00

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plain area and not exceeding 1.5m deep in Soft / Loose soil, laying pipes, cables, as in foundations, etc. complete all as specified and as directed. 6.00+17.90+6.00

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming. 662.90+6.00+12.53+6.00

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. 7.00+5.37+7.00

Removal of excavated material [Soil] to a distance exceeding 1.5 Km but not exceeding 5.0 Km and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M & L for hardcore of gauge exceeding 63 mm and not exceeding 100mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface in broken boulder complete all as specified and as directed.

M & L for moorum/ red bajri filling under floors laid in layers not exceeding 15 cm thick, spread levelled and rammed / rolled including watering to required level and gradient complete all as specified and as directed.

M & L for PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed. 1.00+1.00

M&L PCC 1:2:4 type B-1 (using 20 mm graded stone agg) as in seismic and other similar bands, coping, bed block or similar works, and including necessary form work, etc., complete all as specified and as directed.

M & L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone agg) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. 2.00+2.00

M & L for RCC 1:2:4, Type B-1, using 20mm graded stone aggregate as in Slabs supported on walls, beams, columns, landings, shelves and the like complete all as specified and as directed. 2.50+2.50

M & L for precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in cover slabs for manholes, set in cement motar 1:6, including necessary formwork and moulds, complete all as specified and as directed. 1.00+1.00

Supply only integral water proofing compound complete. 10.00+10.00

M & L for brick work with sub class "B" bricks, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed. 10.00+10.50

M&L brick work with sub class ‘ B’ bricks in one brick thick honey comb walling build in CM 1:4 complete all as specified and as directed. 30.00+28.00

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including rough finished flat surfaces of concrete complete all as specified and directed. 20.00+20.00

S & F reinforcement using TMT steel bars of 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. 300+300

S & F reinforcement using TMT steel bars of 5mm to 16mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. 50+50

S & F MS work confirming to Fe - 410 - 0 or Fe - 310 - 0 for post and struts in fencing including cutting tops to shape as directed, bending to shape, notching for wire, or as in flat iron fillets for securing wire mesh etc, necessary drilling holes for securing barbed wire etc including bolting or riveting etc as required complete all as specified and directed. 60+60

Dismantling Floor, Hearth or Wall Tiling including cement mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris of the premises complete all as specified and as directed.

M & L for 75 mm thick, PCC 1:4:8, Type D-2, using 40mm graded aggregate as in Sub base for flooring complete all as specified and as directed.

M&L for 80mm thick, M 35 grade, Machine pressed precast concrete interlocking paver block of any shape and size with grey cement and pigment, confirming to IS 15658-2006, complete all as specified and as directed.

M & L for glazed ceramic tiles, coloured, first quality, of size 350x250x7mm / 450x350x7mm thick as in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry, finished with flush pointing in white cement or coloured cement to match, and including over 10mm thick CM 1:4 on fair faces of brick work or concrete surfaces as backing for tiles, etc., complete all as specified and as directed. The colour / shade / design of tiles shall be as approved by GE.

Taking down Cement Plaster any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement and including mixing of water proofing compound as per manufacturer's instructions, complete all as specified and as directed. NOTE : Water proofing compound shall be measured and paid separately under respective item of BOQ.

M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, mixed with water proofing compound as per manufacturer's instructions, surfaces finished even and smooth without using extra cement complete all as specified and as directed. NOTE : Water proofing compound shall be measured and paid separately under respective item of BOQ. 100+100

M & L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L Granite (of any type ) slab/ tiles as in cooking platform/ shelf, 18mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and cutting of holes for gas pipe complete all as specified and as directed.

M & L for 150 dia for Salt Glazed Stoneware Drain Pipes of Grade "A" laid in trenches and jointed in cement mortor 1:1, complete all as specified and as directed. 15+15

M & L for concrete bed to drain pipes of size 150 mm bore packing under and haunching against the sides of pipes after they are laid and fitted in cement concrete, Type D2, 1:4:8, using 40mm graded stone aggregate complete all as specified and as directed. 12+12

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and as directed. 5+5

M&L for loose filling with (broken bricks) aggregate of gauge 80-150 mm in soakage pits, sokage wells, complete all as specified and as directed. 10+9

M&L for Sub Main Wiring two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 4.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :-Two Nos of 6.0 Sqmm Wire and one No of 4.0 Sqmm Earth wire in One RM length Measured as one unit length.

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed/open PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge.

(a) One socket point controlled by one switch on Independent board.

M&L for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge.

M&L for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed by Engineer in charge

Supply and fixing in replacement Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed by Engineer in charge Make- Legrand , L&T, ABB.

Supply and fixing in replacement MCB single pole and neutral 240 volts 40 Amps, B Series complete all as specified and directed by Engineer in chargeMake- Legrand , L&T , ABB.

Supply and fixing in replacement MCB single pole 240 volts upto 40 Amps, B Series complete all as specified and directed by Engineer in charge Make- Legrand , L&T, ABB.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) Reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

Supply , laying and testsilng cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cab les ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 2.0 core 16 Sqmm complete all as specified and directed by Engineer in charge Make- Polycare,Havals

Material and labour for dry river washed and screened dry sand for filling in trenches below and around the cable for cushioning including punning down as specified in relevant clause of SSR Part I. Note:- Punned thickness shall only be measured and paid.

Supply and laying bricks sub class 'B' laid dry abutting each other with gap between adjacent slab not exceeding 10mm over UG cable as in cable protection all as directed.

M&L for GI Tubes,of size 40 mm dia light grade, galvanised, with all fitting , laid in trenches for protection of cable in road /drain crossing complete all as specified and as directed.

RADHEY CONSTRUCTION

Chetna Enterprises

KRD ASSOCIATE

chandra builders