Up-gradation of existing Mini Bus Stand into Bus Terminal Kishtwar by way of providing and laying WBM Grade-II,III, 50 mm thick Bituminous Macadam, 25 mm thick Premix Carpet incl. constt. of Passenger Shed demolishing of existing Toilet Block at Ktr

Amount

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : (Incl.all leads, lifts & carriages)

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete. (Incl.all leads, lifts & carriages)

Providing and laying water Bound macadam with specified stone aggregate stone screening and binding material including screening, sorting, speading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete including cost and carriage of material . (Including all leads, lifts and Carriages).

Base course with 63 mm to 45mm size incluing stone screenings 13.20 mm size. including all carriages (Including all leads, lifts and Carriages).

Base course with 53 mm to 22.40 mm size incluing stone screenings 11.20 mm size. including all carriages (Including all leads, lifts and Carriages).

Providing and Laying premix bitumen macadam base course with stone aggregate of quality, size and grading as specified in CPWD specifiaction and straight run bitumen of grade 80/100 @ 4% by wjeight of total mix including hot mixing of stone aggregate and bitumen in hot mix plant, transporting mixed material and laying mixed material with paver finisher to the required compaction and density (50mm compacted thickness complete job), Quarry (including cost of tar) (including all leads, lifts, carriages of all material complete finished item). ) (Incl.all leads, lifts & carriages)

Providing and laying 2.5 cm thick premix carpet surfacing with 2.25 cum and 1.12 cum of stone chipping of 13.20 size and 11.20 mm size respectively per 100 sqm and 52 Kg to 56 Kg of hot bitumen per cum of stone chipping of 13.20mm and 11.20mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc complete; including providing and laying seal coat & tack coat as per CPWD specification complete Job. (including cost of tar) & all other carriages.) (Incl.all leads, lifts & carriages)

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) (Incl.all leads, lifts & carriages)

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. (Incl.all leads, lifts & carriages)

Extra for cutting reinforcement bars manually/by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional areas of R.C.C. or R.B. work) as per direction of Engineer-in-charge. (Incl.all leads, lifts & carriages)

Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work (Incl.all leads, lifts & carriages)

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material In cement mortar (Incl.all leads, lifts & carriages)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area beyond 3 sqm. (Incl.all leads, lifts & carriages)

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area beyond 3 sqm. (Incl.all leads, lifts & carriages)

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. (Incl.all leads, lifts & carriages)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with 20% plumb (Incl.all leads, lifts & carriages)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (Incl.all leads, lifts & carriages)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) (Incl.all leads, lifts & carriages)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) ) (Incl.all leads, lifts & carriages)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level 5.22.1 Mild steel and medium tensile steel bars ) (Incl.all leads, lifts & carriages)

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Area of slab upto 0.5 sqm) 18mm ) (Incl.all leads, lifts & carriages)

20mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand) (Incl.all leads, lifts & carriages)

Providing and fixing bolts including nuts and washers complete. (Incl.all leads, lifts & carriages)

Centering and shuttering including strutting, propping etc. and removal of form for: (Incl.all leads, lifts & carriages)

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platforms

Providing and fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) (Incl.all leads, lifts & carriages)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm (Incl.all leads, lifts & carriages)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 (1 cement : 6 coarse sand) (Incl.all leads, lifts & carriages)

Extra for brick work with common burnt clay bricks/ cement concrete bricks in superstructure above plinth level upto floor five level (Incl.all leads, lifts & carriages)

Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick (Incl.all leads, lifts & carriages)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer (Incl.all leads, lifts & carriages)

Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2 (Incl.all leads, lifts & carriages)

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2 (Incl.all leads, lifts & carriages)

Providing and fixing plained eaves boarding. 250x32 mm (nominal size) 2nd class Deodar wood (Incl.all leads, lifts & carriages)

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm diafully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles. (Incl.all leads, lifts & carriages)

Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (Incl.all leads, lifts & carriages)

Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded (Incl.all leads, lifts & carriages)

Painting with aluminum paint of approved brand and manufacture to give an even shade. Two or more coats on new work (Incl.all leads, lifts & carriages)

Applying priming coat: With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works (Incl.all leads, lifts & carriages)

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats (Incl.all leads, lifts & carriages)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete. 50 mm thick with 20mm nominal size stone aggregate. (Incl.all leads, lifts & carriages)

Providing / fixing letters for hoding of chromim embeded (complete job) (Incl.all leads, lifts & carriages)

Providing / fixing brass strips around columns for beautification as directed in-charge Engineer (Complete job) (Incl.all leads, lifts & carriages)