8691 REPAIR REPLACEMENT TO FALSE CEILING JOINERY WORK AND RELATED WORKS OF WARDS AND ANCILLARIES UNDER AGE B R III OF GE SOUTH PUNE

Amount

M&L for 600x1200x10mm thick vitrified tiles as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 20mm thick screed bed or bedding layer in cement mortar 1:6, including dismantling old existing tiles & screed bed and removing rubbish / debries etc. complete all as specified and directed.

M&L for 600x1200x10mm thick vitrified tiles as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar 1:3, including dismantling old existing tiles & backing coat and removing rubbish / debries etc. complete all as specified and directed.

M&L for 300x300x7-8mm thick anti-skid ceramic colored tiles, square / rectangular as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 10mm thick screed bed in CM 1:4, including dismantling floor, hearth, removing rubbish off & debries etc. complete all as specified and directed

M&L for 600x600x10mm thick anti-skid ceramic colored tiles, square / rectangular as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 20mm thick screed bed in CM 1:6, including dismantling floor, hearth, removing rubbish off & debries etc. complete all as specified and directed

M&L for machine cut cudappah stone slab 30-40mm thick, one side pre-polished, laid over and including 20mm thick screed bed in CM 1:6, set and jointed in grey cement slurry mixed with pigment to match the shade of slab including grinding, rubbing and polishing etc, including dismantling of old existing stone slab & screed bed and removing of debries etc. complete all as specified and directed by Engineer-in-Charge.

M&L for 16-18mm thick granite slab, pre polished (of any type/colour) work (table rubbed and polished) as in steps, pillars, window cills / jamb, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as counters of any radius etc laid over and including 20mm thick screed bed in CM 1:4 including dismantling of existing stone slab & screed bed of any description and removing rubbish / debries etc. complete all as specified and directed.

M&L for 16-18mm thick granite slab, pre-polished (of any type/colour) work (table rubbed and polished) as in skirting and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as counters of any radius etc laid over and including 10mm thick screed bed in CM 1:3 including dismantling of existing stone slab & backing coat of any description and removing rubbish / debries etc. complete all as specified and directed.

M&L for machine cut kota stone slabs, 20-25 mm thick as in flooring laid over and including 20mm thick screed bed in CM 1:6, set and jointed with neat grey cement slurry mixed with pigment to match the shade of slab including rubbing, grinding and polishing etc. including dismantling of existing stone slab & screed bed and removing of debries etc complete all as specified and directed by Engineer-in-Charge. Note:- The size of kota stone slab shall not be less than 550mmx550mm (cut size except the location where balanced.)

M&L 12-15 mm thick machine cut kota stone slab, single piece as in steps, riser, dado or skirting etc and other similar work laid over and including 10mm thick screed bed in CM 1:3, set and jointed with grey neat cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding & polishing etc. including dismantling of existing stone slab & backing coat and removing of debries etc complete all as specified and directed by Engineer-in-Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removal of demolished materials complete all as specified and as directed

Removing building materials etc to a distance exceeding 5 Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed.

M&L for PCC type B-0, 1:2:4 (Using 12.50mm graded stone aggregate) as in leveling course complete all as specified and as directed.

S&F 12mm thick toughened glass frosted as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required complete all as directed by Engr-in-Charge.

S&F of stainless steel top pivot glass patch fitting of size 1.5 mm and 150mm length for fixing of glass door complete all as directed by Engr-in-Charge.

S&F of Stainless steel of H Type Handle 800mm length and 32mm dia suitable for glass door complete all as directed by Engr-in-Charge

M&L for rendering 10 mm thick in cement mortar 1:6 on brick / concrete surfaces as on walls finished even and smooth without using extra cement including taking down of old existing cement plaster from brick / block walling including raking out joints, hacking for key, scrubbing down with water etc incluidng removing of debries and dismantled materials complete all as specified and directed.

M&L for coloured glazed ceramic designer tiles as on vertical surface, 600x 300x 7-8mm thick size, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick plaster / backing coat in CM 1:3 including dismantling of old existing wall tiling of any type including backing coat and removing of debries and dismantled materials etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) not exc. 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and without any other damages to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frame) exc. 1.50 Sqm but not exc. 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engr-in-Charge.

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain coloured flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as per direction of Engineer-In- Charge. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door / window / Ceosetory windows & other Frames / Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Mild steel hold fast / lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Taking down shutters of any description exc. 1 Sqm each and n. exc. 2 Sqm each, complete all as specified and directed.

Taking down door shutter not exc 1.0 sqm each any description and re-fixing in same opening after resecuring or easing and adjustment and also re-fixing builders hardware etc complete all as specified and directed.

Taking down door shutter exc. 1.0 sqm but not exc. 2.0 sqm each any description and re-fixing in same opening after resecuring or easing and adjustment and also re-fixing builders hardware etc complete all as specified and directed.

M&L for easing and adjustment of door shutters, not exc 1.0 sqm each and re-fixing of builders hardware without taking off shutters complete all as specified and directed.

M&L for easing and adjustment of door shutters, exc. 1.0 sqm but n. exc. 2.0 Sqm each and re-fixing of builders hardware without taking off shutters complete all as specified and directed.

S&F in repairs readymade pulley operated clothes drying system including of 04 Nos. aluminium pipes of 2.80 m long each (4 pipe set), channel assembly, locking system ropes and all fixing material complete all as directed Make - Easy Dry or equivalent

M&L for providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections / appropriate Z sections and other sections of (Dome) of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass / stainless steel screws etc including taking down of old existing doors / windows / dome frame sections, partitions and removal of same from work site complete all as specified, directed and drawings as provided by Engineer-in-Charge.

S&F powder coated aluminium (min thickness of powder coating 50 micron) work for shutters of doors windows, ventilators including providing and fixing hinges/pivots and making provision for fixing and fitting wherever required including the cost of EPDM rubber/neoprene gasket required(fitting shall be paid separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make confirming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size, including necessary filling ups the gaps of junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. aluminium sections shall be smooth rust free, straight , mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing , paneling, CP Brass / stainless steel screws, complete including dismantling of existing doors / windows / partitions and removal from work site complete all as specified, directed and drawings as provided by Engineer-in-Charge.

S&F anodised powder coated grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design /pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete including dismantling of existing un-serviceable grill and removing from the site complete as direction by Engr-in-charge.

S&F 4.80mm thick sheet glass ordinary quality fixed with aluminium glazing clips and gasket exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F sheet glass 4 mm thick frosted ordinary quality, exc. 0.50 Sqm in each pane and glazing with oil putty or glazing pins / spring clips with steel frames complete all as specified and directed

S&F sheet glass 4 mm thick ordinary quality exc. 0.50 Sqm in each pane frosted on one side and glazing with oil putty or glazing pins / spring clips with steel frames including hacking out of existing broken glass all as specified and directed

S&F figured or pin head glass type of 4mm thick and glazing with oil putty in squares n. exc. 0.50 Sqm in each pane as in louvers of ventilators complete all as specified and directed.

S&F in repairs, stainless steel plate rack of size 36inch x 39 inch x 10inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), stainless steel screws and round pipe, fixed to wall with screws complete all as specified and as directed. Make – Blue Star Silver Shine Cat No.KPR-315 or equivalent cat part from Nirali / Jain Brothers Sanitation Pvt Ltd (Jayna).

S&F stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed.

S&F in repair stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed.

S&F in repairs stainless steel kitchen sink without drainage board of 1 mm thick with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets or fixed as in counter type in existing granite/ cudappa stone platform and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, CP brass waste coupling washers and waste pipe and fitting including bedding in cement mortar to dwarf wall or including fixing & providing cantilever brackets and connecting union to pipe, overall size of sink 1020 mm X 510 mm, bowl size 460 mm X 360 mm X 160 mm, complete all as specified and directed

S&F in repairs 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S & F continuous (piano) hinges of 20 mm flap width, Stainless Steel, bright finish or electrogalvanised complete all as specified and directed.

M&L for second class hard-wood timber, clean sawn as in scantlings, batten frame to support the paneling complete all as specified and directed

S&F in repairs 2nd class hardwood plain fillets n. exc. 3 sqcm in section, square, rectangular or triangular in section, wrought, secured with screws to partcale board as leaping complete all as specified and directed.

S&F in repairs mild steel 300mm size, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs aluminium (extruded section) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F stainless steel butt hinge, medium weight, cold rolled, 75mm long complete all as specified and as directed.

S&F 200 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 200 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100mm long complete all as specified and as directed

S&F 300mm length of bolt, aluminium alloy, anodised, sliding door bolts with hasp staple (bolt type) anf fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy, complete all as specified and directed.

S&F in repairs 300mm length of bolt, aluminium alloy, anodised, sliding door bolts with hasp staple (bolt type) anf fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy, complete all as specified and directed.

S&F mortice lock, 4 lever of brass body, vertical type of 100mm size, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F for rolled mild steel conforming to grade E-250 (Fe-410W, quality A) as in post, main and cross beams, hip and jack rafters, purlins, where connected to common rafters and running rails and guides for sliding doors, fixed with angle clips or other connecting plates complete all as specified and directed.

M&L for cast iron work grade FG 150 of articles exc. 5 kg each un-machined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F in repairs 150 mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F in repairs hasp & staple 75mm size, aluminium anodised with mild steel hinge pin, aluminium anodised, including bolt to hing plate and fixed with screws, complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description exc. 10 cm width or girth, including preparation of new steel surfaces, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exc. 10 cm width or girth, including preparation of surfaces, complete al as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair 25 micron solar control film reflective type at any height and position to glazing and windows (Gareware sun control or equivalent) complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body double tongue annodised with rubber shoe and fixed of size 140 mm all as specified and as directed.

S&F in repairs mild steel rolling shutters (Drawing as provided by Engr-in-charge) thickness of latchs 1.25mm with out ball bearing , but gear operated type with bevel gear box and crank handle as specified including top cover, an choring rod ,hasp and staple and one shop coat of primer erected in position as indicated complete gear operated type with bevel gear box size 0.15x0.12 cm and crank handle complete all as specified and directed .

S&F mild steel collapsible steel gates (Drawing as provided by Engr-in-charge), consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed

M&L for 12mm thick prelaminated particle board, exterior grade, prelaminated with one side decorative choice lamination & other side balancing white lamination, fixed with screws to timber / aluminium frame work complete all as specified and directed

S&F 0.90 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed.

M&L for stainless steel (Grade 304) railing, corner guards made of angles, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts / screws etc., of required size, on junctions of Wall etc, with suitable arrangement complete all as specified & as directed by Engr-in-charge

Dismantling of plain or corrugated steel sheeting any gauge / thickness in roof covering etc, complete all as specified and directed.

S & F roof sheeting pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F mild steel framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders: framed balusters, wall ways, railings, frame work of water tanks and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F in repairs 8mm thick seamless calcium silicate made out of 1800x1200mm size board of siliceous and calcareous material reinforced material with cellulose fiber fixed to the ceiling section with 25mm long self drilling and tapping screws having philips head with under head cutter at 200mm centre to centre including finishing the joint of face board with specially formulated jointing compound and 48mm wide fiber tape to provide seam less finish complete all as specified and directed.

S&F Gypsum Board, 12mm thick as in ceiling fixed with screw as per manufacturer’s instructions complete all as specified and directed

S&F in repairs of 12mm thick perforated fiber board / tiles for insulation and acoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified and directed

S&F GI frame work for seamless ceiling comprising of GI Perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mmcentre to centre with GI cleat and steel expansion fasteners with and including ceiling section(n. exc. 1.2m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26mmeach with lips of 105mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre with hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including dismantling and removal of old existing unserviceable ceiling and boards complete all as specified and directed.

S&F in repairs towel ring with round flange (Medium) of chrome plated of “Jaquar” make, Model No ACN-CHR-1121BN (or equivalent cat part from the make as mentioned here-in-after) mirrored finish fixed with and including brass screws and wooden/plastic cleats fixed complete all as specified and directed.

S&F in repairs 20 mm ball brass valve high pressure with polythene float and flynut, screwed down to iron pipe complete all as specified and directed

S&F in repairs 15mm bore GI pipe "medium grade" (concealed) including with all fittings & fixtures, fixed to walls / ceiling or laid in floors in any position or location including taking down of old unserviceable pipe complete all as specifed and directed.

S&F in repairs 20mm bore GI pipe "medium grade" (concealed) including with all fittings & fixtures, fixed to walls / ceiling or laid in floors in any position or location including taking down of old unserviceable pipe complete all as specifed and directed.

M&L for cutting chases, pinning in, concrete block / brick / stone walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n. exc. 10 cm girth, complete all as specified and directed.

S&F in repairs 15mm bore bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs PVC connection pipe 450mm long with 2 Nos. brass check nuts suitable for 15mm bore of pipe with washer etc. complete all as specified and directed.

S&F in repairs PVC connection pipe 600mm long with 2 Nos. brass check nuts suitable for 15mm bore of pipe with washer etc. complete all as specified and directed.

S&F in repairs stop cock ISI Marked cost copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs stop cock ISI Marked cost copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 20mm bore complete all as specified and directed.

S&F in repairs brass spindle 01 number or 03 number suitable for 15mm bib cock / stop cock / angle cock / CP piller cock, complete all as specified and directed.

S&F in repairs brass spindle 04 number and 05 number suitable for 15 mm wall mixer / WHB Mixer /Sink Mixer / CP pillar cock, complete all as specified and directed.

S&F in repairs shower rose chromium plated brass fancy type 125x125 mm with or without swivel any size, including fixing to steel pipe or union, complete all as specified and directed.

S&F in repairs PTMT waste fitting 32mm bore suitable for WHB / sink complete all as specified and directed.

S&F in repairs waste coupling, brass chromium plated 32mm dia suitable for WHB, complete all as specified and directed.

S&F in repairs waste fitting (coupling) brass chromium plated 40 mm dia suitable for sink, complete all as specified and directed.

S&F in repairs 10 Itrs capacity PVC (White) valve less syphonic action type, flushing cistern, low level with inlet ball valve float, handle. aluminium brackets for bottom support fixing with gutties embeded in wall with drilling machine etc complete all as specified and directed.

S&F 1000 litre capacity of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked of make specified, two layered construction hoisted and fixed in position with and including brass tank nipple of suitable size, PTMT ball valve, float with aluminium rod etc complete including taking down of existing unserviceable tank complete all as specified and directed.

S&F 2000 litre capacity of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked of make specified, three layered construction hoisted and fixed in position with and including brass tank nipple of suitable size, PTMT ball valve, float with aluminium rod etc complete including taking down of existing unserviceable tank complete all as specified and directed.

M&L for petty repairs low level flushing cistern of any size / description for repair of leaking water by adjusting/ replacing the washer and adjustment of lever required for making the cistern functional, complete all as directed.

S&F in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia of suitable length, suitable for low level cistern including jointing to WC complete all as specified and directed.

S&F in repairs 32mm bore, 75 cm long PVC waste pipe suitable for WHB complete all as specified and direcetd.

S&F in repairs 40 mm bore and 75 cm long PVC/waste pipe suitable for sink complete all as specified and directed.

S&F in repapir plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs viterous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and directed.

S&F vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair of size 580x440mm white including with intergral foot rest with 'P' or 'S' trap complete all as specified and directed.

S&F in repairs vitreous china ceramic white single piece WC (S or P trap with UF soft close seat cover , hinges, accessories set, size 365x655x765 mm, product Code : LYS-WHT-38851SSM of Make-“Jaquar” or equivalent cat part in makes as mentioned here-in-after, complete all as specified and directed.

S & F in repairs Urinal spreader of Brass any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F in repair chromium plated sensor pillar tap superior quality including all necessary arrgangement complete, Make:- CERA F-6010109 or equivqlent cat part from the makes as mentioned here-in-after complete all as specified and directed

S&F in repairs vitreous china counter top wash hand basin (excluding taps, waste, pipe chain and plug) but including fixing on granite platform complete all as specified and directed. Make - CERA Catmid S2020158 or equivalent cat part from the makes as mentioned here-in-after Note:- Granite support and top shall be measured and paid separately.

S&F in repairs 2mm thick PVC fibre mirror cabinet of size 450x325x120mm and fixed to wall after taking down old mirror, complete all as specified and directed. Make- CERA or Equivalent make

S&F in repairs HDPE PVC lid (cover) suitable for 501 litres to 1000 Litres capacity PVC water tanks, complete all as specified and directed

S&F in repairs CP Wall mixer 3-in-1 for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore of pipe complete all as specified and directed.

S & F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed

S & F in repairs 15 mm chromium plated 2 way bib cock fancy type with wall flange complete all as specified and directed.

S&F in repairs wash hand basin CP brass mixer suitable for mixing of hot & cold water as approved pattern, screwed down for 15mm dia iron pipe, complete all as specified and directed by Engineer in charge. Make : CERA or Equivalent make

S & F in repairs CP health faucet (ABS Body) with 1.00m long flexible rod complete all as specified and directed.

S& F in repair 5mm thick sheet glass corner shelf, 250mm radius including CP railing and CP brackets, complete all as specified and directed.

S&F in repairs mild steel chromium plated grating (round) 125 mm dia fixed over floor / nahani trap (with hole OR without hole), complete all as specified and directed.

S&F in repairs CP towel rail 600 mm long 20mm dia fixed with plastic guities with steel screws etc., complete all as specified and directed. by Engineer in charge..

S&F in repairs soap dish brass chromium plated fixed with brass screws, complete all as specified and directed.

S&F in repairs elbow operated pillar tap cast copper alloy, brass chromium plated, screw down, single leaver surgical purpose with extended operating lever of cat ID-FLR-5031N of "Jaquar" or of equivalent cat part in CERA or Hindware makes complete all as specified and directed.

S & F in repair angle cock, fancy type, 15mm bore brass chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

Cleaning the surface with wire brush, detecting sources of leakages and removing / taking down unserviceable treatment / surface and M&L for carrying out non-destructive waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, complete and as directed. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection should have minimum 100 CPS viscosity and shore hardness minimum 50. Make: PIDILITE or equivalent make as approved complete all as directed by Engr-in-charge.

M&L for preparation of old decorated surfaces of walls and applying one coat of plastic emulsion paint complete all as specified and directed

M&L for complete removal or existing treatment of walls and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying two coats of plastic emulsion paint over and incluidng a coat of primer on wall complete all as specified and directed.

M&L for preparation of surfaces of walls and applying 2mm thick wall care putty on walls including rubbing with sand papered to make surfaces even and smooth complete all as specified and directed.

PRANAV ENTERPRISES (BID ID -3305758)

MONA ASSOCIATES (BID ID -3308524)

Emerald Construction (BID ID -3309812)

Crown Chemicals (BID ID -3309637)

K S CHADHA AND SONS (BID ID -3310077)

M/s.BAJRANG CONSTRUCTION (BID ID -3309798)

SARATH ENTERPRISES (BID ID -3310096)

Gauri Associates (BID ID -3310219)