Construction of School Building, Hostel Building, Anganwadi Building and Campus Development at Khanvel, Dadra and Nagar Haveli.

Amount

Providing material and labor for Dewatering the trenches and releasing water 100m away from the toe line with diesel or electrical pump of suitable from any depth including cost of installation of pump, necessary pipeline and its maintenance.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto all lift & lead.(A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing of the excavated stuff upto all lift & lead.(C) Hard Murrum

Excavation for foundation upto 1.50 m to 3.0 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto all lift & lead. (D) Soft rock not requiring Blasting

Excavation for foundation upto 3.0 m to 5.0 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto all lift & lead. (D) Soft rock not requiring Blasting

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.

Providing material and labour for filling in foundation and plinth with RUBBLE under floors including filling gravel in gaps and consolidating deposited layers by ramming water etc. Complete.

Providing material and labour for filling in plinth WITH UNSCREEN GRAVEL under floors including watering, ramming consolidating and dressing etc. complete.

Providing, laying, Spreading and compacting 200 mm thk graded stone aggregate material In sub base coarse including mixing in a mechanical mix plant at OMC, caariage of mix Material, spreading in uniform layers with motor grader for sub base including spreading Of stone dust to fill up voids on the surface and watering compacting with vibratory roller To achieve CBR value not less than 30 as per MORTH and the desired density (as per Designed mix determined density) including all material, labour, machinery etc completed.

Providing material and labour for filling in Road with Grit under floors including watering, ramming consolidating and dressing etc. complete.

Providing material and labour for Supplying and transporting & spreading of good quality golden sand including the cost of spreading the sand, loading, unloading etc. complete. As directed by chief engineer incharge.

Rolling and consolidation of soling including filling in depression which occur during the process, with power roler 8 tonne to 12 tonne.

Providing material and labour for laying PLINTH PROTECTION including excavation of 30 cm depth and Filling with dry bricks bats of 20 cm thick and top layers C.C. 1:2:4 ( 1 cement 2 coarse sand: 4 graded stone aggregate 20m nominal size) finished in proper grade and slop etc. complete.

Providing preconstructional antitermite treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Providing material and labor for cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) with sheathing steel and curing complete including cost of formwork in (A) Foundation and Plinth.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork but excluding reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete, as directions of Chief Engineer in charge Complete.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding the Cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts upto floor two level. etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding the Cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts above floor two level upto floor three level. etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding the Cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts above floor three level upto floor four level. etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding the Cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts above floor four level upto floor five level. etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding the Cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts above floor five level upto floor six level. etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding the Cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts above floor Six level upto floor seven level. etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding the Cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts upto 4m to 7M Height. etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever upto floor two level etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever above floor two level upto floor three level etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever above floor three level upto floor four level etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever above floor four level upto floor five level etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever above floor five level upto floor six level etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever above floor six level upto floor seven level etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever upto 4m to 7M Height. etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in Lintel Beams, Girders and Cantilever upto floor two level etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in Lintel Beams, Girders and Cantilever above floor two level upto floor three level etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in Lintel Beams, Girders and Cantilever above floor three level upto floor four level etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in Lintel Beams, Girders and Cantilever above floor four level upto floor five level etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in (C) Slabs, landing, shelves and Cantilever upto floor two level, etc complete as directed by engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in (C) Slabs, landing, shelves and Cantilever above floor two level upto floor three level, etc complete as directed by engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in (C) Slabs, landing, shelves and Cantilever above floor three level upto floor four level, etc complete as directed by engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in (C) Slabs, landing, shelves and Cantilever above floor four level upto floor five level, etc complete as directed by engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in (C) Slabs, landing, shelves and Cantilever above floor five level upto floor six level, etc complete as directed by engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in (C) Slabs, landing, shelves and Cantilever above floor six level upto floor seven level, etc complete as directed by engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding cost of reinforcement for reinforced concrete work in (C) Slabs, landing, shelves and Cantilever upto 4m to 7M Height. etc complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding the cost of reinforcement for reinforced concrete work in Chajja upto and above floor two level etc complete as directed by engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding the cost of reinforcement for reinforced concrete work in Chajja Above floor two level to three level etc complete as directed by engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding the cost of reinforcement for reinforced concrete work in Chajja above floor three level upto floor four level etc complete as directed by engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding the cost of reinforcement for reinforced concrete work in Chajja above floor four level upto floor five level etc complete as directed by engineer-incharge.

Providing material & labour for laying controlled cement concrete M.250 and curing complete Including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in(B) Walls. Level up to two floor two level Shelve, counter vertical & Horizontal fins with curing as directions of Chief Engineer in charge Complete.

Providing material and labour for laying controlled cement concrete M.250 and curinng complete including the cost of formwork with sheathing steel and reinforcement for reinforced concrete work in (K) Vertical and Horizontal fins Above floor two level to three level. complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curinng complete including the cost of formwork with sheathing steel and reinforcement for reinforced concrete work in (K) Vertical and Horizontal fins Above floor three level to four level. complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curinng complete including the cost of formwork with sheathing steel and reinforcement for reinforced concrete work in (K) Vertical and Horizontal fins Above floor four level to five level. complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curinng complete including the cost of formwork with sheathing steel and reinforcement for reinforced concrete work in (K) Vertical and Horizontal fins Above floor five level to six level. complete as directed by Engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding the cost of reinforcement for reinforced concrete work in (E) Staircases upto floor two level, etc complete as directed by engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding the cost of reinforcement for reinforced concrete work in (E) Staircases above floor two level upto floor three level etc. complete as directed by engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding the cost of reinforcement for reinforced concrete work in (E) Staircases above floor three level upto floor four level etc. complete as directed by engineer-incharge.

Providing material and labour for laying controlled cement concrete M.250 and curing complete including the cost of formwork with sheathing steel and excluding the cost of reinforcement for reinforced concrete work in (E) Staircases above floor four level upto floor five level etc. complete as directed by engineer-incharge.

Providing material & labour for laying Rebar in Existing Column, Beam and Slab including all dia. Of bars 8mm to 32mm as per drawing and specification as directions of Chief Engineer in charge Complete.

Providing material and labour for TMT Bar FE500D primary reinforcement steel for R.C.C. work including bending, binding and placing in position complete, upto floor two level etc, as directed by chief engineer-incharge. Make: TATA, JINDAL, JSW, ELECTRO, THERMAL or EQUIVALENT.

Providing material and labour for TMT Bar FE500D primary reinforcement steel for R.C.C. work including bending, binding and placing in position complete, above floor two level upto floor three level etc, as directed by engineer-incharge. Make: TATA, JINDAL, JSW, ELECTRO, THERMAL or EQUIVALENT.

Providing material and labour for TMT Bar FE500D primary reinforcement steel for R.C.C. work including bending, binding and placing in position complete, above floor three level upto floor four level etc, as directed by engineer-incharge. Make: TATA, JINDAL, JSW, ELECTRO, THERMAL or EQUIVALENT.

Providing material and labour for TMT Bar FE500D primary reinforcement steel for R.C.C. work including bending, binding and placing in position complete, above floor four level upto floor five level etc, as directed by engineer-incharge. Make: TATA, JINDAL, JSW, ELECTRO, THERMAL or EQUIVALENT.

Providing material and labour for TMT Bar FE500D primary reinforcement steel for R.C.C. work including bending, binding and placing in position complete, above floor five level upto floor six level etc, as directed by engineer-incharge. Make: TATA, JINDAL, JSW, ELECTRO, THERMAL or EQUIVALENT.

Providing material and labour for TMT Bar FE500D primary reinforcement steel for R.C.C. work including bending, binding and placing in position complete, above floor six level upto floor seven level etc, as directed by engineer-incharge. Make: TATA, JINDAL, JSW, ELECTRO, THERMAL or EQUIVALENT.

Providing material and labor for Structural steel work (Confirming to IS 4923-1997) riveted, bolted or welded in builtup for all type sections, in framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the structural designs and as directions of chief engineer in charge Complete.

Design, Fabrication, Supply, All Main Material, Protection, Handover of Curtain wall system custom designed for entrance area main entry to with stand the design wind pressure confirming to IS -875 part III. microwave cured EPDM gaskets, weather sealants, backer rod, SS 304 grade fasteners & Anchor Fasteners, nylon separators to prevent bi-metallic contacts, curtain wall and the building structure all complete required to perform as per specification and drawing. The system shall be designed of floor height units spanning between the floors with Dead load & wind load brackets with provision to accommodate movement at all floor levels and at every grid panels horizontally. The system shall be designed to accommodate 24 mm DGU in vision area. System shall accommodate openable panel as per architectural requirement in the system. All fix vision glass and openable shall look similar in the elevation. Each glass panel shall be structurally glazed on the main semi unitised profile system. Each glass panel shall be supported for dead load at the bottom of glass with black anodised glass retainers two per panel. The three-barrier gasket system consists of 2nd & 3rd barrier of EPDM gaskets to achieve the required compression & seal in the system. EPDM Gaskets shall be of micro cured (Online Curing) with shore A hardness of 60-65. Flashing / Trim / Floor Closure at Parapet level, floor level, beam bottom level and required flashings shall be provided continuously with required GI / Aluminium sheet. Internal & External concealed Flashings shall be 1.0mm thk GI sheet. External exposed flashing shall be 1.5mm thk. Aluminium sheet with SDF coated matching with external Aluminium profiles. Internal exposed flashing shall be 1.5mm thk. Aluminium sheet with powder coated matching with internal aluminium profiles. The structural profiles shall have minimum 2.5mm wall thickness. All the internal visible surfaces shall have high Durability (AkzoNobel) / Super durable (Jotun) Powder coating of 60 - 80 micron confirming to AAMA 2604 & non visible aluminium surfaces shall have minimum chromicizing treatment. All shade approval shall be as per Architect's Approval. The quote rate shall include all design, engineering & shop drawing approval from architect & consultant. The quote rate shall include all Taxes, duties, statutory obligations and safety code compliance as per Client. Brand – ALUKA Profile - 56.3 x 63 x 2.5mm Profile Shutter - 50 x 50 x 2.5mm -as per detailed design and drawing or as directed by engineer in charge.

Providing & fixing the Aluminium Openable Framed Door Out, accessories with heavy duty. Door locking accessories with lock and handle with multi point locking mechanism to keep the door weather tight. The door shall comprise of Aluminium outer frame with drainage provisions & shutter frame with Euro grooves. The outer frame fixed to the semi unitised profile system with necessary SS screws & weather sealant applied from outside. The stepped glass design vent shall have ceramic frit in black at the portion of the stepped unit in case of high light transmission glass to reduce banding effect in the glazing. Profile Shutter - 50 x 50 x 2.5mm, glass thk - 8mm. complete.

Providing material and labor for fixing M.S. grills of required pattern to Granite frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws including powder coating on all members as directed by engineer in charge complete.(B)ORNAMENTAL GRILL

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as per detailed design and drawing. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as directed by engineer in charge complete.

Providing material and labour for brick work using common burnt clay building brick having crushing strength not lss than 35 kg/sq.cm. in FOUNDATION AND PLINTH LEVEL in cement mortar 1:6 (1 cement : 6 fine sand (b) conventional including curing etc. complete.

Providing material and labour for Masonary work using Autoclaved Aerated Concrete (AAC) light weight concrete block having crushing strength not less than 35 kg/sqcm for super structure above plinth level upto floor two level in cement mortar 1:5 (1 cement : 5 fine sand ) as directions of Chief Engineer in charge Complete.

Providing material and labour for Masonary work using Autoclaved Aerated Concrete (AAC) light weight concrete block having crushing strength not less than 35 kg/sqcm for super structure above floor two level upto floor three level in cement mortar 1:5 (1 cement : 5 fine sand ) as directions of Chief Engineer in charge Complete.

Providing material and labour for Masonary work using Autoclaved Aerated Concrete (AAC) light weight concrete block having crushing strength not less than 35 kg/sqcm for super structure above floor three level upto floor four level in cement mortar 1:5 (1 cement : 5 fine sand ) as directions of Chief Engineer in charge Complete.

Providing material and labour for Masonary work using Autoclaved Aerated Concrete (AAC) light weight concrete block having crushing strength not less than 35 kg/sqcm for super structure above floor four level upto floor five level in cement mortar 1:5 (1 cement : 5 fine sand ) as directions of Chief Engineer in charge Complete.

Providing material and labour for Masonary work using Autoclaved Aerated Concrete (AAC) light weight concrete block having crushing strength not less than 35 kg/sqcm for super structure above floor five level upto floor six level in cement mortar 1:5 (1 cement : 5 fine sand ) as directions of Chief Engineer in charge Complete.

Providing material & labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. for super structure above plinth level upto floor two level in Cement Mortar 1:6 (1- Cement : 6 -fine sand) & curing complete. as directions of Chief Engineer in charge Complete.

Providing material & labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. for super structure above floor two level upto floor three level in Cement Mortar 1:6 (1- Cement : 6 -fine sand) & curing complete. as directions of Chief Engineer in charge Complete.

Providing material & labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. for super structure above floor three level upto floor four level in Cement Mortar 1:6 (1- Cement : 6 -fine sand) & curing complete. as directions of Chief Engineer in charge Complete.

Providing material & labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. for super structure above floor four level upto floor five level in Cement Mortar 1:6 (1- Cement : 6 -fine sand) & curing complete. as directions of Chief Engineer in charge Complete.

Providing material and labour for 115 mm thk brick work in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) for super structure above plinth level upto floor two level (B) Conventional etc. complete. as directions of Chief Engineer in charge Complete.

Providing material and labour for 115 mm thk brick work in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) for super structure above floor two level upto floor three level (B) Conventional etc. complete. as directions of Chief Engineer in charge Complete.

Providing material and labour for 115 mm thk brick work in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) for super structure above floor three level upto floor four level (B) Conventional etc. complete. as directions of Chief Engineer in charge Complete.

Providing material and labour for 115 mm thk brick work in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) for super structure above floor four level upto floor five level (B) Conventional etc. complete. as directions of Chief Engineer in charge Complete.

Providing material and labour for Uncoursed Rubble Masonry with hard stone of approved quality in foundations and plinth in Cement Mortar 1:5 (1-cement : 5-coarse sand including levelling up etc. complete

Providing material and labour for 6mm thick cement plaster in single coat on SLAB ceiling surface for plastering above plinth level upto floor two level finished leven and smooth including curing etc. complete in C:M (1cement : 3 fine sand ) and finished with floating coat of neat cement slurry. as directions of Chief Engineer in charge Complete.

Providing material and labour for 6mm thick cement plaster in single coat on SLAB ceiling surface for plastering above floor two level upto floor three level finished even and smooth including curing etc. complete in C:M (1cement : 3 fine sand ) and finished with floating coat of neat cement slurry. as directions of Chief Engineer in charge Complete.

Providing material and labour for 6mm thick cement plaster in single coat on SLAB ceiling surface for plastering above floor three level upto floor four level finished even and smooth including curing etc. complete in C:M (1cement : 3 fine sand ) and finished with floating coat of neat cement slurry. as directions of Chief Engineer in charge Complete.

Providing material and labour for 6mm thick cement plaster in single coat on SLAB ceiling surface for plastering above floor four level upto floor five level finished even and smooth including curing etc. complete in C:M (1cement : 3 fine sand ) and finished with floating coat of neat cement slurry. as directions of Chief Engineer in charge Complete.

Providing material and labour for 6mm thick cement plaster in single coat on SLAB ceiling surface for plastering above floor five level upto floor six level finished even and smooth including curing etc. complete in C:M (1cement : 3 fine sand ) and finished with floating coat of neat cement slurry. as directions of Chief Engineer in charge Complete.

Providing material and labour for 6mm thick cement plaster in single coat on SLAB ceiling surface for plastering above floor six level upto floor seven level finished even and smooth including curing etc. complete in C:M (1cement : 3 fine sand ) and finished with floating coat of neat cement slurry. as directions of Chief Engineer in charge Complete.

Providing material and labour for 12mm thick cement plaster in single coat on brick concrete wall surface for plastering above plinth level upto floor two level finished even and smooth including curing etc. complete in C:M (1cement : 3 fine sand ) and finished with floating coat of neat cement slurry. as directions of Chief Engineer in charge Complete.

Providing material and labour for 12mm thick cement plaster in single coat on brick concrete wall surface for plastering above floor two level upto floor three level finished even and smooth including curing etc. complete in C:M (1cement : 3 fine sand ) and finished with floating coat of neat cement slurry. as directions of Chief Engineer in charge Complete.

Providing material and labour for 12mm thick cement plaster in single coat on brick concrete wall surface for plastering above floor three level upto floor four level finished even and smooth including curing etc. complete in C:M (1cement : 3 fine sand ) and finished with floating coat of neat cement slurry. as directions of Chief Engineer in charge Complete.

Providing material and labour for 12mm thick cement plaster in single coat on brick concrete wall surface for plastering above floor four level upto floor five level finished even and smooth including curing etc. complete in C:M (1cement : 3 fine sand ) and finished with floating coat of neat cement slurry. as directions of Chief Engineer in charge Complete.

Providing material and labor for 20 mm thick rough finished cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick rough finishing coat of C.M. 1:1 (1-cement : 1-sand) on exterior brick / concrete work for reciving texture paint's base coat etc. complete. For plastering above plinth level upto floor two level complete. as directions of Chief Engineer in charge Complete.

Providing material and labor for 20 mm thick rough finished cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick rough finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. For plastering above plinth level upto floor two level complete. as directions of chief engineer in charge Complete.

Supplying & Providing two coat of primer and two coats of Texture Paint on Exterior Surfaces at all heights of surfaces including cleaning, preparing the surface, applying primer - scraping by sandpaper, scaffolding etc. including - (a) All surface preparation, suitable number of base coats required, primers and suitable finishing to the complete satisfaction of the Engineer in Charge, (b) Scaffolding and all leads and lifts,(c) Proper curing in between the two subsequent coats, (d) Touch ups to the paint after the scaffolding is removed, (e) All measurements for paints to be as per IS-1200. f) Minimum Guarantee of Ten Years Waterproofing and Paint performance for all external paints by manufacturer . Make - Asian Paint Ultima Allura Torino, Jotun Jotashield Tex Fine OR Equivalent.

Supplying & Providing two coat of primer and two coats of Pattern Texture Paint on Exterior Surfaces at all heights of surfaces including cleaning, preparing the surface, applying primer - scraping by sandpaper, scaffolding etc. including - (a) All surface preparation, suitable number of base coats required, primers and suitable finishing to the complete satisfaction of the Engineer in Charge, (b) Scaffolding and all leads and lifts,(c) Proper curing in between the two subsequent coats, (d) Touch ups to the paint after the scaffolding is removed, (e) All measurements for paints to be as per IS-1200. f) Minimum Guarantee of Ten Years Waterproofing and Paint performance for all external paints by manufacturer . Make - Asian Paint Apex Createx, Jotun Jotashield Tex Fine OR Equivalent.

Providing material and labor for artistic work on walls of oil paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. Make: Birla White, Asian Paints, JK Wall Care Putty or equivalent

Providing material and labor for artistic work on pavers with block paving paint of approved manufacture as designed to the paver surfaces for snakes and ladder in the paved play area.

Providing and fixing ACRYLIC LOGO FOR " A TO Z Total 52 Nos. (One Letter Size: 750mm x 600mm x 75mm) -making of precast blocks with alphabets engraved on both sides -includes manufacturing of moulds as per required dimensions and alphabets and numbers -painting of the precast block in the required color with block painting paint or thermoplast paint or equivalent -installation of blocks on RCC coping as per detailed drawing as directed by the Chief Engineer in charge. Complete.

Providing material and labor for fixing Words in ACRYLIC FOR sculpture (Size: 5500mm x 100mm) -3D acrylic letters flushed in R.C.C. BEAM. - ACP frame should be fix in RCC beam/slab while casting with propare clamp and anchor fastener. -SIDE EDGES (300mm) -3mm thk. 75mm wide white ACP sheet inside the beam/slab ACRYLIC SHEETS & ITS TECHNICAL PARAMETERS (to be used for logo) -Front: a. 3mm thk White transparent imported (Mitsubishi/equivalent) acrylic cutting on laser cutting machine. LED Light - 3smd module -Making all necessary provision of material and electric wring etc fittings, fixtures and cleanliness as per detailed design and drawing or as directed by chief engineer in charge. LED Back lit: Pasting new vinyl stickers over the ACRYLIC substrate shall be undertaken with all care and techniques such as using pre mask tapes to the vinyl before initiating the fixing of the same over the acrylic sheets, it shall be ensured that vinyl is properly aligned to the acrylic without any gaps at the outer edges, there are no air bubbles, etc., -The workmanship shall be of high standards and chief engineering. Vinyl for the logo: The vinyl ( LG/Avery/3M or equivalent)

Providing material and labor for fixing ACRYLIC LOGO FOR " THE KHANVEL SCHOOL" (Size: 12000mm x 760mm) -3D acrylic letters flushed in R.C.C. BEAM. - ACP frame should be fix in RCC beam/slab while casting with propare clamp and anchor fastener. -SIDE EDGES (300mm) -3mm thk. 75mm wide white ACP sheet inside the beam/slab ACRYLIC SHEETS & ITS TECHNICAL PARAMETERS (to be used for logo) -Front: a. 3mm thk White transparent imported (Mitsubishi/equivalent) acrylic cutting on laser cutting machine. LED Light - 3smd module -Making all necessary provision of material and electric wring etc fittings, fixtures and cleanliness as per detailed design and drawing or as directed by chief engineer in charge. LED Back lit: Pasting new vinyl stickers over the ACRYLIC substrate shall be undertaken with all care and techniques such as using pre mask tapes to the vinyl before initiating the fixing of the same over the acrylic sheets, it shall be ensured that vinyl is properly aligned to the acrylic without any gaps at the outer edges, there are no air bubbles, etc., -The workmanship shall be of high standards and chief engineering. Vinyl for the logo: The vinyl ( LG/Avery/3M or equivalent)

Providing material and labor for applying two coats of oil paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. Make: Birla White, Asian Paints or equivalent.

Providing material and labor for applying Two coats of wall care Putty & two coat of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.as directed by engineer in charge complete. Make: Birla White.Asian Paints, JK Wall Care Putty or equivalent.

Providing material & labour for Internal Wall painting (two coats) with acrylic copolymer emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. as directed by engineer in charge complete. Make: Jotun JollyFix, Asian Paints Royale, Berger Paints - Bison Glow, Dulux Paints -SuperClean or equivalent.

Painting steel work with Epoxy based rust proof paint to give an even shade. Two or more coat applied @ 0.90 Lit/10 Sqmt. Over an under two coat of primer applied @ 0.80Lit/10 Sqmt. Of approved brand and manufacture. as directions of chief engineer in charge Complete.

Providing material and labor for fixing 16-Gauge aluminum Vertical fins for Size 200mm x 75mm for ducts including anodized aluminum butt hinges with necessary screws, fixtures and fastenings (couplings, hinges) including with all required details & members as per the detailed drawing as directed by Engineer-In-Charge etc. complete NOTE: height & width of the area where fins will be install shall measured for payment

Providing material and labor for fixing 16-Gauge aluminum Vertical fins for Size 75mm x 25mm for ducts including anodized aluminum butt hinges with necessary screws, fixtures and fastenings (couplings, hinges) including with all required details & members as per the detailed drawing as directed by Engineer-In-Charge etc. complete NOTE: height & width of the area where fins will be install shall measured for payment

Providing material and labour for fixing ISI marked Single Shutter flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with including Indian teak wood frames 15 cm x 7 cm 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws, with Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS :2046 Type S, including cost of adhesive of approved quality 1.0mm Thick on both face, with Providing and fixing S.S. tower bolts (barrel type) with necessary screws etc 200mm long x10mm dia, with Providing and fixing S.S. Door Aldrop with necessary screws etc. 300mm long x16mm dia, Providing and fixing S.S. Door Aldrop with necessary screws etc 250mm long x16mm dia, with Providing and fixing S.S. Pipe Handle for door 30cm size on both side of Door shutter, with Providing and fixing S.S hanging type floor door stopper with necessary screws, etc. complete as directed by Engineer in charge. All S.S Shall be ASIS 304 Grade. Plywood Make:- Century Ply Laminates, Greenply Industries Limited, SRG Ply & Boards or equivalent.

Providing material and labour for fixing ISI marked Double Shutter flush door shutters conforming to IS:2202 (Part-I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick and indian teak wood franes 15 cm x 7 cm including ISI marked Stainless steel butt hinges with necessary screws, with providing & fixing decorative high pressure taimax laminated sheet of plain/ wood grain in gloss/ matt/ suede finish (timax urban 5481sf)with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S, including cost of adhesive of approved quality 1.0 mm thick on both face, with providing and fixing SS tower bolts (barrel type) with necessary screws etc 200 mm long x 10 mm dia, with providing and fixing SS door Aldrop with necessary screws etc 300 mm long x 16 mm dia, Providing and fixing SS door Aldrop with necessary screws etc 250 mm long x 16 mm dia, with Providing and fixing SS pipe handle for door 45 cm size on both side of Door shutter, with providing and fixing SS hanging type floor door stopper with necessary screws etc. complete as directed by Engineer- in- charge. All SS shall be ASIS 304 Grade, Plywood Make:- Century Ply Laminates, Greenply Industries Limited, SRG Ply & Boards or equivalent.

Providing wood work in frames of Doors, windows cleare story windows and othersimilar works wrought, framede and fixed in position. (A) Indian Teak Wood

Providing material & labour for fixing FRP door 35mm thick FRP shutter with wood grain raised panneled design finish shutter having extra reinforcement on sides & edges in Gel coat finish. The core of the shutter & frame is to be filed up with injected polyurethene foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole FRP frame & shutter is to be water proof weather proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with fastener sleeve & alluminium fixtures & fastenings.

Providing material and labor for fixing WINSPIRE: 2.5 TRACK Sliding Systems fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm. Paint Specifications: Coated sections should be with Primer coat of epoxy primer of 5-7 microns thick, finish painted with Polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, OR powder coated with pure polyester powder up to 50-60 microns thick. Dimensions: Section for sliding Outer frame 2.5 Track should be of 94x44mm, Section for Glass shutter should be of 35X49mm for window. Section for Mesh shutter should be of 19X44mm. Section for Euro Groove should be 25X24mm and for Lap Strip should be 20x4mm. Spoon Section for fixing of Mesh in Mesh shutter should be 17 x6mm. Accessories: Corner brackets made of glass filled nylon/CRCA with zinc phosphating. Gasket made of Ethyl Propylene Diamine Monomer (EPDM). Locking system should be of single point locking for Windows. Single Wheel Nylon Rollers for Windows should be provided. Glass: Glass shutter should be provided with a 5mm thick Bronze Tinted Glass. Assembling & Installation: The frame & shutter Sections Should be cut to length, joined with Corner Brackets made of nylon/CRCA. Ethyl Propylene Diamine Monomer (EPDM) Gasket Should be used all around glass. Windows Frame should be fixed to brick/concrete masonry by using Nylon self- Expanding sleeves and diving MS electroplated 80mm long screws into sleeves through the frames. as directions of chief engineer in charge Complete. Make: NCL WINDOWS OR equivalent.

Providing material and labor for fixing window having extruded aluminum Colour Powder Coated section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame,aluminium mosquito net shutter with stainless steel jail as per details etc

Providing material and labor for fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt) with colour anodized alluminium frame for ventilation frame treated with 5 mm thick frosted glass as per given details for Ventilation as directed by Chief Engineer in charge etc. complete.

Providing material and labor for Fixed Louver Ventilator is fabricated from roll formed sections made of galvanized colour coated steel with a combination of specially designed components made of Nylon/Polypropylene. These are ideally suitable for Bath Rooms and Kitchens. Specification fiction: Providing and Fixing Fixed Louver Ventilator fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 153 'D' quality, galvanized as per IS 277 with zinc of 120 grams/Sq. Mtr) with total coated thickness of 0.58mm. Paint specifications: Coated Sections should be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with a Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, OR Powder Coated with pure Polyester Powder up to 50-60 microns thick. Dimensions of Sections: The section for external frame should be of 33 x 58 mm. Accessories: Glass holding flanges made of polypropylene. Assembling & Installation: The Frame Sections should be cut to length and mitre joined with Corner Bracket made of Nylon. Window Frame should be fixed to brick/ concrete masonry by using Nylon self-expanding sleeves and driving MS electroplated 80mm long screws into the sleeves through the frames.

Providing material and labor for fixing pre-cast concrete finish kerbs including Transition , Dropper & offlet kerbs, Radius kerbs, angle & Quadrant Kerbs, concrete block 600mm length, 300mm height and 150mm thick of M250 grade concrete as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete. Make:- Vyara and Supertiles or equivalent.

Providing material & labour for fixing pre-cast concrete High Strength High Finish (HSF) Brick paver block 80mm thick as per design with percentage of water absorption not more than 6%, compresive strength not less than 250 kg/Sqm. Tensile splitting strength (as per EN 1338) not less than 3.6 Mpa any colours as per approved design including 75mm Sand layer for levelling and filling the joint with sand in proper line and level etc complete. Make:- Vyara and Supertiles or equivalent.

Providing material & labour for laying polished Kota stone slab flooring over 20mm Size 600x600mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, Ghadai, handcut for taped edge etc. complete. (A) 25mm thick For Passage and Lobby Area

Providing material & labour for Kota for doing full/ double mirror polished over Item No. 48

Providing material & labour for laying polished / mirror polished kota stone slab 25mm thick in risers of steps, skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete.

Providing material & labor for laying 24" x 48" Vitrified 10 mm thick tile flooring over 20 mm (average) base of cement mortar 1:4 ( 1 cement: 4 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismantling of existing flooring and jointed with color cement slurry including finished with flush pointing & cleaning the surface etc. complete. Antiskit Tiles Flooring. Make: Nitco, Simpolo, Kajaria, johnson, Rak or equivalent

Providing material & labour for laying Vitrified tiles 8 to 10 mm thick , 24'' x 48'' in skrting risers of steps and dado on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry including finised with flush pointing & cleaning the surface etc. complete. For Dado Make: Nitco, Simpolo, Kajaria,johnson, Rak or equivelant.

Providing material & labour for 18 mm thick Granite stone slab gang saw cut, mirror polished, Overlapped together or in double layer all four side, premoulded and prepolished, machine cut for window sills, kitchen platforms, vanity counters, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. as directed by Engineer in charge complete. at all levels. Granite stone slab colour black, Cherry/Ruby red,

Providing material & labour for fixing 18mm thick Granite slab (18mm thick )1 side mirror polished premoulded and prepolished) machine cut for Platforms, vanity counters, door, window, sills, jambs, soffits, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand) joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing , curing , moulding on all exposed edges and polishing to edge to give high gloss finish etc. complete at all levels. FOR KITCHEN AND WASH AREA PLATFORM

Providing material & labour for stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade. FOR URINAL PARTITIONS

Providing material and labour for fixing 25mm to 30mm thick kadappa stone on parapet wall with cement motar 1:4 (1 Cement : 4 fine sand) and neat cement slurry as per requirement including cutting the kadappa stone etc. as directed by Enginner on Charge.

Providing material and labour for fixing Pink/White Marble on chajja with cement motar 1:4 (1 Cement : 4 fine sand) and neat cement slurry as per requirement including cutting the kadappa stone etc. as directed by Enginner on Charge.

Providing material and labour for making Black Granite stone Counter Wash Basin of 0.60mt wide with vertical & Horizontal Support of granite stone and having bottom slab of 25mm to 30mm thick kadappa stone fixing with cement motar 1:4 (1 Cement :4fine sand) and neat cement slurry as per requirement including cutting the granite stone & providing 7 fixing oval shape wash basin of 22''x16" size white colour in line & level. All exposed Edges of granite should be moulded including all accessories like pillar cock (Swan neck type), fexible inlet pipe 15mm dia, C.P. brass waste coupling 32mm, PVC Waste pipe 32mm etc. as directed by Enginner on Charge. LABORATORY COUNTER TOPS AND WASH BASIN COUNTER

Providing material, Labour and equipments for Providing and laying integral Cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations : a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer in charge over the RCC Slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks / brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in charge over 20mm thick layer of cement mortar of mix 1:5 ( 1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junction of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in charge. d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 ( 1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300 x 300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer in charge : Including Khurra & Gola work with average thickness of 120mm and minimum thickness at Khurra as 65 mm etc. complete as directed by Chief Engineer in charge.

Providing material and labour for applying Chemical Waterproof Coating PU One Coat epoxy primer and Three coat polyrethane coating including preparation of surface as required for terraces and Toilets. as approved by the Chief engineer-incharge with a guarantee of 10 years. Complete. Make:- MYK Arment, Pidilite, Sika or equivelant.

Providing material & labour for Design, Supply and installation of base layer made from RCC construction alongwith excavation, compaction, wmm and 4” RCC & synthetic acrylic flooring 5 layers along with resurfacer, primer, 2 ultra cushion technology layers and 2 layers of color along with line marking paint itf certified products.

Providing material and labor for GARDEN SOIL:- Supplying on site garden soil well sieved 90% to pass through I.S. sieve of 10mm size free from stones rubbish like dried grass roots and other such materials. The soil should be ftesh from quarry. The colour of the soil generally be red. The soil will be measured by measuring box.(Farma) (Item includes Royalty charges,, Transporting, Ioading unloading etc.) lead charges for 30 k.m. is considered.

Providing material and labor FARM YARD MANURE : Supplying on site well decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. The colur of the manure generally be black. The manure will be measured by measuring box. (Farma) (Item includes Transporting, loading unloading etc.) lead charges for 20 km is considered.

Providing labour for MIXING GARDEN SOIL/SILT & MANURE THROUGHLY WELL, Watering Pervious night, Planting required plant species, lawn gress as dricted etc. complete.

Providing material and labor for LAWN :- Supplying and planting reuired variety of lawn grass as directed and maintaining till well established by watering, weeding clipping, rolling etc. complete.

Providing material and labor for TREES:- (minium height to 3 mtr.):- digging pit with size 0.9mx0.9mx0.9m removing and conveying unwanted stuff to a required stuff to a required distance as directed. Filling the pit with approved excavated material up to a height of 0.30m. And remining height of 0.60m with fresh garden soil and manure in 3:1 proportion . mixing soil and manure thoroughly well, levelling, as directed , watering previous night, planting two to three year old , minimum 2.0 mtr. height , healthy trees sapling as per specification. maintaining till well established by watering , weeding, stirring of soil staking replacing of casualties etc. complete.

Providing material and labor for GROUND COVER (HEIGHT<1.2m ) :- Supplying and planting reuired variety of GROUND COVER as directed and maintaining till well established by watering, weeding clipping, rolling etc. complete.

Providing material and labor for CREEPERS :- Supplying and planting reuired variety of CREEPERS as directed and maintaining till well established by watering, weeding clipping, rolling etc. complete.

Providing and Installing ready made FRP MINI SLIDES at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief engineer in charge. Make play Global or equivalent.

Providing and Installing ready made TODDLER SWING at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief engineer in charge. Make play Global or equivalent.

Providing and Installing ready made Tyre(Painted) at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief engineer in charge. Make play Global or equivalent.

Providing and Installing ready made Periodic Table at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief engineer in charge. Make play Global or equivalent.

Providing and Installing ready made DNA Sculpture at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief chief engineer in charge. Make play Global or equivalent.

Providing and Installing ready made Newton's Color Disc at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief engineer in charge. Make play Global or equivalent.

Providing and Installing ready made Concave Acoustic Shells at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief engineer in charge. Make play Global or equivalent.

Providing and Installing ready made Revolving Periscope at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief engineer in charge. Make play Global or equivalent.

Providing and Installing ready made Tarang at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief engineer in charge. Make play Global or equivalent.

Providing and Installing ready made Geodesic Dome at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief engineer in charge. Make play Global or equivalent.

Providing and Installing ready made Integrated playing equipment (climbing + swing + slides , etc.) at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief engineer in charge. Make play Global or equivalent.

Providing and Installing ready made Hopscotch mat at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief engineer in charge. Make play Global or equivalent.

Providing and Installing ready made See- Saw at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief engineer in charge. Make play Global or equivalent.

Providing and Installing ready made Merry-go-round at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief engineer in charge. Make play Global or equivalent.

Providing and Installing ready made Color mats with numbers at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief engineer in charge. Make play Global or equivalent.

Providing and Installing ready made Wooden Logs cut in various shapes & with painted cross-sections at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief engineer in charge. Make play Global or equivalent.

Providing and Installing ready made Badminton net and poles at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief engineer in charge. Make play Global or equivalent.

Providing and Installing ready made Volley ball net and poles at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief engineer in charge. Make play Global or equivalent.

Providing and Installing ready made Football net and poles at pre-primary,anganwadi play ground and science park with all necessary fittings and fixtures as directed by chief engineer in charge. Make play Global or equivalent.

Providing material and labour for Indian teak wood of cross-sectional dia of 0.3m-0.4m and cut into length of 0.6m each, with tops oil painted in the required color along with necessary fixture fittings etc. for it to be fixed in the ground. Complete.

Providing and fixing in position cowel went to pipes. (C) 100mm dia (Make - Astral / Prince / Truflow or eq.)

Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self cleaning design with C.I. screaed down or higned grating including cost of cutting and making good the walls and floor 100mm inlet and 50mm outlet. (C) 100mm dia.

Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1- Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour Cistern: Providing & fixing of concealed type cistern with dual flush facility & actuator comprising of actuator button facia assembly, lid, valve, PVC siphon, fittings in built including brass / SS screws & washer complete, providing protection cover over cistern, CP brass flush pipe, bend connecting cistern to WC, connection with angle cock etc. in place of normal; low level cistern as per item no. 13.1 above . The scope include following items: CONCEALED CISTERN WITH ACTUATOR PLATE plastic seat and soft colsing cover for wash down water closer with C.P. brass hinges and rubber buffers. (B) Black plastic seal and cover. 2-Way Brass Bib Tap in Polished Chrome as per specification and conforming to Manufacturers Standards. Health Faucet with metal hose and Holder in Polished Chrome as per specification and conforming to Manufacturers Standards. (Make - Cera / Jaquar / Hindware or eq.)

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings. (A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. C.P. brass waste for washbasin or sink. (A) 32mmdia. M.I. fisher union for washbasin or sink. (A) 32mm dia. Rubber plug for sink or wash basin. chromium plated, bottle trap with necessary couplings of approved quality for wash basin. pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia (Make - Cera / Jaquar / Hindware or eq.)

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting holes in walls and making good the same but excluding fittings. (C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size C.P. brass waste for washbasin or sink. (B) 40mm dia. M.I. fisher union for washbasin or sink. (B) 40mm dia. Rubber Plug Providing and Fixing Single lever Deck Mount Kitchen Sink Cock, in Polished Chrome as per specification and conforming to Manufacturers Standards. (Same use as third floor floor lab sink too) (Make - Nirali/ Neelkanth/ Futura or eq.)

Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni trap. (make - Royal or Eq.)

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. (Make - Cera / Jaquar / Hindware or eq.)

Providing and fixing toilet paper holder.(A) C.P. Brass (Make - Cera / Jaquar / Hindware or eq.)

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (i) 15mm dia. (For Drinking Area) (Make - Cera / Jaquar / Hindware or eq.)

Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. (For wet area isolation) (Make - Sant/ Zoloto/ or eq.)

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia. (For Downtake Pipes) (Make - Sant/ Zoloto/ or eq.)

Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (i) 25mm dia. (Make - Sant/ Zoloto/ or eq.)

Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (ii) 50mm dia. (Make - Zoloto / Sant / Or eq)

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg. (make - Thermodrainor Eq.)

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm. (Internal + Downtake) (Make - Astral / Prince / truflow or eq.)

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [B] 20 mm. (Internal + Downtake) (Make - Astral / Prince / truflow or eq.)

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm. (Internal + Downtake) (Make - Astral / Prince / truflow or eq.)

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [D] 32mm. (Internal + Downtake) (Make - Astral / Prince / truflow or eq.)

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [E] 40mm. (Internal + Downtake) (Make - Astral / Prince / truflow or eq.)

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [F] 50mm. (Internal + Downtake) (Make - Astral / Prince / truflow or eq.)

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592- 1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735- 1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (For Internal & Downtake Soil + Waste Pipes) (Make - Astral / Prince / truflow or eq.)

Providing and Fixing Brass Angle Valve 15 mm in Polished Chrome as per specification and conforming to Manufacturers Standards. (For Flush tank & Basin) (Make - Cera / Jaquar / Hindware or eq)

Providing & fixing PVC Multi floor trap of self cleansing design haivng water seal not less than 50mm with necessary distance piece & making connection with grating, making necessary slab/ wall holes & cutting walls, grouting with M-15 CC all around with brick masonray support of 350x350 mm up to bottom of trap etc. complete as per specifications & drawing porvided at all places, all levels & all height. (A) 110 mm inlet and 75 mm outlet (5" height) (For Basin & Urinal Area) (Make - Astral / Prince / truflow or eq.)

Providing & fixing P- trap of self cleansing design haivng water seal not less than 50mm with necessary distance piece & making connection & support to bottom of trap etc. complete as per specifications & drawing porvided at all places, all levels & all height. (A) 110 mm inlet and 110 mm outlet (only for WC Area) (Make - Astral / Prince / truflow or eq.)

Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm. Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(i) 20mm dia. (Make - Cera / Jaquar / Hindware or eq)

Providing, Fixing, testing & commissoning 6 kg/ sq. cm PVC Pipe Selfit ISI marked brand as per IS 4985 complete including solvent cement jointing & hydraulic testing the joints & pipes as mentioned in the sepcification etc. and making connection with downtake wherever required to satisfaction of engr/ arch with proper care, protecting fittings & pipes till the final handing over etc as directed by E-I-C complete as per specifications & drawing provided for all places, all heights & all levels. Supreme or Equivalent. (A) 40 mm diameter (For Basin & Urinal Drain) (Make - Astral / Prince / truflow or eq.)

Providing and fixing Heavy class SS Grating with Cockroach proof SS strainer including setting in floor with cement motor to match with floor finish as per requirement. (A) 153 x 153mm (Make - Cera / Jaquar / Hindware or eq)

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. Each

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. (B) 150mm (Make - Indian / Pranali or Eq.)

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete. (C) 250mm (Make - Indian / Pranali or Eq.)

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2- coarse sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1- cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:3 (1-Cement : 3- coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2- Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) A type depth 0.90 Metre for 150mm diameter sewer.

Supplying and fixing C.I. cover 300mm x 300mm without frame for Gulley trap (Standard pattern) te weight of cover to be not less 4.53 Kg.) (make - Thermodrain or Eq)

Providing and erecting at the site of work steel ventilating column of 150m internal diameter and 12.20 Metre High from G.L. to bottom of top grill including C.I. grill and base plate bolts and nuts etc. and excavation in foundation of size 120cm. x 120vcm. x 165cm. and filling the pit with first layer of cement concrete 1:3:6 mix (1- cement :3-coarse sand :6-graded stone aggregate 20mm nominal size) of 120cm. x 120cm. x 90cm. and remaining pit with B.B.C. 1:3:6 mix (1-cement :3-coarse sand:6-Brickbats 40+50mm size) and providing fillet in Cement concrete 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm. nominal size) at G.L. and 3 coats of silver paint etc. complete.

Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including 500mm x 450mm C.I. horizontal grating wih frame complete.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed.

Point wiring for Light/ Bell with 2-1.5 sq. mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1kV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ ceiling complete with 6A Modular type switch/ bell push & accessories and earth continuity of following type, erected on PVC/ Metallic box, single mounting base frame covered with textured/ metallic front plate modules erected on/ in wall/ ceiling as per pipe erected, with necessary Lamp holder/ ceiling rose/ H.D.Connector as directed with medium class Rigid PVC pipe and accessories.Cat III ( Make: switboard assesoriers Anchore, L&T, Schnider or equi, Wire - RR Kebel, Finolex, Polycab)

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1kV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ flushed on wall/ ceiling complete with 6A Modular type switch and hume free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC/ Metallic box, single mounting base frame covered with textured/ metallic front plate modules erected on/ in wall/ ceiling as per pipe erected with necessary ceiling rose/ H.D.Connector as directed. with medium class Rigid PVC pipe and accessories.Cat III ( Make: switboard assesoriers Anchore, L&T, Schnider or equi, Wire - RR Kebel, Finolex, Polycab)

Point wiring for Individual Plug with earthwire of 2.5 sq.mm (Green) both are of ISI marked 1.1kV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in/ on surface of wall/ ceiling complete with Modular type switch & 5 pin Plug erected on PVC/ Metallic box covered with appropriate front plate modules erected on/ in wall/ ceiling as per pipe erected with following type of accessories. For 6A Plug with 2-1.5 sq.mm Cu. Wire with medium class Rigid PVC pipe and accessories ( Make: switboard assesoriers Anchore, L&T, Schnider or equi, Wire - RR Kebel, Finolex, Polycab or equi)

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.For 16A Plug with 2-4 sq.mm Cu. Wire with medium class Rigid PVC pipe and accessories ( Make: switboard assesoriers Anchore, L&T, Schnider or equi, Wire - RR Kebel, Finolex, Polycab or equi)

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories ( Make: switboard assesoriers Anchore, L&T, Schnider or equi, Wire - RR Kebel, Finolex, Polycab or equi)

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling ,complete with 6A Modular type switches and following type of accessories erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed.(a) with medium class Rigid PVC pipe and accessories. Cat III ( Make: switboard assesoriers Anchore, L&T, Schnider or equi, Wire - RR Kebel, Finolex, Polycab or equi)

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (b) 25 mm (make - Polycab, Vraj, Nihir or Equi.)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size.(a) with medium class Rigid PVC pipe and accessories(a) 2 wire 1.5 sq. mm (make - RR Kabel, Polycab, Finolex or Equi.)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size.(a) with medium class Rigid PVC pipe and accessories(b) 2 wire 2.5 sq. mm (make - RR Kabel, Polycab, Finolex or Equi.)

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size.(a) with medium class Rigid PVC pipe and accessories(a) 2 wire 4 sq. mm (make - RR Kabel, Polycab, Finolex or Equi.)

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size.(a) with medium class Rigid PVC pipe and accessories(b) 2 wire 6 sq. mm (make - RR Kabel, Polycab, Finolex or Equi.)

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required.(e) One wire 6.00 sq. mm (make - RR Kabel, Polycab, Finolex or Equi.)

Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing.ICS=100% of ICU only.Cat III (make - L&T, ABB, Schnider or Equi.)

Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having normal current rating up to 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III L&T, ABB, Schnider or Equi.)

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark.Cat.III (make - L&T, ABB, Schnider or Equi.)

providing and erecting Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed (i) 25 Amps.DP Cat.III (make - L&T, ABB, Schnider or Equi.)

providing and erecting Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed (i) 40 Amps.DP Cat.III (make - L&T, ABB, Schnider or Equi.)

providing and erecting Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed (i) 63 Amps.DP Cat.III (make - L&T, ABB, Schnider or Equi.)

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity.(a)32 Amp. Cat.III (make - L&T, ABB, Schnider or Equi.)

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity.(b)40 Amp. Cat.III (make - L&T, ABB, Schnider or Equi.)

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity.(c)63 Amp. Cat.III (make - L&T, ABB, Schnider or Equi.)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (A)b(iii) Single phase 8 way SS Double door (L&T, ABB, Schnider or Equi.)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used)(A)b(iv) Single phase 12 way SS Double door (L&T, ABB, Schnider or Equi.)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used)(B)b(i)Three phase 4 way SS Double door for single phase outgoing horizontal box (L&T, ABB, Schnider or Equi.)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (B)b(ii) Three phase 6 way SS Double door for single phase outgoing horizontal box (L&T, ABB, Schnider or Equi.)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (B)b(iii) Three phase 8 way SS Double door for horizontal single phase outgoing (L&T, ABB, Schnider or Equi.)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (B)b(iv) Three phase 12 way SS Double door for horizontal single phase outgoing (L&T, ABB, Schnider or Equi.)

Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted double door (IP54) fitted with copper insulated busbar, isolated neutral bar, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3, suitable for 250 AMP TPN MCCB + RCCB as incomer and three phase outgoing as per following .(The DBs should be used of same company of MCB to be used) (B)6 way outgoing (L&T, ABB, Schnider or Equi.)

Providing and erecting metallic vitrified danger notice board for HIGH VOLTAGE installation to be erected as per IS.

Providing & erecting Medium Voltage Danger Notice Board sticker of standard size

Providing & erecting High Voltage Danger Notice Board sticker of standard size

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables(B) 4 core 6 Sq. mm (Make - Havells, RR Kabel, Polycab or Equi.)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables(C) 4 core 10 Sq. mm (Make - Havells, RR Kabel, Polycab or Equi.)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables(D) 4 core 16 Sq. mm (Make - Havells, RR Kabel, Polycab or Equi.)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables(A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core) (Make - Havells, RR Kabel, Polycab or Equi.)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables(F) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.(b) 2 to 4 core 6 Sq. mm (Make - HMI or Equi.)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.(c) 2 to 4 core 10 Sq. mm (Make - HMI or Equi.)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.(d) 2 to 4 core 16 Sq. mm (Make - HMI or Equi.)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.(e) 2 to 4 core 25 Sq. mm (Make - HMI or Equi.)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.(A) 3 & 1/2 / 4 core 25 Sq. mm (Make - HMI or Equi.)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.(B) 3 & 1/2 core 35/50 Sq. mm (Make - HMI or Equi.)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.(E) 3 & 1/2 core 120 Sq. mm (Make - HMI or Equi.)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables(F) 3 & 1/2 core 150 Sq. mm (Make - HMI or Equi.)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables(I) 3 & 1/2 core 300 Sq. mm (Make - HMI or Equi.)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables(J) 3 & 1/2 core 400 Sq. mm (Make - HMI or Equi.)

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.(A) 6 Sq.mm (Make - 3M or Equi.)

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.(B) 10 Sq.mm (Make - 3M or Equi.)

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (C) 16/25 Sq.mm. (Make - 3M or Equi.)

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (C) 35/50 Sq.mm. (Make - 3M or Equi.)

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.(G) 120 Sq.mm. (Make - 3M or Equi.)

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.(H) 150 Sq.mm. (Make - 3M or Equi.)

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.(K) 300 Sq.mm. (Make - 3M or Equi.)

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.(L) 400 Sq.mm. (Make - 3M or Equi.)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables(B) 3 1/2 core 50 Sq. mm ( 25 Sq. mm 1/2 core) (Make - Havells, RR Kabel, Polycab or Equi.)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables(E) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) (Make - Havells, RR Kabel, Polycab or Equi.)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables(F) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core) (Make - Havells, RR Kabel, Polycab or Equi.)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables(I) 3 1/2 core 300 Sq. mm ( 150 Sq. mm 1/2 core) (Make - Havells, RR Kabel, Polycab or Equi.)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables(J) 3 1/2 core 400 Sq. mm ( 185 Sq. mm 1/2 core) (Make - Havells, RR Kabel, Polycab or Equi.)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables(I) 3 & 1/2 core 300 Sq. mm (Make - HMI or Equi.) (for school panel main I/C cable)

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.(B) 10 Sq.mm (Make - 3M or Equi.)

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (C) 16/25 Sq.mm. (Make - 3M or Equi.)

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner(H) 150 Sq.mm. (Make - 3M or Equi.)

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.(H) 300 Sq.mm. (Make - 3M or Equi.) (for school panel main I/C cable)

Providing and erecting 3 star and above rated approved make split air-conditioning unit consisting of condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of proper insulated copper tubing up to 5 RMT suitable for (Cost includes M.S. Stand, Gas Charging & Internal Copper Wiring & Remote Control) (B) for 2 ton capacity (Make - Mitsubishi, Dikin, Blue star or Equi.)

Supplying & Installing M.S. powder coated standard type stand mounting for outdoor unit of Split A.C. up to 2TR Capacity, erected with necessary hardware materials as directed. (Make - Mitsubishi, Dikin, Blue star or Equi.)

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2 , 3 core flexible wire with earthing.[Make shall be approved by Engineer in charge] (Make - Cromption, Bajaj or Equi.)

Supplying & erecting single phase approved make turbo exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM [A] 305 mm dia 900 RPM CAT-II (Make - Cromption, Bajaj or Equi.)

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt , LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates) (D) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.© 12-15 watts, 200 x 200 mm, Surge-2 KV Cat-lll (Make - Havells, Philips Wipro, or Equi.)

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt , LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates) (D) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.(g) upto 45 to 48 watts, 600 x 600 mm, Surge-4 KV Cat-ll (Make - Havells, Philips Wipro, or Equi.)

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt , LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates) (D) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.(C) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20 (C) 22-24 watts, Surge-2 KV Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt , LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates) (A) Tube Light with integral/ non-integral driver.(E) 36 Watts, Surge-2 KV, IP-20 Cat-ll (Make - Havells, Philips Wipro, or Equi.)

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt , LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates) (A) Tube Light with integral/ non-integral driver.(D) 22-24 Watts, Surge-2 KV, IP-20 Cat-lll (Make - Havells, Philips Wipro, or Equi.)

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate including value of earth resistane of installation. (b)For Electrical installation up to 11 KV in normal soil. Length of Pipe : 2.00 mtrs Back filling Compound :1 no. Bag of 25 Kg. (Make - True power, Ashlok, or Equi.)

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate including value of earth resistane of installation. [C] For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc.. -Length of Pipe : 3 Mtrs. -Back filling Compound :2 nos Bags of 25 Kg (Make - True power, Ashlok, or Equi.)

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. (b)For Electrical installation up to 11 KV in normal soil. Length of Pipe : 2.00 mtrs Back filling Compound :1 no. Bag of 25 Kg. (Make - True power, Ashlok, or Equi.)

Providing and erecting required size Aluminium strip for earthing of H.T. , OCB / ACB / Transformer, LT panel board, Motors etc. using copper clamp. (Make - True power, Ashlok, or Equi.)

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D 4 mtr. Long duly painted with two coats of aluminium paint complete with metallic base plate of 300 mm x 300 mm x 4mm thick for using as a compound light pole with approx. weight 32 Kg. (Make -goverment aporvied Make)

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support( included) as per Specification and as per instruction of engineer in charge..(3) 150 X 50 X 1.6 mm Thick (Make -goverment aporvied Make)

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support( included) as per Specification and as per instruction of engineer in charge..(5) 300 X 50 X 2.0 mm Thick (Make -goverment aporvied Make)

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support( included) as per Specification and as per instruction of engineer in charge..(6) 450 X 50 X 2.0 mm Thick (Make -goverment aporvied Make)

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support( included) as per Specification and as per instruction of engineer in charge..(7) 600 X 50 X 2.0 mm Thick (Make -goverment aporvied Make)

Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of the water should drop by 150 C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 Osg inline type post carbon filter auto low & high pressure switches with following size of storage tank & LPH capacity & erected as directed with one year comprehensive maintenance guarantee. 50 Ltr / Hr with 250 psi 2 nos booster pump (Make -goverment aporvied Make)

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D 6 mtr. Long duly painted with two coats of aluminium paint complete with metallic base- plate of 300 mm x 300 mm x 4mm thick for using as a compound light pole with approx. weight 47 Kg. (Make -goverment aporvied Make)

Supplying and erecting Pole base suitable for following size of pole fabricated from 4 mm. Thick M.S. sheet with M.S.door having two hinges welded on M.S. flat 25 x 3 mm which is fitted on M.S..base by bolts welded inside the pole base erected with one coat of Red oxide and two coats of Aluminium paint. Outside dimension as per SOR. drawing.(a) Suitable for 90 mm. dia.base of pole (Make -goverment aporvied Make)

Providing and erecting C.I./M.S. flange type base plate of 300mm x 300mm x 6mm

Providing and erecting cable clamp of 25 mm X 3 mm M.S. flat suitable for fixing 2 Nos.of armoured cable with nuts and bolts. (b) for 114 mm dia. Pole

Supplying and erecting Fabricating terminal box for street light pole made from 16 SWG M.S. sheet having following size complete with fixing arrangement for terminal board, with necessary hole for wire entry and exit from the box. The box shall be provided with cover and hinges on one side and bolting at other end The box shall be fixed by clamps fabricated from 25mm x 6mm flat.The box shall be painted with one coat of red oxide and two coats of paint having following box size. 330 mm x 260 mm x 140 mm (depth)

Providing and erecting street light pole bracket comprising main B Class MS pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of arms.[A] Single Arm bracket 1 Mtr (Make -goverment aporvied Make)

Providing and erecting street light pole bracket comprising main B Class MS pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of arms.[B] Double Arm Bracket 1 Mtr (Make -goverment aporvied Make)

Providing and erecting street light pole bracket comprising main B Class MS pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of arms.[D] Four Arm Bracket 1 Mtr (Make -goverment aporvied Make)

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected as directed. (Make -goverment aporvied Make)

Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per direction Cat III [D] 4 pole 440V 40 Amp. (Make -goverment aporvied Make)

Coil type earthing, coil made from 8 SWG galvanised iron wire with 50 mm OD and 50 turns (length of turns approx. 200 mm) and having additional continuous streight length of 3.00 mtr at open end and should be connected to earthing bolt and burried in 1.5 mtr deep specially prepared earth pit complete with salt and charcoal/coke as required for coil type earthing.(Approx weight of coil 1.0 to 1.1 Kgs)

Supplying, erecting, testing, commissioning approved make M.S. Polygonal High Mast Pole having following general Specification. (a) Polygonal Section fabricated from M.S. Plate confirms BSEN 10025 & Hot deep galvanized minimum 65/86 micron (as per IS 2629 /1985) Lantern carriage with ring and rubber lines for erection of luminaries of suitable site. (b) Maximum telescopic section not more than four (c) Double drum gear pipe motorized winch with 6mm dia S.S. Rod (For 16 mtr and above size) (d) Approved make L.E.D. aviation light = 1 No. Lightening arrestor = 1 No. with necessary wiring of 2.5 sq.mm 5 core ISI copper cable Unarmoured. (e) Bottom most section suitable for mounting reversible motor and switchgears having door not more than 1400mm x 300mm with waterproof gasket & hinges & locking arrangement. (f) Pole structure comprises suitable size of reversible motor, cable and necessary switchgears with control panel. (g) bottom section shall have suitable size of thickness supports ribs foundation bolts nuts etc. (h) Item not comprises the cost of lanterns. (i) Necessary Cement Concrete foundation as per IS including testing & commissioning of the entire structure for following size of High Mast poles [1] High Mast 12 Mtr. TOP A/F 105 mm, BOTTOM A/F 360mm, No. of Sec. No. - 1, Bottom Thickness - 3 mm, Size of Base Plate - Dia 520 mm x 20 mm thick, Foundation Bolt Size M24 x 850 mm, Qty - 6 Nos., Suitable for mounting Fitting of Light - 6 Nos. (Make -goverment aporvied Make)

SUBSTATION-Providing, erecting, testing & commissioning approved make oil immersed ONAN cooled, double wound, core type indoor / outdoor copper wound 11KV/ 433V step down transformer of following capacities operating on 3 phase, 50 Hz 4 wire & neutral earthed system continuously rated for a full temperature rise in oil not exceeding 45 Deg.C.at maximum ambient temp. of 50 Deg. C. complete with necessary radiator first filling of new transformer oil & standard fitting as below complying with IS 1180( Part 1 ):2014 standards with energy efficiency level 2 Off load tap changing range steps +2.5% to -5% on H.V for variation should be provided. The H.V. shall be connected Delta & Secondary with star connection. The transformer should have cable-end boxes on H.T. side suitable for up to 3 core 150 sq.mm. XLPE cable & on L.T. side suitable for bus duct or cables as per requirement complete with test certificates from manufacturers.

Providing, erecting, testing commissioning & getting Plan Approval as well as NOC from Electrical Inspector for extensible H.T panel comprising of one 400A. H.T. VCB incoming & Two outgoing 400 A Drawout type VCB confirming as per I.S. for use on 11 KV, 3 phase, 50 c/s. unearthed A.C. supply system having breaking rupturing capacity of 350 MVA complete with spring operated mechanism, mechanically & automatic ON-OFF and spring mechanism charged, discharged indicators, ON-OFF mechanical push button, operation counter necessary auxiliary switches, closing shunt trip, air insulated busbar chamber having heat shrinkable PVC sleeves, mechanical interlocks safety shutters, isolating plugs and a VCB trolley with three vacuum interrupters with epoxy support insulators and self aligning finger type isolating contacts. The breaker shall be Manual cum motorised mechanism & auto spring charge with TNC switch closing with following accessories.

Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed below: 1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator contactor Neutral contactor for mains and generator Power socket for connections. 2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency stop push buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing studs.

Design, Supplying, installing, testing of factory fabricated ready made Three phase APFC Panel Cubical Panel fabrication should be type tested as per IEC 61921, 61439:1&2 Capacitor Duty Contactor for switching as per following Steps Incomer Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with Microprocessor based OC, SC, internal earth fault protection Incomer Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with Microprocessor based OC, SC, internal earth fault protection,Copper tinned insulated Busbar,Cubical panel should be indoor type with IP 43 and IK 10,Metalized polypropylene film tye3-phase 550Volt Capacitor,De tuning Reactor for each capacitor,Panel having Short Circuit and Overload protection,Each step Capacitor having suitable MCCB with Sc, OL, internal earth fault relay,Each stage having Stage Contactor (Capacitor load rating),PF regulator master controller having suitable steps with LCD display, Rs 485 Communication port, Indication LED Lamps for main incomer and ON-OFF for each capacitor bank,MS Chanel for Floor mounting, Cable entry as per site situation,Cooling fans for panel

SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 mm long. Air Termination Base tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST 34mm dia 3000 mm long- Cold Galvanized -LIGHTENING ARRESTER (make - true power, ashlok or equi.)

SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid and tested as per IEC 62561- 2 conducted in the Govt. accredited thirty party laboratory to meet the requirement of IS/IEC 62305 with Required Accessories - Aluminium Holding clamp at every 1 mtr distance, Aluminium/SS cross splicer at every crossing of Alu. conductor, Expansion piece with connectors at every 20 mtr distance, Aluminium straight Splicer to connect conductors. All Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA of 10/350µs waveform(Ageing & Electrical test ) conducted in a sequence manner & tested in the Govt. accredited Third party laboratory to meet the requirements of IS/IEC 6230 (Make -Ashok layland, Eicher, TATA or equi)

SITC of Galvanized Steel Flat 25x6 mm thickness from earth electrode directly in ground as required. Zinc coating: 500 g/m square (Approx:70 micron coating) tested and used exclusively for lightning protection earthing system and ring equipotential bonding. (Make -Ashok layland, Eicher, TATA or equi)

SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 micron copper bonding & 1 bag of Carbon fill Based environment friendly backfill tested as per IEC 62561-7 in NABL accredited Laboratory and suitable stainless Steel double sided clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height). (Make -Ashok layland, Eicher, TATA or equi)

Supply, Installation, Testinga and Commissioning of following Panels including unloading to the site of erection, assembly including mounting and wiring of loose parts supplied by vendors. Interconnection of shipping sections and required interpanel wiring between shipping sections Installation on RCC cable trench or directly on floor as indicated in drawings, aligning, levelling, grouting. Testing and setting / adjusting relays and meters, including all labour and materials as per standard specifications, Single Line Diagram and as per directions of Engineer-in-charge. - SCHOOL BUILDING MAIN ELECTRICAL PANEL

Supply, Installation, Testinga and Commissioning of following Panels including unloading to the site of erection, assembly including mounting and wiring of loose parts supplied by vendors. Interconnection of shipping sections and required interpanel wiring between shipping sections Installation on RCC cable trench or directly on floor as indicated in drawings, aligning, levelling, grouting. Testing and setting / adjusting relays and meters, including all labour and materials as per standard specifications, Single Line Diagram and as per directions of Engineer-in-charge. - HOSTEL BUILDING MAIN ELECTRICAL PANEL

Supply, Installation, Testinga and Commissioning of following Panels including unloading to the site of erection, assembly including mounting and wiring of loose parts supplied by vendors. Interconnection of shipping sections and required interpanel wiring between shipping sections Installation on RCC cable trench or directly on floor as indicated in drawings, aligning, levelling, grouting. Testing and setting / adjusting relays and meters, including all labour and materials as per standard specifications, Single Line Diagram and as per directions of Engineer-in-charge. - MAIN LT PANEL

Supplying and erecting LED outdoor fittings with LEDs of wattage 15W , Exteriore Grade up down light , Min lumen 1200 , IP 66 , IK 07 , 3000 K. with all necessary equipments as directed by Engineer-In-Charge etc. complete. ( make: Osram, Wipro or equi.)

Supplying and erecting LED outdoor fittings with LEDs of wattage 25W , LED SPIKE LIGHT , Min lumen 1200 , IP 66 , IK 07 , 3000 K. with all necessary equipments as directed by Engineer-In-Charge etc. complete. ( make: Osram, Wipro or equi.)

Supplying & erecting approved make Hanging Light - 25W , RING TYPE - 3000Kith all necessary equipments as directed by Engineer-In-Charge etc. complete. (make: Osram, Wipro or equi.)

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge (3) Two Pin/RJ-11 Telephone Socket (make- Anchore, D-link or equi.)

- do - but Modem Jack for Computer Open RJ-45 (make- Anchore, D-link or equi.)

- do - but Modem Jack for TV CO-AXIAL SOCKET OUTLET (make- Anchore, D-link or equi.)

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction [C] CAT - 6 ( make - RR cable, Polycab or equi.)

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary connections.( make - RR cable, Polycab or equi.)

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following size to be erected as directed.b) 1.00 Sq.mm twin twisted ( make - RR cable, Polycab or equi.)

SITC of Combo Phone / 3 Line LCD / Intercom feature / Digital Answering Machine / 150 Names Phonebook / 2 Way spkr / 5 One touch memory / 3 Way conference / ext call transfer ( Make - Pansonic or equi)

SITC of Ringer LED Indicator, Ringer Volume Control, Receive Volume Control, Tone/Pulse, Flash, Redial, Mute, Desktop/Wall-mountable - telephone ( Make - Pansonic or equi) ( Make - Pansonic or equi)

SITC of Digital / PCM / TDM EPABX System having SMT design, system with flexible universal slots. Inbuilt Auto attendant facility, Minimum 15 Nos. conference, Analog extension line, Calling GSM, E&M line, PRI / EI & VOIP program me through Analog telephone digital key from Ethernet, public address cord, shall have unrestricted simultaneous dialing facility, QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of Service, Quick Dial-Single Digit dialing of any two external number, Once only ring device, Boss/Secretary-Do not disturb Facility, Power Down Mode, Hot Line, Hot Outward Dialing, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call Transfer, Call transfer while Ringing with Voice Guide System, (DISA), Caller ID (CLI), CLI Base ECF, CLI Base routing Internet Ready Port, External Music Port, Call Budgeting, Call Most Calculation (ASMDR), DID Direct Inverse Dialing, External Music Input, Fax Homing, Global Directory Printing with following capacities[A] No of Extension 16, No of Junctions 6, 8 Port IP Resource in-built, 4 Port Web base Video Conferencing, No of expandable ports : 64, Operators Console - 01 Compatible : ISDN ( make: - government apporved brands)

IP Dome Camera 1/2.8" 5 Megapixel Progressive Scan Sony Sensor, 2592 x 1944 Pixels (5.0 Mega Pixels)/2704 x 1528 Pixels (4.0 Mega Pixel)/1080P/720P, IR distance15/20/30 Meters, 4.0MM/6.0MM Lens, Auto (ICR) / Color / Black & White, ≥120db,HTTP, TCP, ARP, RTSP, RTP, UDP, RTCP, SMTP, FTP, DHCP, DNS, DDNS, PPPoE, IPv4/v6, SNMP, QoS, UPnP, NTP,DC12V / 2Amperes, Video Encoding H.265+, H.265 and H.264, 128kbps ~ 8Mbps Video Bitrate ( Make - Hikvision, Securus, Dahua or equi)

SITC of 8 x 10/100/1000BASE-T PoE ports 2 x Gigabit SFP ports Advanced L2 switching and security features L2+ Static Routing Optional “standard mode” or “surveillance mode” management user interface 65W PoE budget FOR CCTV ( make: - government apporved brands)

SITC of 24 x 10/100/1000BASE-T ports 4 x Gigabit RJ45/SFP Combo ports Advanced L2 switching and security features L2+ Static Routing Optional “standard mode” or “surveillance mode” management user interface - FOR LAN

SITC of 24 x 10/100/1000BASE-T PoE ports 4 x Gigabit RJ45/SFP Combo ports Advanced L2 switching and security features L2+ Static Routing Optional “standard mode” or “surveillance mode” management user interface 193 W PoE budget FOR CCTV ( make: - government apporved brands)

SITC of 48 x 10/100/1000BASE-T ports 4 x Gigabit GbE/SFP combo ports Advanced L2 switching and security features L2+ Static Routing Optional “standard mode” or “surveillance mode” management user interface FOR LAN ( make: - government apporved brands)

Supplying & erecting Philips Ahuja make or equivalent Amplifier having following specification: Power Output :250W (RMS) (300W Max.) inputs : 6 Misc. & 2 Aux. frequency Response :50-1500HZ I3db Tone Controls :Cut & Boost type LED Meter :5 LED Arrays The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with automatic changeover from AC to Battery operation, duly protected by wrong Battery Polarity connections.

Supplying & erecting Mixing Console having channels, Audio mixer with. Echo facility for live performance, Auditorium & stadiums, having following features & facilities.(a)input Channels :- Each channel has separate 6.25mm size balanced phone jack for mike & line for balanced & unbalanced signals.(b)Individual gain control for sating optimum level for minimum noise.(c)BASS, MID & TREBLE ‘ controls Separately for each input channel.(d)ECHO control for each channel(e)PAN control for echo channel for left or right output(f) AUX Control : To control , level of the channel in final mix to AUX sound output(g)Channel ON/OFF switch(h)ECHO Section :- ECHO, reverb & Chorus effect can be added to all input channel by different setting of Delay, Reverb & Level control.(i)Tape section(j)Aux. send & return For sending Pre-feeder output of channel for monitoring or adding a special effect unit.(k)Mono / Stereo output controls(L)Master faders to control over left & right output (m) Head phone output for monitoring purpose.Technical specification (a)Power Requirement -AC220-24OV 50 Hz DC 24 Volts(b)MIC Output Impedance/gain -2 K Ohms/ 62 dB(c)Line Output Balance/42 dB —- 20 K ohms(d) Impedance / Gain :- 10Kohms unbalance / 42 dB(e)frequency Response - 30 Hz- 20 KHz L / R Line Output ( + 0, -1 dB )(f)Equalization Bass/ - + / - 12 dB at 100Hz Mid / Treble 2 KHz / 10 KHz(g) Outputs, Line Output Line Output Low : -10 dB / -2 dBM Line Output High : 0 dBM / +17 dBM (775 mv / 5.5 V )(h) S/N ratio Line Output Level : > 70 dB (0 dB, 0.775V) The Console shall be mounted on standard Rack, The channel of following numbers.(A) 14 Channel Audio Mixer with ECHO ( make: - government apporved brands)

Supplying & erecting recess wall mounting speaker with 5W rated input power 3.3 K. Ohms / 3W impedance, 100 - 10000 Hz frequency response with 6 inch dia. cone type 8 ohms speakers duly fitted in ABS plastic cabinet of colour match with wal

SITC of 65" Smart Interactive 4K display |7H hardness toughen anti glared glass | In-built Android 8.0, RAM 3 GB, 16 GB ROM |10 Points Touch in Android and 20 points Touch in Windows | Smart Object recognition and responsive multi-touch | Multiple Inputs for connectivity | 15W x 2 Speakers | Inbuilt Screen Sharing Software | Slimmer Frame|Customize GUI| Wireless presentation with Quad View Option| Broadcast upto 200 Devices | Remote Display Management ( make: - government apporved brands)

SITC of Video frame rate PAL: 1-25FPS NTSC: 1-30FPS Video bit rate 1536kbps-3072kbps Stream Type Video & Audio/Video Audio compression G.711a Recording mode Always/Schedule/Alarm/ recording/Motion detection recording Video search Time/Channel/Event Display Zoom Live Playback & Mobile Audio bit rate 8—32kbps Dual-stream Supports- Recording resolution 32 CH Realtime Recording HDD Port 8 SATA HDD Maximum Capacity 8TB for each Sata connector Voice talk Support, 1CH BNC line in/1CH RCA Audio out. Record mode Audio & Video recording simultaneously Remote control Supports Network protocol Supports IE/PPPoE/DDNS, Network 2 RJ45 10M/100M/1000M USB Connector 2 USB 2.0, 1 USB 3.0 Firmware update Support USB update/Network update Alarm input 16 Alarm output 4 Power supply ATX Operation Temperature -10℃--＋55℃ Operation Humidity 10％--90％ Chassis Standard 2.0U Dimension 427.5mm (W) × 443mm (L) × 92mm (H) Weight(without HDD) ≤ 6.0Kg Certifications CE, FCC - Network Video recored (NVR FOR CCTV) ( make: - government apporved brands)

Supplying and erecting approved make online Un-interruptible Power Supply system with IGBT Based rectifer and Inverter & sealed maintenance free batteries. Three phase Input and Three Phase output with Inbuilt Isolation transformer with 0.9 load power factor with battery, over under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following capacity & with Following size of batteries for 30 Min Backup (Minimum 18000 VAh) 20 KVA UPS with 75 AH, 20 Nos. Battery ( make: - government apporved brands)

SITC of SCREEN SIZE 80 cm diagonal (32” INCH), RESOLUTION HD (1366*768), USB INPUT (2.0 SUPPORT) 2*Side(USB2.0), HDMI INPUT 3*Side(HDMI 1.4), USB DEVICE SUPPORT USB Supported HDD, HOTEL MODE Yes, Basic, BLUETOOTH Yes (Ver. 4), WIFI TYPE(STANDARD) 802.11a/b/g/n 2.4G 2T2R, Built-in, WIFI BAND TYPE 2.4GHz, OS & VERSION INFO Android 'P' - 9.0, MEMORY FLASH 8GB EMMC, RAM 1.5GB , DDR3 2133 Mhz. ( Principal cabin)

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / Wrapping coating / excavation - backfilling etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. a) 150 mm dia. (MAKE - TATA / Jindal (Hissar) / SAIL)

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / Wrapping coating / excavation - backfilling etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. a) 100 mm dia. (MAKE - TATA / Jindal (Hissar) / SAIL)

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / Wrapping coating / excavation - backfilling etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. a) 100 mm dia (FOR WET RISER INSIDE THE BUILDING) (MAKE - TATA / Jindal (Hissar) / SAIL)

Supply, installation, testing and commissioning of C.I. Butterfly valve (PN 1.6) with flanges, nut bolts, gaskets complete as required. a) 100 mm dia MAKE - Sant / Leader / Zoloto

Supply, installation, testing and commissioning of C.I. Butterfly valve (PN 1.6) with flanges, nut bolts, gaskets complete as required. a) 150 mm dia. MAKE - Sant / Leader / Zoloto

b) 100 mm dia MAKE - Sant / Leader / Zoloto

Supply, Installation, Testing and Commissioning of Cast iron Dual plate Check valve (PN 1.6) a) 150 mm dia. MAKE - Sant / Leader / Zoloto

Supply, Installation, Testing and Commissioning of Cast iron Dual plate Check valve (PN 1.6) a) 100 mm dia.

Supply, installation, testing and commissioning S.S. Single Headed Fire Hydrant Valve with 80 mm N.B. flanged inlet, 63 mm dia female instantaneous outlet type. S.S. coupling, blank cap, chain, twist release type lug & all accessories Conforming to IS:5290. Including fixing with supports, flanged tapping from wet riser, orifice plate complete as required by the Local Fire Authority. MAKE - Swati / Winco / Newage

Supply, installation, testing and commissioning S.S. Single Headed Fire Hydrant Valve with 80 mm N.B. flanged inlet, 63 mm dia female instantaneous outlet type. S.S. coupling, blank cap, chain, twist release type lug & all accessories Conforming to IS:5290. Including fixing with supports, flanged tapping from wet riser, orifice plate complete as required by the Local Fire Authority. MAKE - Swati / Winco / Newage

Supply, Installation, Testing and Commissioning of Weather proof Standard FRP Fire Hose Cabinet wall mounting type (750 mm x 600 mm x 250 mm deep) having single or double opening with necessary locking arrangement by allan key suitable for housing 2 nos. hose pipe, 1no. Branch pipe & nozzle spanner. MAKE - Swati / Winco / Newage

Supply, installation, testing and commissioning non-percolating rubber reinforced lined fire Hose pipe (as per IS : 636) of 63 mm dia and 2x15 mtrs long. The hose shall be rated for burst pressure of 35.7 Kg/sqcm. Hose shall be complete with ISI marked SS male & female coupling (IS:903) bound & riveted to hose pipe with copper rivets & 1.5 mm copper wire. MAKE - Swati / Winco / Newage

Supply, installation, testing and commissioning non-percolating rubber reinforced lined fire Hose pipe (as per IS : 636) of 63 mm dia and 2x15 mtrs long. The hose shall be rated for burst pressure of 35.7 Kg/sqcm. Hose shall be complete with ISI marked SS male & female coupling (IS:903) bound & riveted to hose pipe with copper rivets & 1.5 mm copper wire. MAKE - Swati / Winco / Newage

Supply, Installation, Testing and Commissioning of Weather proof Standard FRP Fire Hose Cabinet wall mounting type (750 mm x 600 mm x 250 mm deep) having single or double opening with necessary locking arrangement by allan key suitable for housing 2 nos. hose pipe, 1no. Branch pipe & nozzle spanner. MAKE - Swati / Winco / Newage

Supply, Installation, Testing and commissioning of 63 mm dia instantaneous pattern SS short branch pipe, 20 mm dia nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling complete as required by the Local Fire Authority. MAKE - Swati / Winco / Newage

Supply, installation, testing and commissioning of First Aid Hose Reel equipment conforming to IS:884 comprising of hose reel drum, 8 mm shut off nozzle, Rubber hose reel tubing as per IS: 444 of 25 mm dia x 30 mtr. long, painting, Manual fix type with fixing bracket, anchor fastener, bolts & nuts etc. complete as required by Local Fire Authority MAKE - Swati / Winco / Newage

Supply, installation, testing and commissioning of SS Ball Valve. a) 25mm dia MAKE - Sant / Leader / Zoloto

Supply, Installation, Testing and Commissioning of Gun Metal Air Release Valve with necessary fittings. Size: 25 mm (For Riser) MAKE - Sant / Leader / Zoloto

Supply, Installation, Testing and commissioning of Quartzoid Bulb type Sprinkler Heads. a) Pendent Sprinkler 57°C

Supply, Installation, Testing and commissioning of Flow Indicating Switch with fittings, Flanges, nut-bolts, washers etc. as per requirement. MAKE - Honeywell / System Sensor / Potter / Newage – Surendranagar

Supply, installation, testing and commissioning of Pump on/off Remote switches to each internal hydrant valve with required accessories. MAKE - C & S / L&T / equivalent

II) FIRE EXTINGUISHER AND SIGNAGES Supply, installation, testing and commissioning of Carbon Dioxide (Co2) type Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI marked / TAC approved fitted with required accessories including wall suspension brackets. MAKE - Safex / Minimax / Kanex

Supply, installation, testing and commissioning of ABC (MAP 90%) type 6 kg confirm to IS:15683, with ISI marked / TAC approved fitted with required accessories including wall suspension brackets. MAKE - Safex / Minimax / Kanex

Providing, fixing AUTO GLOW photo luminescent Signage's as per IS standard in Block / Small Letters on rigid sheet with necessary wall or Ceiling fittings as Specified Sizes: a) Fire lift: size: 4" X 12" MAKE - Prolite / Mr.Lite

b) In case of Fire, do not use lift, use staircase: 8" x 8" MAKE - Prolite / Mr.Lite

c) Fire Exit: size: 4" X 12" MAKE - Prolite / Mr.Lite

d)Fire Equipment: size: 4" X 12" MAKE - Prolite / Mr.Lite

I) FIRE PUMPS & ACCESSORIES, INTERNAL HYDRANT, HOSE REEL & SPRINKLER SYSTEM Supply, Installation, Testing and Commissioning of Electric driven main fire pump suitable for automatic operation and consisting of following: complete in all respect as required. a) Horizontal, centrifugal, end suction pump to ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest outlet at specified flow of 2280 lpm at 70 m. head conforming to IS standards. b) Squirrel cage induction motor with suitable HP with synchronous speed 3000 RPM, Suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, Conforming to IS standards. c) Common Base plat for Pump and motor and coupling, coupling guard and other accessories as required for complete Installation of pump set. d) Suitable cement concrete foundation with cement concrete plaster complete with anti-vibration arrangement. (MAKE - LUBI / KIRLOSKAR / WILO OR EQ)

Supply, Installation, Testing and Commissioning of Diesel Engine driven fire pump (Standby Pump) suitable for automatic operation and consisting of following: complete in all respect as required. a) Horizontal, centrifugal, end suction pump to ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest outlet at specified flow of 2280 lpm at 70 m. head conforming to IS standards. b) Diesel Engine with suitable HP with synchronous speed 3000 RPM, with all required accessories. c) Common Base plat for Pump and motor and coupling, coupling guard and other accessories as required for complete Installation of pump set. d) Suitable cement concrete foundation with cement concrete plaster complete with anti-vibration arrangement. (MAKE - LUBI / KIRLOSKAR / WILO OR EQ)

Providing, Fixing, Testing and Commissioning of Electric driven pressurization pump suitable for automatic operation and consisting of following: complete in all respect as required. a) Horizontal Type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal and flow of 180 lpm at 70m.head conforming to IS standards. b) Squirrel cage induction motor with suitable HP with synchronous speed 3000 RPM, Suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, Conforming to IS standards. c) Common Base plat for Pump and motor and coupling, coupling guard and other accessories as required for complete installation of pump set. d) Suitable cement concrete foundation duly plastered with anti vibration pads.

Supply, Installation, Testing and Commissioning of 150 mm dia Pressure Gauge (for all pipes) of range 0 - 15 Kg / cm² conforming to IS - 3624 having bourdon tube of stainless steel 310 in cast aluminium, stove enameled, black, weather proof case with outer, screwed aluminium bezel and complete with necessary U-type stainless steel siphon tube and cock including providing suitably painted angle iron support to the tube etc.as per specification complete as required. MAKE - H. Guru / Fibig / General instrument

Supply, Installation, Testing and Commissioning of Pressure Switches for automation of fire pumps. Pressure switches shall be double pole single throw type suitable for single phase supply with diaphragm. Aluminum Enclosure with IP 66 protection as required. MAKE - Honeywell / Indfoss / Switzer

Supply, installation, testing and commissioning of Cast Iron Four Way Fire Brigade Inlet as per IS: 904 having 63 mm dia inlet with blank cap and chain with necessary fittings, flanges, nut bolts etc. (For Water tank) Swati / Winco / Newage

Supply, installation, testing and commissioning of Cast lron Two Way Fire Brigade Inlet as per IS: 904 having 63 mm dia inlet with blank cap and chain with necessary fittings, flanges, nut bolts etc. complete as required. (For Hydrant Network) Swati / Winco / Newage

Supply, Installation, Testing and commissioning of 63 mm dia instantaneous pattern SS short branch pipe, 20 mm dia nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling complete as required by the Local Fire Authority. MAKE - Swati / Winco / Newage

Supply, installation, testing and commissioning of First Aid Hose Reel equipment conforming to IS:884 comprising of hose reel drum, 8 mm shut off nozzle, Rubber hose reel tubing as per IS: 444 of 25 mm dia x 30 mtr. long, painting, Manual fix type with fixing bracket, anchor fastener, bolts & nuts etc. complete as required by Local Fire Authority MAKE - Swati / Winco / Newage

Supply, installation, testing and commissioning of SS Ball Valve. a) 25mm dia MAKE - Sant / Leader / Zoloto

Supply, Installation, Testing and Commissioning of Gun Metal Air Release Valve with necessary fittings. Size: 25 mm (For Riser) MAKE - Sant / Leader / Zoloto

Supply, Installation, Testing and commissioning of Flow Indicating Switch with fittings, Flanges, nut-bolts, washers etc. as per requirement. MAKE - Honeywell / System Sensor / Potter / Newage – Surendranagar

Supply, installation, testing and commissioning of Pump on/off Remote switches to each internal hydrant valve with required accessories. MAKE - C & S / L&T / equivalent

II) FIRE EXTINGUISHER AND SIGNAGES Supply, installation, testing and commissioning of Carbon Dioxide (Co2) type Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI marked / TAC approved fitted with required accessories including wall suspension brackets. MAKE - Safex / Minimax / Kanex

Supply, installation, testing and commissioning of ABC (MAP 90%) type 6 kg confirm to IS:15683, with ISI marked / TAC approved fitted with required accessories including wall suspension brackets. MAKE - Safex / Minimax / Kanex

Providing, fixing AUTO GLOW photo luminescent Signage's as per IS standard in Block / Small Letters on rigid sheet with necessary wall or Ceiling fittings as Specified Sizes: a) Fire lift: size: 4" X 12" MAKE - Prolite / Mr.Lite

b) In case of Fire, do not use lift, use staircase: 8" x 8" MAKE - Prolite / Mr.Lite

c) Fire Exit: size: 4" X 12" MAKE - Prolite / Mr.Lite

d)Fire Equipment: size: 4" X 12" MAKE - Prolite / Mr.Lite

M/s. Natvar Construction Co.

YOGI CONSTRUCTION Co.

SHANTI PROCON LLP

C E INFRA (INDIA)