Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.2 LAccepted-AOC AT SAMESHER NAGAR SINDRI ROAD JHARIA DIST DHANBAD 828111 | JHARIA | DHANBAD | JHARKHAND | 828111 | L1 | Accepted-AOC The bidder has been technically accepted and became L-1 | |
| 2 | L2₹11.4 L+₹20,996 (1.88%)Rejected-Finance | L2 | Rejected-Finance Rejected for being as L2. | |
| 3 | L3₹11.7 L+₹52,586 (4.72%)Rejected-Finance AT UPPER KULHI PO JHARIA DIST DHANBAD | DHANBAD | L3 | Rejected-Finance Rejected for being as L3. | |
| 4 | Rejected-Technical 5 E HEAVY INDUSTRIAL AREA HATHKHOJ BHILAI DURG CHHATTISGARH DURG CHHATTISGARH 490024 | DURG | CHHATTISGARH | 490024 | - | Rejected-Technical Not Admitted |
| Sl No | Description | Qty | Unit | SPACE ENGINEERING CO L1 | BRIGHT ENGG WORKS L3 | G BANERJEE AND CO. L2 |
|---|---|---|---|---|---|---|
| 1.00 | Repairing/Rewinding of 240 HP, 550V AC, 2900 RPM, Pullen make Submersible Pump & Motor set : Sl no-PP38881
1. Rewinding/Overhauling of 240 HP, 550V AC, 2900 RPM, Pullen make Submersible Motor:
MATERIAL COST:
i. Rewinding/Overhauling of 240 HP, 550V AC, 2900 RPM, Pullen make Submersible Motor:
a.Winding Wire 240HP, 2900 RPM - 01 Set
b.Oil sea Brush - 01 Set
c.Rubber ‘O’ Ring for thrust bearing - 01 Set
d.Oil Seal Rubber - 01 Set
e.“O” Ring for lower /Motor base (Rubber) - 01 Set
LABOUR COST :
MOTOR DISMANTLING REWINDING & FITTING OF SUBMERSIBLE MOTOR BOTH P-14 MOTOR
2.Repairing / Overhauling of 1000 GPM, 5 stage, 150m Head, Pullen make Submersible Pump:
MATERIAL COST:
a.Sand Deflector - 01 No
b.Bush for stage casing (Bronze) - 05 Nos
c.Rubber ring for NRV - 01 No
d.PUMP SHAFT ( FOR 5 STAGE ) - 01 N0
e.IMPELLER - 02 Nos
f.MIDDLE SLEEVE - 01 No
g.SLEEVE FOR DISCHARGE OUTLET - 01 No
h.BUSH FOR DISCHARE OUTLET - 01 No
LABOUR COST:
a.Dismantling, Repairing, Assembling/ Re-fitting of Submersible Pump
b.Repairing /Assembling /Fitting of said pump with above new Materials | 1 | SET | 3,11,565 ₹3,11,565 Lowest | 3,26,261 ₹3,26,261 | 3,17,443 ₹3,17,443 |
| 2.00 | Repairing/Rewinding of 240 HP, 550V AC, 2900 RPM, Pullen make Submersible Pump & Motor set : Sl no-PP38884
1. Repairing of Submersible Pump & Motor Set Sl no-PP38884:
1.1.Rewinding/Overhauling of 240 HP, 550V AC, 2900 RPM, Pullen make Submersible Motor:
MATERIAL COST:
a.Winding Wire 240HP, 2900 RPM - 01 Set
b.Bearing bush for upper (Bronze) - 01 Set
c.Bearing bush for lower (Bronze), Oil Seal Bush, P.C.D. Cup - 01 Set
d.STUD FOR CONNECTING PIECE - 08 Nos
e.Rubber ‘O’ Ring for thrust bearing - 01Set
f.SEGMENT FOR THRUST BEARING - 01No
g.COUNTER THRUST BEARING(PLATE) - 01 Set
h.Nylon Washer/Rubber Ring (12 No Pkt) , Mechanical Seal - 01 Set
LABOUR COST:
MOTOR DISMANTLING REWINDING & FITTING OF SUBMERSIBLE MOTOR BOTH P-14 MOTOR
2.Repairing / Overhauling of 1000 GPM, 5 stage, 150m Head, Pullen make Submersible Pump:
MATERIAL COST:
a.Neck ring ,Bush for stage casing (Bronze), Bush for DOL (bronze) - 05 Nos
b.BUSH FOR SUCTION CASE, Sand Deflector - 01 No
c.Impeller - 02 Nos, KEY FOR IMPELLER - 03 Nos
d.Suction Strainer, DRAIN PLUG - 01 No, NUT FOR STUD - 08 Nos
e.KEY FOR PUMP COUPLE, LOCK NUT, NUT FOR NRV SPINDLE, INSERT RING FOR NRV - 01 No
f.SLEEVE FOR DISCHARGE OUTLET, BUSH FOR STAGE CASING -01 No
LABOUR COST:
a.Dismantling, Repairing, Assembling/ Re-fitting of Submersible Pump
b.Repairing /Assembling /Fitting of said pump with above new Materials | 1 | SET | 4,33,768 ₹4,33,768 Lowest | 4,54,228 ₹4,54,228 | 4,41,952 ₹4,41,952 |
| 3.00 | Repairing/Rewinding of 240 HP, 550V AC, 2900 RPM, Pullen make Submersible Pump & Motor set : Sl no-PP37387
1. Rewinding/Overhauling of 240 HP, 550V AC, 2900 RPM, Pullen make Submersible Motor:
MATERIALS REQUIRED FOR REPAIR OF P-14 TYPE SUBMERSIBLE MOTOR:
a.Winding Wire 240HP 2900 RPM - 01Set
b.Oil Seal Bush - 01 Set
c.RUBBER "O" RING F'OR THRUST BEARING - 01 Set
d.STUD FOR CONNECTING PIECE - 08 Nos
e.Nylon Washer/Rubber Ring (12 No Pkt) - 01 set
f.Mechanical Seal - 01 No
LABOUR COST FOR MOTOR DISMANTLING REWINDING & FITTING OF SUBMERSIBLE MOTOR BOTH P-14 MOTOR:
a.Dismantling of the Submersible Motor, 240HP, 550V AC, 2900RPM
b.Rewinding & refitting with above new Materials of said Motor.
2. Repairing / Overhauling of 1000 GPM, 5 stage, 150m Head, Pullen make Submersible Pump:
MATERIAL COST:
a.Sand Deflector, BUSH FOR DISCHARE OUTLET, SLEEVE FOR DISCHARGE OUTLET - 01 No
b.STUD FOR STAGE CASING - 08 Nos
c.LOCK NUT - 01 No
LABOUR COST:
a.Dismantling, Repairing, Assembling/ Re-fitting of Submersible Pump
b.Repairing /Assembling /Fitting of said pump with above new Materials | 1 | SET | 2,78,567 ₹2,78,567 Lowest | 2,91,706 ₹2,91,706 | 2,83,822 ₹2,83,822 |
| 4.00 | Providing and making of straight through cable jointing kit with cast resin compound, with ferrules and other joining materials for 3x70 sqmm, 1.1kV grade cable.
MATERIAL COST for 01 No:
a.Supply of Straight through cable jointing kit with cast resin compound with ferrules for 3 X 70 sq. mm 1.1 KV grade cable - 01 Set
b.PVC Adhesive Tape, 18mmx0.125mmx7m - 02 no
c.Thermal Insulation rubber - 0.3 Kg
d.Class A Insulation tape, 25mmx10m size - 1 No
e.PVC Pipe for giving mould, 75mm dia - 0.50 m
LABOUR COST:
a. For 01 no joint | 7 | Nos | 5,884 ₹41,188 Lowest | 6,161 ₹43,127 | 5,995 ₹41,965 |
| 5.00 | Supply of MS nuts & Bolts (3/4" x 3") | 100 | Kg | 127 ₹12,700 Lowest | 133 ₹13,300 | 129 ₹12,900 |
| 6.00 | Supply of HT Nut & Bolt With washer, Size: M33 x 100MM | 36 | Nos | 901 ₹32,436 Lowest | 943 ₹33,948 | 918 ₹33,048 |
| 7.00 | Supplying & Fixing of Copper Lugs, size: 70sqmm
MATERIAL COST for 06 Nos:
a.Supply of Copper lugs 70 sq. mm - 06 Nos
LABOUR COST:
a.For 01 no joint | 30 | Nos | 166 ₹4,980 Lowest | 174 ₹5,220 | 169 ₹5,070 |
| 8.00 | Total impact of GST for the purpose of CTC | 1 | no | - | - | - |
Tender Value
₹12.4 L
EMD Value
₹15,600
Closing Date
28 Jul 2025, 5:00 pmClosed
B.D. BEHERA, STAFF OFFICER (EnM),TA
STAFF OFFICER (E AND M), OFFICE OF THE GENERAL MANAGER, MCL, TALCHER AREA, P.O. - DERA COLLIERY, DIST- ANGUL (ODISHA), PIN - 759103 MAHANADI COALFIELDS LIMITED, TALCHER AREA
Repairing/Rewinding of 03 Nos. of Submersible Pump and Motor Sets (Sl.No. PP38881, PP38884 and PP37387) of Talcher Colliery and Handidhua Colliery.
2025_MCL_340015_1
GM(TA)/SO(EnM)/e-11, dtd.21.07.2025
Open Tender
Electrical and Maintenance Works
Item Rate
30 days
Talcher and Handidhua Colliery
Repairing/Rewinding of 03 Nos. of Submersible Pump and Motor Sets (Sl.No. PP38881, PP38884, PP37387) of Talcher Colliery and Handidhua Colliery.
4 documents required · 4 mandatory
₹15,600
7 Oct 2025
22 Jul 2025
29 Jul 2025
22 Jul 2025
28 Jul 2025
22 Jul 2025
22 Jul 2025 - 24 Jul 2025
Amount
Repairing/Rewinding of 240 HP, 550V AC, 2900 RPM, Pullen make Submersible Pump & Motor set : Sl no-PP38881 1. Rewinding/Overhauling of 240 HP, 550V AC, 2900 RPM, Pullen make Submersible Motor: MATERIAL COST: i. Rewinding/Overhauling of 240 HP, 550V AC, 2900 RPM, Pullen make Submersible Motor: a.Winding Wire 240HP, 2900 RPM - 01 Set b.Oil sea Brush - 01 Set c.Rubber ‘O’ Ring for thrust bearing - 01 Set d.Oil Seal Rubber - 01 Set e.“O” Ring for lower /Motor base (Rubber) - 01 Set LABOUR COST : MOTOR DISMANTLING REWINDING & FITTING OF SUBMERSIBLE MOTOR BOTH P-14 MOTOR 2.Repairing / Overhauling of 1000 GPM, 5 stage, 150m Head, Pullen make Submersible Pump: MATERIAL COST: a.Sand Deflector - 01 No b.Bush for stage casing (Bronze) - 05 Nos c.Rubber ring for NRV - 01 No d.PUMP SHAFT ( FOR 5 STAGE ) - 01 N0 e.IMPELLER - 02 Nos f.MIDDLE SLEEVE - 01 No g.SLEEVE FOR DISCHARGE OUTLET - 01 No h.BUSH FOR DISCHARE OUTLET - 01 No LABOUR COST: a.Dismantling, Repairing, Assembling/ Re-fitting of Submersible Pump b.Repairing /Assembling /Fitting of said pump with above new Materials
Repairing/Rewinding of 240 HP, 550V AC, 2900 RPM, Pullen make Submersible Pump & Motor set : Sl no-PP38884 1. Repairing of Submersible Pump & Motor Set Sl no-PP38884: 1.1.Rewinding/Overhauling of 240 HP, 550V AC, 2900 RPM, Pullen make Submersible Motor: MATERIAL COST: a.Winding Wire 240HP, 2900 RPM - 01 Set b.Bearing bush for upper (Bronze) - 01 Set c.Bearing bush for lower (Bronze), Oil Seal Bush, P.C.D. Cup - 01 Set d.STUD FOR CONNECTING PIECE - 08 Nos e.Rubber ‘O’ Ring for thrust bearing - 01Set f.SEGMENT FOR THRUST BEARING - 01No g.COUNTER THRUST BEARING(PLATE) - 01 Set h.Nylon Washer/Rubber Ring (12 No Pkt) , Mechanical Seal - 01 Set LABOUR COST: MOTOR DISMANTLING REWINDING & FITTING OF SUBMERSIBLE MOTOR BOTH P-14 MOTOR 2.Repairing / Overhauling of 1000 GPM, 5 stage, 150m Head, Pullen make Submersible Pump: MATERIAL COST: a.Neck ring ,Bush for stage casing (Bronze), Bush for DOL (bronze) - 05 Nos b.BUSH FOR SUCTION CASE, Sand Deflector - 01 No c.Impeller - 02 Nos, KEY FOR IMPELLER - 03 Nos d.Suction Strainer, DRAIN PLUG - 01 No, NUT FOR STUD - 08 Nos e.KEY FOR PUMP COUPLE, LOCK NUT, NUT FOR NRV SPINDLE, INSERT RING FOR NRV - 01 No f.SLEEVE FOR DISCHARGE OUTLET, BUSH FOR STAGE CASING -01 No LABOUR COST: a.Dismantling, Repairing, Assembling/ Re-fitting of Submersible Pump b.Repairing /Assembling /Fitting of said pump with above new Materials
Repairing/Rewinding of 240 HP, 550V AC, 2900 RPM, Pullen make Submersible Pump & Motor set : Sl no-PP37387 1. Rewinding/Overhauling of 240 HP, 550V AC, 2900 RPM, Pullen make Submersible Motor: MATERIALS REQUIRED FOR REPAIR OF P-14 TYPE SUBMERSIBLE MOTOR: a.Winding Wire 240HP 2900 RPM - 01Set b.Oil Seal Bush - 01 Set c.RUBBER "O" RING F'OR THRUST BEARING - 01 Set d.STUD FOR CONNECTING PIECE - 08 Nos e.Nylon Washer/Rubber Ring (12 No Pkt) - 01 set f.Mechanical Seal - 01 No LABOUR COST FOR MOTOR DISMANTLING REWINDING & FITTING OF SUBMERSIBLE MOTOR BOTH P-14 MOTOR: a.Dismantling of the Submersible Motor, 240HP, 550V AC, 2900RPM b.Rewinding & refitting with above new Materials of said Motor. 2. Repairing / Overhauling of 1000 GPM, 5 stage, 150m Head, Pullen make Submersible Pump: MATERIAL COST: a.Sand Deflector, BUSH FOR DISCHARE OUTLET, SLEEVE FOR DISCHARGE OUTLET - 01 No b.STUD FOR STAGE CASING - 08 Nos c.LOCK NUT - 01 No LABOUR COST: a.Dismantling, Repairing, Assembling/ Re-fitting of Submersible Pump b.Repairing /Assembling /Fitting of said pump with above new Materials
Providing and making of straight through cable jointing kit with cast resin compound, with ferrules and other joining materials for 3x70 sqmm, 1.1kV grade cable. MATERIAL COST for 01 No: a.Supply of Straight through cable jointing kit with cast resin compound with ferrules for 3 X 70 sq. mm 1.1 KV grade cable - 01 Set b.PVC Adhesive Tape, 18mmx0.125mmx7m - 02 no c.Thermal Insulation rubber - 0.3 Kg d.Class A Insulation tape, 25mmx10m size - 1 No e.PVC Pipe for giving mould, 75mm dia - 0.50 m LABOUR COST: a. For 01 no joint
Supply of MS nuts & Bolts (3/4" x 3")
Supply of HT Nut & Bolt With washer, Size: M33 x 100MM
Supplying & Fixing of Copper Lugs, size: 70sqmm MATERIAL COST for 06 Nos: a.Supply of Copper lugs 70 sq. mm - 06 Nos LABOUR COST: a.For 01 no joint
Total impact of GST for the purpose of CTC
G BANERJEE AND CO. (BID ID -1170519)
BRIGHT ENGG WORKS (BID ID -1170510)
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .