SPL REPAIR TO BLDG NO P52/01 TO 52/04 OF GOVT MD ACCN AND BLDG NO T16 OF 151 INF BN TA AT MUZAFFARPUR UNDER GE DANAPUR CANTT

Amount

Dismantling of floor, walls tiles incl bedding but backing and rubbish off permises all as specified.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm but not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm as in skirting etc set & jointed in neat cement slurry and pointed with white or coloured cement to match complete.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete.

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 for laying of floor tiles as directed.

M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete.

M&L for Coloured glazed ceramic tiles (450 x 300)x 6 to 7mm thick (digital type) on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or colored cement to match complete including 10 mm thick rendering on fair faces of brick work or concrete surfaces, in cement mortar 1:4 all as specified and directed for shade, pattern and laying of tiles complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed.

M & L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below and above ground level) complete all as specified and directed.

M&L for screed bed of bedding layer of cement mortar (1:4) 20 mm thick for laying floors finishes complete all as specified and directed.

M&L chequred cement concrete tiles 20cm x20cm 25mm thick for laying floors finishes set joint & painted with grey cement slurry mixed with pigment to match the shade of slab/tiles complete all as specified and directed.

M&L PCC 1:4:8 type-D2 (40mm graded stone aggregate) as in foundations, filling and mass concrete.sub base as in floors finished even & fair complete all as specified and directed..

M & L for plain cement concrete M-15 Nominal Mix 1:2:4 type B-1 (using 20 mm graded stone aggregate), as in lintels upto 1.5 m clear span, cills, steps,seismic and other similar bands, plinth course, string courses, lacinng courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, hold fast water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M & L for 20 - 25 mm thick machine cut cudappa stone slab as in floor laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including necessary cutting, grinding, rubbing, polishing rounding to exposed edges complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M & L for Rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.

M & L for 5 mm thick rendering on fair faces of brick /concrete surfaces of ceiling / chajja in CM (1:3), finished even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound (liquid), ISI marked.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

All as per above item No 22.00 but exc 1.5 Sqm but n.exc. 4 Sqm each complete all as specified and directed.

S & F factory made 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I all as specified and directed.

S & F for Flush shutters 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S & F steel windows with side hung shutter incl box type butt hinges with bow handle,steel peg stay, tower bolts ( each shutter having two tower bolts 100mm long with glazing bars incl dovetailed or welded complete all as specified and as directed.

~Ditto~ all as per item No 26.00 above but without glazing bars complete as specified and as directed.

S & F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing with and including, fixing of hold fast size 25 x 5 mm of flat iron etc and over including one coat of primer complete all as specified and directed.

S & F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165. complete all as specified and directed.

S & F pressed steel frame of size 105mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast hinges, lock strike plates etc., complete all as specified and directed.

S & F pressed steel frame of size 125mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hold fast hinges, lock strike plates etc., complete all as specified and directed.

S & F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specifed and directed.

S & F 28 to 30 mm(stiles) Factory Made Solid PVC Moulded door shutter & kitchen cupboard shutter with particle board core , with 2, 3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, in frame at site as per specification & drawings as given in SSR part - II (2020 print) complete all as specified and directed.

SS&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S & F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300mm long complete all as specified and directed.

S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.

S&F 200mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F Aluminium handle, cast type anodised 200 mm size ISI marked

S&F 100mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F Aluminium handles, cast type, anodized 150 mm size comp ISI Marked complete all as specified and directed

S&F Aluminium handles, cast type, anodized 100 mm size comp ISI Marked complete all as specified and directed

S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor complete as directed by Engr-in-charge

S&F small fitings of 2nd class hard wood door, window stops and the like not exc 200 cucm each including MS butt hinges 50mm medium weight, cold rolled 50mm long all as spd.

S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

S & F of 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed..

~Ditto~ all as per Srl item No 46.00 above but figured glass. complete all as specified and directed

S& F in repair 18/19 mm thick Prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F 100 mm dia extruded brass handle, fabricated type polished fixed to board complete all as specified and directed.

S&F MS Peg set of six powder coated as approved by GE

S&F in repair mild steel conduit curtain rod with PVC coating fancy type curten rod 20 mm dia of any colour as approved complete.

S&F mild steel Bracket with PVC coating fancy type for curten rod 20 mm dia of any colour as approved complete.

Taking up or down steel tubing and connections 15 mm bore GI tubing complete all as specifed and directed.

Taking up or down steel tubing and connections 20 mm bore GI tubing complete all as specifed and directed.

Supply & laying of CPVC pipes 16 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete.

Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting not exc. 10 cm in girth complete all as specified and directed

S&F in repair cast copper alloy chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses complete all as specified & directed

S&F in repair vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete.

S&F in repair vitreous china squating pan 'Orissa' pattern WC size 580x440 mm white with integral foot rest and trap and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor all as spd.

S&F in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection with CP brass nuts on both sides complete all as specified and directed.

S&F in repair chromium plated health faucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete all as specified and directed.

S&F in repairs PVC connection 15mm dia size and 450 mm long with 2 Nos brass check nuts its washers complete all as specified and as directed.

S&F in repair bib tap 15mm bore cast copper alloy chromium plated long body with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

S&F in repair 15 mm bore pillar tap cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed.

S&F in repair brass CP tubular towel rail 20 mm dia "D" type 60 cm long between flangecomplete all as specified and directed

S & F as in repair 15 mm dia angle cock, chromium plated, cast copper alloy, fancy type, screwed down high pressure with capstan head screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair CP two way angle valve cast copper alloy chromium plated with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete.

S&F in repair of stainless steel soap dish, of standerd size and shape complete all as directed

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, & waste pipe incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm complete.

S & F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900x750x220 mm size fixing with wooden plug with suitable size of screws complete all as specifiedand directed.

S & F in repair brass chromium plated shower rose fancy type with swivel joints ,125 mm dia with CP arms 300 mm long including fixing to steel pipe or union complete all as specifiedand directed.

S&F PVC (SWR) 'P' trap for 110 mm dia etc complete all as specifiedand directed..

S&F in repair chromium plated toilet paper holder with flap complete all as specified and directed..

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc

M&L for RCC as in kitchen platform, shelves & chajjas etc type B1 1:2:4 (20 mm graded stone aggregate) incl necessary form work complete all as specified and directed .

S&F MS TMT bars, 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoopinbg for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Taking down PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor or trenches of 110 mm dia complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor or trenches of 75 mm dia complete all as specified and directed.

S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete.

S & F PVC (SWR) bends any radius of 110 mm dia complete all as specified and directed.

S & F PVC (SWR) bends any radius of 110 mm dia provided with access door complete all as specified and directed.

M & L PVC(SWR) Tee of 110 mm dia etc complete all as specified and directed.

S&F PVC (SWR) bends provided with access door of 75 mm dia complete all as specified and directed.

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed.

~Ditto~ all as per item Srl No. 88.00 above but 75mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete

Dismantling water tanks of capacity exc 500 and n exc 1000 ltrs complete all as specified and complete all as specified and directed..

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity including CP tank nipple complete all as specified and directed.

S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete.

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceiling and applying 2mm thick wall care putty including preparation of new surface complete.

M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying two coat of Oil Bound Distemper of any light shade complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as specified and directed.

M&L preparation new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat primer complete all as specified and directed

M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed.

Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified.(IWPC will be paid separately)

Roughing surface of old concrete by picking, sweeping, cleaning & washing down with water to remove dust etc. complete

M & L for brushing neat cement slurry at the rate of 3 Kg per Sqm complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (Using 12.50 mm graded stone aggregate) in roof padding/kerbs/sunken slab etc complete all as spd and directed,

M&L 10 mm thick screed bedding on roof surfaces/concrete surface in CM 1:4 complete.

M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coat surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. NOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed.

Precast PCC plain factory made tiles, ISI marked, 22 mm thick of size 250 mm x 250 mm, fabricated using grey cement & no pigments. on 15 mm thick cement mortar (1:3) bedding and joints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound over roof surfaces complete all as specified.

M&L for Two coats of elastomeric cementatious coating Pidifin 2k of pidilite or equivalent in fosroc, sika, STP on exposed brick surface after complete removal of old plaster surface complete all as per manufacturer instructions and as directed.

M&L Prepration of new plastered surfaces of wall and applying three coats of white wash

M/L 35 mm thick factory made (batten thickness) Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm thick BWP Commercial ply or 12 mm thick vineered particle board with commercial veneering on both faces and the size of memebers of shutter are as per IS: 1003(Part - 1), complete as directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Treatment of soil under existing floors using emulsion @ one ltr per hole , 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 ( 1 cement : 2 coarse sand ) to match the existing floors complete.

Along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 ltr per linear meter including drilling and plugging holes etc in apron.

M & L for plain cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregate), as in back filling of pressed steel frames and similar workd including necessary form work as required complete.

M&L for sand filling under floors or in foundations, laid in layers n exc 15 cm thick, spread levelled including watering and consolidation complete all as specified and directed

M&L for hard core of broken bricks of gauge not exc 63 mm deposited spread and leveled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate), as in floor finished even & fair complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate), 50 mm thick as in floor finished even & smooth as directed by Engr-in-Charge.

M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3.

M&L for machine cut kota stone slab flooring 20-25mm thick over 20mm cement screed base(1:6) laid and jointed with cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for machine cut kota stone slab flooring 20-25mm thick in riser of steps, skirting, dado etc laid over 15mm cement plaster (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete.

Dismantling of Plain or corrugated steel sheeting any, gauge , thickness, including nainital or similar pattern roof coverings

M&L Pre painted galvalume sheet aluminium zinc coating GI based corrugated steel sheet with curved type 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /ridge/cladding to wall fixed with self tapping screws as specified.

Dismantlingof fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in sectio

M&L for Mild Steel Roof Trusses (framed trussed purlins ,crane gantries , rails and fastenings and heavy brackets framing (beam tee, angle ,channel or flat sections) or tubular structural steel including distance piece ,cleats etc.e all as specified & directed.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending spirally for hopping for columns, hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9 mm dia or securing with clips complete all as directed by EIC.

Use & Waste form work to rough finished flat surfaces as in sides and soffits of beams, lintels, coping etc complete.

Excavation in trenches in soft/loose soil n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, pier holes etc n exc 10 sqm on plan and getting out complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil

Removing excavated material exc. 50m but n exc 250m and depositing where directed at a level n.exc. 1.5 m above the starting point.

Taking down carefully copper/aluminium point wiring (light, fan, switch, socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose, sketch light fittings etc, and making good the disturbed surface of walls and floors etc as directed.

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls as directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls as directed.

M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including 1.6mm thick anodised pressed steel sunken box covered with 3mm thick hylum sheet for mounting switches, sockets, fan regulators etc for the following complete all as specified and directed.

One light point/fan point/ bell point controlled by one switch.

One three pin socket outlet 5 Amps on same board complete.

One 5 Amps socket out let point on independent board controlled by one switch.

All as per item no - 141 here in before but using pvc insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 1.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch.

Supply and fix switch piano flush button single pole one way 5 amps, 230 Volts complete as directed.

Supply and fix socket outlet flush type 5 Amps, 5 pin, 230 Volts complete as directed.

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete as directed.

S & F for Switch Piano type single pole 15 amp, 230 Volts complete all as specified and directed at site.

Supply and fix Ceiling rose surface bakelite 63.5mm dia three terminal, fixied in repairs complete.

Supply & fixing for electronic Fan regulator 450 watt .

Supply and fixing in repair bell multi music type AC 240 Volts, single pole complete all as specified and directed.

Supply and fixing batten / angular fittings complete all as spd & directed.

Supply and fixing of 9 watt LED bulb complete all as spd & directed

Supply and fixing LED tube rod 18 watt 230 volt T 8 type made up of polycarbonate with in built electric electronic driver both sided connection with metal heat sink complete fixed with wall/ceiling incl tube rod fitting accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size complete all as specified & directed. Make- Havells, Cat No CRYSTAL1213T8DSTL18WLED865SGLASS or equivalent model of Bjaj/philips/Crompton.

M & L for Rigid non metallic PVC conduit ISI marked, medium grade, inclusive of all fitting such as tees, bends. Juction boxes, elbows saddles. Pipe hooks, couples and lock outs etc 25 mm external dia, fixed on surface mounted complete and making good disturbed surfaces in repairs all as directed.

S&F LED tube light batten box type with decorative end caps suitable single tube 1 x 18/20 watt T8 lamps type complete with both end bi-pin holder including tube rod LED 18/20 watt and all accessories internally prewired and fixed to wall/ceiling incl fitting accessories and connectiong with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make - Crompton Greaves ,Model No : DMLN1LT8-16 or equivalent model of Bajaj/Surya/Havells

Supply and fix double door SPN DBs 8 way, 240 volt with 200 Amp rated bus bar SPN of powder coated DB's suitable for housing MCB's/Isolater, Neutral link, Earth bar and Din ral complete.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 2.5 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete.

S&F in repair with MCB SP 240 volts 5 to 40 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete. Make-HPL / Indo Asian / ABB.

S & F in repair with MCB SPN 5 to 40 amps 10 KA, 'C' series including connection with suitable size aluminium / copper lugs complete . Make-HPL / Indo Asian / ABB.

S&F in repair of Earthing to panel with galvanised steel earth plate electrode 600mm X 600 mm X6mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 of MES Shedule pt 2009 GI earth lead strip protected by GI pipe 40mm dia light grade and connected and connected to earth test point including excavation in any type of soil , returning filling , disposal of soil , providing charcoal dust and common salt upto top edge of earth plate , construction of PCC pit with RCC cover , funnel ,watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete.

M/s Mukesh and company

M/S Priya Trading Agency

M/S ANAND MOHAN ENTERPRISES

M/s Naresh Chand Agrawal

M/S SAROJ KUMAR SINGH

M/S MODERN CONSTRUCTION

jaglalchoudharyandsons

MANISH KUMAR

HARINANDAN RAI SONS

SINHA CONSTRUCTION