8419 REPAIRS/ REPLACEMENT OF GALVALUME SHEET ROOFING MANGLORE TILES/ AC SHEETS INCLUDING BOARD FALSE CEILING JOINERIES AND ALLIED WORKS IN ELLIOT LINES AND ZOJILA LINES UNDER AGE B/RII AT GE (CENTRAL) PUNE

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing etc complete all as specified and directed.

Dismantling battens for tiles, shingles etc of any size including tilting fillets, spacing exc 15cm complete all as specified and directed..

M & L 2nd class hard wood battens for tiles , shingles etc clean sawn at 30 cm centres, sectional area exceeding 5 Sqcm but not exceeding 15 Sqcm incluing tiling fillets fixed with nails complete all as specified and directed.

Fixing only battern of any sectional area all as directed. Note :- Old battern obtained from dismantling shall be reused..

S & F Roof tiles, mangalore pattern, interlocking at side joints, laid dry in roofing etc complete all as specified and directed.

Fixing only Roof tiles, mangalore pattern, interlocking at side joints, laid dry in roofing complete all as specified and directed. Note :- Old tiles obtained from dismantling shall be reused..

S & F Ridge or hip tiles class ‘AA’ to suit mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed .

All as per item No 7 above except Ridge or hip tile complete all as specified and directed . Note :- Old tiles obtained from dismantling shall be reused..

Dismantling of AC sheet corrugated or semi corrugated in roof covering complete all as directed .

M & L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofs, walls etc complete all as specified.

M & L for 6mm thick asbestos cement two piece adjustable plain wing ridge fixed with L-type or J-type or cranked hook bolts complete all as specified.

S & F Prepainted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, bent to shape as required and directed fixed with self tapping screws complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness in roof coverimng complete all as specified and directed.

M & L for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' type or 'J' type or cranked hook bolts and washers in roofs, walls etc with grade of zine coating 275 etc complete all as specified.

All as per item No 17 above but except sheet all as directed. Note : Old serviceable sheets obtained from dismantling shall be reused.

M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) grade D-5 and setting in CM 1:6 including dismantling of brick or stone / boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed.

M & L PCC 1:3:6 type B-1 using 20mm graded stone aggregate as in roof kerbs , rounded or chamfered on edges including use and waste of necessary form work complete all as specified.

S & F 5mm thick 2nd class hardwood, clean sawn boards or planks width not exc 25cm including fixing at required height with nails or other means and providing decorative / intricate work where directed taking down old eve board complete allas directed.

Dismantling of boarding, any description fixed in any position with nails in cupboard shutters, partitions, false ceiling and wall lining etc and similar position fixed with screws complete all as directed .

S & F aluminium powder coated snap grid framed work of size 600mm x 600mm for false ceiling and including suspended hangers 6mm dia G.I (upto 1200mm long) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40 x 3mm of size 60mm long and expansion hold fastener 12.5mm dia 40mm long with including 12mm thick seamless calcium silicate ceiling made out of 1800 x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre complete with following aluminium anodised sections :- (a) Main and cross Tee shall be of size 36.5mm x 23.5mm x 1.5mm thick and 23.5mm x 23.5mm x 1.28mm thick respectively and jointed at junction/crossing with aluminium anodised angle bracket of size 15mm x 15mm x 1.5mm thick weighing 0.12 Kg/RM fixed with suitable M.S bolt, Nuts & washers as per manufaturere's insructions . (b) The snap grid (Main / Cross Tee) section shall be suported at the end along the wall with aluminium anodised angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg/RM. (c) PVC protcted sheeting shall be used to avoid scraches, damages to frame work while fixing to ceiling.

M & L for MS structural steel work as in framed trusses, purlins, rafter, post , crane grantries, rails and fastening and heavy bracket framing etc including distance pieces , cleats, wind ties etc (Beam, Tee, Angle, Channel or Flat section) incliding shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plate, gusset plate and also erecting in true position conforming to grade Fe-410W (Grade E-250, quality A) complete all as specified and as directed.

Taking down shutter of any description and removing from site exc. 1.00 Sqm & not exc. 2.00 Sqm & removing from site all as directed.

Taking down Shutters of any description area not exc 1.00 Sqm each and refixing in the same opening after carrying out necessary Resecuring or easing & adjusting / minor repairs etc all as specified and as directed.

Taking down Shutters of any description area exc 1.00 Sqm but not exc 2.00 Sqm each and refixing in the same opening after carrying out necessary Resecuring or easing & adjusting / minor repairs etc all as specified and as directed.

Taking down chowkats or frames with shutters (w/o taking off shutter from the frame) area not exc 1.50 Sqm each & removing from site all as directed.

Taking down chowkats or frames with shutters (w/o taking off shutter from the frame) area exc 1.50 Sqm but not exc 4.00 Sqm each & removing from site all as directed.

S & F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed..

All as per as item No 29 above but 105 x 60mm all as specified and directed..

M & L for Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate for filling of pressed steel frame and hold fast block cutting etc complete all as specified and directed..

S & F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed..

S & F 30mm thick flush shutters, solid core onstruction, with block board core and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

Supply and fix 35mm thick 2nd class hard wood factory made glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed.

S & F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solvent cement complete all as shown in drg given on page 176 of SSR 2020 Part-II The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part II. Each PVC door shutter leaf consist of 4 Nos 100mm long MS butt hinges complete all as specified and directed.

S & F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19mm x 19mm MS square tube having wall thickness 19 gauge complete all as shown in sketch on page 180 of SSR 2020 Part-II complete all as specified and directed.

Dismantling aluminium section any description complete all as specified and directed.

S & F anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S & F Powder coated aluminium door shutters, (single / double leaf) aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminum snap beading , screws etc. complete all as specified. (Note :- Glass pane shall be measured and paid sepertely under relevant item)

S & F three track sliding window with two or more shutter with including 5mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. Note :- The cost of glass & stainless steel wire cloth shall deemed to be included in quoted rates.

S & F fixed glass ventilators with using 4mm thick plain glass with including following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make including rubber beading etc complete all as specified and as directed. (a) SP - 20048 (b) Glazing clips - 19352.

Supply and fix stainless steel wire 0.71mm nominal dia fixed with tinned tacks average width of aperture 1.18mm complete all as specified and as directed. .

S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S & F in repair Door closer (Aluminium extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S & F 100mm brass mortice lock, vertical type, four lever complete all as specified and directed.

S & F 150mm extruded aluminium alloy powder coated handles , fabricated type complete all as specified and directed..

S & F 150mm long aluminium alloy powder coated barrel tower bolt of extruded section complete all as specified and directed.

S & F 100mm Mild steel butt hinges medium weight , cold rolled complete all as specified and directed .

Supply and fix 150mm floor door stopper of aluminium body and tongue anodised with hard drawn steel spring fixed in floor over all length of cover plate complete all as specified and as directed.

S & F in repair aluminium anodised powder coated curtain rails 25mm dia with alu powder coated brakcet, knobs, rings @ 10cm c/c etc complete all as specified.

Supply and fix decorative type brackets , stainless steel, suitable for above curtain rod complete all as specified and directed.

Supply and fix in repair 300mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified and directed..

Supply and fix in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width ofaperture 1.18mm complete all as specified and directed.

Supply and fix in repair 3mm thick sheet glass ordinary quality and glazing with oil putty and atleast 06 Nos MS glazing clips per window pane fixed with steel window frames all as specified and directed..

Supply & fix 250mm long aluminium alloy powder coated sliding door bolts with hasp and stapple (bolt type) and fxing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S & F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc complete all as specified and directed.

M & L preparation of new or previously untreated steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer complete all as specified and directed..

M & L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for 25mm bore dia GI tubing medium grade including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls, ceilings or laid in floors including taking up or down old steel water tubing and connections complete all as specified and directed.

S & F 500 Litres capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling existing water tanks complete all as specified and directed.

S & F 1000 Litres capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling existing water tanks complete all as specified and directed.

S & F in repair 20mm bore ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

S & F in repair 20mm dia gun metal, globe or gate valves ISI marked with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repairs 15mm bore dia bib taps , cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as directed and specified.

S & F in repairs 15mm angle cock , chromium plated , fancy type cast copper alloy with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repair vitreous China wash down water closet (pedestal pattern), white with including cast iron 'P' or 'S' trap and connection to trap , fixing bolts, seat cover and jet spray etc (excluding flushing cistern and flush pipe) complete connected to drain and including making good to floor, complete all as specified and directed.

S & F in repair vitreous china squatting pan "ORISSA" pattern size 580mm x 440 mm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap (but excluding flushing cistern and flush pipe) includintg cement concrete bedding if required and including making good to floor, complete all as specified

S & F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

S & F in repairs 15mm dia PVC connections with PTMT nuts , length 450mm all as specified and directed.

Material and labour for Non skid coloured ceramic tiles of size 300mm x 300mm x 7 to 8mm thick (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.

M & L for coloured glazed ceramic tiles of size 450 x 300 x 7 to 8mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat of CM 1:4 complete all as specified.

M & L for preparation of old wooden surfaces and applying one coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Complete removal of existing treatment of walls (any number of layers) by scrapping with manual / mechanical means and applying two coats of oil bound distemper over one coat of alkali resistance primer complete all as specified and as directed.

M & L for preparation of old plastered or unplastered surfaces of walls by brooming / wire brushing , removal of loose scale / dust / unwanted particles by manual / mechanical means and applying one coat of cement base paint complete all as specified and directed.

Dismantling timber scantlings 40Sqcm and over in cross section, in any position of framed work complete all as specified and directed.

M & L for 5mm thick and 35mm width PVC sheet fillets for wall panelling inclusive of fixing on to wall to make PVC frame all as shown and specified in SSR Part-II 2020 complete as directed.

M & L for 5mm thick wood grain printed solid PVC wall lining consisting of PVC sheet fixed with inclusive of solvent cement on PVC frame as shown and specified in SSR Part-II 2020 complete as directed.

M/S NAVNEET S MORDE

Gauri Associates

S M MISHRA

Santosh Pandurang Pise

Agarwal Agencies

L.T Associate

Parhar Enterprise