Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.0 LAccepted-AOC | L1 | Accepted-AOC work allotted | |
| 2 | L2₹2.3 L+₹28,187 (13.8%)Rejected-Finance 498 JARNALLY KOTHI OPP PARVEEN HOSPITAL KARNAL | KARNAL | KARNAL | HARYANA | L2 | Rejected-Finance L2 |
Tender Value
₹1.9 L
EMD Value
₹3,720
Closing Date
3 Nov 2021, 2:00 pmClosed
Executive Engineer
Executive Engineer, Elect. Division PWD BandR Br., Karnal (0184-2265696)
Pdg. Special repair of various PHC and CHC at village Habri, Rasina, Pai and Karora Distt. Kaithal (Pdg. EI only) Recall
2021_HRY_191833_2
Habri, Rasina, Pai and Karora
Open Tender
Electrical Works
Works
60 days
Kaithal
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
₹3,720
23 Feb 2022
21 Oct 2021
3 Nov 2021
21 Oct 2021
3 Nov 2021
21 Oct 2021
Amount
23.5.1.2 COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS Wiring only in 1.5 sqmm PVC insulated copper conductor cable for LIGHT/FAN/Call bell point in existing conduit pipe and MS boxes including cost of Bakelite cover for MS box, switch, wall socket, ceiling rose/connector etc. Group B
23.5.4.2 Wiring in existing conduit and MS box for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin socket and 1 no 5/6 Amp switch etc complete as required Group B
23.5.5.2 Wiring in existing conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch etc complete as required Group B
23.5.6.3 Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 4 Sqmm(1/2.24mm)
23.5.6.6 2 run of Size 1.50 Sqmm(1/1.40mm)
23.7.6.2 Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia.
23.8.1.1 Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Switch 5 amp. on existing sheet.
23.8.1.2 Wall socket 5 amp on existing sheet.
23.8.1.3 15 amp. switch on existing sheet.
23.8.1.6 Call bell 220/230 volts musical type
23.8.1.12 Bakelite angle/straight button holder large size.
23.8.1.13 Socket size rotary step type Electronic regulator for A.C. ceiling fan
23.8.2.1 Supply and Fixing Bakelite sheet on existing MS/GI/wooden/PVC box etc including fixing with brass screws and washers. 5 mm thick
23.8.2.2 3 mm thick
23.9 Erection of exhaust fan in existing opening ,complete with necessary earthling of fan including carriage from PWD store to the site of work.
23.10 Erection of cabin fan complete with necessary earthling including carriage from PWD store to the site of work.
23.17.1 Replacement of a fan condenser complete with connections and testing etc. 2 to 3.5 mfd.
23.19.2 Painting of pole with brackets etc with 2 coats of enamelled paint or other approved paint. Above 5 metres but up to the height of 8 metres
23.20 Fixing of LED Tube light/ 2*2 ft square panel fitting directly on wall /ceiling or false ceiling including making connections etc as required.
23.22.1.9 Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp
23.22.2.1 MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 125 A FP
23.22.3.3 Supply and erection of sheet steel enclosures 1pole/ 2 pole/4 pole including providing SP/DP/TP/FP MCB on wall/on existing pedestal complete with necessary connections etc, :- TPN enclosure suitable for TP,TPN or FPMCB
23.22.4.5 Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 4 way ( 8 incoming and 3phase*4 outgoing)
23.22.5.1 Supply and erection of miniature circuit Breaker/isolator 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole
23.22.5.7 6 amp. to 32 amp MCB's FOUR POLE
23.22.7 Supply and erection of blanking sheet in existing distribution board.
24.1.1 Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.
24.1.2 Extra for using salt and char coal/coke for pipe earth electrode as required.
24.1.14 Supply and erection of 20mm x 3 mm thick GI, tape fixed with suitable G.I. stapples of same size.
24.4.2.3 Supply and erection of GI bracket made of 32 mm dia medium class GI pipe, having 15 deg angle from horizontal, suitable for fixing on top of Street Light pole 120 cm long, with 30 cm high suitable size pole cap
24.4.3 Supply and erection of 32mm dia metre 1.5 m long bracket (B-class) making an angle of 10° to 15° with horizontal plane for mounting street light fitting fixing of GI. bracket on wall with 2 nos. 32 mm x 3 mm thick M.S. clamps including cost of cutting, welding of G.I. pipe complete with cement sand mixture, bolts and nuts etc. including necessary connections.
24.5.2.3 S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia
NS Item Supply and erection of MS box of size 8'' x 10'' x 4'' (20cmx25cm) and 10cm deep made of 1.6mm thick M.S. sheet covered with 5mm thick bakelite sheet for fixing of 4 Nos. socket and switch of 6 amp. and one No. of multi socket and switch of 15 amp. including fixing of one No. fuses unit and indicator off another make. the M.S. box is recessed in wall including cost of necessaru cement and mixture required to complete the job in all respect upto entire satisfaction of the Engineer-in-charge of work.
S/E of underground Ard. Cable loose in existing pipe or trenchs complete with necessary action.-10 Sqmm 4 core Make Havells/ Grandlay/ Polycab/ RR Kabel
MS Yongman Electrical
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .