Extension of Compound Wall and Parking Area Works at Government Collector Quarter at Beed Tq. Dist. Beed

Providing & fixing in position Phenol bonded Bamboo wood partition 60mm thick at all height with planks of size 10mm thick, 1800mm length ( minimum) and 130mm ( minimum), in approved colour, texture and finish, on both side having Performance Appraisal Certificate (PAC ) issued by Building Material & Technology Promotion Council (BMTPC), with necessary profiled edges fixed with 40 mm SS screws 5nos in each tile to frame made of second class teak wood of size 40 x 40 mm in center of each tiles and bottom / top of work height. The bamboo wood planks shall have minimum density of 1000Kilogram / cum & minimum Hardness 1000Kilogramf. with Eco friendly UV coating, all complete as per direction of the Engineer in -charge.

Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etcetera complete. (with reversible drum type mixer with SCADA with fine aggregates of required specifications (Natural sand / VSI sand finely washed etcetera )

Providing and laying vitrified matt fininsh tiles having size 590 mili metre to 605 mili metre x to 605 mili metre of 8 to 10 mili metre thickness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etcetera complete.

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25 mili metre to 450 mili metre section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etcetera as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete.

Supply and Installation of translucent roof with DPI Flux standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 12 mm thick of 900 mm (min.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility & strength. Panels with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2:2018. Panel shall be with

Providing and fixing crimped with Galvanised Iron mesh and size 20 mili metre x 20 mili metre 10 guage to iron angle frame including welding crimp mesh to angle frame and steel flat, fixing the frame in its original position and oil painting etcetera complete ( excluding cost of structural steel)

Single Bed @ 2025LX 1000DX 650H Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25 mili metre made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2 mili metre thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three Numbers of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25 mili metre made out of MS with a thickness of 1.2 mili metre The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25 mili metre made out of MS with a thickness of 1.2 mili metre All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Side Panel: - The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2 mili metre thick Polyvenyle Chloride edge Banding. The overall width of the side panel is 150 mili metre The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2 mili metre thick Polyvenyle Chloride edge Banding. The head board size to be considered as 1000 x 650 mili metre Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2 mili metre thick Polyvenyle Chloride edge Banding. The head board size to be considered as 1000 x 450 mili metre Bed Base: - The Bed Base is made up of 12 mili metre thick Prelam Particle Board with both side White laminate.

Bed Side Table @ 400LX 400DX 415H Providing and Fixing Bed Side Table of size 400LX 400DX 415H The bed side unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2 mili metre thick Polyvenyle Chloride edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2 mili metre thick Polyvenyle Chloride edge Banding

Providing and fixing mild steel grill gate with angle iron frame 65 mili metre x 65 mili metre x 10 mili metre with iron bars at 150 mili metre centre to centre and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Squre metre.

Providing & Fixing Precast Decorative Type Garden Benches with all necessary fittings jointing on proper foundation with size of 1.50 x 0.75 x metre with 3 persons seating arrangement including all accessories etcetera complete.