SPECIAL REPAIRS TO OMQs BLOCK NO P-63 AND P-75 AT AF STN HAKIMPET

Amount

B/R PORTION : Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L 25 mm thick PCC (1:2:4) type B0 using 12.50 mm graded stone aggregate as in floors complete all as specified and as directed.

M&L Double charged Vitrified Ceramic tiles of dark/light shade 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm, in floors etc. with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Double charged Vitrified Ceramic tiles of dark/light shade 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm, in floors etc for skirting in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Non skid ceramic tiles (Rectified tiles) of 7 to 8 mm thick (square/ rectangular) area of each the exceeding 0.18 sqm but not exceeding 0.38 sqm,of approved 1st quality in floors etc with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles complete all as specified and as directed.

M&L Non skid ceramic tiles (Rectified tiles) of 7 to 8 mm thick (square/ rectangular) area of each the exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Non skid ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each the exceeding 0.06 sqm but not exceeding 0.11 sqm,of approved 1st quality in floors etc with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry, pointed with white/colour cement to match colour of tiles complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding & conc (but not backing) and rubbish off the premises complete all as specified and as directed.

M&L for rendering to Stone masonry surfaces or fair faces of concrete surfaces, 10mm thick in cement mortar 1:4, scoured for fixing tiles /stone slabs in skirting/ dados etc to complete all as specified and directed.

M&L Glazed Ceramic tiles coloured, of size 600mmX350mm/300mmX(7-9)mm thick approved 1st quality as in vertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles complete all as specified and as directed. Note: PVC tile beading to be done at external corners along the edge of the tile and the cost is included in rate quoted above.

M&L Glazed Ceramic tiles coloured, of size 450mmX350mm/300mmX7mm thick approved 1st quality as in vertical surfaces such as skirting / dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white / coloured cement to match the colour of tiles complete all as specified and as directed. Note: PVC tile beading to be done at external corners along the edge of the tile and the cost is included in rate quoted above.

Dismantling of stone slabs of any description or thickness in floors and approns etc, laid,bedded and pointed in any mortar complete all as specified and as directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 15 mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and as directed.

M&L Roughening surfaces of old concrete floor/roof surfaces by picking, sweeping clean and washing down with water to remove dust,etc and Brushing neat cement slurry with 3.0 kg of cement per square metre on old concrete surfaces complete all as specified and as directed.

M&L Providing, cement concrete in roof padding of type B0 1:2:4 (12.5mm graded aggregate) complete all as specified and as directed.

M&L Rendering 15mm thick on fair faces of brick work / concrete surfaces in CM 1:3 finished even and smooth without using extra cement and mixing with WPC as per manufacturers instruction complete all as specified and as directed. Note:- WPC will be measured and paid separately.

Supply only liquid water proofing compound to incorporate in above item complete all as specified and as directed.

M&L Applying evenly a priming coat of industrial bitumen 85/25 at the rate of 0.3 kg per sq.m including cleaning surfaces complete all as specified and as directed.

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed.

M&L applying two coats of aluminium paint @ 0.1 ltr/Sqm per each coat complete all as specified and as directed.

M&L Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed with screed bed of CM 1:4, 15mm thick, set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and no pigments complete all as specified and as directed.

M&L Hardcore of gauge nexc 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to surface complete all as specified and as directed.

M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick in floors and pavings etc. complete all as specified and as directed.

M&L for Colour Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry colour to match including Screed bed of mortar 15 mm thick for laying floor finishes with cement motor 1:6 complete all as specified and as directed.

M&L Providing, cement concrete in roof kerbs or mud stops, rounded 1:2:4 type B0 using 12.5mm graded stone aggregate or complete all as specified and as directed.

M&L Plain Cement concrete type C-2, 1:3:6 (40mm graded aggregate) 75mm thick Laid in plinth protection including Grade B joint filling complete all as specified and as directed.

Removing excavated material exc 250m but n.exc 500m and depositing complete all as specified and as directed.

Taking down Chowkhats or frames with shutters n exc 1.5 sq. m each complete all as specified and as directed.

Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed.

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

S&F 35mm of 2nd class HW rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003(Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 30mm 2nd class HW thick factory made skeleton shutters, open rebated and preparedto receive gauze etc (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass etc ; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a); supplied and fitted to chowkat complete all as specified and as directed.

S&F 125 mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed, complete all as specified and as directed.

S&F 200 mm size Aluminium tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.

S&F 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed.

S&F 200mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and as directed.

S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed. Note: stainless steel butt hinges and necessary S S screws shall be paid separately.

S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for WPC door frame along with strong adhesives to Brass screws for fixing complete all as specified and as directed.

S&F 150 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed.

S&F 125 mm size extruded aluminium door handles fabricated type complete all as specified and as directed.

S&F Factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories is included and packing the gaps with silicon sealent complete all as specified and as directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose. (A) Area not exceeding 2.00 sqm each.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 4.0 mm thick sheet glass, ordinary quality and glazing with oil putty exc 0.5sqm in each pane complete all as specified and as directed.

S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for Preparing New wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for Preparing Old wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for Preparing new steel and iron surfaces of any description over 10 cm widthor girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for Preparing Old steel and iron surfaces of any description over 10 cm width or girth and applying a coat of synthetic enamel paint complete all as specified and as directed.

S&F in repairs 25 mm dia Stainless steel curtain rods with fixing brackets, End caps, stops, rollers etc.and taking down old pipe complete all as specified and as directed.

Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as specified and as directed.

M&L Rendering 10 mm thick in CM 1:3 on celling surface, finished even and smooth with out using extra cement up to ht 6.5 m complete all as specified and as directed.

M&L 3 coats of white wash over a coat of primer on newly plastered surfaces on ceilings complete all as specified and as directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces finished fair and even up to ht 6.5mtr complete all as specified and as directed.

M&L Rendering 15 mm thick in CM 1:6 on brick massonry surfaces of walls, finished even and smooth with out using extra cement complete all as specified and as directed.

M&L Complete removal of existing treatment on walls complete all as specified and as directed.

M&L for 2 coats of Oil bound distempering over a coat of primer over 3mm thick wall putty with white or tinted on walls complete all as specified and as directed.

M&L Raking out and Raised Pointing of CM 1:4 joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in Cement or cement lime mortar complete all as specified and as directed.

M&L Finishing walls on Stone masonry with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L Complete removal of existing treatment on ceilings complete all as specified and as directed.

M&L 3 coats of white wash over a coat of primer on old plastered surfaces on ceilings complete all as specified and as directed.

S&F 18/19mm Block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work complete all as specified and as directed.

M&L 1mm thick Laminate sheet (sunmyca sheet) glossy finish any colour paste with favicol on plywood/ Block board for cabinet and cupbord, commercial type on one sides complete all as specified and as directed.

M&L Soft closer drawer channel of any length as per requirement complete all as specified and as directed. Make : Godrej

M&L Stainless steel Basket any type / any size fixing complete all as specified and as directed.

S&F Stainless steel Handle 100mm dia complete all as specified and as directed.

S&F Clip on soft hinges full overlay complete all as specified and as directed. Make : Godrej

Extra over rates of 18/19mm thick particle board for external teak wood lipping, 6 mm thick,fixed with nails complete all as specified and as directed.

Supply and fixing 100 mm size hasp and staple, hinge type aluminium anodised complete all as specified and as directed.

S&F brass magnet for cupboard complete all as specified and as directed.

Dismantling of existing PVC 500-1000 ltrs water tank complete all as specified and directed.

S&F 1000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position complete all as specified and directed.

S&F 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position complete all as specified and as directed.

S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) complete all as specified and as directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore pipe complete all as specified and as directed.

Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store complete all as specified and as directed.

All same as per item No.81 here in before but 20 mm bore complete all as specified and as directed.

All same as per item No.81 here in before but 25 mm bore complete all as specified and as directed.

S&F 16mm bore CPVC pipes with SDR 13.5 pipes & plain CPVC SDR 11 fittings fixed complete to walls, ceilings,floors etc. in repairs complete all as specified and directed.

All as per item No.84 above but 20mm bore complete all as specified and as directed.

S&F steel water tubing 25 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Cutting chases, pinning in brick / Stone masonry walls where ever required for concealed water tubing or conduit wiring making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specified and as directed.

S&F sinks without drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe of overall size of 610mmX510mm bowl size 560mmX460mmX203mm including waste couplings, waste pipe in repairs and all other necessary fittings complete all as specified and as directed.

S&F in repairs CP Bibtap 15mm bore for Kitchen sink regular spout with flange of Make: Prayag, Catpart No 6616 or equivalent in other make complete as complete all as specified and as directed.

Taking down old plate rack and refixing new stainless steel plate rack in repairs of minimum size 970x770x230mm of standard quality, fixed to wall with wooden gutties and screws complete all as specified and as directed.

S&F in repairs Table top wash hand basin whiteflat back, size 510mmX410mmX150mm including couplings, waste pipe, connections and all necessary fittings complete all as specified and as directed. Make: Prayag Catpart No-4715 or quivalent in other make.

S&F in repairs 15mm bore pillar taps of Swan neck type CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and as directed. Make: Prayag Catpart No-6314N or quivalent in other make.

S&F in repairs 32mm CP Bottle traps for washbasin outlet Make: Prayag or equivalent in other make complete all as specified and as directed.

S&F Vitreous China wash hand basin whiteflat back, along with Pedestal size 550x400mm in repairs including couplings, waste pipe, connections all fittings complete all as specified and as directed.

S&F in repairs 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs complete all as specified and as directed. Make : Prayag Catpart No - 7314 or equivalent in other make.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc..and Seat cover for pedestal pan with complete all as specified and as directed.

S&F vitreous china squatting pan (orissa pattern), size 580x440 mm white with integral foot rests including removing the existing one complete and making good all connections as in repairs complete all as specified and as directed.

S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including 15 mm bore LDPE pipe 45cm long with brass nuts and washers complete all as specified and as directed.

S&F in repairs brass CP Two way tap screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and as directed. Make : Prayag/Parryware or equivalent

S&F in repairs brass chromium plated health faucet 15mm dia reinforced pipe fitted to GI pipe complete all as specified and as directed. Make : Prayag/Parryware or equivalent

S&F in repairs brass CP wall mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed as specified and directed Make: Prayag Catpart No-6675 or quivalent in other make.

S&F in repairs brass CP shower rose with arms 75 mm size fixed complete all as specified and as directed.

S&F 15mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs all as specified and directed. Make: Prayag/Parryware or equivalent.

S&F 15mm CP Angle valves, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and as directed. Make: Prayag/Parryware or equivalent.

S&F concealled stop valves 15 mm bore fancy type, chromium plated, with long shank and cup, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed.

S&F in repairs Chromium plated (CP) Toilet paper holder of vitreous china fixed to walls brass screws complete all as specified and as directed.

S&F Sheet glass shelf assembly for WHB consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long in repairs complete all as specified and as directed.

S&F Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard complete all as specified and as directed.

S&F CP Towel ring for WHB complete all as specified and as directed.

S&F Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed in complete all as specified and as directed.

S&F in repairs Soap dish any type fixed to plugs with chromium plated complete all as specified and as directed.

S&F in repairs Stainless Steel Pegset of 4 No Pegs fixed withand including CP brass screws and wooden/Plastic cleats and fixed complete all as specified and as directed.

S&F SS Grating round 140 mm dia (Minimum weight 50gms) and fixed in repairs complete all as specified and as directed.

S&F SS Grating doom 125 mm dia with waste hole (Minimum weight 40gms) and fixed in repairs complete all as specified and as directed.

M&L PVC (SWR) floor trap of 75mm, plain with grating jointing with solvent cement in repairs complete all as specified and as directed.

Demolition/Dismantling of CI/ PVC/ drain or waste pipes on floor or in wall any dia complete all as specified and as directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends of 75mm bore complete all as specified and as directed.

S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) 110mm pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) branch piece of 110mm bore, single (single Y) equal or unequal complete all as specified and as directed.

S&F PVC (SWR) branch piece of 110mm bore, double (double Y) equal or unequal complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

M&L for Demolition of Brickwork or stone/ boulder masonry, built in cement mortar, manholes including all quoins, arches, pillars, etc, but excluding dressed stonework and precast concrete articles complete all as specified and as directed.

M&L Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as directed.

M&L for providing reinforced precast cement concrete type C1 1:3:6 set in cement mortar 1:6 as in cover slabs as in drain covers complete all as specified and as directed.

M&L for TMT bars 10 mm dia and over, cut to length bent to shape required including cranking, bending, spirally hooping for columns and binding with MS wire (annealed) not less than 0.90mm dia wire etc complete all as specified and as directed.

Dismantling of wrought iron work or mild steel of any description not otherwise provided for complete all as specified and as directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Dismantling timber scantlings 40 Sqcm and over unframed work in fillets, rails, posts, rafters, purlins, etc. in section and in any position complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

M&L for MS angle iron conforming to Fe- 290(Gde E 165) as in fencing post complete all as specified and as directed.

Excavating in post holes in hard/dense soil not exc. 0.50 cum and getting out, return filling and removing surplus soil to a distance not exc. 50 mtrs and making good disturbed ground complete all as specified and as directed.

M&L for PCC 1:2:4 type B2 ( using 40 mm graded aggregate) for angle iron post complete all as specified and as directed.

Supply ony Chain link of size MS galvanised fencing any size or type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard, rails, straining bolts etc., including provision of binding wire complete all as specified and as directed.

M&L for Mild steel round bars 10 mm dia and over, cut to length, bent to required shape including cranking, hooking ends and securing with welding with 10 cm overlaping between two bar complete all as specified and as directed as in reinforcement.

M&L for Flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe- 290(Gde E 165) complete all as specified and as directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n exc 10cm long and dia of neck 11 to 15 mm complete all as specified and as directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. (each line wire to be measured)

E/M PORTION : Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and as directed.

M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable with proper colour coding in accordance with IS 694, 1100 volts grade drawn in ISI marked MMS non-metallic PVC conduit of size not less than 20mm dia conforming to IS 9537:latest, concealed type terminated in sunken type GI sheet metal flush boxes of 16 Gauge including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and as directed for following:- Note for Item No. 146, 147, 148, 185 & 186 :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column and core cutting of any description for concealing the conduits and boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule. (iv) Insulation resistance test: All wiring shall be tested with 500V Meggar between phases, phase – neutral and to Earth. IR value shall not be less than 1M-ohm.

One light/buzzer point controlled by one, one way switch complete all as specified and as directed.

One fan/exhaust fan point controlled by one, one way switch complete all as specified and as directed .

One 3 pin socket out let 5 amp point on the (same board) with other switches complete all as specified and as directed .

One 3 pin socket outlet 5 amp point on the independent board complete all as specified and as directed.

One light / fan point controlled by two, two way switch complete all as specified and as directed.

All as per item No. 146 here-in-before but with 4 sq mm size FRLSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for earth plug socket complete all as specified and as directed.

All as per item No. 146 here-in-before but with 2.5 sq mm size FRLSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board complete all as specified and as directed.

S&F modular metal flush box 3 module complete including any civil work required to make good the disturbed surface complete all as specified and as directed.

S&F modular metal flush box 4 module complete including any civil work required to make good the disturbed surface complete all as specified and as directed.

S&F modular metal flush box 8 module complete including any civil work required to make good the disturbed surface complete all as specified and as directed.

S&F modular metal flush box 12 module including any civil work required to make good the disturbed surface complete all as specified and as directed.

Supply and fixing of modular cover plate white with frame complete for 3 module complete all as specified and as directed.

Supply and fixing of modular cover plate white with frame complete for 4 module complete all as specified and as directed.

Supply and fixing of modular cover plate white with frame complete for 8 module complete all as specified and as directed.

Supply and fixing of modular cover plate white with frame complete for 12 module complete all as specified and as directed.

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and as directed.

Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and as directed.

Supply and fix modular switch 6 Amp, two way, 1 module, 230 volts AC circuit complete all as specified and as directed.

Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and as directed.

Supply and fix modular bell switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and as directed.

Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and as directed.

Supply and fix modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and as directed.

Supply and fix modular fan regulator 100 W 2 module complete all as specified and as directed.

S & F call bell, ding dong AC 230 Volt single pole complete all as specified and as directed.

S & F earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts with and including one MCB, SP, 20A, 240 Volts as per complete all as specified and as directed.

S & F in replacement 20W LED batten tubelight surface/wall mounted with powder coated Aluminium housing, high optically efficient polycarbonate diffuser, inbuilt electronic driver duly wired upto terminal block, luminous efficiency > 100 lm/watt, surge protection upto 4kV, 440V High voltage protection, power factor > 0.95, CRI > 80 and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface complete all as specified and as directed. Model: Crompton Linea Pro or similar

S&F angular lamp holder PVC / Polycarbonate type with cord grip cap suitable for T type LED lamp fitting including LED bulb complete all as specified and as directed.

Supply and fix electric water heater, vertical storage type with ferroglass coated anti-rust inner container and heating element upto 2 KW capacity 25 litre, heavy duty anode rod, preset thermal cutout, BEE 5 Star rated as per latest BEE norms (i.e. standing losses ≤ 0.465 kWh/24 hour/45°C which is only valid till 31st Dec 2025, material shall be supplied as per latest revision at the time of supply, complete with all accessories such as safety valve, thermostat, NRV, connection piece (hot and cold water connection pipe) etc complete all as specified and as directed. Make : Model : Havells Monza DX or similar

Supply and fix stop valve of dia 20 mm with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and as directed.

Supply and fix bib tap of dia 20 mm cast iron alloy with crutch or butterfly handle screwd for iron pipe to outlet pipe of geyser complete all as specified and as directed.

Supply and fix of any length CPVC pipe of dia 20 mm dia manufactured as per IS : 15778 including connection sockets, elbow and brass tee for connecting pipes etc and connecting pipe to inlet and outlet of the geyser complete all as specified and as directed.

Taking Down water heater (Electric Geyser) storage type of any make of 25 / 50 ltr capacity after disconnecting the existing electrical connection, water pipes and deposit to E/M store yard and and refixing in the original place/position duly connecting up water supply and electric supply etc.complete all as specified and as directed.

Disconnecting and removing ceiling fan of any sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly, lubricating with approved lubricants, reassembling, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc & testing complete all as specified and as directed.

Taking down distribution boards / main switches of any type, size and capacity complete all as specified and as directed.

Taking down MCBs, metal clad plug of any type, size and capacity complete all as specified and as directed.

S & F sheet metal enclosure powder painted for VTPN DB 04 way double door with IP-42 protection with Din rail and busbar complete all as specified and as directed.

S & F sheet metal enclosure powder painted for MCB DB TPN 04 way double door with IP-42 protection with Din rail and busbar complete all as specified and as directed.

S & F sheet metal enclosure powder painted for MCB DB SPN 08 way double door with IP-42 protection with Din rail and busbar complete all as specified and as directed.

Supply and fixing MCCB , 415V, fixed type 125 Amps with breaking capacity 16 KA complete all as specified and as directed.

Supply and fixing MCB TPN, 40-100 Amps in `C’ series having current rating 10 KA complete all as specified and as directed.

S&F MCB single pole to neutral, 32 Amps in `C’ series having current rating 10 KA complete all as specified and as directed.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and as directed.

Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces complete all as specified and as directed.

M/L for Sub main wiring with 4 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessories with 6 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up complete all as specified and as directed. Note: 4 runs of 6 sqmm copper cable and one run of 6qmm earth wire and conduit/Casing & Caping will be measured as one length complete all as specified and as directed.

M/L for Sub main wiring with 4 runs of PVC insulated unsheathed multi stranded single core copper conducter 10 Sqmm drawn through PVC conduit/casing capping including accessaries with 10 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up complete all as specified and as directed. Note: 4 runs of 10 sqmm copper cable and one run earth wire and conduit/Casing & Caping will be measured as one length complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified and as directed. Note: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.

Disconnecting and removing exhaust fan of any sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of exhaust fan complete with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc & testing complete all as specified and as directed.

M&L for cutting round holes suitable for fixing of exhaust fan/chimney pipe of size 150-300 mm into through stone walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required and plastering in CM 1:4 external / internal surfaces and finished to match with the existing surfaces complete all as specified and as directed.

S&F Reading lights with 3W, 240V AC, 4000K flexible reading lights complete all as specified and as directed. Make : Philips Model No. 30975 or equivalent.

S&F wall light, 23W, body colour white complete all as specified and as directed. Make : Philips comet or equivalent

Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, ISI marked, 1100 volts grade of cross sectional area 50 sqmm 3.5 core conforming to IS 7098 complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations / taking out / in cables / pipes etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and getting out in any complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick in soil complete all as specified and as directed.

Removing surplus soil obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting paint complete all as specified and as directed.

Supply and fill riddled soil obtain from excavated soil upto depth of 30cm (8cm below cable and remaining above cable) for cushioning of cable complete in respect complete all as specified and as directed. Note :Excavated soil shall be riddled by using sieve to seperate composite particles etc as per IS 1255:1983 and refilling in trenches as in cable cushioning.

Supply and fix precast concrete cable covers class LV type-1, flat size 250 x 150 x 40 mm M-20 grade concrete laid dry for cable protection complete all as specified and as directed.

Supply, Install, testing & commissioning factory made indoor type dust and vermin proof CPRI approved Feeder pillar panel board cubical double door hinged type compartmentalized of suitable size 415 volts, AC 50 Hz fabricated of CRCA sheet 3.15 mm thick machine pressed grouted in PCC 1:2:4 type B1 (20mm grade stone aggregated) powder coated inside and outside complete including 4 poles copper bus bar of suitable size mounted on porcelain insulators and enclosed in chamber made out of 3.15mm thick CRCA sheet machine pressed and connection from incoming and outgoing electric cable with suitable size thimbles / lugs cable gland with open able shutters and comprising of the following complete all as specified and as directed. :-

Incoming MCCB 125 Amp, 36 KA, 4 Pole 415 Volt - 01 Nos

Outgoing MCB SP 6-32 Amp, 10 KA, 240Volts - 12 Nos

Copper bus bar for 3 Ph & Neutral 200 Amp- 01 Set

Panel should have provision and space to install five no of 3 phase electric meters and 1No. 1-ph electric meter.FRLSH grade copper Electric wiring from outgoing MCBs to Electric meters to be provided with suitable size copper wire. Electric meters will be supplied by MES. Wiring from electric meter to main DB shall be measured separately. Protective fuse shall be provided for individual meters and is inclusive in the quoted rate.

Phase indicator neon lamps for 3 Ph -01 Set

Supply and fixing of electric chimney capacity of Air flow of 1500 Cum / hr of size of 90 cm specifications of heat auto clean with motion sensor, Auto off function, touch sensor control, brushless DC motor 9 speed control, oil collector tray, electric lights LED, filter less chimney including aluminium pipe from chimney to exhaust hole complete all as specified and as directed. Make : Model No. Elica WDFL 900 BLDC HAC LTW MS NERO or equivalent

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket of GI pipe medium grade 32mm dia with impact and corrosion resistance including thermal management in multiple optics complete with IP 65/66 protection with suitable pipe for fitting to surface, no of nuts, bolts and clamps complete all as specified and as directed.

S&F LED light fitting in replacement of 10 watt bulk head luminaries complete with all accessories and including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

Saiansh Associates (BID ID -3499612)

bholanath bera (BID ID -3505833)

saradhi construction combines (BID ID -3499852)

Dwarka Pershad Radhey Ramanlal (BID ID -3495268)

Vipin Kumar and Brother (BID ID -3500266)

POWER CONSTRUCTION COMPANY (BID ID -3505653)