Construction of Customs office, Medical Facility Centre, Creche Buildings, Canteen, convention Centre, A.O. Block, Entrance arch,Plug and Play and Warehouse,Water Supply System ,sewarage system , compound wall at SIP, Panapakkam

Amount

A) Construction of Customs office, Medical Facility Centre, Creche Buildings, Canteen and convention Centre, A.O. Block and Entrance arch at SIPCOT Mega Leather Park, Panapakkam in Ranipet District. (Package 3).

ADMIN BUILDING

Clearing light Jungle on road side including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness..etc., complete complying with standard specification and as directed by the SIPCOT officers.

Providing Pre – Constructional Anti – Termite Treatment and creating a Chemical Barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, footings, column pits, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. Retaining / side walls, external perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining / side walls etc. as per instructions of chemical manufacturer and all as directed. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification. etc., complete complying with standard specification and as directed by the SIPCOT officers.

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc., complete complying with standard specification and as directed by the SIPCOT officers.. (including refilling)

a) 0 to 2 m depth

b) 2 to 3m depth

Supplying and filling in foundation and basement with Stone dust/Quarry dust in layers of 150 mm thickness well watered ramming, consolidation etc., complete complying with standard specification and as directed by the SIPCOT officers.

Providing Plain Cement Concrete 1:4:8(One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with etc., complete complying with standard specification and as directed by the SIPCOT officers. (in all heights and all depths)

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS etc., complete complying with standard specification and as directed by the SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

Foundation & Basement

Ground floor

First floor

Second floor

Third Floor

Fourth floor

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

a) For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works

b) For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works. (0-3 m)

c) For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc., complete complying with standard specification and as directed by the SIPCOT officers. (The steel rods must be Fe 500 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

Refilling with excavated soil (other than sand) complying with standard specification for filling in foundation and basement.

Brick work in Cement Mortar 1:5 (One part Cement and five part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Founation and basement

Brick work in Cement Mortar 1:6 (One part Cement and six part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

SILT FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

ROOF FLOOR

Providing brick masonry partition wall 115 mm thick using II class ground moulded chamber burnt bricks of size 9" x 4.5" x 3" in cm 1:4 (one cement and four M sand ) including supplying and providing 2 nos. of 6 mm dia hoop reinforcement at every 4th layer, curing, raking out of the joints etc., complete compiling with standard specification.

SILT FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

Plastering with cement mortar 1:5 (One of cement and five of M sand) 12 mm thick finished with neat cement including, providing band cornice, ceiling cornice scaffolding curing etc., complete complying with standard specification and as directed by SIPCOT officers.

Plastering in C.M 1:3 (one of cement and three of M sand) 10 mm thick for bottom of sunshade, ceiling in all floors, including scaffolding, curing, finishing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Sunken portion - Filling with broken brick jelly lime concrete using 40 to 20 mm gauge broken brick jelly in pure slaked lime (no sand) over roof slab to the proportion of brick jelly to lime (fat lime) being 32 : 12 1 /2 by volume well beaten with wooden beaters, for giving the required slope and thickness including laying and finishing, etc, all complete complying with standard specifications and as directed by "SIPCOT" officers

Providing expansion joint of 25mm width in between RCC twin columns from top of pedastal to full height including filling the inner space with suitable non - absorbent, flexible and well compressible filler materials of approved quality and brand; finishing the sides of RCC columns with polysulphide sealents for a depth of 7.5mm on either side covering the inner space filled with filler materials as above etc., complete complying with the standard specificaiton and as directed by SIPCOT officers.

Supply of 50 mm thick AAC Prefabricated Fibre Reinforced Sandwich Panels having K (Thermal conductivity) value of 0.18 W/m.k or less (M-2310) etc., complete complying with the standard specificaiton and as directed by SIPCOT officers.

Plastering with cement mortar 1:3 (One of cement and three of M sand) 12 mm thick finished water proofing compound with neat cement including, providing band cornice, ceiling cornice scaffolding curing etc., complete complying with standard specification and as directed by SIPCOT officers.

Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied @ 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, including a prime coat of solvent free, medium viscous, epoxy primer @0.2L/m2 and protection with 120gsm Geotextile over the 7 days cured waterproofing membrane. The Waterproofing material shall have Solids > 85%, Tensile strength >2 Mpa as per ASTM D 412, Elongation at break >400% confirms to ASTM C 1305 for crack bridging ability (no cracks up to 3.2mm) Shore A Hardness >55 as per ASTM D 2240, Adhesion to peel after water immersion as per ASTM C 794 at 5.2N. Resistance to root penetration as per UNE CN/ TS 14416. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 60gsm Geo-textile over the angle fillet when the first coat in still wet, treatment of cracks and laying 120GSM Geo-textile as seperation/protective layer over the fully cured PU coating completely as per specification.( W-0303)

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom, toilet, balcony & utility area applied @ 2.2kg/m2 in 2 coats to achieve 1.2mm DFT, having Elongation at break >120% as per ASTM D 412, Tensile strength >1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification.

Painting two coats of newly plastered External wall surface with ready mixed Weather proof Exterior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting two coats of newly plastered internal wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

White washing Two coat with freshly burnt white shell lime in all floors including cost of lime, blue powder, fevicol type gum, brushes, scaffolding charges, etc., complete complying with the standard specificaiton and as directed by SIPCOT officers.

Supplying and laying of ceramic tiles anti-skid 305 x 305 x 6 mm of approved special quality laid in cement mortar 1:3 (One of cement and three of sand) 20 mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc all complete in all respects etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. Note: (The colour and quality shall be approved from the Engineer before use)

Dadooing for walls Supplying and fixing in position of colour glazed designed wall tiles of any size 6 mm thickness laid in cement mortar 1:2 (One of cement and two of sand) 10 mm thick for wall facing / duding, skirting over the plastered surfaces including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. Note: (The colour make and quality shall be approved from the Engineer before use)

Dadooing for walls Supplying and fixing in position of colour glazed / matt finish designed wall tiles (for elevation) of any size 600 x 300 x10 mm thickness laid in cement mortar 1:2 (One of cement and two of sand) 10 mm thick for wall facing / duding, skirting over the plastered surfaces including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. Note: (The colour make and quality shall be approved from the Engineer before use)

Supplying and fixing of Double Charged Vitrified Tiles 800 x 800 x 10mm of best approved quality and colour laid in cement mortar 1:3 (One of cement and three of sand) 20 mm thick and pointed with coloured cement neatly including cutting to the required size and shape wherever necessary finishing neatly etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (The colour and quality of the tiles should be got approved by the Engineer before use)

Paving the floor with best approved quality fine polished Steel Grey granite stone slabs of size 1200 x 600 of 16mm to 18mm Thick with machine cut edges laid over a cement mortar bed of 20 mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with matching colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Engineer concerned before use on work, etc., complete complying with the standard specificaiton and as directed by SIPCOT officers.

Supplying and fixing 20 mm thick machine cut granite stone slabs of size 1200 x 600 and synthetic grey, paradise and similar varieties. treads and risers in single piece for all staircases with rounded edge nosing and 3 nos. of antiskid grooves over a cement mortar bed 20 mm thick average, in CM 1:4 finished in all respects, including prefinished nosing to treads of steps, cost of materials, labour, curing etc., complete complying with the standard specificaiton and as directed by SIPCOT officers.

Nosing - Single

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding,grinding, polishing, conveyance, electrical charges, etc.complete

Finishing the top of roof slab with one course of hydraulically pressed tile of approved superior quality of size 23 cm x 23 cm, 20 mm thick laid over weathering course in cement mortar 1:3 (One of cement and three of M sand) 12 mm thick, mixed with water proofing compound at 2% by weight of cement used and pointed neatly with the same cement mortar mixed with water proofing compound including curing etc., complete in all respects complying with relevant standard specifications and as directed by the engineer in charge. (Note: Tiles to be got approved by the SIPCOT SIPCOT Officer. before use and only one particular size pressed tiles should be used for one type of building)

Supplying and fixing Solid panel PVC door with frame using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter etc., complete complying with the standard specificaiton and as directed by SIPCOT officers.

Supplying and fixing of PVC Sliding Door with Roller etc., complete complying with the standard specificaiton and as directed by SIPCOT officers.

Supplying and fixing of wrought and put up in position of frames inclusive of fixing holdfasts for doors, windows and ventilators etc.

a) 0 to 2m length

b) 2 to 3m length

Supplying and fixing of Solid Core Flush Shutters with teakply on both side with teakwook lipping alround 35mm thick with Ornamental Door Handle 200mm long – 2 nos, 5" Butt Hinges – 3 nos, 250mm long and 12mm dia Tower Bolt – 2nos, Mortice Lock With Night latch (Godrej or Equivalent) with required screws with 3 Keys – 1 no, Rubber Bush - 40mm dia – 1no and door stoper 1no vision panel 150x450mm as per drawing etc., cost including all material, labour charges and all hardwar materials etc., all complete complying with standard specification as directed by the SIPCOT Officer.

Flush door shutter size 900x2100 ( Single leaf)

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and fixing mild steel grills for windows, ventilators veranda enclosure, ladder and gate as per the design approved including one coat of primer and labour for fixing in position etc, all complete complying with standard specifications and as directed by "SIPCOT" officers. (The design of grill should be got approved from the SIPCOT SIPCOT Officer. before use)

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors excluding cost of priming coat etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.. (The make, quality and colour of paint should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Supply and installation of Anutone (or) Equivalent Brand of Acoustical False Ceiling of Sisoli Serene / Slate Spirts / Slate Polka Mineral Fibre/ GRG Core Ceiling Tiles of size 595 x 595 x 15mm having volume density 270 kgs / m3, weight 4kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. The skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 Cross T with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally skelet CT15 W06 Cross T with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15 W12 Cross T in direction parallel to the Main T15 to result in 600 x 600mm module. Sisoli Serene / Slate Spirts / Slate Polka of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. The systems to achieve noise reduction coefficient not less than 0.5 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, Scaffolding, transportation, conveyance, etc., complying to standard speciation.

Supplying and fixing of 12mm thick toughened frosted/plain glass with top patch, bottom patch, corner lock and SS H type handle 500mm long with required screws, Double Acton Hydraulic Floor Spring and imported SS finish in dobule leaf door including labour charges and other fitting, door beading with standard specification, door for all size and floors etc all complete and as directed by the SIPCOT Officer.s.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the SIPOCT SIPCOT Officer. before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the SIPCOT SIPCOT Officer. before use on work

Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10 cm to 13 cm dia including cross bracing etc. complete complying with standard specifications and as directed by "SIPCOT" officers.

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the SIPCOT Officer.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Supply and fixing of Cladding sheets out of 0.47 mm TCT coated galvalume sheets, rate including all materials, labour charges, scaffolding, staging, transportation, lead & Lifts, wastage, etc,. No separate payment made for bolts, nuts, self driving screws, washers, welding etc.., all complete, as directed by the SIPCOT Officer.s.

Designing the Semi Unitised Structural Glazing System with open groove joint as per design intent, preparation of shop drawings for approval, supply, fabricate, erect as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by the Dept. SIPCOT Officer..) Design the framing system (i.e. male & Female frame) to support vision panels, spandrel panels either with glass or aluminium composite panel, openable, window panels on a continuous framing supported between floors. Also design the split framing unutilized glazing system in case of strip or punched windows with vision panel proposed with either insulated / Monolithic glass, groove width in the system both in horizontal and vertical shall not be more than 20mm. Glazing of panel shall be done only at factory at the controlled atmosphere

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc Gear Operated Type (from 8 sqm. to 12 sqm. Area)

Towards Materials and Labour charge for VDF flooring Finishing and Groove cutting for Car Parking , Scope of Work: Ms Channel Fixing 12' 6" c/c Concrete Laying , Leveling and Screed Vibrating using for Consolidating and leveling concrete, , Excess Water removing By VDF Method and finishing by power trowel Machine [ 3 level], Providing floor hardener Spreading [ Mixing] on concrete [ 4 kg sqmt fosroc make [, Groove cutting 4mm width ,depth of 10mm filling and finishing with [Chemical ]polysulphide sealant [ sika / Fosroc make ] Rmc concrete Supply by Client

Providing and laying with two-part elastomeric fuel resistance, UV resistant, Non-toxic once cured, resistant to flame, pouring grade liquid polysulphide sealant to fill the expansion joint, Control joints in parking area, construction joint in airport runway, Tanks, bridges & concrete roads. The sealant shall have Elongation min. 450% confirms to ASTM D 412, movement accommodation for butt joint 25% & for lap joints 50%. The sealant should meets the requirement of BS 5212, BS 4254 & ISO:11600. Ensure that apply a coat of polysulphide sealant primer @0.5L/m2 to get better adhesion on prepared surface before placing the sealant. The finished cost including surface preparation, filling foam backer rod, applying masking tape on both sides of the joint & polysulphide sealant filling on gap completely as per specification. 30mm width

Providing and fixing of fixed glass railing with 12mm thick frosted / plain toughended glass as per architectural drawing with necessary aluminium / stainless steel 304 grade frame dorma crown series patch fixtures extra complete as per specifications and as directed by SIPCOT SIPCOT Officer.

Supply and installation of Glass Fibre Reinforeced Concrete (GRC) 20 to 25 mm Thickness.(Single side Finish). The FRC will be made of using 53 grade white portland cement manufactured by JK cement or equivalent.Quarty fine silica sand,Alkali resistant glass fiber manufactured by "NEG" Japan or CEMFIL spain or equivalent. Super plasticizers and polymers manufactured by BASF, sika or equivalent all necessary fasteners and anchor bolts will be used for fixing. . Mesaurments are as per Cadd Drawing, any changes in drawings will reflect on pricing.GRC (OCTOGONAL SHAPE) Columns with CAPITAL, Pillar and PEDESTAL, Size :- 400 mm ( W ) x 15 mtr Ht.

Supply and Installation of GRC ELEMENTS , etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.

Supply and Installation of GRC HAND RAIL -TOP and Bottom with Centre Design including GRC POSTS of 1 mtr Height etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.

Supply and Installation of GRC POSTS of 1 mtr Height etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.

Internal Electrification

Floor power panel: Design, manufacture, supply, erection, testing and commissioning of main Power panel suitable for 415Volts 3Phase 4wire system, indoor/outdoor installation, made up of CRCA sheet steel of thickness not less than 2 mm with a weather proof canopy of top, double door construction, IP 55 protection, anti corrosive chemical resistant paint dust & vermin proof, cubicle type, floor mounted, undrilled gland plates at top / bottom, complete with internal wiring, ferrules, name plates, Locking System with heat shrinkable colour coded sleeve with SMC Bus bar supports with aluminium Busbar 400A, 50 kA, TPN 50 Hz, bus bars . The Panel should be fully comply to IEC 61439 part 1 & 2 of type tested assembly with incomer : 1 Nos - 400A, 4P, 50kA MCCB Microprocessor based releases (with Over current / Earth fault / Short circuit ) & Trip & close Coil feature with earthing, door interlock, automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming & outgoing cable sides of the circuit breaker metering for each Incomer and out goings: Load Manager with RS485 Interface with Maximum Demand Indication + controller, automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming & outgoing cable sides of the circuit breaker with associated protections MCB's, R,Y,B Phase Indicating lamps and control circuit as required and energy meter for out going feeders etc. Out going: 100A 4P Microprocessor based MCCB- 10Nos 63A MCB, 4P-2Nos 40A MCB, 4P-2Nos with digital multifunctional meter with RS485 port and suitable CT etc. including concrete pedestal and associated civil works etc. complete and as approved and directed by SIPCOT Officer.

Floor Lighting panel:Design, manufacture, supply, erection, testing and commissioning of main Power panel suitable for 415Volts 3Phase 4wire system, indoor/outdoor installation, made up of CRCA sheet steel of thickness not less than 2 mm with a weather proof canopy of top, double door construction, IP 55 protection, anti corrosive chemical resistant paint dust & vermin proof, cubicle type, floor mounted, undrilled gland plates at top / bottom, complete with internal wiring, ferrules, name plates, Locking System with heat shrinkable colour coded sleeve with SMC Bus bar supports with aluminium Busbar 200A, 36 kA, TPN 50 Hz, bus bars . The Panel should be fully comply to IEC 61439 part 1 & 2 of type tested assembly with incomer : 1 Nos - 160A, 4P, 36kA MCCB Microprocessor based releases (with Over current / Earth fault / Short circuit ) & Trip & close Coil feature with earthing, door interlock, automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming & outgoing cable sides of the circuit breaker metering for each Incomer and out goings: Load Manager with RS485 Interface with Maximum Demand Indication + controller, automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming & outgoing cable sides of the circuit breaker with associated protections MCB's, R,Y,B Phase Indicating lamps and control circuit as required and energy meter for out going feeders etc.Out going:63A 4P Microprocessor based MCCB- 9Nos 63A MCB, 4P-1Nos40A MCB, 4P-1Noswith digital multifunctional meter with RS485 port and suitable CT etc. including concrete pedestal and associated civil works etc. complete and as approved and directed by SIPCOT Officer.

Supply and fixing of 6 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal door) with 1 no. 160A 4P MCCB switch as incoming and 4 nos. 63A 3P MCB, 6 nos. 6A to 32A SP MCB as outgoing with suitable cable end box in flush with wall with earth connection etc. complete as directed and approved by engineer incharge.

floor LDB : Supply and fixing of 7 segment 8 way 63A TPN MCB sheet steel distribution board with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 24 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection and provisions for taking up cable for size upto 35 sq.mm.etc. complete as directed and approved by engineer incharge.8 ways 3 phase DB404P MCB - 1 no.40A 4P 30MA RCCB/ELCB - 1 no.40A DP MCB Isolator -3 nos.6A to 32A SP MCB - 24 nos

floor small power PDB : Supply and fixing of 7 segment 8 way 63A TPN MCB sheet steel distribution board with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 24 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection and provisions for taking up cable for size upto 35 sq.mm.etc. complete as directed and approved by engineer incharge.8 ways 3 phase DB63A 4P MCB - 1 no.63A 4P 30MA RCCB/ELCB - 1 no.63A DP MCB Isolator -3 nos.6A to 32A SP MCB - 24 nos

SPNDB: ELDB Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only etc.complete as directed and approved by engineer in charge.

1 PHASE UPS:Supply erection, testing, commissioning of 1 PHASE, 3KVA, UPS WITH BATTERY - 1 HOUR BACKUP with earth connection etc.complete as directed and approved by engineer in charge.

LT Cable and End Termination

Supply and laying of the following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc. complete and as directed by SIPCOT Officer..

3.5 core x 95 sq.mm. Ar. Alu. UG cable

3.5 core x 240 sq.mm. Ar. Alu. UG cable

3.5 core x 50 sq.mm. Ar. Alu. UG cable

4 core x 16 sq.mm. Ar. Alu. UG cable

3.5 core x 25 sq.mm. Ar. Alu. UG cable ( To lift )

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete and as directed by SIPCOT Officer.

3.5 core x 95 sq.mm. Ar. Alu. UG cable

3.5 core x 240 sq.mm. Ar. Alu. UG cable

3.5 core x 50 sq.mm. Ar. Alu. UG cable

4 core x 16 sq.mm. Ar. Alu. UG cable

3.5 core x 25 sq.mm. Ar. Alu. UG cable

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc. complete and as directed by SIPCOT Officer..

3.5 core x 95 sq.mm. Ar. Alu. UG cable

3.5 core x 240 sq.mm. Ar. Alu. UG cable

3.5 core x 50 sq.mm. Ar. Alu. UG cable

4 core x 16 sq.mm. Ar. Alu. UG cable

3.5 core x 25 sq.mm. Ar. Alu. UG cable

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

Light point wiring

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point etc.complete as directed and approved by engineer in charge.

Power point wiring with GI box, socket & switch

Wiring with 2 x 2.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable PVC Rigid Pipe 20mm (3/4”) Concealed in wall and ceiling with accessories with suitable Module GI switch box in flush wall with 1 no. 6A one way module switch and 1 no. 6A 5 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit Plug point etc.complete as directed and approved by engineer in charge.

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge PVC conduit pipe concealed in wall and ceiling with accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A/6A 3 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion etc.complete as directed and approved by engineer in charge.

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge PVC conduit pipe concealed in wall and ceiling with accessories with Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit etc.complete as directed and approved by engineer in charge.

Supply, installation, testing and commissioning of 2 TR Split Type AC Unit - 5 Star Rated with Supply and installation of 4 KVA capacity Automatic Voltage Stabilizer with time delay relay and Supply and fixing of MS stand for fixing outdoor unit, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Circuit main wiring

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC Rigid Pipe 25mm (1”) concealed in wall and ceiling with all accessories and continuous earth wire connection of 2.5 sq. mm copper wire with painting of suitable colour etc.complete as directed and approved by engineer in charge.

Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC Rigid Pipe 25mm (1”) concealed in wall and ceiling with all accessories and continuous earth wire connection of 4 sq. mm copper wire with painting of suitable colour etc.complete as directed and approved by engineer in charge.

Light Fixtures and fan point

Supply, installation, testing and commissioning of Double Height Chandelier light fitting with Dimmable LED with Remote Control , Temperature: 3000K-6500K, Color Temperature: Warm White, Cool White, Day Light, Holder & Plug Type: Built in LED, Overall Dimensions- Height: Upto 238" Diameter: 40" with inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of 36W LED 2x2 square type Recessed fitting with LED on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of 24W LED Round type Recessed fitting with LED on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer.. ( In Toilet )

Supply, installation, testing and commissioning of 18W LED Round type Recessed fitting with LED on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT Officer.. ( In Toilet )

Supply, installation, testing and commissioning of 40W (2x20W), 4ft LED tube light fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of MIRROR Light 20W LED Batten inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of LED Foot lamp with inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of 15W LED bulk head fittings with inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of 11W Bollard Light with inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete with 2 module 100W fan step regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") etc. complete as directed and approved by engineer incharge and as directed by SIPCOT Officer..

supply and fixing of 300mm (12") sweep AC exhaust fan complete with louvers shutters arrangements for 300mm (12") sweep etc complete as directed and approved by engineer incharge etc. complete and as directed by SIPCOT SIPCOT Officer..

supply and fixing of 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer..

Supply and run of 50mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply and run of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply and run of 1 of No.8 SWG GI wire for earth connection with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Plate Earthing as per PWD standard with a copper earth plate of size 600X600X3mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer..

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply & laying of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height Ladder type cable tray inside the electrical room etc. complete as directed and approved by engineer incharge and as directed by SIPCOT Officer..

Supply and laying of GI Hot Dip Raceways size of 300mm x 38mm including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply ,Excavation and laying of HDPE Pipe 120mm / 103.50mm for electrical cable laying road crossing etc., complete and as directed by SIPCOT SIPCOT Officer..

Supply, laying, commissioning and testing of CAT 6A UTP Unarmoured Cable through 25mm PVC conduit .or as per the approval of site engineer incharge. painting of suitable colour etc.complete as directed and approved by engineer in charge.

Supply and installation of PVC Module Box with Face Plate Single Socket RJ-11/RJ45 back boxes with covers, with the crimping of appropriate jacks and all other necessary accessories telephone points fed through PVC insulated telephone cables inside 25 mm diameter PVC conduits etc., complete complying with standard specifications and as directed by site engineer incharge.

Lift DB: Supply and fixing of 6 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB Incomer ) with double door (metal door) with 1 no. 125 A 4 P MCCB switch as incoming and 4 nos. 40A 3P MCB , 6 nos. 6A to 32A SP MCB as outgoing with suitable cable end box in wall with earth connection etc. complete as directed and approved by engineer incharge.

EPABX SYSTEM

Supply, installation, testing & Commissioning of 3 Trunk + 16 Analog Extensions. Expandable Up to 96 Analog Extension & 112 IP Port etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Basic Link Card for main system - To connect main system with expansion system. etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Basic Telephone without Caller ID etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Caller ID Telephone with Speaker etc. complete and as directed by SIPCOT Officer..

Supply, Installation, commissioning, testing of Media converter for OFC cable single mode etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, Installation, commissioning, testing of LAN NETWORK SWITCHES -24 Port etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, laying, commissioning and testing of telephone cables through 25mm PVC conduit .or as per the approval of site engineer incharge.

Supply and installation of PVC Module Box with Face Plate Single Socket RJ-11/RJ45 back boxes with covers, with the crimping of appropriate jacks and all other necessary accessories telephone points fed through PVC insulated telephone cables inside 25 mm diameter PVC conduits etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, installation,9U Rack- RACK WITH ACCESSORIES inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Passenger Lift

Design, manufacture, supply, erection, testing and commissioning of Passenger Lift having capacity of Max. 8 Persons with MRL, Speed 1.5 m/s with Stainless Steel Panels, Disable friendly, microprocessor based controller, VVVF drive, Fire rated doors and ARD with on-site comprehensive warranty of lift from the date of successful commissioning of lift at the designated location & shall cover each and every part of the lift. The lift shall be supplied with main control panel suitable for 415Volts 3Phase 4wire system made up of CRCA sheet steel of thickness not less than 2 mm single/double door construction, IP 55 protection, anti corrosive chemical resistant paint dust & vermin proof, cubicle type, floor mounted, undrilled gland plates at top / bottom, complete with internal wiring, ferrules, name plates, Locking System with heat shrinkable colour coded sleeve with associated protections MCB's, R,Y,B Phase Indicating lamps and control circuit as required and including concrete pedestal and associated civil works etc. complete and as approved and directed by SIPCOT Officer.

Design, manufacture, supply, erection, testing and commissioning of Goods/Service lift MRL, Speed 1 m/s with Stainless Steel Panels, microprocessor based controller, with Stainless Steel Panels, Disable friendly, microprocessor based controller, VVVF drive, Fire rated doors and ARD with on-site comprehensive warranty of lift from the date of successful commissioning of lift at the designated location & shall cover each and every part of the lift. The lift shall be supplied with main control panel suitable for 415Volts 3Phase 4wire system made up of CRCA sheet steel of thickness not less than 2 mm single/double door construction, IP 55 protection, anti corrosive chemical resistant paint dust & vermin proof, cubicle type, floor mounted, undrilled gland plates at top / bottom, complete with internal wiring, ferrules, name plates, Locking System with heat shrinkable colour coded sleeve with associated protections MCB's, R,Y,B Phase Indicating lamps and control circuit as required and including concrete pedestal and associated civil works etc. complete and as approved and directed by SIPCOT Officer.

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer..

Supply and run of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Solar Rooftop

Solar Rooftop:Supply, erection, testing, commissioning of Solar PV rooftop On Grid Plant comprising of followings,i) Solar panels of type Mono Crystalline, PERC, etc.ii) Power Conditioning Unit (PCU)with MPPT, Inverter, Controls, Protection Devices, Interconnecting D.C. cables,Connectors, Junction Boxes and accessories.iii) D.C. D.Biv) A.C. D.Bv) A.C. cables and accessoriesvi) Lightning arrestor, earthing, etc.vii) Module Metallic Mounting Structuresviii) Installation, Testing and Commissioning corresponds to BIS and IEC requirementsetc.complete as directed and approved by engineer in charge.

Fire Alarm System

Supplying, installation, testing & commissioning of Fault Isolator Module capable of monitoring shorted loop circuit and automatically restore communications complete as required etc. complete as per specification as per the engineer-incharge approval.

Supplying, installation, testing & commissioning of Addressable Multi detector with base with Binary coded address setting Dual LED’s for 360° visibility etc.complete as per specifications as per the engineer-incharge approval.

Supplying, installation, testing & commissioning of addressable manual call point Resettable type - with back box with Binary coded address setting with Status LED for 360° visibility complete as require etc.complete as per specifications or as per the engineer-incharge approval.

Supplying, installation, testing & commissioning of addressable horn cum strobe rated at 90 dBA @ 1m for Audible annunciation and 15cd minimum flashing at 1 Hz for visual indication complete as required.etc.complete as per specifications as per the engineer-incharge approval.

Supplying, installation, testing & commissioning of addressable Response indicator for all detectors located above false ceiling complete as required etc.complete as per specifications as per the engineer-incharge approval.

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the SIPCOT Officer.s

Public Address System

Supply, Installation, testing and commissioning of 480W, PA Booster Amplifier with necessary accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of 240W, PA Booster Amplifier with necessary accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of Cordless Mic UHF necessary accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of Portable 9U Rack with necessary mounting arrangments etc., complete complying with standard specification.

Supply, Installation, testing and commissioning of Ceiling Speaker of 15W with necessary mounting arrangments accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, laying, testing and commissioning of 2 Core - 2.5 sq.mm Copper ARMOURED SPEAKER CABLE etc. complete complying with standard specification as per the approval of site engineer incharge.

Lightning protection System

Supply, and installation of 2mtr length Air termination rod 16/ 10 mm( Lightning rod) with necessary mounting accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of Lightning counter - LCD display and battery etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of S.S test joint kit with required necessary accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply and run of Rust resistant non corrosive 10 mm dia Copper Bonded Steel round conductor for Earth termination with necessary clamps/supports on wall/floor/ground for earth connection etc., complete complying with standard specification as per the approval of site engineer incharge.

Providing Maintenance Free earthing with Copper rod of 17.2 mm dia and 3m length for earth connection with earth conductors etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply and run of 25mm X 6mm GI strip with necessary clamps/supports on wall/floor/ground for earth connection etc., complete complying with standard specification as per the approval of site engineer incharge.

CCTV surveillance system

Supply, installation, testing, commissioning of 5MP(2560×1920 Pixel) IP Bullet camera Optical Zoom:12X-16X,Field of View (Degree):more than 90-105, Focal length:3.3 mm – 10.2 mm suitable for indoor application, Smart Analytics, IR illumination Range(meter): 30M, Supported Protocols:HTTP,HTTPS,DNS,DDNS,TCP/IP,IPv4,IPv6,IEEE 802.1 all inclusive necessary supports for installation completion as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of 5MP(2560×1920 Pixel)5MP Varifocal Motorized Dome IP Camera ,30m IR, Micro SD Optical Zoom:12X-16X,Field of View (Degree):more than 110-130, Focal length:3.3 mm – 10.2 mm suitable for indoor application, Smart Analytics, Supported Protocols:HTTP,HTTPS,DNS,DDNS,TCP/IP,IPv4,IPv6,IEEE 802.1 all inclusive necessary supports for installation completion as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make 16 Channel Network Video Recorder (NVR), Digital Sentry Network Video storage server, including all accessories as required for satisfactory completion as per the recommended and approved by the SIPCOT Officer.

Supply of approved make 8TB HDD as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make 8 Port POE Switch as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of Rack Mountable 24 port Patch Panels with SC and LC connector as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make Patch Cord 1M as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of Fiber Patch Panel 12 Port as per the recommended and approved by the SIPCOT Officer.

Supply installation testing and commissioning of 59.5-61.5 CM LED display with necessary mounting arrangements for CCTV monitoring as per the recommended and approved by the SIPCOT Officer.

Supplying and fixing of 20 Metre HDMI Cable with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply, laying, commissioning and testing of CAT 6A UTP Unarmoured Cable through 25mm PVC conduit .or as per the approval of site engineer incharge. painting of suitable colour etc.complete as directed and approved by engineer in charge.

VRF System

HVAC panel: Design, manufacture, supply, erection, testing and commissioning of main Power panel suitable for 415Volts 3Phase 4wire system, indoor/outdoor installation, made up of CRCA sheet steel of thickness not less than 2 mm with a weather proof canopy of top, double door construction, IP 55 protection, anti corrosive chemical resistant paint dust & vermin proof, cubicle type, floor mounted, undrilled gland plates at top / bottom, complete with internal wiring, ferrules, name plates, Locking System with heat shrinkable colour coded sleeve with SMC Bus bar supports with aluminium Busbar 400A, 50 kA, TPN 50 Hz, bus bars . The Panel should be fully comply to IEC 61439 part 1 & 2 of type tested assembly with incomer : 1 Nos - 400A, 4P, 50kA MCCB Microprocessor based releases (with Over current / Earth fault / Short circuit ) & Trip & close Coil feature with earthing, door interlock, automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming & outgoing cable sides of the circuit breaker metering for each Incomer and out goings: Load Manager with RS485 Interface with Maximum Demand Indication + controller, automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming & outgoing cable sides of the circuit breaker with associated protections MCB's, R,Y,B Phase Indicating lamps and control circuit as required and energy meter for out going feeders etc. Out going: 100A 4P Microprocessor based MCCB- 13Nos 63A MCCB, 4P-7Nos 63A MCB, 4P-2Nos with digital multifunctional meter with RS485 port and suitable CT etc. including concrete pedestal and associated civil works etc. complete and as approved and directed by SIPCOT Officer.

HVAC PDB : ( IDU supply) Supply and fixing of 8 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 24 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only with label holder and provisions for taking up cable for size upto 35 sq.mm.etc. complete as directed and approved by engineer incharge.

Supplying, Installation, testing and commissioning of VRF 4 Way Cassette Indoor Unit ceiling mounting type , 4TR ( Not less than 48000BTU/hr), , 3 phase A.C. Units, with BEE star rating of above 3star. The unit shall have cordless remote controller with LCD display to display the various parameters and to operate the Cassette AC unit . The ceiling unit shall be extremely quiet in operation, the air louvers shall have auto swing facility to distribute cool air uniformly. Integrated drain pump shall be provided with the ceiling unit so as to drain the condensed water effectively without damaging the false ceiling. Insulation, Copper Piping & Cabling, Drain Piping etc. will be as per the site actuals requirements etc. supply and fixing of supports to fix the unit, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply and fixing of 32A 200/250V 2P+E SocketsFlush type and 32A DP MCB complete set with earth connection with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting etc.complete as directed and approved by engineer in charge.

Supply and laying of 3 core 4sq.mm 1100V PVC Copper Armoured Under Ground cable with ISI mark with supply and clamping including transport charges of UG cables in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting etc.complete as directed and approved by engineer in charge.

Supplying, Installation, testing and commissioning of VRF out door unit of 17 TR for multiple numbers of ceiling mounting type Cassette Indoor Unit with refrigerant piping work follows the indoor unit and outdoor unit installation the foundation and vibration-proof rubbers to directly support the bottom surface of the fixing leg that is in contact with the bottom plate of the outdoor unit decrease the operating noise or vibration of the outdoor unit & does not cause any drainage problem with discharged water.Fix the base firmly with anchor bolts (M10) to prevent it from collapsing. Insulation, Copper Piping & Cabling, Drain Piping etc. will be as per the site actuals requirements etc. supply and fixing of supports to fix the unit, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply and laying of the following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc. complete and as directed by SIPCOT Officer..

3.5 core x 240 sq.mm. Ar. Alu. UG cable

3.5 core x 35 sq.mm. Ar. Alu. UG cable

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete and as directed by SIPCOT Officer..

3.5 core x 240 sq.mm. Ar. Alu. UG cable

3.5 core x 35 sq.mm. Ar. Alu. UG cable

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc. complete and as directed by SIPCOT Officer..

3.5 core x 240 sq.mm. Ar. Alu. UG cable

3.5 core x 35 sq.mm. Ar. Alu. UG cable

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer..

Supply and run of 50mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply and run of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply and run of 1 of No.8 SWG GI wire for earth connection with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply & laying of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height Ladder type cable tray inside the electrical room etc. complete as directed and approved by engineer incharge and as directed by SIPCOT Officer..

Machinery Equipment power supply work

Equipment power panel: Design, manufacture, supply, erection, testing and commissioning of main Power panel suitable for 415Volts 3Phase 4wire system, indoor/outdoor installation, made up of CRCA sheet steel of thickness not less than 2 mm with a weather proof canopy of top, double door construction, IP 55 protection, anti corrosive chemical resistant paint dust & vermin proof, cubicle type, floor mounted, undrilled gland plates at top / bottom, complete with internal wiring, ferrules, name plates, Locking System with heat shrinkable colour coded sleeve with SMC Bus bar supports with aluminium Busbar 800A, 50 kA, TPN 50 Hz, bus bars . The Panel should be fully comply to IEC 61439 part 1 & 2 of type tested assembly with incomer : 1 Nos - 800A, 4 Pole 50kA, Microprocessor Based, EDO AIR CIRCUIT BREAKER (with Over current / Earth fault / Short circuit ) & Trip & close Coil feature with earthing, door interlock, automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming & outgoing cable sides of the circuit breaker metering for each Incomer and out goings: Load Manager with RS485 Interface with Maximum Demand Indication + controller, automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming & outgoing cable sides of the circuit breaker with associated protections MCB's, R,Y,B Phase Indicating lamps and control circuit as required and energy meter for out going feeders etc. Out going: 160A 4P Microprocessor based MCCB- 5 Nos 100A 4P Microprocessor based MCCB- 10 Nos 63A MCCB, 4P-8 Nos with digital multifunctional meter with RS485 port and suitable CT etc. including concrete pedestal and associated civil works etc. complete and as approved and directed by SIPCOT Officer.

Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal door) with 1 no. 160A 4P MCCB switch as incoming and 8nos. 40A 4P MCB as outgoing with suitable cable end box in flush with wall with earth connection etc. complete as directed and approved by engineer incharge.

Supply and fixing of 8 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 24 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only with label holder and provisions for taking up cable for size upto 35 sq.mm.etc. complete as directed and approved by engineer incharge.

Supply and fixing of SHEET STEEL ENCLOSURE FOR 4P, MCB with 32A FP MCB complete set with earth connection with painting of Suitable colour with earth connection etc., complete and as directed by SIPCOT SIPCOT Officer..

Supply and fixing of SHEET STEEL ENCLOSURE FOR 4P, MCB with 40A FP MCB complete set with earth connection with painting of Suitable colour with earth connection etc., complete and as directed by SIPCOT SIPCOT Officer..

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge PVC conduit pipe concealed in wall and ceiling with accessories with Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit etc.complete as directed and approved by engineer in charge.

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge PVC conduit pipe concealed in wall and ceiling with accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A/6A 3 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion etc.complete as directed and approved by engineer in charge.

I/C cables

Supply and laying of the following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc. complete and as directed by SIPCOT Officer..

3.5 core x 300 sq.mm. Ar. Alu. UG cable

Supply and laying of the following PVC armoured LTUG cable Supply and clamping including transport charges of UG cables

3.5 core x 50 sq.mm. Ar. Alu. UG cable

From Equipment load panel to Equipment TPN DB

3.5 core x 35 sq.mm. Ar. Alu. UG cable

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete and as directed by SIPCOT Officer..

3.5 core x 300 sq.mm. Ar. Alu. UG cable

3.5 core x 50 sq.mm. Ar. Alu. UG cable

3.5 core x 35 sq.mm. Ar. Alu. UG cable

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc. complete and as directed by SIPCOT Officer..

3.5 core x 300 sq.mm. Ar. Alu. UG cable

3.5 core x 50 sq.mm. Ar. Alu. UG cable

3.5 core x 35 sq.mm. Ar. Alu. UG cable

Out going cablescables

Supply and laying of the following PVC armoured LTUG cable Supply and clamping including transport charges of UG cables

From Equipment load panel to 3 ph Equipment M/C

3.5 core x 25 sq.mm. Ar. Alu. UG cable

From Equipment VTPN DB to 3 ph Equipment M/C ( 32A & 40A)

4 core x 6 sq.mm. Ar. Alu. UG cable

From Equipment TPN DB to 1Ph M/C

Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC Rigid Pipe 25mm (1”) concealed in wall and ceiling with all accessories and continuous earth wire connection of 4 sq. mm copper wire with painting of suitable colour etc.complete as directed and approved by engineer in charge.

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete and as directed by SIPCOT Officer..

3.5 core x 25 sq.mm. Ar. Alu. UG cable

4 core x 6 sq.mm. Ar. Alu. UG cable

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc. complete and as directed by SIPCOT Officer..

3.5 core x 25 sq.mm. Ar. Alu. UG cable

4 core x 6 sq.mm. Ar. Alu. UG cable

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer..

Supply and run of 50mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply and run of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply and run of 1 of No.8 SWG GI wire for earth connection with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply & laying of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height Ladder type cable tray inside the electrical room etc. complete as directed and approved by engineer incharge and as directed by SIPCOT Officer..

Supply and laying of GI Hot Dip Raceways size of 300mm x 38mm including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

SAFETY ACCESSORIES

Supply of 2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS etc. complete and as directed by SIPCOT Officer..

First Aid Box complete with all First Aid Medicines etc. complete and as directed by SIPCOT Officer..

Shock Treatment Chart fixed in glass frame etc. complete and as directed by SIPCOT Officer..

Internal Plumbing

Supplying and fixing of PVC 110mm dia pipe for rain water down fall pipe conforming to IS13592 with ISI mark and fittings conforming to IS 14735, with necessary C I gratings, shoes, bends, offsets, clamps, teak wood plugs, etc., of approved quality including fixing C.I. gratings at the junction of parapet and floor or roof slab, finishing etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

110mm dia

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. (The wash hand basin and specials should be got approved by the SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the SIPCOT SIPCOT Officer. before use on works) Floor Fitting

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the SIPCOT Officer.s. (The urinal should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the SIPCOT SIPCOT Officer. before use on woks)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing in position CP Two Way Bib Cock with Health Faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the SIPCOT SIPCOT Officer. before use on the works)

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the SIPCOT SIPCOT Officer. before use on works)

Construction of Inspection Chamber of inner clear size of 0.60 X 0.60 meters and average depth of 0.75 m with a base concrete of 100 mm thick cement concrete 1:4:8 (One cement, five sand and 8 aggregate) the chamber should be constructed in brick masonry 230 mm thick in cement mortar 1 : 5 using country brick of size 8 ¾ X 4 ¼ X 2 ¼ . The inner side of chamber plaster with cement mortar 1 : 3 -12 mm thick. The chamber top covered with R.C.C. precast slab 1 : 2 : 4 (one cement two sand and four aggregate) 7.5cm thick. The rate is including cost of materials labour etc completed including plastering with C.M. 1:3 -12 mm thick on inner side and top covered with RCC pre cast slab of 7.5 cm thick etc complete complying with standard specification

Supplying and fixing in position 150 X 100mm square mouth 'P' or 'S' trap stoneware Gully trap A grade with castiron gratings of size 150 X 150mm with C.I. air tight cover with frames of size 230 X 230mm at bottom and top respectively laid over a bed of brick jelly cement concrete 1:3:6 150mm thick using 40mm size broken brick jelly including neccessary brick work and plastering and including dismandling masonry wherever necessary and redoing the damaged portions to the original condition and by using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to the stonewere sewer line etc., complete complying with standard specifications (the stonewere gully trap should be got approved by the SIPCOT SIPCOT Officer. before use on works)

Supplying and fixing in position best quality CPVC (Chlorinated Poly Vinyl Chloride) Pipe (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio–11. pressure BIS mark and providing leak proof joints using CPVC adhesives including fixing to the wall with special CPVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including the cost of suitable CPVC specials /GM specials like Elbow, Tee reducers, Plug, union, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., testing for any leakages, etc., complete complying with standard specifications. (The CPVC pipes should be got approved by the SIPCOT SIPCOT Officer. before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

a) 25mm dia Concealed line (Potable and Non Potable water)

b) 32mm dia Concealed line (Potable and Non Potable water)

c) 40mm dia Concealed line (Potable and Non Potable water)

b) 63mm dia Below GL

c) 50mm dia Below GL

e) 25mm dia Below GL

Supplying and fixing the following diaPVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for soil line with relevant specials confirming to IS 14735 including jointing with seal ring confirming to IS 5382 with leaving a gap about 10mm to allow thermal expansion, fixing the pipes into walls with necessary wooden plug, screws, holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete in all respects and as directed by the SIPCOT SIPCOT Officer.

a) 110mm dia

b) 75mm dia

c) 50mm dia

d) 40mm dia

Supplying and fixing Polished Marble slab of size 1.22x0.61m, 18mm thick for urinal partition etc., as directed by SIPCOT SIPCOT Officer.

Providing and fixing of stainless steel toilet paper holder with necessary accessories ..etc complete as directed by SIPCOT SIPCOT Officer. .

Internal Firefighting System

Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s.

Stilt Floor

First Floor

Second Floor

Third Floor

Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s. (Above Ground)

150mm dia

100mm dia

80 mm dia

Supply, erection, testing and commissioning of GI Pipes for Sprinkler system

65mm dia

50mm dia

40mm dia

32mm dia

25mm dia

Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s.

150mm dia

Supply, erection, testing and commissioning of Gun Metal Gate Valve (Heavy Duty)

65mm dia

Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.

100mm dia

NON-RETURN VALVES

Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s.

150 mm dia

Internal Hydrant

Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the SIPCOT Officer.s.

Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s.

Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s.

Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the SIPCOT Officer.s. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the SIPCOT Officer.s.

Extinguisher System

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the SIPCOT Officer.s. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Admin Building

Stilt Floor

First Floor

Second Floor

Third Floor

Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. (Electrical room on each floor) with Bucket Stand as per standard specifications and as directed by the SIPCOT Officer.s.

CUSTOMS AND SECURITY OFFICE

Clearing light Jungle on road side including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness..etc., all complete in all respects complying with relevant standard specification as directed by the SIPCOT Officer.s.

Providing Pre – Constructional Anti – Termite Treatment and creating a Chemical Barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, footings, column pits, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. Retaining / side walls, external perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining / side walls etc. as per instructions of chemical manufacturer and all as directed. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification.

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers. (including refilling)

a) 0 to 2 m depth

b) 2 to 3m depth

Supplying and filling in foundation and basement with Stone dust/Quarry dust in layers of 150 mm thickness well watered ramming, consolidation etc. complete as per standard specifications and as directed by SIPCOT officers

Providing Plain Cement Concrete 1:4:8(One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with standard specifications and as directed by "SIPCOT" officers. (in all heights and all depths)

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and as directed by SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

Below 1.50 m to 4.50 m depth from GL

Upto 1.50 m below GL && up to plinth level- foundtion and basement

Ground floor (0 to 4.5m)

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

a) For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete

b) For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works. (0-3 m)

c) For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by "SIPCOT" officers. (The steel rods must be Fe 500 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

Refilling with excavated soil (other than sand) complying with standard specification for filling in foundation and basement.

Brick work in Cement Mortar 1:5 (One part Cement and five part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Founation and basement

Brick work in Cement Mortar 1:6 (One part Cement and six part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Ground floor

Providing brick masonry partition wall 115 mm thick using II class ground moulded chamber burnt bricks of size 9" x 4.5" x 3" in cm 1:4 (one cement and four M sand ) including supplying and providing 2 nos. of 6 mm dia hoop reinforcement at every 4th layer, curing, raking out of the joints etc., complete compiling with standard specification.

Ground floor

Plastering with cement mortar 1:5 (One of cement and five of M sand) 12 mm thick finished with neat cement including, providing band cornice, ceiling cornice scaffolding curing etc., complete complying with standard specification and as directed by SIPCOT officers.

Plastering in C.M 1:3 (one of cement and three of M sand) 10 mm thick for bottom of sunshade, ceiling in all floors, including scaffolding, curing, finishing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting two coats of newly plastered External wall surface with ready mixed Weather proof Exterior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting the new walls (Interior ) with two coats of approved cement paint in addition to one coat of approved primer over cement plastered wall surfaces etc. including cost of cement paint, brushes, etc., complete complying with standard specification and as directed by SIPCOT officers. (paints and its shade shall be got approved from the SIPCOT official before using)

White washing Two coat with freshly burnt white shell lime in all floors including cost of lime, blue powder, fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s.

Supplying and laying of ceramic tiles anti-skid 305 x 305 x 6 mm of approved special quality laid in cement mortar 1:3 (One of cement and three of sand) 20 mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc all complete in all respects complying with relevant specification and as directed by engineer in charge. Note: (The colour and quality shall be approved from the Engineer before use)

Dadooing for walls Supplying and fixing in position of colour glazed designed wall tiles of any size 6 mm thickness laid in cement mortar 1:2 (One of cement and two of sand) 10 mm thick for wall facing / duding, skirting over the plastered surfaces including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the Engineer in charge. Note: (The colour make and quality shall be approved from the Engineer before use)

Dadooing for walls Supplying and fixing in position of colour glazed / matt finish designed wall tiles (for elevation) of any size 600 x 300 x10 mm thickness laid in cement mortar 1:2 (One of cement and two of sand) 10 mm thick for wall facing / duding, skirting over the plastered surfaces including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the Engineer in charge. Note: (The colour make and quality shall be approved from the Engineer before use)

Supplying and fixing of Double Charged Vitrified Tiles 800 x 800 x 10mm of best approved quality and colour laid in cement mortar 1:3 (One of cement and three of sand) 20 mm thick and pointed with coloured cement neatly including cutting to the required size and shape wherever necessary finishing neatly etc. all complete complying with relevant standard specification and as directed by the Engineer in charge. (The colour and quality of the tiles should be got approved by the Engineer before use)

Paving the floor with best approved quality fine polished Sinthetic Grey, Paradise and similar varieties granite stone slabs of size 1200 x 600 of 18mm to 20mm Thick with machine cut edges laid over a cement mortar bed of 20 mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with matching colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Engineer concerned before use on work, etc., complete as per standard specification.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding,grinding, polishing, conveyance, electrical charges, etc.complete

Weathering course with broken brick jelly lime concrete using 40 to 20 mm gauge broken brick jelly in pure slaked lime (no sand) over roof slab to the proportion of brick jelly to lime (fat lime) being 32 : 12 1 /2 by volume well beaten with wooden beaters, for giving the required slope and thickness including laying and finishing, etc, all complete complying with standard specifications and as directed by "SIPCOT" officers

Finishing the top of roof slab with one course of hydraulically pressed tile of approved superior quality of size 23 cm x 23 cm, 20 mm thick laid over weathering course in cement mortar 1:3 (One of cement and three of M sand) 12 mm thick, mixed with water proofing compound at 2% by weight of cement used and pointed neatly with the same cement mortar mixed with water proofing compound including curing etc., complete in all respects complying with relevant standard specifications and as directed by the engineer in charge. (Note: Tiles to be got approved by the SIPCOT SIPCOT Officer. before use and only one particular size pressed tiles should be used for one type of building)

Supplying and fixing Solid panel PVC door with frame using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter etc., all complete complying with standard specification as directed by the SIPCOT Officer.

Supplying and fixing of wrought and put up in position of frames inclusive of fixing holdfasts for doors, windows and ventilators etc.

a) 0 to 2m length

b) 2 to 3m length

Supplying and fixing of Solid Core Flush Shutters with teakply on both side with teakwook lipping alround 35mm thick with Ornamental Door Handle 200mm long – 2 nos, 5" Butt Hinges – 3 nos, 250mm long and 12mm dia Tower Bolt – 2nos, Mortice Lock With Night latch (Godrej or Equivalent) with required screws with 3 Keys – 1 no, Rubber Bush - 40mm dia – 1no and door stoper 1no vision panel 150x450mm as per drawing etc., cost including all material, labour charges and all hardwar materials etc., all complete complying with standard specification as directed by the SIPCOT Officer.

Flush door shutter size 900x2100 ( Single leaf)

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and fixing mild steel grills for windows, ventilators veranda enclosure, ladder and gate as per the design approved including one coat of primer and labour for fixing in position etc, all complete complying with standard specifications and as directed by "SIPCOT" officers. (The design of grill should be got approved from the SIPCOT SIPCOT Officer. before use)

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors excluding cost of priming coat etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.. (The make, quality and colour of paint should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Supply and installation of Anutone (or) Equivalent Brand of Acoustical False Ceiling of Sisoli Serene / Slate Spirts / Slate Polka Mineral Fibre/ GRG Core Ceiling Tiles of size 595 x 595 x 15mm having volume density 270 kgs / m3, weight 4kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. The skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 Cross T with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally skelet CT15 W06 Cross T with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15 W12 Cross T in direction parallel to the Main T15 to result in 600 x 600mm module. Sisoli Serene / Slate Spirts / Slate Polka of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. The systems to achieve noise reduction coefficient not less than 0.5 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, Scaffolding, transportation, conveyance, etc., complying to standard speciation.

Supplying and fixing of 12mm thick toughened frosted/plain glass with top patch, bottom patch, corner lock and SS H type handle 500mm long with required screws, Double Acton Hydraulic Floor Spring and imported SS finish in dobule leaf door including labour charges and other fitting, door beading with standard specification, door for all size and floors etc all complete and as directed by the SIPCOT Officer.s. Dobule leaf Door size 2.00 x 2.10m

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the SIPOCT SIPCOT Officer. before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the SIPCOT SIPCOT Officer. before use on work

Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10 cm to 13 cm dia including cross bracing etc. complete complying with standard specifications and as directed by "SIPCOT" officers.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete complying with standard specifications and as directed by "SIPCOT" officers.

Labour chrges for Nosing in Granite Slab (Double Nosing) including hire charges for machnery, tools and plants etc. complete complying with standard specifications and as directed by "SIPCOT" officers.

Paving the floor with best approved quality fine polished Flamed Steel Grey Granite Slab 1200mm x 600mm, 16mm to 18mm Thick with machine cut edges laid over a cement mortar bed of 20 mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with matching colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Engineer concerned before use on work, etc. complete complying with standard specifications and as directed by "SIPCOT" officers.

Labour chrges for Grooving the Granite Slab including hire charges for machnery, tools and plants etc. complete complying with standard specifications and as directed by "SIPCOT" officers.

Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied @ 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, includinga prime coat of solvent free, medium viscous, epoxy primer @0.2L/m2 and protection with 120gsm Geotextile over the 7 days cured waterproofing membrane. The Waterproofing material shall have Solids > 85%,Tensile strength >2 Mpa as per ASTM D 412, Elongation at break >400% confirms to ASTM C 1305 for crack bridging ability (no cracks up to 3.2mm) Shore A Hardness >55 as per ASTM D 2240, Adhesion to peel after water immersion as per ASTM C 794 at 5.2N. Resistance to root penetration as per UNE CN/ TS 14416. The finished cost to include surface preparation,making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 60gsm Geo-textile over the angle fillet when the first coat in still wet, treatment of cracks and laying 120GSM Geo-textile as seperation/protective layer over the fully cured PU coating completely as per specification.( W-0303) etc. complete complying with standard specifications and as directed by "SIPCOT" officers.

Internal Electrifcation

ELDB SPNDB: Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only etc.complete as directed and approved by engineer in charge.

1 PHASE UPS: Supply erection, testing, commissioning of 1 PHASE, 3 KVA, UPS WITH BATTERY - 1 HOUR BACKUP with earth connection etc.complete as directed and approved by engineer in charge.

Change over switch: Supply and fixing of 16 Amps Change Over Switch on suitable angle iron frame work with MS cable entry boxes for incoming and outgoing earthing etc.complete as directed and approved by engineer in charge.

Distribution Board LPDB : Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing in flush with wall with earthconnection only with label holder and provisions for taking up cable for size upto 35 sq.mm.etc. complete as directed and approved by engineer incharge / .

LT Cable and End Termination

Supply and laying of the following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc. complete and as directed by SIPCOT Officer..

From LT panel ( admin building) to L&PDB

3.5 core x 35 sq.mm. Ar. Alu. UG cable

3 core x 6 sq.mm. FLEXIBLE COPPER CABLE

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete and as directed by SIPCOT Officer..

3.5 core x 35 sq.mm. Ar. Alu. UG cable

3 core x 6 sq.mm. FLEXIBLE COPPER CABLE

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc. complete and as directed by SIPCOT Officer..

3.5 core x 35 sq.mm. Ar. Alu. UG cable

3 core x 6 sq.mm. FLEXIBLE COPPER CABLE

Light point wiring

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with Module GI switch box in flush wall with 6A one way mod

Power point wiring with GI box, socket & switch

Wiring with 2 x 2.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe Concealed in wall and ceiling with MS accessories with suitable Module GI switch box in flush wall with 1 no

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with suitable Module GI switch box in flush with wall with 1

For AC point

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with Supply and fixing of 25A Flush type Wall Socket 25A DP M

Supply, installation, testing and commissioning of 1.5 TR Split Type AC Unit - 5 Star Rated with Supply and installation of 4 KVA capacity Automatic Voltage Stabilizer with time delay relay and Supply and fixing of MS stand for fixing outdoor unit, inter

Circuit main wiring

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sq mm copper wire with painting of suitable co

Supply and Run of 2 of 6sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq mm copper wire with painting of suitable colour etc.complete as directed and approved by engineer in charge.

Light Fixtures and fan

Supply, installation, testing and commissioning of 36W LED 2x2 square type Recessed fitting with LED on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of 24W LED Round type Recessed fitting with LED on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer.. ( In Toilet )

Supply, installation, testing and commissioning of MIRROR Light 20W LED Batten inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete with 2 module 100W fan step regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") etc. complete as directed and approved by engineer incharge and as directed by SIPCOT Officer..

supply and fixing of 300mm (12") sweep AC exhaust fan complete with louvers shutters arrangements for 300mm (12") sweep etc complete as directed and approved by engineer incharge etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing & Commisssioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer..

Supply and run of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply and run of 1 of No.8 SWG GI wire for earth connection with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply, laying, commissioning and testing of CAT 6A UTP Unarmoured Cable through 25mm PVC conduit .or as per the approval of site engineer incharge. painting of suitable colour etc.complete as directed and approved by engineer in charge.

Supply and installation of PVC Module Box with Face Plate Single Socket RJ-11/RJ45 back boxes with covers, with the crimping of appropriate jacks and all other necessary accessories telephone points fed through PVC insulated telephone cables inside 25 mm diameter PVC conduits etc., complete complying with standard specifications and as directed by site engineer incharge.

EPABX system

Supply, installation, testing & Commisssioning of 3 Trunk + 16 Analog Extensions. Expandable Up to 96 Analog Extension & 112 IP Port etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commisssioning of Basic Link Card for main system - To connect main system with expansion system. etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commisssioning of Basic Telephone without Caller ID etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commisssioning of Caller ID Telephone with Speaker etc. complete and as directed by SIPCOT Officer..

Supply, Installation, commissioning, testing of Media converter for OFC cable etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, Installation, commissioning, testing of LAN NETWORK SWITCHES -24 Port etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, laying, commissioning and testing of telephone cables through 25mm PVC conduit .or as per the approval of site engineer incharge.

Supply and installation of PVC Module Box with Face Plate Single Socket RJ-11/RJ45 back boxes with covers, with the crimping of appropriate jacks and all other necessary accessories telephone points fed through PVC insulated telephone cables inside 25 mm diameter PVC conduits etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, installation,9U Rack- RACK WITH ACCESSORIES inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Solar Rooftop

Solar Rooftop:Supply, erection, testing, commissioning of Solar PV rooftop On Grid comprising of followings,i) Solar panels of type Mono Crystline, PERC, etc.ii) Power Conditioning Unit (PCU)with MPPT, Inverter, Controls, Protection Devices, Interconnecting D.C. cables,Connectors, Junction Boxes and accessories.iii) D.C. D.Biv) A.C. D.Bv) A.C. cables and accessoriesvi) Lightning arrestor, earthing, etc.vii) Module Metallic Mounting Structuresviii) Installation, Testing and Commissioning corresponds to BIS and IEC requirementsetc.complete as directed and approved by engineer in charge.

Internal CCTV

Supply, installation, testing, commissioning of 5MP(2560×1920 Pixel) IP Bullet camera Optical Zoom:12X-16X,Field of View (Degree):more than 90-105, Focal length:3.3 mm – 10.2 mm suitable for indoor application, Smart Analytics, IR illumination Range(meter

Supply, installation, testing, commissioning of 5MP(2560×1920 Pixel)5MP Varifocal Motorized Dome IP Camera ,30m IR, Micro SD Optical Zoom:12X-16X,Field of View (Degree):more than 90-105, Focal length:3.3 mm – 10.2 mm suitable for indoor application, Smart Analytics, Supported Protocols:HTTP,HTTPS,DNS,DDNS,TCP/IP,IPv4,IPv6,IEEE 802.1 all inclusive necessary supports for installation completion as per the recommended and approved by the iSIPCOT Officer.

Supply, installation, testing, commissioning of approved make 20 Channel Network Video Recorder (NVR), Digital Sentry Network Video storage server, including all accessories as required for satisfactory completion as per the recommended and approved by the iSIPCOT Officer.

Supply of approved make 8TB HDD as per the recommended and approved by the iSIPCOT Officer.

Supply, installation, testing, commissioning of approved make 8 Port POE Switch as per the recommended and approved by the iSIPCOT Officer.

Supply, installation, testing, commissioning of Rack Mountable 24 port Patch Panels with SC and LC connector as per the recommended and approved by the iSIPCOT Officer.

Supply, installation, testing, commissioning of approved make Patch Cord 1M as per the recommended and approved by the iSIPCOT Officer.

Supply installation testing and commissioning of 59.5-61.5 CM LED display with necessary mounting arrangements for CCTV monitoring as per the recommended and approved by the iSIPCOT Officer.

Supplying and fixing of 20 Metre HDMI Cable with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply, laying, commissioning and testing of CAT 6A UTP Unarmoured Cable through 25mm PVC conduit .or as per the approval of site engineer incharge. painting of suitable colour etc.complete as directed and approved by engineer in charge.

Fire Alarm System

Supplying, installation, testing and commissioning of micro processor based intelligent Single Loop Panel Addressable Fire Alarm Control Panel consists of display board which will have 160 Character Display with Touch key pad, Mother board 32 Bit Processo

Supplying, installation, testing & commissioning of Addressable Multi detector with base with Binary coded address setting Dual LED’s for 360° visibility etc.complete as per specifications as per the engineer-incharge approval.

Supplying, installation, testing & commissioning of addressable manual call point Resettable type - with back box with Binary coded address setting with Status LED for 360° visibility complete as require etc.complete as per specifications or as per the engineer-incharge approval.

Supplying, installation, testing & commissioning of addressable horn cum strobe rated at 90 dBA @ 1m for Audible annunciation and 15cd minimum flashing at 1 Hz for visual indication complete as required.etc.complete as per specifications as per the engineer-incharge approval.

Supplying, installation, testing & commissioning of addressable Response indicator for all detectors located above false ceiling complete as required etc.complete as per specifications as per the engineer-incharge approval.

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the SIPCOT Officer.s

Lightning Protection System

Supply, and installation of 1.2mtr length Air termination rod 16/ 10 mm( Lightning rod) with necessary mounting accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of Lightning counter - LCD display and battery etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of S.S test joint kit with required necessary accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply and run of 25mm X 6mm GI strip with necessary clamps/supports on wall/floor/ground for earth connection etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply and run of Rust resistant non corossive 10 mm dia Copper Bonded Steel round conductor for Earth termination with necessary clamps/supports on wall/floor/ground for earth connection etc., complete complying with standard specification as per the approval of site engineer incharge.

Providing Maintenance Free earthing with Copper rod of 17.2 mm dia and 3m length for earth connetion with earth conductors etc., complete complying with standard specification as per the approval of site engineer incharge.

Public address System

Supply, Installation, testing and commissioning of 240W PA Mixer Amplifer with necessary accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of Cordless Mic UHF necessary accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of Ceiling Speaker of 20W with necessary mounting arrangments accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, laying, testing and commissioning of 2 Core - 2.5 sq.mm Copper ARMOURED SPEAKER CABLE etc. complete complying with standard specification as per the approval of site engineer incharge.

Internal Plumbing

Supplying and fixing of PVC 110mm dia pipe for rain water down fall pipe conforming to IS13592 with ISI mark and fittings conforming to IS 14735, with necessary C I gratings, shoes, bends, offsets, clamps, teak wood plugs, etc., of approved quality including fixing C.I. gratings at the junction of parapet and floor or roof slab, finishing etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

110mm dia

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Supplying and fixing in position CP Two Way Bib Cock with Health Faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Construction of Inspection Chamber of inner clear size of 0.60 X 0.60 meters and average depth of 0.75 m with a base concrete of 100 mm thick cement concrete 1:4:8 (One cement, five sand and 8 aggregate) the chamber should be constructed in brick masonry 230 mm thick in cement mortar 1 : 5 using country brick of size 8 ¾ X 4 ¼ X 2 ¼ . The inner side of chamber plaster with cement mortar 1 : 3 -12 mm thick. The chamber top covered with R.C.C. precast slab 1 : 2 : 4 (one cement two sand and four aggregate) 7.5cm thick. The rate is including cost of materials labour etc completed including plastering with C.M. 1:3 -12 mm thick on inner side and top covered with RCC pre cast slab of 7.5 cm thick etc complete complying with standard specification

Supplying and fixing in position 150 X 100mm square mouth 'P' or 'S' trap stoneware Gully trap A grade with castiron gratings of size 150 X 150mm with C.I. air tight cover with frames of size 300 X 300mm at bottom and top respectively laid over a bed of brick jelly cement concrete 1:3:6 150mm thick using 40mm size broken brick jelly including neccessary brick work and plastering and including dismandling masonry wherever necessary and redoing the damaged portions to the original condition and by using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to the stonewere sewer line etc., complete complying with standard specifications (the stonewere gully trap should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position best quality CPVC (Chlorinated Poly Vinyl Chloride) Pipe (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio–11. pressure BIS mark and providing leak proof joints using CPVC adhesives including fixing to the wall with special CPVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The CPVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

a) 25mm dia Concealed line

b) 25mm dia Below GL

Supplying and fixing in position best quality P.V.C soil/waste pipes of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standards (the P.V.C. pipes sholud be got approved by the Executive Engineer before use on works)

a) 110mm dia

b) 75mm dia

c) 40mm dia

Supplying and fixing Polished Marble slab of size 1.22x0.61m, 18mm thick for urinal partition etc., as directed by SIPCOT SIPCOT Officer.

Providing and fixing of stainless steel toilet paper holder with necessary accessories ..etc complete as directed by SIPCOT SIPCOT Officer. .

Firefighting System

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the SIPCOT Officer.s. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

MEDICAL FACILITY CENTRE

Clearing light Jungle on road side including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness..etc., complete complying with standard specification and as directed by the SIPCOT officers.

Providing Pre – Constructional Anti – Termite Treatment and creating a Chemical Barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, footings, column pits, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. Retaining / side walls, external perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining / side walls etc. as per instructions of chemical manufacturer and all as directed. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification. etc., complete complying with standard specification and as directed by the SIPCOT officers.

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc., complete complying with standard specification and as directed by the SIPCOT officers.. (including refilling)

a) 0 to 2 m depth

b) 2 to 3m depth

Supplying and filling in foundation and basement with Stone dust/Quarry dust in layers of 150 mm thickness well watered ramming, consolidation etc., complete complying with standard specification and as directed by the SIPCOT officers.

Providing Plain Cement Concrete 1:4:8(One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with etc., complete complying with standard specification and as directed by the SIPCOT officers. (in all heights and all depths)

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS etc., complete complying with standard specification and as directed by the SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

Foundation & Basement

Ground floor

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

a) For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works

b) For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works. (0-3 m)

c) For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc., complete complying with standard specification and as directed by the SIPCOT officers. (The steel rods must be Fe 500 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

Brick work in Cement Mortar 1:5 (One part Cement and five part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Founation and basement

Brick work in Cement Mortar 1:6 (One part Cement and six part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Ground floor

Providing brick masonry partition wall 115 mm thick using II class ground moulded chamber burnt bricks of size 9" x 4.5" x 3" in cm 1:4 (one cement and four M sand ) including supplying and providing 2 nos. of 6 mm dia hoop reinforcement at every 4th layer, curing, raking out of the joints etc., complete compiling with standard specification.

Ground floor

Plastering with cement mortar 1:5 (One of cement and five of M sand) 12 mm thick finished with neat cement including, providing band cornice, ceiling cornice scaffolding curing etc., complete complying with standard specification and as directed by SIPCOT officers.

Plastering in C.M 1:3 (one of cement and three of M sand) 10 mm thick for bottom of sunshade, ceiling in all floors, including scaffolding, curing, finishing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting two coats of newly plastered External wall surface with ready mixed Weather proof Exterior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting two coats of newly plastered internal wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

White washing Two coat with freshly burnt white shell lime in all floors including cost of lime, blue powder, fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s.

Supplying and laying of ceramic tiles anti-skid 305 x 305 x 6 mm of approved special quality laid in cement mortar 1:3 (One of cement and three of sand) 20 mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc all complete in all respects complying with relevant specification and as directed by engineer in charge. Note: (The colour and quality shall be approved from the Engineer before use)

Dadooing for walls Supplying and fixing in position of colour glazed designed wall tiles of any size 6 mm thickness laid in cement mortar 1:2 (One of cement and two of sand) 10 mm thick for wall facing / duding, skirting over the plastered surfaces including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the Engineer in charge. Note: (The colour make and quality shall be approved from the Engineer before use)

Designing the Semi Unitised Structural Glazing System with open groove joint as per design intent, preparation of shop drawings for approval, supply, fabricate, erect as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by the Dept. SIPCOT Officer..) Design the framing system (i.e. male & Female frame) to support vision panels, spandrel panels either with glass or aluminium composite panel, openable, window panels on a continuous framing supported between floors. Also design the split framing unutilized glazing system in case of strip or punched windows with vision panel proposed with either insulated / Monolithic glass, groove width in the system both in horizontal and vertical shall not be more than 20mm. Glazing of panel shall be done only at factory at the controlled atmosphere etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying and fixing of Double Charged Vitrified Tiles 800 x 800 x 10mm of best approved quality and colour laid in cement mortar 1:3 (One of cement and three of sand) 20 mm thick and pointed with coloured cement neatly including cutting to the required size and shape wherever necessary finishing neatly etc. all complete complying with relevant standard specification and as directed by the Engineer in charge. (The colour and quality of the tiles should be got approved by the Engineer before use)

Paving the floor with best approved quality fine polished Steel Grey granite stone slabs of size 1200 x 600 of 16mm to 18mm Thick with machine cut edges laid over a cement mortar bed of 20 mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with matching colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Engineer concerned before use on work, etc., complete as per standard specification.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding,grinding, polishing, conveyance, electrical charges, etc.complete

Weathering course with broken brick jelly lime concrete using 40 to 20 mm gauge broken brick jelly in pure slaked lime (no sand) over roof slab to the proportion of brick jelly to lime (fat lime) being 32 : 12 1 /2 by volume well beaten with wooden beaters, for giving the required slope and thickness including laying and finishing, etc, all complete complying with standard specifications and as directed by "SIPCOT" officers

Finishing the top of roof slab with one course of hydraulically pressed tile of approved superior quality of size 23 cm x 23 cm, 20 mm thick laid over weathering course in cement mortar 1:3 (One of cement and three of M sand) 12 mm thick, mixed with water proofing compound at 2% by weight of cement used and pointed neatly with the same cement mortar mixed with water proofing compound including curing etc., complete in all respects complying with relevant standard specifications and as directed by the engineer in charge. (Note: Tiles to be got approved by the SIPCOT SIPCOT Officer. before use and only one particular size pressed tiles should be used for one type of building)

Supplying and fixing Solid panel PVC door with frame using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter etc., all complete complying with standard specification as directed by the SIPCOT Officer.

Supplying and fixing of wrought and put up in position of frames inclusive of fixing holdfasts for doors, windows and ventilators etc.

a) 0 to 2m length

b) 2 to 3m length

Supplying and fixing of Solid Core Flush Shutters with teakply on both side with teakwook lipping alround 35mm thick with Ornamental Door Handle 200mm long – 2 nos, 5" Butt Hinges – 3 nos, 250mm long and 12mm dia Tower Bolt – 2nos, Mortice Lock With Night latch (Godrej or Equivalent) with required screws with 3 Keys – 1 no, Rubber Bush - 40mm dia – 1no and door stoper 1no vision panel 150x450mm as per drawing etc., cost including all material, labour charges and all hardwar materials etc., all complete complying with standard specification as directed by the SIPCOT Officer.

Flush door shutter size 900x2100 ( Single leaf)

Flush door shutter size 1200 x 2100 ( Single leaf)

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and fixing mild steel grills for windows, ventilators veranda enclosure, ladder and gate as per the design approved including one coat of primer and labour for fixing in position etc, all complete complying with standard specifications and as directed by "SIPCOT" officers. (The design of grill should be got approved from the SIPCOT SIPCOT Officer. before use)

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors excluding cost of priming coat etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.. (The make, quality and colour of paint should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Supply and installation of Anutone (or) Equivalent Brand of Acoustical False Ceiling of Sisoli Serene / Slate Spirts / Slate Polka Mineral Fibre/ GRG Core Ceiling Tiles of size 595 x 595 x 15mm having volume density 270 kgs / m3, weight 4kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. The skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 Cross T with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally skelet CT15 W06 Cross T with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15 W12 Cross T in direction parallel to the Main T15 to result in 600 x 600mm module. Sisoli Serene / Slate Spirts / Slate Polka of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. The systems to achieve noise reduction coefficient not less than 0.5 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, Scaffolding, transportation, conveyance, etc., complying to standard speciation.

Supplying and fixing of 12mm thick toughened frosted/plain glass with top patch, bottom patch, corner lock and SS H type handle 500mm long with required screws, Double Acton Hydraulic Floor Spring and imported SS finish in dobule leaf door including labour charges and other fitting, door beading with standard specification, door for all size and floors etc all complete and as directed by the SIPCOT Officer.s.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the SIPOCT SIPCOT Officer. before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the SIPCOT SIPCOT Officer. before use on work

Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10 cm to 13 cm dia including cross bracing etc. complete complying with standard specifications and as directed by "SIPCOT" officers.

Manufacturing, Supplying and Fixing of Stainless Steel Handrails for staircase near wet riser using 50mm Dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm Dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall include for grouting into concrete with necessary supporting arrangements the handrail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete

Labour charges for Grooving the Granite Slab including hire charges for machinery, tools and plants etc all complete

Paving the floor with best approved quality fine polished Flamed Steel Grey Granite Slab 1200mm x 600mm, 16mm to 18mm Thick with machine cut edges laid over a cement mortar bed of 20 mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with matching colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Engineer concerned before use on work, etc., complete as per standard specification.

Labour charges for Grooving the Granite Slab including hire charges for machinery, tools and plants etc all complete

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the SIPCOT Officer.

Supply and fixing of Cladding sheets out of 0.47 mm TCT coated galvalume sheets, rate including all materials, labour charges, scaffolding, staging, transportation, lead & Lifts, wastage, etc,. No separate payment made for bolts, nuts, self driving screws, washers, welding etc.., all complete, as directed by the SIPCOT Officer.s.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Supplying and fixing of PVC Sliding Door with Roller all complete complying with standard specification as directed by the SIPCOT Officer.

Supply of custom-made Glass Fibre Reinforced Concrete (GRC) 20 to 25 mm Thickness. (Single side Finish). The FRC will be made of using 53 grade white Portland cement manufactured by cement or equivalent. Quarty fine silica sand, Alkali resistant glass fibre manufactured by "NEG" Japan or CEMFIL Spain or equivalent. Super plasticizers and polymers manufactured by BASF, sika or equivalent all necessary fasteners and anchor bolts will be used for fixing etc as directed by the SIPCOT Officer.

Supply and Installation of GRC (OCTOGONAL SHAPE) Columns with CAPITAL, Pillar and PEDESTAL, Size: - 400 mm (W) x 5.3 mtr Ht.

Supply and Installation of GRC ELEMENTS, Size: - 0.575 m (W) x 0.475m (HT) x 0.6 m (D) (GRC Brackets)

Handrail

Internal Electrification

Distribution Board LDB : Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A 4P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only with label holder and provisions for taking up cable for size upto 35 sq.mm.6 ways 3 phase DB 40A 4P MCB - 1 no.6A to 32A SP MCB - 18 nos.etc. complete as directed and approved by engineer incharge .

Distribution Board PDB : Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only with label holder and provisions for taking up cable for size upto 35 sq.mm.etc. complete as directed and approved by engineer incharge / .

ELDB SPNDB:Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only etc.complete as directed and approved by engineer in charge.

1 PHASE UPS:Supply erection, testing, commissioning of 1 PHASE, 3 KVA, UPS WITH BATTERY - 1 HOUR BACKUP with earth connection etc.complete as directed and approved by engineer in charge.

Change over switch:Supply and fixing of 16 Amps Change Over Switch on suitable angle iron frame work with MS cable entry boxes for incoming and outgoing earthing etc.complete as directed and approved by engineer in charge.

LT Cable and End Termination

Supply and laying of the following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc. complete and as directed by SIPCOT Officer..

From LT panel to PDB- 1 & 2

3.5 core x 25 sq.mm. Ar. Alu. UG cable

From LT panel to LDB

4 core x 16 sq.mm. Ar. Alu. UG cable

From UPS and ELDB

3 core x 6 sq.mm. FLEXIBLE COPPER CABLE

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete and as directed by SIPCOT Officer..

3.5 core x 25 sq.mm. Ar. Alu. UG cable

4 core x 16 sq.mm. Ar. Alu. UG cable

3 core x 6 sq.mm. FLEXIBLE COPPER CABLE

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc. complete and as directed by SIPCOT Officer..

3.5 core x 25 sq.mm. Ar. Alu. UG cable

4 core x 16 sq.mm. Ar. Alu. UG cable

3 core x 6 sq.mm. FLEXIBLE COPPER CABLE

Light point wiring

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire for and making good of the concealed portion with painting of suitable colour for concealed MS conduit Light point / fan point (for electronic regulator) etc.complete as directed and approved by engineer in charge.

Power point wiring with GI box, socket & switch

Wiring with 2 x 2.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe Concealed in wall and ceiling with MS accessories with suitable Module GI switch box in flush wall with 1 no. 6A one way module switch and 1 no. 6A 5 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit Plug point etc.complete as directed and approved by engineer in charge.

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A/6A 3 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit 15A Plug point etc.complete as directed and approved by engineer in charge.

For AC point

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit etc.complete as directed and approved by engineer in charge.

Supply, installation, testing and commissioning of 1.5 TR Split Type AC Unit - 5 Star Rated with Supply and installation of 4 KVA capacity Automatic Voltage Stabilizer with time delay relay and Supply and fixing of MS stand for fixing outdoor unit, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Circuit main wiring

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sq. mm copper wire with painting of suitable colour etc.complete as directed and approved by engineer in charge.

Supply and Run of 2 of 6sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq. mm copper wire with painting of suitable colour etc.complete as directed and approved by engineer in charge.

Light Fixtures and fan

Supply, installation, testing and commissioning of 36W LED 2x2 square type Recessed fitting with LED on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of 24W LED Round type Recessed fitting with LED on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of 18W LED Round type Recessed fitting with LED on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing and commissioning of 40W (2x20W), 4ft LED tube light fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of MIRROR Light 20W LED Batten inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete with 2 module 100W fan step regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") etc. complete as directed and approved by engineer incharge and as directed by SIPCOT Officer..

supply and fixing of 300mm (12") sweep AC exhaust fan complete with louvers shutters arrangements for 300mm (12") sweep etc complete as directed and approved by engineer incharge etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply and fixing of AC/DC 76mm buzzer/call bell suitable for 230 volts, 50 Hz, single-phase AC supply on a suitable GI back box board with a push switch etc. complete and as directed by SIPCOT SIPCOT Officer..

supply and fixing of 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting with earth connection etc. complete and as directed by SIPCOT Officer..

Supply & laying of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height Ladder type cable tray inside the electrical room etc. complete as directed and approved by engineer incharge and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer..

Supply and run of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply and run of 1 of No 8 SWG GI wire for earth connection with neccery clamos / supports on wall / floor / grpund for wearth connection etc. complete and as directed by SIPCOT Officer..

Supply, laying, commissioning and testing of CAT 6A UTP Unarmoured Cable through 25mm PVC conduit .or as per the approval of site engineer incharge. painting of suitable colour etc.complete as directed and approved by engineer in charge.

Supply and installation of PVC Module Box with Face Plate Single Socket RJ-11/RJ45 back boxes with covers, with the crimping of appropriate jacks and all other necessary accessories telephone points fed through PVC insulated telephone cables inside 25 mm diameter PVC conduits etc., complete complying with standard specifications and as directed by site engineer incharge.

EPABX SYSTEM

Supply, installation, testing & Commissioning of 3 Trunk + 16 Analog Extensions. Expandable Up to 96 Analog Extension & 112 IP Port etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Basic Link Card for main system - To connect main system with expansion system. etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Basic Telephone without Caller ID etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Caller ID Telephone with Speaker etc. complete and as directed by SIPCOT Officer..

Supply, Installation, commissioning, testing of Media converter for OFC cable single mode etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, Installation, commissioning, testing of LAN NETWORK SWITCHES -24 Port etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, laying, commissioning and testing of telephone cables through 25mm PVC conduit .or as per the approval of site engineer incharge.

Supply and installation of PVC Module Box with Face Plate Single Socket RJ-11/RJ45 back boxes with covers, with the crimping of appropriate jacks and all other necessary accessories telephone points fed through PVC insulated telephone cables inside 25 mm diameter PVC conduits etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, installation,9U Rack- RACK WITH ACCESSORIES inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Solar Rooftop

Solar Rooftop:Supply, erection, testing, commissioning of Solar PV rooftop On Grid Plant comprising of followings,i) Solar panels of type Mono Crystalline, PERC, etc.ii) Power Conditioning Unit (PCU)with MPPT, Inverter, Controls, Protection Devices, Interconnecting D.C. cables,Connectors, Junction Boxes and accessories.iii) D.C. D.Biv) A.C. D.Bv) A.C. cables and accessoriesvi) Lightning arrestor, earthing, etc.vii) Module Metallic Mounting Structuresviii) Installation, Testing and Commissioning corresponds to BIS and IEC requirementsetc.complete as directed and approved by engineer in charge.

CCTV surveillance system

Supply, installation, testing, commissioning of 5MP(2560×1920 Pixel) IP Bullet camera Optical Zoom:12X-16X,Field of View (Degree):more than 90-105, Focal length:3.3 mm – 10.2 mm suitable for indoor application, Smart Analytics, IR illumination Range(meter): 30M, Supported Protocols:HTTP,HTTPS,DNS,DDNS,TCP/IP,IPv4,IPv6,IEEE 802.1 all inclusive necessary supports for installation completion as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of 5MP(2560×1920 Pixel)5MP Varifocal Motorized Dome IP Camera ,30m IR, Micro SD Optical Zoom:12X-16X,Field of View (Degree):more than 110-130, Focal length:3.3 mm – 10.2 mm suitable for indoor application, Smart Analytics, Supported Protocols:HTTP,HTTPS,DNS,DDNS,TCP/IP,IPv4,IPv6,IEEE 802.1 all inclusive necessary supports for installation completion as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of 5MP PTZ IP Camera 360 Degree, 200m IR, IP66, Audio In / Out, Alerts, Auto Tracking Optical Zoom:30X,Field of View (Degree):360, suitable for indoor application, Smart Analytics, Supported Protocols: HTTP, HTTPS, DNS, DDNS, TCP/IP, IPv4, IPv6, IEEE 802.1 all-inclusive necessary supports for installation completion as per the recommended and approved by the SIPCOT Officer.

Supply, installation 65mm dia GI pipe (Class 'B') 4mtr height with 300mm x 300mm x 6mm base plate with duly welding (MR), MS box of 30cm x 20cm x 10cm with angle iron framework with lock and key arrangements including Concreting and masonry work for fixing the post all-inclusive necessary supports for installation of CCTV camera etc. completion as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make 16 Channel Network Video Recorder (NVR), Digital Sentry Network Video storage server, including all accessories as required for satisfactory completion as per the recommended and approved by the SIPCOT Officer.

Supply of approved make 8TB HDD as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make 8 Port POE Switch as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of Rack Mountable 24 port Patch Panels with SC and LC connector as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make Patch Cord 1M as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of Fiber Patch Panel 12 Port as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make 4 Port POE Switch with SFP port for CCTV camera as per the recommended and approved by the engineer in- charge.

Supply installation testing and commissioning of 59.5-61.5 CM LED display with necessary mounting arrangements for CCTV monitoring as per the recommended and approved by the SIPCOT Officer.

Supplying and fixing of 20 Metre HDMI Cable with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply, laying, commissioning and testing of CAT 6A UTP Unarmoured Cable through 25mm PVC conduit .or as per the approval of site engineer incharge. painting of suitable colour etc.complete as directed and approved by engineer in charge.

Fire Alarm System

Supplying, installation, testing & commissioning of Addressable Multi detector with base with Binary coded address setting Dual LED’s for 360° visibility etc.complete as per specifications as per the engineer-incharge approval.

Supplying, installation, testing & commissioning of addressable manual call point Resettable type - with back box with Binary coded address setting with Status LED for 360° visibility complete as require etc.complete as per specifications or as per the engineer-incharge approval.

Supplying, installation, testing & commissioning of addressable horn cum strobe rated at 90 dBA @ 1m for Audible annunciation and 15cd minimum flashing at 1 Hz for visual indication complete as required.etc.complete as per specifications as per the engineer-incharge approval.

Supplying, installation, testing & commissioning of addressable Response indicator for all detectors located above false ceiling complete as required etc.complete as per specifications as per the engineer-incharge approval.

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the SIPCOT Officer.s

Public Address System

Supply, Installation, testing and commissioning of 480W, PA Booster Amplifier with necessary accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of Cordless Mic UHF necessary accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of Portable 9U Rack with necessary mounting arrangments etc., complete complying with standard specification.

Supply, Installation, testing and commissioning of Ceiling Speaker of 15W with necessary mounting arrangments accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, laying, testing and commissioning of 2 Core - 2.5 sq.mm Copper ARMOURED SPEAKER CABLE etc. complete complying with standard specification as per the approval of site engineer incharge.

Lightning protection System

Supply, and installation of 2mtr length Air termination rod 16/ 10 mm( Lightning rod) with necessary mounting accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of Lightning counter - LCD display and battery etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of S.S test joint kit with required necessary accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply and run of Rust resistant non corrosive 10 mm dia Copper Bonded Steel round conductor for Earth termination with necessary clamps/supports on wall/floor/ground for earth connection etc., complete complying with standard specification as per the approval of site engineer incharge.

Providing Maintenance Free earthing with Copper rod of 17.2 mm dia and 3m length for earth connection with earth conductors etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply and run of 25mm X 6mm GI strip with necessary clamps/supports on wall/floor/ground for earth connection etc., complete complying with standard specification as per the approval of site engineer incharge.

Internal Plumbing

Supplying and fixing of PVC 110mm dia pipe for rain water down fall pipe conforming to IS13592 with ISI mark and fittings conforming to IS 14735, with necessary C I gratings, shoes, bends, offsets, clamps, teak wood plugs, etc., of approved quality including fixing C.I. gratings at the junction of parapet and floor or roof slab, finishing etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

110mm dia

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. (The wash hand basin and specials should be got approved by the SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the SIPCOT SIPCOT Officer. before use on works) Floor Fitting

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the SIPCOT Officer.s. (The urinal should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the SIPCOT SIPCOT Officer. before use on woks)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing in position CP Two Way Bib Cock with Health Faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the SIPCOT SIPCOT Officer. before use on the works)

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the SIPCOT SIPCOT Officer. before use on works)

Construction of Inspection Chamber of inner clear size of 0.60 X 0.60 meters and average depth of 0.75 m with a base concrete of 100 mm thick cement concrete 1:4:8 (One cement, five sand and 8 aggregate) the chamber should be constructed in brick masonry 230 mm thick in cement mortar 1 : 5 using country brick of size 8 ¾ X 4 ¼ X 2 ¼ . The inner side of chamber plaster with cement mortar 1 : 3 -12 mm thick. The chamber top covered with R.C.C. precast slab 1 : 2 : 4 (one cement two sand and four aggregate) 7.5cm thick. The rate is including cost of materials labour etc completed including plastering with C.M. 1:3 -12 mm thick on inner side and top covered with RCC pre cast slab of 7.5 cm thick etc complete complying with standard specification

Supplying and fixing in position 150 X 100mm square mouth 'P' or 'S' trap stoneware Gully trap A grade with castiron gratings of size 150 X 150mm with C.I. air tight cover with frames of size 230 X 230mm at bottom and top respectively laid over a bed of brick jelly cement concrete 1:3:6 150mm thick using 40mm size broken brick jelly including neccessary brick work and plastering and including dismandling masonry wherever necessary and redoing the damaged portions to the original condition and by using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to the stonewere sewer line etc., complete complying with standard specifications (the stonewere gully trap should be got approved by the SIPCOT SIPCOT Officer. before use on works)

Supplying and fixing in position best quality CPVC (Chlorinated Poly Vinyl Chloride) Pipe (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio–11. pressure BIS mark and providing leak proof joints using CPVC adhesives including fixing to the wall with special CPVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including the cost of suitable CPVC specials /GM specials like Elbow, Tee reducers, Plug, union, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., testing for any leakages, etc., complete complying with standard specifications. (The CPVC pipes should be got approved by the SIPCOT SIPCOT Officer. before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

a) 25mm dia Concealed line

b) 50mm dia Below GL

c) 40mm dia Below GL

d) 32mm dia Below GL

e) 25mm dia Below GL

Supplying and fixing the following diaPVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for soil line with relevant specials confirming to IS 14735 including jointing with seal ring confirming to IS 5382 with leaving a gap about 10mm to allow thermal expansion, fixing the pipes into walls with necessary wooden plug, screws, holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete in all respects and as directed by the SIPCOT SIPCOT Officer.

a) 110mm dia

b) 75mm dia

c) 50mm dia

d) 40mm dia

Supplying and fixing Polished Marble slab of size 1.22x0.61m, 18mm thick for urinal partition etc., as directed by SIPCOT SIPCOT Officer.

Providing and fixing of stainless steel toilet paper holder with necessary accessories ..etc complete as directed by SIPCOT SIPCOT Officer. .

Fire Extinguisher System

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the SIPCOT Officer.s. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Medical Facility

CRECHE BUILDING

Clearing light Jungle on road side including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness..etc., complete complying with standard specification and as directed by the SIPCOT officers.

Providing Pre – Constructional Anti – Termite Treatment and creating a Chemical Barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, footings, column pits, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. Retaining / side walls, external perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining / side walls etc. as per instructions of chemical manufacturer and all as directed. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification. etc., complete complying with standard specification and as directed by the SIPCOT officers.

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc., complete complying with standard specification and as directed by the SIPCOT officers.. (including refilling)

a) 0 to 2 m depth

b) 2 to 3m depth

Supplying and filling in foundation and basement with Stone dust/Quarry dust in layers of 150 mm thickness well watered ramming, consolidation etc., complete complying with standard specification and as directed by the SIPCOT officers.

Providing Plain Cement Concrete 1:4:8(One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with etc., complete complying with standard specification and as directed by the SIPCOT officers. (in all heights and all depths)

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS etc., complete complying with standard specification and as directed by the SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

Upto 1.50 m below GL & & up to plinth level- foundtion and basement

Ground floor

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

a) For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works

b) For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works. (0-3 m)

c) For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc., complete complying with standard specification and as directed by the SIPCOT officers. (The steel rods must be Fe 500 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

Refilling with excavated soil (other than sand) complying with standard specification for filling in foundation and basement.

Brick work in Cement Mortar 1:5 (One part Cement and five part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Founation and basement

Brick work in Cement Mortar 1:6 (One part Cement and six part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Ground floor

Providing brick masonry partition wall 115 mm thick using II class ground moulded chamber burnt bricks of size 9" x 4.5" x 3" in cm 1:4 (one cement and four M sand ) including supplying and providing 2 nos. of 6 mm dia hoop reinforcement at every 4th layer, curing, raking out of the joints etc., complete compiling with standard specification.

Ground floor

Plastering with cement mortar 1:5 (One of cement and five of M sand) 12 mm thick finished with neat cement including, providing band cornice, ceiling cornice scaffolding curing etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting two coats of newly plastered External wall surface with ready mixed Weather proof Exterior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting two coats of newly plastered internal wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying and laying of ceramic tiles anti-skid 305 x 305 x 6 mm of approved special quality laid in cement mortar 1:3 (One of cement and three of sand) 20 mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc all complete in all respects complying with relevant specification and as directed by engineer in charge. Note: (The colour and quality shall be approved from the Engineer before use)

Dadooing for walls Supplying and fixing in position of colour glazed designed wall tiles of any size 6 mm thickness laid in cement mortar 1:2 (One of cement and two of sand) 10 mm thick for wall facing / duding, skirting over the plastered surfaces including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the Engineer in charge. Note: (The colour make and quality shall be approved from the Engineer before use)

Supplying and fixing of Double Charged Vitrified Tiles 800 x 800 x 10mm of best approved quality and colour laid in cement mortar 1:3 (One of cement and three of sand) 20 mm thick and pointed with coloured cement neatly including cutting to the required size and shape wherever necessary finishing neatly etc. all complete complying with relevant standard specification and as directed by the Engineer in charge. (The colour and quality of the tiles should be got approved by the Engineer before use)

Paving the floor with best approved quality fine polished Steel Grey granite stone slabs of size 1200 x 600 of 16mm to 18mm Thick with machine cut edges laid over a cement mortar bed of 20 mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with matching colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Engineer concerned before use on work, etc., complete as per standard specification.

Nosing - Single

Painting two coats of newly plastered Painting the wall with Texture Finish Paint including labour charges and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding,grinding, polishing, conveyance, electrical charges, etc.complete

Supplying and fixing Solid panel PVC door with frame using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter etc., all complete complying with standard specification as directed by the SIPCOT Officer.

Supplying and fixing of wrought and put up in position of frames inclusive of fixing holdfasts for doors, windows and ventilators etc.

a) 0 to 2m length

b) 2 to 3m length

Supplying and fixing of Solid Core Flush Shutters with teakply on both side with teakwook lipping alround 35mm thick with Ornamental Door Handle 200mm long – 2 nos, 5" Butt Hinges – 3 nos, 250mm long and 12mm dia Tower Bolt – 2nos, Mortice Lock With Night latch (Godrej or Equivalent) with required screws with 3 Keys – 1 no, Rubber Bush - 40mm dia – 1no and door stoper 1no vision panel 150x450mm as per drawing etc., cost including all material, labour charges and all hardwar materials etc., all complete complying with standard specification as directed by the SIPCOT Officer.

Flush door shutter size 900x2100 ( Single leaf)

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and fixing mild steel grills for windows, ventilators veranda enclosure, ladder and gate as per the design approved including one coat of primer and labour for fixing in position etc, all complete complying with standard specifications and as directed by "SIPCOT" officers. (The design of grill should be got approved from the SIPCOT SIPCOT Officer. before use)

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors excluding cost of priming coat etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.. (The make, quality and colour of paint should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Supply and installation of Anutone (or) Equivalent Brand of Acoustical False Ceiling of Sisoli Serene / Slate Spirts / Slate Polka Mineral Fibre/ GRG Core Ceiling Tiles of size 595 x 595 x 15mm having volume density 270 kgs / m3, weight 4kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. The skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 Cross T with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally skelet CT15 W06 Cross T with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15 W12 Cross T in direction parallel to the Main T15 to result in 600 x 600mm module. Sisoli Serene / Slate Spirts / Slate Polka of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. The systems to achieve noise reduction coefficient not less than 0.5 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, Scaffolding, transportation, conveyance, etc., complying to standard speciation.

Providing and fixing of fixed glass Partition/Roof top with 12mm thick clear toughened glass with patch fixtures (ULPT 90, ULPT 92) SS B1 brackets to support the glass on top from roof including sealant the cost including trasportation, lifting charges, fixing charges etc complete as per Manufacturer’s specifications and as directed by the Engineer in charge.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the SIPOCT SIPCOT Officer. before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the SIPCOT SIPCOT Officer. before use on work

Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10 cm to 13 cm dia including cross bracing etc. complete complying with standard specifications and as directed by "SIPCOT" officers.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the SIPCOT Officer.

Providing and Fixing of polyurethane foam for Sloped roofas thermal insulation panels or Sandwich insulated panels with external 0.50mm total coated thickness pre painted Galvalume sheet with trapezoidal roofing profile having crest height of 38mm at every 333mm span , whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free , high performance rigid polyurethane foam (PUF) conformingto IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as L flashing, C flashing etc& accessories such as screws ,fastners ,sealants etc for fixing the panel etc., complete complying with standard specification.30mm (+38mm) thick PUF roof panel

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Supply of custom made Glass Fibre Reinforeced Concrete (GRC) 20 to 25 mm Thickness.(Single side Finish). The FRC will be made of using 53 grade white portland cement manufactured by cement or equivalent.Quarty fine silica sand,Alkali resistant glass fiber manufactured by "NEG" Japan or CEMFIL spain or equivalent. Super plasticizers and polymers manufactured by BASF, sika or equivalent all necessary fasteners and anchor bolts will be used for fixing etc as directed by the SIPCOT Officer. .

Supply and Installation of GRC (OCTOGONAL SHAPE) Columns with CAPITAL, Pillar and PEDESTAL, Size :- 400 mm ( W ) x 5.1 mtr Ht.

Supply and Installation of GRC ELEMENTS , Size :- 0.575 m (W) x 0.475m (HT) x 0.6 m ( D)

Supply and Installation of GRC HAND RAIL -TOP and Bottom with Centre Design including GRC POSTS of 1 mtr Height

Internal Electrification

Distribution Board LDB : Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A 4P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only with label holder and provisions for taking up cable for size upto 35 sq.mm.6 ways 3 phase DB 40A 4P MCB - 1 no.6A to 32A SP MCB - 18 nos.etc. complete as directed and approved by engineer incharge .

Distribution Board PDB : Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only with label holder and provisions for taking up cable for size upto 35 sq.mm.etc. complete as directed and approved by engineer incharge / .

ELDB SPNDB:Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only etc.complete as directed and approved by engineer in charge.

1 PHASE UPS:Supply erection, testing, commissioning of 1 PHASE, 3 KVA, UPS WITH BATTERY - 1 HOUR BACKUP with earth connection etc.complete as directed and approved by engineer in charge.

Change over switch:Supply and fixing of 16 Amps Change Over Switch on suitable angle iron frame work with MS cable entry boxes for incoming and outgoing earthing etc.complete as directed and approved by engineer in charge.

LT Cable and End Termination

Supply and laying of the following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc. complete and as directed by SIPCOT Officer..

From LT panel to PDB

3.5 core x 25 sq.mm. Ar. Alu. UG cable

From LT panel to LDB

4 core x 16 sq.mm. Ar. Alu. UG cable

From UPS and ELDB

3 core x 6 sq.mm. FLEXIBLE COPPER CABLE

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete and as directed by SIPCOT Officer..

3.5 core x 25 sq.mm. Ar. Alu. UG cable

4 core x 16 sq.mm. Ar. Alu. UG cable

3 core x 6 sq.mm. FLEXIBLE COPPER CABLE

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc. complete and as directed by SIPCOT Officer..

3.5 core x 25 sq.mm. Ar. Alu. UG cable

4 core x 16 sq.mm. Ar. Alu. UG cable

3 core x 6 sq.mm. FLEXIBLE COPPER CABLE

Light point wiring

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire for and making good of the concealed portion with painting of suitable colour for concealed MS conduit Light point / fan point (for electronic regulator) etc.complete as directed and approved by engineer in charge.

Power point wiring with GI box, socket & switch

Wiring with 2 x 2.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe Concealed in wall and ceiling with MS accessories with suitable Module GI switch box in flush wall with 1 no. 6A one way module switch and 1 no. 6A 5 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit Plug point etc.complete as directed and approved by engineer in charge.

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A/6A 3 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit 15A Plug point etc.complete as directed and approved by engineer in charge.

For AC point

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit etc.complete as directed and approved by engineer in charge.

Supply, installation, testing and commissioning of 1.5 TR Split Type AC Unit - 5 Star Rated with Supply and installation of 4 KVA capacity Automatic Voltage Stabilizer with time delay relay and Supply and fixing of MS stand for fixing outdoor unit, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Circuit main wiring

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sq. mm copper wire with painting of suitable colour etc.complete as directed and approved by engineer in charge.

Supply and Run of 2 of 6sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq. mm copper wire with painting of suitable colour etc.complete as directed and approved by engineer in charge.

Light Fixtures and fan

Supply, installation, testing and commissioning of 36W LED 2x2 square type Recessed fitting with LED on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of 24W LED Round type Recessed fitting with LED on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer.. ( In Toilet )

Supply, installation, testing and commissioning of 18W LED Round type Recessed fitting with LED on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT Officer.. ( In Toilet )

Supply, installation, testing and commissioning of MIRROR Light 20W LED Batten inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete with 2 module 100W fan step regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") etc. complete as directed and approved by engineer incharge and as directed by SIPCOT Officer..

supply and fixing of 300mm (12") sweep AC exhaust fan complete with louvers shutters arrangements for 300mm (12") sweep etc complete as directed and approved by engineer incharge etc. complete and as directed by SIPCOT SIPCOT Officer..

supply and fixing of 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting with earth connection etc. complete and as directed by SIPCOT Officer..

Supply & laying of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height Ladder type cable tray inside the electrical room etc. complete as directed and approved by engineer incharge and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer..

Supply and run of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply and run of 1 of No.8 SWG GI wire for earth connection with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Plate Earthing as per PWD standard with a copper earth plate of size 600X600X3mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer..

Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply, laying, commissioning and testing of CAT 6A UTP Unarmoured Cable through 25mm PVC conduit .or as per the approval of site engineer incharge. painting of suitable colour etc.complete as directed and approved by engineer in charge.

Supply and installation of PVC Module Box with Face Plate Single Socket RJ-11/RJ45 back boxes with covers, with the crimping of appropriate jacks and all other necessary accessories telephone points fed through PVC insulated telephone cables inside 25 mm diameter PVC conduits etc., complete complying with standard specifications and as directed by site engineer incharge.

EPABX SYSTEM

Supply, installation, testing & Commissioning of 3 Trunk + 16 Analog Extensions. Expandable Up to 96 Analog Extension & 112 IP Port etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Basic Link Card for main system - To connect main system with expansion system. etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Basic Telephone without Caller ID etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Caller ID Telephone with Speaker etc. complete and as directed by SIPCOT Officer..

Supply, Installation, commissioning, testing of Media converter for OFC cable single mode etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, Installation, commissioning, testing of LAN NETWORK SWITCHES -24 Port etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, laying, commissioning and testing of telephone cables through 25mm PVC conduit .or as per the approval of site engineer incharge.

Supply and installation of PVC Module Box with Face Plate Single Socket RJ-11/RJ45 back boxes with covers, with the crimping of appropriate jacks and all other necessary accessories telephone points fed through PVC insulated telephone cables inside 25 mm diameter PVC conduits etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, installation,9U Rack- RACK WITH ACCESSORIES inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Solar Rooftop

Solar Rooftop:Supply, erection, testing, commissioning of Solar PV rooftop On Grid Plant comprising of followings,i) Solar panels of type Mono Crystalline, PERC, etc. ii) Power Conditioning Unit (PCU)with MPPT, Inverter, Controls, Protection Devices, Interconnecting D.C. cables,Connectors, Junction Boxes and accessories.iii) D.C. D.B iv) A.C. D.B v) A.C. cables and accessories vi) Lightning arrestor, earthing, etc. vii) Module Metallic Mounting Structures viii) Installation, Testing and Commissioning corresponds to BIS and IEC requirementsetc.complete as directed and approved by engineer in charge.

CCTV surveillance system

Supply, installation, testing, commissioning of 5MP(2560×1920 Pixel) IP Bullet camera Optical Zoom:12X-16X,Field of View (Degree):more than 90-105, Focal length:3.3 mm – 10.2 mm suitable for indoor application, Smart Analytics, IR illumination Range(meter): 30M, Supported Protocols:HTTP,HTTPS,DNS,DDNS,TCP/IP,IPv4,IPv6,IEEE 802.1 all inclusive necessary supports for installation completion as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of 5MP(2560×1920 Pixel)5MP Varifocal Motorized Dome IP Camera ,30m IR, Micro SD Optical Zoom:12X-16X,Field of View (Degree):more than 110-130, Focal length:3.3 mm – 10.2 mm suitable for indoor application, Smart Analytics, Supported Protocols:HTTP,HTTPS,DNS,DDNS,TCP/IP,IPv4,IPv6,IEEE 802.1 all inclusive necessary supports for installation completion as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of 5MP PTZ IP Camera 360 Degree, 200m IR, IP66, Audio In / Out, Alerts, Auto Tracking Optical Zoom:30X,Field of View (Degree):360, suitable for indoor application, Smart Analytics, Supported Protocols: HTTP, HTTPS, DNS, DDNS, TCP/IP, IPv4, IPv6, IEEE 802.1 all-inclusive necessary supports for installation completion as per the recommended and approved by the SIPCOT Officer.

Supply, installation 65mm dia GI pipe (Class 'B') 4mtr height with 300mm x 300mm x 6mm base plate with duly welding (MR), MS box of 30cm x 20cm x 10cm with angle iron framework with lock and key arrangements including Concreting and masonry work for fixing the post all-inclusive necessary supports for installation of CCTV camera etc. completion as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make 16 Channel Network Video Recorder (NVR), Digital Sentry Network Video storage server, including all accessories as required for satisfactory completion as per the recommended and approved by the SIPCOT Officer.

Supply of approved make 8TB HDD as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make 8 Port POE Switch as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of Rack Mountable 24 port Patch Panels with SC and LC connector as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make Patch Cord 1M as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of Fiber Patch Panel 12 Port as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make 4 Port POE Switch with SFP port for CCTV camera as per the recommended and approved by the engineer in- charge.

Supply installation testing and commissioning of 59.5-61.5 CM LED display with necessary mounting arrangements for CCTV monitoring as per the recommended and approved by the SIPCOT Officer.

Supplying and fixing of 20 Metre HDMI Cable with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply, laying, commissioning and testing of CAT 6A UTP Unarmoured Cable through 25mm PVC conduit .or as per the approval of site engineer incharge. painting of suitable colour etc.complete as directed and approved by engineer in charge.

Fire Alarm System

Supplying, installation, testing & commissioning of Addressable Multi detector with base with Binary coded address setting Dual LED’s for 360° visibility etc.complete as per specifications as per the engineer-incharge approval.

Supplying, installation, testing & commissioning of addressable manual call point Resettable type - with back box with Binary coded address setting with Status LED for 360° visibility complete as require etc.complete as per specifications or as per the engineer-incharge approval.

Supplying, installation, testing & commissioning of addressable horn cum strobe rated at 90 dBA @ 1m for Audible annunciation and 15cd minimum flashing at 1 Hz for visual indication complete as required.etc.complete as per specifications as per the engineer-incharge approval.

Supplying, installation, testing & commissioning of addressable Response indicator for all detectors located above false ceiling complete as required etc.complete as per specifications as per the engineer-incharge approval.

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the SIPCOT Officer.s

Public Address System

Supply, Installation, testing and commissioning of 480W, PA Booster Amplifier with necessary accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of Cordless Mic UHF necessary accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of Portable 9U Rack with necessary mounting arrangments etc., complete complying with standard specification.

Supply, Installation, testing and commissioning of Ceiling Speaker of 15W with necessary mounting arrangments accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, laying, testing and commissioning of 2 Core - 2.5 sq.mm Copper ARMOURED SPEAKER CABLE etc. complete complying with standard specification as per the approval of site engineer incharge.

Lightning protection System

Supply, and installation of 2mtr length Air termination rod 16/ 10 mm( Lightning rod) with necessary mounting accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of Lightning counter - LCD display and battery etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of S.S test joint kit with required necessary accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply and run of Rust resistant non corrosive 10 mm dia Copper Bonded Steel round conductor for Earth termination with necessary clamps/supports on wall/floor/ground for earth connection etc., complete complying with standard specification as per the approval of site engineer incharge.

Providing Maintenance Free earthing with Copper rod of 17.2 mm dia and 3m length for earth connection with earth conductors etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply and run of 25mm X 6mm GI strip with necessary clamps/supports on wall/floor/ground for earth connection etc., complete complying with standard specification as per the approval of site engineer incharge.

Internal Plumbing

Supplying and fixing of PVC 110mm dia pipe for rain water down fall pipe conforming to IS13592 with ISI mark and fittings conforming to IS 14735, with necessary C I gratings, shoes, bends, offsets, clamps, teak wood plugs, etc., of approved quality including fixing C.I. gratings at the junction of parapet and floor or roof slab, finishing etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

110mm dia

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. (The wash hand basin and specials should be got approved by the SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing in position best quality and approved make SS Sink of size 1200 x 550 x 180mm, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. (The wash hand basin and specials should be got approved by the SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the SIPCOT SIPCOT Officer. before use on works) Floor Fitting

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the SIPCOT Officer.s. (The water closet should be got approved by the SIPCOT SIPCOT Officer. before use on works).

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the SIPCOT Officer.s. (The urinal should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the SIPCOT SIPCOT Officer. before use on woks)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing in position CP Two Way Bib Cock with Health Faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the SIPCOT SIPCOT Officer. before use on the works)

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the SIPCOT SIPCOT Officer. before use on works)

Construction of Inspection Chamber of inner clear size of 0.60 X 0.60 meters and average depth of 0.75 m with a base concrete of 100 mm thick cement concrete 1:4:8 (One cement, five sand and 8 aggregate) the chamber should be constructed in brick masonry 230 mm thick in cement mortar 1 : 5 using country brick of size 8 ¾ X 4 ¼ X 2 ¼ . The inner side of chamber plaster with cement mortar 1 : 3 -12 mm thick. The chamber top covered with R.C.C. precast slab 1 : 2 : 4 (one cement two sand and four aggregate) 7.5cm thick. The rate is including cost of materials labour etc completed including plastering with C.M. 1:3 -12 mm thick on inner side and top covered with RCC pre cast slab of 7.5 cm thick etc complete complying with standard specifications and as directed by "SIPCOT" officers

Supplying and fixing in position 150 X 100mm square mouth 'P' or 'S' trap stoneware Gully trap A grade with castiron gratings of size 150 X 150mm with C.I. air tight cover with frames of size 230 X 230mm at bottom and top respectively laid over a bed of brick jelly cement concrete 1:3:6 150mm thick using 40mm size broken brick jelly including neccessary brick work and plastering and including dismandling masonry wherever necessary and redoing the damaged portions to the original condition and by using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to the stonewere sewer line etc., complete complying with standard specifications (the stonewere gully trap should be got approved by the SIPCOT Officer. before use on works)

Supplying and fixing in position best quality CPVC (Chlorinated Poly Vinyl Chloride) Pipe (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio–11. pressure BIS mark and providing leak proof joints using CPVC adhesives including fixing to the wall with special CPVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including the cost of suitable CPVC specials /GM specials like Elbow, Tee reducers, Plug, union, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., testing for any leakages, etc., complete complying with standard specifications and as directed by "SIPCOT" officers (The CPVC pipes should be got approved by the SIPCOT Officer. before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

a) 25mm dia Concealed line

c) 32mm dia Below GL

e) 25mm dia Below GL

Supplying and fixing the following diaPVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for soil line with relevant specials confirming to IS 14735 including jointing with seal ring confirming to IS 5382 with leaving a gap about 10mm to allow thermal expansion, fixing the pipes into walls with necessary wooden plug, screws, holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete in all respects and as directed by the SIPCOT SIPCOT Officer.

a) 110mm dia

b) 75mm dia

c) 50mm dia

d) 40mm dia

Supplying and fixing Polished Marble slab of size 1.22x0.61m, 18mm thick for urinal partition etc., as directed by SIPCOT SIPCOT Officer.

Providing and fixing of stainless steel toilet paper holder with necessary accessories ..etc complete as directed by SIPCOT SIPCOT Officer. .

Fire Extinguisher System

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the SIPCOT Officer.s. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Creche Buliding

CANTEEN & CONVENTION CENTRE

Clearing light Jungle on road side including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness..etc., complete complying with standard specification and as directed by the SIPCOT officers.

Providing Pre – Constructional Anti – Termite Treatment and creating a Chemical Barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, footings, column pits, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. Retaining / side walls, external perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining / side walls etc. as per instructions of chemical manufacturer and all as directed. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification. etc., complete complying with standard specification and as directed by the SIPCOT officers.

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc., complete complying with standard specification and as directed by the SIPCOT officers.. (including refilling)

a) 0 to 2 m depth

b) 2 to 3m depth

Supplying and filling in foundation and basement with Stone dust/Quarry dust in layers of 150 mm thickness well watered ramming, consolidation etc., complete complying with standard specification and as directed by the SIPCOT officers.

Providing Plain Cement Concrete 1:4:8(One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with etc., complete complying with standard specification and as directed by the SIPCOT officers. (in all heights and all depths)

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS etc., complete complying with standard specification and as directed by the SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

Foundation & Basement

Ground floor

First Floor

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

a) For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works

b) For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works. (0-3 m)

c) For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc., complete complying with standard specification and as directed by the SIPCOT officers. (The steel rods must be Fe 500 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

Refilling with excavated soil (other than sand) complying with standard specification for filling in foundation and basement.

Brick work in Cement Mortar 1:5 (One part Cement and five part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Founation and basement

Brick work in Cement Mortar 1:6 (One part Cement and six part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Ground floor

First Floor

Providing brick masonry partition wall 115 mm thick using II class ground moulded chamber burnt bricks of size 9" x 4.5" x 3" in cm 1:4 (one cement and four M sand ) including supplying and providing 2 nos. of 6 mm dia hoop reinforcement at every 4th layer, curing, raking out of the joints etc., complete complying with standard specifications and as directed by "SIPCOT" officers

Ground floor

First Floor

Plastering with cement mortar 1:5 (One of cement and five of M sand) 12 mm thick finished with neat cement including, providing band cornice, ceiling cornice scaffolding curing etc., complete complying with standard specification and as directed by SIPCOT officers.

Plastering in C.M 1:3 (one of cement and three of M sand) 10 mm thick for bottom of sunshade, ceiling in all floors, including scaffolding, curing, finishing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting two coats of newly plastered External wall surface with ready mixed Weather proof Exterior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting two coats of newly plastered internal wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

White washing Two coat with freshly burnt white shell lime in all floors including cost of lime, blue powder, fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s.

Supplying and laying of ceramic tiles anti-skid 305 x 305 x 6 mm of approved special quality laid in cement mortar 1:3 (One of cement and three of sand) 20 mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc all complete in all respects complying with relevant specification and as directed by SIPCOT Officers Note: (The colour and quality shall be approved from the Engineer before use)

Dadooing for walls Supplying and fixing in position of colour glazed designed wall tiles of any size 6 mm thickness laid in cement mortar 1:2 (One of cement and two of sand) 10 mm thick for wall facing / duding, skirting over the plastered surfaces including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete complying with standard specifications and as directed by "SIPCOT" officersNote: (The colour make and quality shall be approved from the Engineer before use)

Dadooing for walls Supplying and fixing in position of colour glazed / matt finish designed wall tiles (for elevation) of any size 600 x 300 x10 mm thickness laid in cement mortar 1:2 (One of cement and two of sand) 10 mm thick for wall facing / duding, skirting over the plastered surfaces including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the Engineer in charge. Note: (The colour make and quality shall be approved from the Engineer before use)

Supplying and fixing of Double Charged Vitrified Tiles 800 x 800 x 10mm of best approved quality and colour laid in cement mortar 1:3 (One of cement and three of sand) 20 mm thick and pointed with coloured cement neatly including cutting to the required size and shape wherever necessary finishing neatly etc. all complete complying with relevant standard specification and as directed by the Engineer in charge. (The colour and quality of the tiles should be got approved by the Engineer before use)

Paving the floor with best approved quality fine polished Steel Grey granite stone slabs of size 1200 x 600 of 16mm to 18mm Thick with machine cut edges laid over a cement mortar bed of 20 mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with matching colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Engineer concerned before use on work, etc., complying with standard specifications and as directed by "SIPCOT" officers

Supplying and fixing 20 mm thick machine cut granite stone slabs of size 1200 x 600 and synthetic grey, paradise and similar varieties. treads and risers in single piece for all staircases with rounded edge nosing and 3 nos. of antiskid grooves over a cement mortar bed 20 mm thick average, in CM 1:4 finished in all respects, including prefinished nosing to treads of steps, cost of materials, labour, curing complying with standard specifications and as directed by "SIPCOT" officers

Nosing - Single

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding,grinding, polishing, conveyance, electrical charges, etc.complete complying with standard specifications and as directed by "SIPCOT" officers

Weathering course with broken brick jelly lime concrete using 40 to 20 mm gauge broken brick jelly in pure slaked lime (no sand) over roof slab to the proportion of brick jelly to lime (fat lime) being 32 : 12 1 /2 by volume well beaten with wooden beaters, for giving the required slope and thickness including laying and finishing, etc, all complete complying with standard specifications and as directed by "SIPCOT" officers

Finishing the top of roof slab with one course of hydraulically pressed tile of approved superior quality of size 23 cm x 23 cm, 20 mm thick laid over weathering course in cement mortar 1:3 (One of cement and three of M sand) 12 mm thick, mixed with water proofing compound at 2% by weight of cement used and pointed neatly with the same cement mortar mixed with water proofing compound including curing etc., complete in all respects complying with relevant standard specifications and as directed by the engineer in charge. (Note: Tiles to be got approved by the SIPCOT Officer. before use and only one particular size pressed tiles should be used for one type of building)

Supplying and fixing Solid panel PVC door with frame using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter etc., all complete complying with standard specification as directed by the SIPCOT Officer.

Supplying and fixing of PVC Sliding Door with Roller all complete complying with standard specification as directed by the SIPCOT Officer.

Supplying and fixing of wrought and put up in position of frames inclusive of fixing holdfasts for doors, windows and ventilators etc.

a) 0 to 2m length

b) 2 to 3m length

Supplying and fixing of Solid Core Flush Shutters with teakply on both side with teakwook lipping alround 35mm thick with Ornamental Door Handle 200mm long – 2 nos, 5" Butt Hinges – 3 nos, 250mm long and 12mm dia Tower Bolt – 2nos, Mortice Lock With Night latch (Godrej or Equivalent) with required screws with 3 Keys – 1 no, Rubber Bush - 40mm dia – 1no and door stoper 1no vision panel 150x450mm as per drawing etc., cost including all material, labour charges and all hardwar materials etc., all complete complying with standard specification as directed by the SIPCOT Officer.

(Single leaf)

(Double leaf)

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and fixing mild steel grills for windows, ventilators veranda enclosure, ladder and gate as per the design approved including one coat of primer and labour for fixing in position etc, all complete complying with standard specifications and as directed by "SIPCOT" officers. (The design of grill should be got approved from the SIPCOT SIPCOT Officer. before use)

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors excluding cost of priming coat etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.. (The make, quality and colour of paint should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Supply and installation of Anutone (or) Equivalent Brand of Acoustical False Ceiling of Sisoli Serene / Slate Spirts / Slate Polka Mineral Fibre/ GRG Core Ceiling Tiles of size 595 x 595 x 15mm having volume density 270 kgs / m3, weight 4kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. The skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 Cross T with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally skelet CT15 W06 Cross T with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15 W12 Cross T in direction parallel to the Main T15 to result in 600 x 600mm module. Sisoli Serene / Slate Spirts / Slate Polka of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. The systems to achieve noise reduction coefficient not less than 0.5 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, Scaffolding, transportation, conveyance, etc., complying to standard speciation.

Supplying and fixing of 12mm thick toughened frosted/plain glass with top patch, bottom patch, corner lock and SS H type handle 500mm long with required screws, Double Acton Hydraulic Floor Spring and imported SS finish in dobule leaf door including labour charges and other fitting, door beading with standard specification, door for all size and floors etc all complete and as directed by the SIPCOT Officer.s.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the SIPOCT SIPCOT Officer. before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the SIPCOT SIPCOT Officer. before use on work

Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10 cm to 13 cm dia including cross bracing etc. complete complying with standard specifications and as directed by "SIPCOT" officers.

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the SIPCOT Officer.

Providing and Fixing of polyurethane foam for Sloped roofas thermal insulation panels or Sandwich insulated panels with external 0.50mm total coated thickness pre painted Galvalume sheet with trapezoidal roofing profile having crest height of 38mm at every 333mm span , whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free , high performance rigid polyurethane foam (PUF) conforming to IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as L flashing, C flashing etc& accessories such as screws ,fastners ,sealants etc for fixing the panel etc., complete complying with standard specification. 30mm (+38mm) thick PUF roof panel

Designing the Semi Unitised Structural Glazing System with open groove joint as per design intent, preparation of shop drawings for approval, supply, fabricate, erect as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by the Dept. SIPCOT Officer..) Design the framing system (i.e. male & Female frame) to support vision panels, spandrel panels either with glass or aluminium composite panel, openable, window panels on a continuous framing supported between floors. Also design the split framing unutilized glazing system in case of strip or punched windows with vision panel proposed with either insulated / Monolithic glass, groove width in the system both in horizontal and vertical shall not be more than 20mm. Glazing of panel shall be done only at factory at the controlled atmosphere

Supplying and fixing premium quality Glass Canopy using 12mm thick clear toughened glass with required fixing accessories cost including all material, labour charges, and all hardware materials, etc., all completely complying with standard specifications as directed by the SIPCOT Officer..

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers.

Supply of custom-made Glass Fibre Reinforced Concrete (GRC) 20 to 25 mm Thickness. (Single side Finish). The FRC will be made of using 53 grade white Portland cement manufactured by cement or equivalent. Quarty fine silica sand, Alkali resistant glass fibre manufactured by "NEG" Japan or CEMFIL Spain or equivalent. Super plasticizers and polymers manufactured by BASF, sika or equivalent all necessary fasteners and anchor bolts will be used for fixing etc as directed by the SIPCOT Officer.

Supply and Installation of GRC (OCTOGONAL SHAPE) Columns with CAPITAL, Pillar and PEDESTAL, Size :- 400 mm ( W ) x 11.85 mtr Ht.

Supply and Installation of GRC ELEMENTS , Size :- 0.575 m (W) x 0.47m (HT) x 0.6 m ( D)

Supply and Installation of GRC HAND RAIL -TOP and Bottom with Centre Design including GRC POSTS of 1 mtr Height

Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like Roof & Podium area applied @ 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, including a prime coat of solvent free, medium viscous, epoxy primer @0.2L/m2 and protection with 120gsm Geotextile over the 7 days cured waterproofing membrane. The Waterproofing material shall have Solids > 85%, Tensile strength >2 Mpa as per ASTM D 412, Elongation at break >400% confirms to ASTM C 1305 for crack bridging ability (no cracks up to 3.2mm) Shore A Hardness >55 as per ASTM D 2240, Adhesion to peel after water immersion as per ASTM C 794 at 5.2N. Resistance to root penetration as per UNE CN/ TS 14416. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 60gsm Geo-textile over the angle fillet when the first coat in still wet, treatment of cracks and laying 120GSM Geo-textile as seperation/protective layer over the fully cured PU coating completely as per specification.

Internal Electrification

Sub-power power panel:Design, manufacture, supply, erection, testing and commissioning of main Power panel suitable for 415Volts 3Phase 4wire system, indoor/outdoor installation, made up of CRCA sheet steel of thickness not less than 2 mm with a weather proof canopy of top, double door construction, IP 55 protection, anti corrosive chemical resistant paint dust & vermin proof, cubicle type, floor mounted, undrilled gland plates at top / bottom, complete with internal wiring, ferrules, name plates, Locking System with heat shrinkable colour coded sleeve with SMC Bus bar supports with aluminium Busbar 400A, 50 kA, TPN 50 Hz, bus bars . The Panel should be fully comply to IEC 61439 part 1 & 2 of type tested assembly with incomer : 1 Nos - 400A, 4P, 50kA MCCB Microprocessor based releases (with Over current / Earth fault / Short circuit ) & Trip & close Coil feature with earthing, door interlock, automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming & outgoing cable sides of the circuit breaker metering for each Incomer and out goings: Load Manager with RS485 Interface with Maximum Demand Indication + controller, automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming & outgoing cable sides of the circuit breaker with associated protections MCB's, R,Y,B Phase Indicating lamps and control circuit as required and energy meter for out going feeders etc.Out going:160A 4P Microprocessor based MCCB - 3Nos 125A 4P Microprocessor based MCCB - 1Nos 63-100A 4P Microprocessor based MCCB- 12Nos - 100 MCB, 4P-2Noswith digital multifunctional meter with RS485 port and suitable CT etc. including concrete pedestal and associated civil works etc. complete and as approved and directed by SIPCOT Officer.

VTPNDB: Supply and fixing of 8way Industrial type Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board (with MCCB incomer) with double door (metal door) with 1 no. 160A 4P MCCB switch as incoming with SC & OC protection and 8 nos.63A 4P MCB as outgoing including suitable bus-bar connection with suitable cable end box on suitable angle iron frame on wall with earth connection only etc. complete as directed and approved by SIPCOT Officer.

Distribution Board LDB : Supply and fixing of 8 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A 4P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only with label holder and provisions for taking up cable for size upto 35 sq.mm.8 ways 3 phase DBNo. of ways incomer MCB / Isolator - 4- 40A, 4p MCB- 1noNo. of ways incomer ELCB / RCD - 4- 40A,30mA-1noNo. of outgoings ways - 24 - 6-32A , SP MCB-24nosetc. complete as directed and approved by v

Distribution Board PDB : Supply and fixing of 8 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 24 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only with label holder and provisions for taking up cable for size upto 35 sq.mm.etc. complete as directed and approved by SIPCOT Officer.

SPNDB:Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only etc.complete as directed and approved by SIPCOT Officer..

1 PHASE UPS:Supply erection, testing, commissioning of 1 PHASE, 5KVA, UPS WITH BATTERY - 1 HOUR BACKUP with earth connection etc.complete as directed and approved by SIPCOT Officer.

LT Cable and End Termination

Supply and laying of the following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc. complete and as directed by SIPCOT Officer..

3.5 core x 185 sq.mm. Ar. Alu. UG cable

3.5 core x 50 sq.mm. Ar. Alu. UG cable

3.5 core x 25 sq.mm. Ar. Alu. UG cable

3.5 core x 25 sq.mm. Ar. Alu. UG cable

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete and as directed by SIPCOT Officer..

3.5 core x 185 sq.mm. Ar. Alu. UG cable

3.5 core x 50 sq.mm. Ar. Alu. UG cable

3.5 core x 25 sq.mm. Ar. Alu. UG cable

3.5 core x 25 sq.mm. Ar. Alu. UG cable

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc. complete and as directed by SIPCOT Officer..

3.5 core x 185 sq.mm. Ar. Alu. UG cable

3.5 core x 50 sq.mm. Ar. Alu. UG cable

3.5 core x 25 sq.mm. Ar. Alu. UG cable

3.5 core x 25 sq.mm. Ar. Alu. UG cable

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

Light point wiring

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire for and making good of the concealed portion with painting of suitable colour for concealed MS conduit Light point / fan point (for electronic regulator) etc.complete as directed and approved by engineer in charge.

Power point wiring with GI box, socket & switch

Wiring with 2 x 2.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe Concealed in wall and ceiling with MS accessories with suitable Module GI switch box in flush wall with 1 no. 6A one way module switch and 1 no. 6A 5 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit Plug point etc.complete as directed and approved by engineer in charge.

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A/6A 3 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit 15A Plug point etc.complete as directed and approved by engineer in charge.

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit etc.complete as directed and approved by engineer in charge.

Supply, installation, testing and commissioning of 1.5 TR Split Type AC Unit - 5 Star Rated with Supply and installation of 4 KVA capacity Automatic Voltage Stabilizer with time delay relay and Supply and fixing of MS stand for fixing outdoor unit, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Circuit main wiring

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sq. mm copper wire with painting of suitable colour etc.complete as directed and approved by engineer in charge.

Supply and Run of 2 of 6sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq. mm copper wire with painting of suitable colour etc.complete as directed and approved by engineer in charge.

Light Fixtures and fan

Supply, installation, testing and commissioning of 36W LED 2x2 square type Recessed fitting with LED on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of 24W LED Round type Recessed fitting with LED on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer.. ( In Toilet )

Supply, installation, testing and commissioning of 18W LED Round type Recessed fitting with LED on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT Officer.. ( In Toilet )

Supply, installation, testing and commissioning of 40W (2x20W), 4ft LED tube light fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of MIRROR Light 20W LED Batten inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete with 2 module 100W fan step regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") etc. complete as directed and approved by engineer incharge and as directed by SIPCOT Officer..

supply and fixing of 300mm (12") sweep AC exhaust fan complete with louvers shutters arrangements for 300mm (12") sweep etc complete as directed and approved by engineer incharge etc. complete and as directed by SIPCOT SIPCOT Officer..

supply and fixing of 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting with earth connection etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer..

Supply and run of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply and run of 1 of No.8 SWG GI wire for earth connection with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Plate Earthing as per PWD standard with a copper earth plate of size 600X600X3mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer..

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply & laying of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height Ladder type cable tray inside the electrical room etc. complete as directed and approved by engineer incharge and as directed by SIPCOT Officer..

Supply ,Excavation and laying of HDPE Pipe 120mm / 103.50mm for electrical cable laying road crossing etc., complete and as directed by SIPCOT SIPCOT Officer..

Supply, laying, commissioning and testing of CAT 6A UTP Unarmoured Cable through 25mm PVC conduit .or as per the approval of site engineer incharge. painting of suitable colour etc.complete as directed and approved by engineer in charge.

Supply and installation of PVC Module Box with Face Plate Single Socket RJ-11/RJ45 back boxes with covers, with the crimping of appropriate jacks and all other necessary accessories telephone points fed through PVC insulated telephone cables inside 25 mm diameter PVC conduits etc., complete complying with standard specifications and as directed by site engineer incharge.

Supplying, Installation, testing and commissioning of VRF 4 Way Cassette Indoor Unit ceiling mounting type , 4TR ( Not less than 48000BTU/hr), , 3 phase A.C. Units, with BEE star rating of above 3star. The unit shall have cordless remote controller with LCD display to display the various parameters and to operate the Cassette AC unit . The ceiling unit shall be extremely quiet in operation, the air louvers shall have auto swing facility to distribute cool air uniformly. Integrated drain pump shall be provided with the ceiling unit so as to drain the condensed water effectively without damaging the false ceiling. Insulation, Copper Piping & Cabling, Drain Piping etc. will be as per the site actuals requirements etc. supply and fixing of supports to fix the unit, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply and laying of 3 core 4sq.mm 1100V PVC Copper Armoured Under Ground cable with ISI mark with supply and clamping including transport charges of UG cables in wall and ceiling with accessories with Supply and fixing of 32A 200/250V 2P+E SocketsFlush type and 32A DP MCB complete set with earth connection with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting etc.complete as directed and approved by engineer in charge.

Supply and fixing of 32A 380/415V 3P+N+E Surface Mounting Sockets and 32A FP MCB complete set with earth connection with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire .complete as directed and approved by engineer in charge.

Supplying, Installation, testing and commissioning of VRF out door unit of 17 TR for multiple numbers of ceiling mounting type Cassette Indoor Unit with refrigerant piping work follows the indoor unit and outdoor unit installation the foundation and vibration-proof rubbers to directly support the bottom surface of the fixing leg that is in contact with the bottom plate of the outdoor unit decrease the operating noise or vibration of the outdoor unit & does not cause any drainage problem with discharged water.Fix the base firmly with anchor bolts (M10) to prevent it from collapsing. Insulation, Copper Piping & Cabling, Drain Piping etc. will be as per the site actuals requirements etc. supply and fixing of supports to fix the unit, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply and laying of the following PVC armoured LTUG cable Supply and clamping including transport charges of UG cables

3.5 core x 25 sq.mm. Ar. Alu. UG cable

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete and as directed by SIPCOT Officer..

3.5 core x 25 sq.mm. Ar. Alu. UG cable

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc. complete and as directed by SIPCOT Officer..

3.5 core x 25 sq.mm. Ar. Alu. UG cable

Supply of 2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS etc. complete and as directed by SIPCOT Officer..

First Aid Box complete with all First Aid Medicines etc. complete and as directed by SIPCOT Officer..

Shock Treatment Chart fixed in glass frame etc. complete and as directed by SIPCOT Officer..

EPABX SYSTEM

Supply, installation, testing & Commissioning of 3 Trunk + 16 Analog Extensions. Expandable Up to 96 Analog Extension & 112 IP Port etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Basic Link Card for main system - To connect main system with expansion system. etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Basic Telephone without Caller ID etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Caller ID Telephone with Speaker etc. complete and as directed by SIPCOT Officer..

Supply, Installation, commissioning, testing of Media converter for OFC cable single mode etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, Installation, commissioning, testing of LAN NETWORK SWITCHES -24 Port etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, laying, commissioning and testing of telephone cables through 25mm PVC conduit .or as per the approval of site engineer incharge.

Supply and installation of PVC Module Box with Face Plate Single Socket RJ-11/RJ45 back boxes with covers, with the crimping of appropriate jacks and all other necessary accessories telephone points fed through PVC insulated telephone cables inside 25 mm diameter PVC conduits etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, installation,9U Rack- RACK WITH ACCESSORIES inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Passenger Lift

Design, manufacture, supply, erection, testing and commissioning of Passenger Lift having capacity of Max. 8 Persons with MRL, Speed 1.5 m/s with Stainless Steel Panels, Disable friendly, microprocessor based controller, VVVF drive, Fire rated doors and ARD with on-site comprehensive warranty of lift from the date of successful commissioning of lift at the designated location & shall cover each and every part of the lift. The lift shall be supplied with main control panel suitable for 415Volts 3Phase 4wire system made up of CRCA sheet steel of thickness not less than 2 mm single/double door construction, IP 55 protection, anti corrosive chemical resistant paint dust & vermin proof, cubicle type, floor mounted, undrilled gland plates at top / bottom, complete with internal wiring, ferrules, name plates, Locking System with heat shrinkable colour coded sleeve with associated protections MCB's, R,Y,B Phase Indicating lamps and control circuit as required and including concrete pedestal and associated civil works etc. complete and as approved and directed by SIPCOT Officer.

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer..

Supply and run of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Solar Rooftop

Solar Rooftop:Supply, erection, testing, commissioning of Solar PV rooftop On Grid Plant comprising of followings,i) Solar panels of type Mono Crystalline, PERC, etc.ii) Power Conditioning Unit (PCU)with MPPT, Inverter, Controls, Protection Devices, Interconnecting D.C. cables,Connectors, Junction Boxes and accessories.iii) D.C. D.Biv) A.C. D.Bv) A.C. cables and accessoriesvi) Lightning arrestor, earthing, etc.vii) Module Metallic Mounting Structuresviii) Installation, Testing and Commissioning corresponds to BIS and IEC requirementsetc.complete as directed and approved by engineer in charge.

Fire Alarm System

Supplying, installation, testing & commissioning of Addressable Multi detector with base with Binary coded address setting Dual LED’s for 360° visibility etc.complete as per specifications as per the engineer-incharge approval.

Supplying, installation, testing & commissioning of addressable manual call point Resettable type - with back box with Binary coded address setting with Status LED for 360° visibility complete as require etc.complete as per specifications or as per the engineer-incharge approval.

Supplying, installation, testing & commissioning of addressable horn cum strobe rated at 90 dBA @ 1m for Audible annunciation and 15cd minimum flashing at 1 Hz for visual indication complete as required.etc.complete as per specifications as per the engineer-incharge approval.

Supplying, installation, testing & commissioning of addressable Response indicator for all detectors located above false ceiling complete as required etc.complete as per specifications as per the engineer-incharge approval.

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the SIPCOT Officer.s

Public Address System

Supply, Installation, testing and commissioning of 480W, PA Booster Amplifier with necessary accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of Cordless Mic UHF necessary accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of Portable 9U Rack with necessary mounting arrangments etc., complete complying with standard specification.

Supply, Installation, testing and commissioning of Ceiling Speaker of 15W with necessary mounting arrangments accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, laying, testing and commissioning of 2 Core - 2.5 sq.mm Copper ARMOURED SPEAKER CABLE etc. complete complying with standard specification as per the approval of site engineer incharge.

Lightning protection System

Supply, and installation of 2mtr length Air termination rod 16/ 10 mm( Lightning rod) with necessary mounting accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of Lightning counter - LCD display and battery etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of S.S test joint kit with required necessary accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply and run of Rust resistant non corrosive 10 mm dia Copper Bonded Steel round conductor for Earth termination with necessary clamps/supports on wall/floor/ground for earth connection etc., complete complying with standard specification as per the approval of site engineer incharge.

Providing Maintenance Free earthing with Copper rod of 17.2 mm dia and 3m length for earth connection with earth conductors etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply and run of 25mm X 6mm GI strip with necessary clamps/supports on wall/floor/ground for earth connection etc., complete complying with standard specification as per the approval of site engineer incharge.

CCTV surveillance system

Supply, installation, testing, commissioning of 5MP(2560×1920 Pixel) IP Bullet camera Optical Zoom:12X-16X,Field of View (Degree):more than 90-105, Focal length:3.3 mm – 10.2 mm suitable for indoor application, Smart Analytics, IR illumination Range(meter): 30M, Supported Protocols:HTTP,HTTPS,DNS,DDNS,TCP/IP,IPv4,IPv6,IEEE 802.1 all inclusive necessary supports for installation completion as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of 5MP(2560×1920 Pixel)5MP Varifocal Motorized Dome IP Camera ,30m IR, Micro SD Optical Zoom:12X-16X,Field of View (Degree):more than 110-130, Focal length:3.3 mm – 10.2 mm suitable for indoor application, Smart Analytics, Supported Protocols:HTTP,HTTPS,DNS,DDNS,TCP/IP,IPv4,IPv6,IEEE 802.1 all inclusive necessary supports for installation completion as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make 32 Channel Network Video Recorder (NVR), Digital Sentry Network Video storage server, including all accessories as required for satisfactory completion as per the recommended and approved by the SIPCOT Officer.

Supply of approved make 8TB HDD as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make 8 Port POE Switch as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of Rack Mountable 24 port Patch Panels with SC and LC connector as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make Patch Cord 1M as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of Fiber Patch Panel 12 Port as per the recommended and approved by the SIPCOT Officer.

Supply installation testing and commissioning of 59.5-61.5 CM LED display with necessary mounting arrangements for CCTV monitoring as per the recommended and approved by the SIPCOT Officer.

Supplying and fixing of 20 Metre HDMI Cable with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply, laying, commissioning and testing of CAT 6A UTP Unarmoured Cable through 25mm PVC conduit .or as per the approval of site engineer incharge. painting of suitable colour etc.complete as directed and approved by engineer in charge.

Internal Plumbing

Supplying and fixing of PVC 110mm dia pipe for rain water down fall pipe conforming to IS13592 with ISI mark and fittings conforming to IS 14735, with necessary C I gratings, shoes, bends, offsets, clamps, teak wood plugs, etc., of approved quality including fixing C.I. gratings at the junction of parapet and floor or roof slab, finishing etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

110mm dia

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. (The wash hand basin and specials should be got approved by the SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing in position best quality and approved make SS Sink of size 1200 x 550 x 180mm, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. (The wash hand basin and specials should be got approved by the SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the SIPCOT SIPCOT Officer. before use on works) Floor Fitting

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the SIPCOT Officer.s. (The urinal should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the SIPCOT SIPCOT Officer. before use on woks)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing best approved best quakity brass cp soap tray of size 150 x 150 mm including cost of teek wood plugs, brass screwsetc. complete complying with standard specifications and as directed by the SIPCOT Officers ( The Soap tray should be got approved by SIPCOT Officials before use on Works)

Supplying and fixing in position CP Two Way Bib Cock with Health Faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the SIPCOT SIPCOT Officer. before use on the works)

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the SIPCOT SIPCOT Officer. before use on works)

Construction of Inspection Chamber of inner clear size of 0.60 X 0.60 meters and average depth of 0.75 m with a base concrete of 100 mm thick cement concrete 1:4:8 (One cement, five sand and 8 aggregate) the chamber should be constructed in brick masonry 230 mm thick in cement mortar 1 : 5 using country brick of size 8 ¾ X 4 ¼ X 2 ¼ . The inner side of chamber plaster with cement mortar 1 : 3 -12 mm thick. The chamber top covered with R.C.C. precast slab 1 : 2 : 4 (one cement two sand and four aggregate) 7.5cm thick. The rate is including cost of materials labour etc completed including plastering with C.M. 1:3 -12 mm thick on inner side and top covered with RCC pre cast slab of 7.5 cm thick etc complete complying with standard specification

Supplying and fixing in position 150 X 100mm square mouth 'P' or 'S' trap stoneware Gully trap A grade with castiron gratings of size 150 X 150mm with C.I. air tight cover with frames of size 230 X 230mm at bottom and top respectively laid over a bed of brick jelly cement concrete 1:3:6 150mm thick using 40mm size broken brick jelly including neccessary brick work and plastering and including dismandling masonry wherever necessary and redoing the damaged portions to the original condition and by using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to the stonewere sewer line etc., complete complying with standard specifications (the stonewere gully trap should be got approved by the SIPCOT SIPCOT Officer. before use on works)

Supplying and fixing in position best quality CPVC (Chlorinated Poly Vinyl Chloride) Pipe (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio–11. pressure BIS mark and providing leak proof joints using CPVC adhesives including fixing to the wall with special CPVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including the cost of suitable CPVC specials /GM specials like Elbow, Tee reducers, Plug, union, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., testing for any leakages, etc., complete complying with standard specifications. (The CPVC pipes should be got approved by the SIPCOT SIPCOT Officer. before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

a) 25mm dia Concealed line

c) 40mm dia Below GL

e) 32mm dia Below GL

Supplying and fixing the following diaPVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for soil line with relevant specials confirming to IS 14735 including jointing with seal ring confirming to IS 5382 with leaving a gap about 10mm to allow thermal expansion, fixing the pipes into walls with necessary wooden plug, screws, holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete in all respects and as directed by the SIPCOT SIPCOT Officer.

a) 110mm dia

b) 75mm dia

c) 50mm dia

d) 40mm dia

Supplying and fixing Polished Marble slab of size 1.22x0.61m, 18mm thick for urinal partition etc., as directed by SIPCOT SIPCOT Officer.

Providing and fixing of stainless steel toilet paper holder with necessary accessories ..etc complete as directed by SIPCOT SIPCOT Officer. .

Fire Extinguisher System

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the SIPCOT Officer.s. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

CANTEEN & CONVENTION CENTRE

ENTRANCE ARCH

Clearing light Jungle on road side including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness..etc., complete complying with standard specification and as directed by the SIPCOT officers.

Providing Pre – Constructional Anti – Termite Treatment and creating a Chemical Barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, footings, column pits, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. Retaining / side walls, external perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining / side walls etc. as per instructions of chemical manufacturer and all as directed. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification. etc., complete complying with standard specification and as directed by the SIPCOT officers.

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc., complete complying with standard specification and as directed by the SIPCOT officers.. (including refilling)

a) 0 to 2 m depth

b) 2 to 3m depth

Supplying and filling in foundation and basement with Stone dust/Quarry dust in layers of 150 mm thickness well watered ramming, consolidation etc., complete complying with standard specification and as directed by the SIPCOT officers.

Providing Plain Cement Concrete 1:4:8(One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with etc., complete complying with standard specification and as directed by the SIPCOT officers. (in all heights and all depths)

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS etc., complete complying with standard specification and as directed by the SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

Foundation & Basement

Ground floor

First Floor

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

a) For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works

b) For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works. (0-3 m)

c) For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc., complete complying with standard specification and as directed by the SIPCOT officers. (The steel rods must be Fe 500 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

Brick work in Cement Mortar 1:5 (One part Cement and five part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Founation and basement

Brick work in Cement Mortar 1:6 (One part Cement and six part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Ground floor

First Floor

Plastering with cement mortar 1:5 (One of cement and five of M sand) 12 mm thick finished with neat cement including, providing band cornice, ceiling cornice scaffolding curing etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting two coats of newly plastered External wall surface withtexture finish paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting two coats of newly plastered internal wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

Designing the Semi Unitised Structural Glazing System with open groove joint as per design intent, preparation of shop drawings for approval, supply, fabricate, erect as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by the Dept. SIPCOT Officer..) Design the framing system (i.e. male & Female frame) to support vision panels, spandrel panels either with glass or aluminium composite panel, openable, window panels on a continuous framing supported between floors. Also design the split framing unutilized glazing system in case of strip or punched windows with vision panel proposed with either insulated / Monolithic glass, groove width in the system both in horizontal and vertical shall not be more than 20mm. Glazing of panel shall be done only at factory at the controlled atmosphere

Supplying and fixing of Double Charged Vitrified Tiles 800 x 800 x 10mm of best approved quality and colour laid in cement mortar 1:3 (One of cement and three of sand) 20 mm thick and pointed with coloured cement neatly including cutting to the required size and shape wherever necessary finishing neatly etc. all complete complying with relevant standard specification and as directed by the Engineer in charge. (The colour and quality of the tiles should be got approved by the Engineer before use)

Supplying and fixing of wrought and put up in position of frames inclusive of fixing holdfasts for doors, windows and ventilators etc.

a) 0 to 2m length

b) 2 to 3m length

Supplying and fixing of Solid Core Flush Shutters with teakply on both side with teakwook lipping alround 35mm thick with Ornamental Door Handle 200mm long – 2 nos, 5" Butt Hinges – 3 nos, 250mm long and 12mm dia Tower Bolt – 2nos, Mortice Lock With Night latch (Godrej or Equivalent) with required screws with 3 Keys – 1 no, Rubber Bush - 40mm dia – 1no and door stoper 1no vision panel 150x450mm as per drawing etc., cost including all material, labour charges and all hardwar materials etc., all complete complying with standard specification as directed by the SIPCOT Officer.

Fluse door shutter size 900 x 2100 (Single leaf)

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and fixing mild steel grills for windows, ventilators veranda enclosure, ladder and gate as per the design approved including one coat of primer and labour for fixing in position etc, all complete complying with standard specifications and as directed by "SIPCOT" officers. (The design of grill should be got approved from the SIPCOT SIPCOT Officer. before use)

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors excluding cost of priming coat etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.. (The make, quality and colour of paint should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the SIPOCT SIPCOT Officer. before use on work

Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10 cm to 13 cm dia including cross bracing etc. complete complying with standard specifications and as directed by "SIPCOT" officers.

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the SIPCOT Officer.

Supply and fixing of Cladding sheets out of 0.47 mm TCT coated galvalume sheets, rate including all materials, labour charges, scaffolding, staging, transportation, lead & Lifts, wastage, etc,. No separate payment made for bolts, nuts, self driving screws, washers, welding etc.., all complete, as directed by the SIPCOT Officer.s.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Supplying and Fixing of English Brass Letters of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes

Supplying and Fixing of brass Emblem of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes

Supply of custom made Glass Fibre Reinforeced Concrete (GRC) 20 to 25 mm Thickness.(Single side Finish). The FRC will be made of using 53 grade white portland cement manufactured by cement or equivalent.Quarty fine silica sand,Alkali resistant glass fiber manufactured by "NEG" Japan or CEMFIL spain or equivalent. Super plasticizers and polymers manufactured by BASF, sika or equivalent all necessary fasteners and anchor bolts will be used for fixing etc as directed by the SIPCOT Officer. .

Supply and Installation of GRC (OCTOGONAL SHAPE) Columns with CAPITAL, Pillar and PEDESTAL, Size :- 400 mm ( W ) x 8.8 mtr Ht.

Supply and Installation of GRC (OCTOGONAL SHAPE)SMALL Columns with CAPITAL, Pillar. Size :- 400 mm ( W ) x 6.5 mtr Ht.

Supply and Installation of GRC ELEMENTS (GRC Brackets), SIZE :- 1.8 m ( W ) x 1 m ( Ht ) x 0.6 mtr ( D )

Internal Electrification

Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A 4P MCB Isolator as incoming and 40A,30mA, 4P RCCB and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection complete etc.complete as directed and approved by engineer in charge.

SPNDB:Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only etc.complete as directed and approved by engineer in charge.

1 PHASE UPS:Supply erection, testing, commissioning of 1 PHASE, 2KVA, UPS WITH BATTERY - 1 HOUR BACKUP with earth connection etc.complete as directed and approved by engineer in charge.

LT Cable and End Termination

Supply and laying of the following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc. complete and as directed by SIPCOT Officer..

3.5 core x 25 sq.mm. Ar. Alu. UG cable

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete and as directed by SIPCOT Officer..

3.5 core x 25 sq.mm. Ar. Alu. UG cable

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc. complete and as directed by SIPCOT Officer..

3.5 core x 25 sq.mm. Ar. Alu. UG cable

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

Light point wiring

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire for and making good of the concealed portion with painting of suitable colour for concealed MS conduit Light point / fan point (for electronic regulator) etc.complete as directed and approved by engineer in charge.

Power point wiring with GI box, socket & switch

Wiring with 2 x 2.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe Concealed in wall and ceiling with MS accessories with suitable Module GI switch box in flush wall with 1 no. 6A one way module switch and 1 no. 6A 5 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit Plug point etc.complete as directed and approved by engineer in charge.

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A/6A 3 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit 15A Plug point etc.complete as directed and approved by engineer in charge.

Circuit main wiring

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sq. mm copper wire with painting of suitable colour etc.complete as directed and approved by engineer in charge.

Supply and Run of 2 of 6sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq. mm copper wire with painting of suitable colour etc.complete as directed and approved by engineer in charge.

Supplyandrunof2of4sq.mm.PVCinsulatedSCunsheathedFRLScopperconductorof1100VgradeinsuitableheavygaugeMSconduitpipeconcealedinwallandceilingwithcontinuousearthwireconnectionby4sq.mmcopperwire and making good of the concealed portion wiith suitable colour etc.complete as directed and approved by engineer in charge.

Supply, and fixing of 7w / 9W LEDlight with inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of 24W LED Round type Recessed fitting with LED on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer.. ( In Toilet )

Supply, installation, testing and commissioning of 80W LED Focus Light Fitting with LED with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete with 2 module 100W fan step regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") etc. complete as directed and approved by engineer incharge and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer..

Supply and run of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply and run of 1 of No.8 SWG GI wire for earth connection with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply ,Excavation and laying of HDPE Pipe 120mm / 103.50mm for electrical cable laying road crossing etc., complete and as directed by SIPCOT SIPCOT Officer..

Supply, laying, commissioning and testing of CAT 6A UTP Unarmoured Cable through 25mm PVC conduit .or as per the approval of site engineer incharge. painting of suitable colour etc.complete as directed and approved by engineer in charge.

Supply and installation of PVC Module Box with Face Plate Single Socket RJ-11/RJ45 back boxes with covers, with the crimping of appropriate jacks and all other necessary accessories telephone points fed through PVC insulated telephone cables inside 25 mm diameter PVC conduits etc., complete complying with standard specifications and as directed by site engineer incharge.

EPABX SYSTEM

Supply, installation, testing & Commissioning of 3 Trunk + 16 Analog Extensions. Expandable Up to 96 Analog Extension & 112 IP Port etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Basic Link Card for main system - To connect main system with expansion system. etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Caller ID Telephone with Speaker etc. complete and as directed by SIPCOT Officer..

Supply, Installation, commissioning, testing of Media converter for OFC cable single mode etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, Installation, commissioning, testing of LAN NETWORK SWITCHES -24 Port etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, laying, commissioning and testing of telephone cables through 25mm PVC conduit .or as per the approval of site engineer incharge.

Supply and installation of PVC Module Box with Face Plate Single Socket RJ-11/RJ45 back boxes with covers, with the crimping of appropriate jacks and all other necessary accessories telephone points fed through PVC insulated telephone cables inside 25 mm diameter PVC conduits etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, installation,9U Rack- RACK WITH ACCESSORIES inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Lightning protection System

Supply, and installation of 2mtr length Air termination rod 16/ 10 mm( Lightning rod) with necessary mounting accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of Lightning counter - LCD display and battery etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply, Installation, testing and commissioning of S.S test joint kit with required necessary accessories etc., complete complying with standard specification as per the approval of site engineer incharge.

Providing Maintenance Free earthing with Copper rod of 17.2 mm dia and 3m length for earth connection with earth conductors etc., complete complying with standard specification as per the approval of site engineer incharge.

Supply and run of 25mm X 6mm GI strip with necessary clamps/supports on wall/floor/ground for earth connection etc., complete complying with standard specification as per the approval of site engineer incharge.

CCTV surveillance system

Supply, installation, testing, commissioning of 5MP(2560×1920 Pixel) IP Bullet camera Optical Zoom:12X-16X,Field of View (Degree):more than 90-105, Focal length:3.3 mm – 10.2 mm suitable for indoor application, Smart Analytics, IR illumination Range(meter): 30M, Supported Protocols:HTTP,HTTPS,DNS,DDNS,TCP/IP,IPv4,IPv6,IEEE 802.1 all inclusive necessary supports for installation completion as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of 5MP(2560×1920 Pixel)5MP Varifocal Motorized Dome IP Camera ,30m IR, Micro SD Optical Zoom:12X-16X,Field of View (Degree):more than 110-130, Focal length:3.3 mm – 10.2 mm suitable for indoor application, Smart Analytics, Supported Protocols:HTTP,HTTPS,DNS,DDNS,TCP/IP,IPv4,IPv6,IEEE 802.1 all inclusive necessary supports for installation completion as per the recommended and approved by the SIPCOT Officer.

Supply, installation 65mm dia GI pipe (Class 'B') 4mtr height with 300mm x 300mm x 6mm base plate with duly welding (MR), MS box of 30cm x 20cm x 10cm with angle iron frame work with lock and key arrangements including Concreting and masonary work for fixing the post all inclusive necessary supports for installation of CCTV camera etc.completion as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make 16 Channel Network Video Recorder (NVR), Digital Sentry Network Video storage server, including all accessories as required for satisfactory completion as per the recommended and approved by the SIPCOT Officer.

Supply of approved make 8TB HDD as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make 8 Port POE Switch as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of Rack Mountable 24 port Patch Panels with SC and LC connector as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make Patch Cord 1M as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of Fiber Patch Panel 12 Port as per the recommended and approved by the SIPCOT Officer.

Supply installation testing and commissioning of 59.5-61.5 CM LED display with necessary mounting arrangements for CCTV monitoring as per the recommended and approved by the SIPCOT Officer.

Supplying and fixing of 20 Metre HDMI Cable with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply, laying, commissioning and testing of CAT 6A UTP Unarmoured Cable through 25mm PVC conduit .or as per the approval of site engineer incharge. painting of suitable colour etc.complete as directed and approved by engineer in charge.

B) Construction of Plug and Play and Warehouse Building at SIPCOT Mega Leather Park, Panapakkam in Ranipet District. (Package 4).

PLUG AND PLAY UNIT 1.

Civil Works

Providing Pre – Constructional Anti – Termite Treatment and creating a Chemical Barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, footings, column pits, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. Retaining / side walls, external perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining / side walls etc. as per instructions of chemical manufacturer and all as directed. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification.

Clearing light Jungle on road side including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness..etc., all complete in all respects complying with relevant standard specification and as directed by SIPCOT SIPCOT Officer.

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers. (including refilling)

0 to 2 m depth

Filling and levelling , intercarting the conveyed earth within a lead of 5Km, including necessary excavation, loading in trucks properly with a safer manner and tranporting to the required site and unloading at required location , spreading in layers of 200 mm thick , breaking of clots , removal of foreign materials, / lumps / unwanted vegetation etc., watering, consolidation to the required compaction , including necessary field tests to be carried out as per the direction of Department engineer in charge.

Providing Plain Cement Concrete 1:4:8(One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with standard specifications and as directed by "SIPCOT" officers. (in all heights and all depths)

Supplying and filling in foundation and basement with Stone dust/Quarry dust in layers of 150 mm thickness well watered ramming, consolidation etc. complete as per standard specifications and as directed by SIPCOT officers

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and as directed by SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

a) In foundation and basement upto 1.50 Mt from Ground Level.(-1.5 to +1.2 level)

b) in Ground floor

c) in first floor

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

a) For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete

b) For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works. (0-3 m)

c) For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.

Brick work in Cement Mortar 1:5 (One part Cement and five part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Foundation and basement

Brick work in Cement Mortar 1:6 (One part Cement and six part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

a) In Ground floor

b) First floor

Providing brick masonry partition wall 115 mm thick using II class ground moulded chamber burnt bricks of size 9" x 4.5" x 3" in cm 1:4 (one cement and four M sand ) including supplying and providing 2 nos. of 6 mm dia hoop reinforcement at every 4th layer, curing, raking out of the joints etc., complete compiling with standard specification.

in ground floor

Plastering with cement mortar 1:5 (One of cement and five of M sand) 12 mm thick finished with neat cement including, providing band cornice, ceiling cornice scaffolding curing etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting the new walls (Interior ) with two coats of approved emulsion paint in addition to one coat of approved primer over cement plastered wall surfaces etc. including cost of cement paint, brushes, etc., complete complying with standard specification and as directed by SIPCOT officers. (paints and its shade shall be got approved from the SIPCOT official before using)

Painting two coats of newly plastered External wall surface with ready mixed Weather proof Exterior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the SIPCOT SIPCOT Officer. before use on work

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by "the departmental" officers. (The steel rods must be Fe 500 grade of approved brand with ISI marking and necessary test certificate to be produced before using it at site)

Supplying and laying of ceramic tiles anti-skid 305 x 305 x 6 mm of approved special quality laid in cement mortar 1:3 (One of cement and three of sand) 20 mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc all complete in all respects complying with relevant specification and as directed by engineer in charge. Note: (The colour and quality shall be approved from the Engineer before use)

Dadooing walls with 300 x 200 x 6mm design joint free glazed tiles of EURO/ Kajaria or equivalent make as mentioned in the approved list of tiles set in Cement Mortar 1:2 (One Cement and Two M.sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq. m. neatly in all floors, curing, etc., complying with standard specification and as directed by the SIPCOT Officer.s.

Supplying and fixing of Double Charged Vitrified Tiles 800 x 800 x 10mm of best approved quality and colour laid in cement mortar 1:3 (One of cement and three of sand) 20 mm thick and pointed with coloured cement neatly including cutting to the required size and shape wherever necessary finishing neatly etc. all complete complying with relevant standard specification and as directed by the Engineer in charge. (The colour and quality of the tiles should be got approved by the Engineer before use)

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the SIPOCT SIPCOT Officer. before use on work

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc. ROLLING SHUTTERS (WITH ISI MONOGRAM)

Manually Operated (up to 8 sqm. Area)

Gear Operated Type (from 8 sqm. to 12 sqm. Area)

Supplying and fixing of PVC Sliding Door with Roller all complete complying with standard specification as directed by the SIPCOT Officer.

Supplying and fixing Solid panel PVC door with frame using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter etc., all complete complying with standard specification as directed by the SIPCOT Officer.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Supply and fixing of Pre-fabricated Structural Steel DECKING SHEET having minimum 345 Mpa yield Strength, colour coated Galvanised Structural Steel DECKING SHEET Zinc coating as per IS:277 of equivalent Standard. The structural decking panel shall have 955/ m² effective width (Overall Width of 931mm), nominal crest height 50 mm deeper shall have 2301mm centre to centre pitch with the thickness of 1.25 mm BMT for fixing us side of ribs for required length as per Concrete thickness at embossment (share grove) on top & side of ribs for better composite action and shall have the site (165mm Avg) with self drilled screws and EPDM wafers

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding,grinding, polishing, conveyance, electrical charges, etc.complete

Supply & Fixing of Ridge Vent sheet of 600 mm Girth out of 0.50 mm TCT Coated Galvalume sheets with necessary GI Frame work & wiremesh as per standard specification and as directed by the Engineer-in-charge.

Providing and Fixing of polyurethane foam for Sloped roofs thermal insulation panels or Sandwich insulated panels with external 0.50mm total coated thickness pre painted Galvalume sheet with trapezoidal roofing profile having crest height of 38mm at every 333mm span , whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free , high performance rigid polyurethane foam (PUF) conforming to IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as L flashing, C flashing etc& accessories such as screws, fasteners ,sealants etc for fixing the panel etc., complete complying with standard specification. 30mm (+38mm) thick PUF roof panel

Supplying, Fabrication & Fixing of Eaves Gutter/down comer pipe made out of 0.50 mm TCT Coated Galvalume sheets with necessary Strips, including cost of necessary fixing accessories, labour charges, scaffolding etc., all complete, as directed by the SIPCOT Officer.s. (make SAIL / JSW / Tata Bhushan)

Supply and fixing of Pre-fabricated Structural Steel, coated galvalume ROOFING/ WALL SHEET of 0.5mm thickness with SMP coating with colour bond XRW coating, having minimum of 550 Mpa yield strength, Coating 150 GSM as per ASTM 792 or equivalent standard. The structural roofing Panel shall have 1020 mm effective width, nominal 30 mm crest height at nominal 250 mm centre to centre pitch with the embossment (share grove) on top & side of ribs for better composite action including Flashing for joints, and all incidental charges.

Supplying and fixing of 6 mm thick Poly carbonate day light sheet including fabrication of truss work as per standard specification including, fixing of bolts / nuts and including cost of all materials, labour charges for fixing etc., all complete including scaffolding wherever necessary and as directed by SIPCOT Officer.s.

Designing the Semi Unitised Structural Glazing System with open groove joint as per design intent, preparation of shop drawings for approval, supply, fabricate, erect as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by the Dept. SIPCOT Officer..) Design the framing system (i.e. male & Female frame) to support vision panels, spandrel panels either with glass or aluminium composite panel, openable, window panels on a continuous framing supported between floors. Also design the split framing unutilized glazing system in case of strip or punched windows with vision panel proposed with either insulated / Monolithic glass, groove width in the system both in horizontal and vertical shall not be more than 20mm. Glazing of panel shall be done only at factory at the controlled atmosphere

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the SIPCOT Officer.

Dadooing for walls Supplying and fixing in position of colour glazed / matt finish designed wall tiles (for elevation) of any size 600 x 300 x10 mm thickness laid in cement mortar 1:2 (One of cement and two of sand) 10 mm thick for wall facing / duding, skirting over the plastered surfaces including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the Engineer in charge. Note: (The colour make and quality shall be approved from the Engineer before use)

Towards Materials and Labour charge for VDF flooring Finishing and Groove cutting for Car Parking , Scope of Work: Ms Channel Fixing 12' 6" c/c Concrete Laying , Leveling and Screed Vibrating using for Consolidating and leveling concrete, , Excess Water removing By VDF Method and finishing by power trowel Machine [ 3 level], Providing floor hardener Spreading [ Mixing] on concrete [ 4 kg sqmt fosroc make [, Groove cutting 4mm width ,depth of 10mm filling and finishing with [Chemical ]polysulphide sealant [ sika / Fosroc make ] Rmc concrete Supply by Client

Providing and laying with two-part elastomeric fuel resistance, UV resistant, Non-toxic once cured, resistant to flame, pouring grade liquid polysulphide sealant to fill the expansion joint, Control joints in parking area, construction joint in airport runway, Tanks, bridges & concrete roads. The sealant shall have Elongation min. 450% confirms to ASTM D 412, movement accommodation for butt joint 25% & for lap joints 50%. The sealant should meets the requirement of BS 5212, BS 4254 & ISO:11600. Ensure that apply a coat of polysulphide sealant primer @0.5L/m2 to get better adhesion on prepared surface before placing the sealant. The finished cost including surface preparation, filling foam backer rod, applying masking tape on both sides of the joint & polysulphide sealant filling on gap completely as per specification. 30mm width

Providing, fabricating and erecting in position M.S.hand railing consisting of top rail, mid rail & vertical posts of galvanized 32NB pipes with toe plates, base plates, other connections & fittings etc. painting with 2 coats of approved synthetic enamel paint over a shop coat of red oxide primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Internal Electrification

Sub-power power panel: Design, manufacture, supply, erection, testing and commissioning of main Power panel suitable for 415Volts 3Phase 4wire system, indoor/outdoor installation, made up of CRCA sheet steel of thickness not less than 2 mm with a weather proof canopy of top, double door construction, IP 55 protection, anti corrosive chemical resistant paint dust & vermin proof, cubicle type, floor mounted, undrilled gland plates at top / bottom, complete with internal wiring, ferrules, name plates,Locking System with heat shrinkable colour coded sleeve with SMC Bus bar supports with aluminium Busbar 250A, 50 kA, TPN 50 Hz, bus bars . The Panel should be fully comply to IEC 61439 part 1 & 2 of type tested assembly with incomer : 1 Nos - 250A, 4P, 50kA MCCB Microprocessor based releases (with Over current / Earth fault / Short circuit ) & Trip & close Coil feature with earthing, door interlock, automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming & outgoing cable sides of the circuit breaker metering for each Incomer and out goings: Load Manager with RS485 Interface with Maximum Demand Indication + controller, automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming & outgoing cable sides of the circuit breaker with associated protections MCB's, R,Y,B Phase Indicating lamps and control circuit as required and energy meter for out going feeders etc. Out going: 1Nos - 160A 4P Microprocessor based MCCB. 2 Nos - 125A 4P Microprocessor based MCCB. 12 Nos - 100A 4P Microprocessor based MCCB. with digital multifunctional meter with RS485 port and suitable CT etc. including concrete pedestal and associated civil works etc. complete and as approved and directed by SIPCOT Officer.

SPNDB: Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only etc.complete as directed and approved by engineer in charge.

1 PHASE UPS: Supply erection, testing, commissioning of 1 PHASE, 5KVA, UPS WITH BATTERY - 1 HOUR BACKUP with earth connection etc.complete as directed and approved by engineer in charge.

VTPNDB: Supply and fixing of 8way Industrial type Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board (with MCCB incomer) with double door (metal door) with 1 no. 160A 4P MCCB switch as incoming with SC & OC protection and 6 nos.63A 4P MCB switch , 8nos. 6A SP MCB as outgoing including suitable bus-bar connetion with suitable cable end box on suitable angle iron frame on wall with earth connection only etc. complete as directed and approved by engineer incharge

Distribution Board LDB : Supply and fixing of 6way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door with 1 no. 40A 4P MCB Isolator as incoming and 24 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only etc. complete as directed and approved by engineer incharge

Distribution Board PDB : Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door with 1 no. 63A 4P MCB Isolator as incoming and 18 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only etc. complete as directed and approved by engineer incharge

LT Cable and End Termination

Supply and laying of the following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc. complete and as directed by SIPCOT Officer..

From Utlility panel to Sub panel

3.5 core x 300 sq.mm. Ar. Alu. UG cable

3.5 core x 95 sq.mm. Ar. Alu. UG cable

3.5 core x 35 sq.mm. Ar. Alu. UG cable

3.5 core x 25 sq.mm. Ar. Alu. UG cable

4 core x 16 sq.mm. Ar. Alu. UG cable

3c x 10 sq.mm. Ar. Alu. UG cable

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete and as directed by SIPCOT Officer..

3.5 core x 300 sq.mm. Ar. Alu. UG cable

3.5 core x 95 sq.mm. Ar. Alu. UG cable

3.5 core x 35 sq.mm. Ar. Alu. UG cable

3.5 core x 25 sq.mm. Ar. Alu. UG cable

4 core x 16 sq.mm. Ar. Alu. UG cable

3c x 10 sq.mm. Ar. Alu. UG cable

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc. complete and as directed by SIPCOT Officer..

3.5 core x 300 sq.mm. Ar. Alu. UG cable

3.5 core x 95 sq.mm. Ar. Alu. UG cable

3.5 core x 35 sq.mm. Ar. Alu. UG cable

3.5 core x 25 sq.mm. Ar. Alu. UG cable

4 core x 16 sq.mm. Ar. Alu. UG cable

3c x 10 sq.mm. Ar. Alu. UG cable

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

Light point wiring

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Light point / fan point etc.complete as directed and approved by engineer in charge.

Power point wiring with GI box, socket & switch

Wiring with 2 x 2.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe Concealed in wall and ceiling with MS accessories with suitable Module GI switch box in flush wall with 1 no. 6A one way module switch and 1 no. 6A 5 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit Plug point etc.complete as directed and approved by engineer in charge.

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A/6A 3 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit 15A Plug point etc.complete as directed and approved by engineer in charge.

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit etc.complete as directed and approved by engineer in charge.

Circuit main wiring

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Continuous earth wire connection of 2.5 sq.mm copper wire with painting of Suitable colour etc.complete as directed and approved by engineer in charge.

Supply and Run of 2 of 6sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq. mm copper wire with painting of suitable colour etc.complete as directed and approved by engineer in charge.

Light Fixtures and fan

Supply, installation, testing and commissioning of 36W LED 2x2 square type Recessed fitting with LED on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer.. \

Supply, installation, testing and commissioning of 18W LED Round type Recessed fitting with LED on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT Officer.. ( In Toilet )

Supply, installation, testing and commissioning of 40W (2x20W), 4ft LED tube light fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of 150W LED cool day light highbay luminaries with more than 90% efficiency with inbuilt High Surge Protection with IP65 protection , glare free light, suitable for industrial high ceiling area day light colour LED inter connecting wiring including accessories all inclusive etc., complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of MIRROR Light 20W LED Batten inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply and fixing of 300mm (12") sweep AC exhaust fan complete with louvers shutters arrangements for 300mm (12") sweep etc complete as directed and approved by engineer incharge etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply & laying of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height Ladder type cable tray inside the electrical room etc. complete as directed and approved by engineer incharge and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer..

Supply and run of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply and run of 1 of No.8 SWG GI wire for earth connection with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply of 2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS etc. complete and as directed by SIPCOT Officer..

First Aid Box complete with all First Aid Medicinesetc. complete and as directed by SIPCOT Officer..

Shock Treatment Chart fixed in glass frame etc. complete and as directed by SIPCOT Officer..

EPABX System

Supply, installation, testing & Commissioning of 3 Trunk + 16 Analog Extensions. Expandable Up to 96 Analog Extension & 112 IP Port etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Basic Link Card for main system - To connect main system with expansion system. etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Basic Telephone without Caller ID etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Caller ID Telephone with Speaker etc. complete and as directed by SIPCOT Officer..

Supply, Installation, commissioning, testing of Media converter for OFC cable single mode etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, Installation, commissioning, testing of LAN NETWORK SWITCHES -24 Port etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, laying, commissioning and testing of telephone cables through 25mm PVC conduit .or as per the approval of site engineer incharge.

Supply and installation of PVC Module Box with Face Plate Single Socket RJ-11/RJ45 back boxes with covers, with the crimping of appropriate jacks and all other necessary accessories telephone points fed through PVC insulated telephone cables inside 25 mm diameter PVC conduits etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, installation,9U Rack- RACK WITH ACCESSORIES inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Solar Rooftop

Solar Rooftop: Supply, erection, testing, commissioning of Solar PV rooftop On Grid Plant comprising of followings, i) Solar panels of type Mono Crystalline, PERC, etc. ii) Power Conditioning Unit (PCU)with MPPT, Inverter, Controls, Protection Devices, Interconnecting D.C. cables, Connectors, Junction Boxes and accessories. iii) D.C. D.B iv) A.C. D.B v) A.C. cables and accessories vi) Lightning arrestor, earthing, etc. vii) Module Metallic Mounting Structures viii) Installation, Testing and Commissioning corresponds to BIS and IEC requirements etc.complete as directed and approved by engineer in charge.

Fire Alarm Control Panel

Internal Plumbing Works

Supplying and fixing of PVC 160mm dia pipe for rain water down fall pipe conforming to IS13592 with ISI mark and fittings conforming to IS 14735, with necessary C I gratings, shoes, bends, offsets, clamps, teak wood plugs, etc., of approved quality including fixing C.I. gratings at the junction of parapet and floor or roof slab, finishing etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

110mm dia

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. (The wash hand basin and specials should be got approved by the SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the SIPCOT SIPCOT Officer. before use on works) Floor Fitting

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the SIPCOT Officer.s. (The water closet should be got approved by the SIPCOT SIPCOT Officer. before use on works).

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the SIPCOT Officer.s. (The urinal should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the SIPCOT SIPCOT Officer. before use on woks)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing in position CP Two Way Bib Cock with Health Faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the SIPCOT SIPCOT Officer. before use on the works)

Supplying and fixing in position SS Heavy Duty Long Body Tap of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the SIPCOT SIPCOT Officer. before use on the works)

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the SIPCOT SIPCOT Officer. before use on works)

Construction of Inspection Chamber of inner clear size of 0.60 X 0.60 meters and average depth of 0.75 m with a base concrete of 100 mm thick cement concrete 1:4:8 (One cement, five sand and 8 aggregate) the chamber should be constructed in brick masonry 230 mm thick in cement mortar 1 : 5 using country brick of size 8 ¾ X 4 ¼ X 2 ¼ . The inner side of chamber plaster with cement mortar 1 : 3 -12 mm thick. The chamber top covered with R.C.C. precast slab 1 : 2 : 4 (one cement two sand and four aggregate) 7.5cm thick. The rate is including cost of materials labour etc completed including plastering with C.M. 1:3 -12 mm thick on inner side and top covered with RCC pre cast slab of 7.5 cm thick etc complete complying with standard specification

Supplying and fixing in position 150 X 100mm square mouth 'P' or 'S' trap stoneware Gully trap A grade with castiron gratings of size 150 X 150mm with C.I. air tight cover with frames of size 230 X 230mm at bottom and top respectively laid over a bed of brick jelly cement concrete 1:3:6 150mm thick using 40mm size broken brick jelly including neccessary brick work and plastering and including dismandling masonry wherever necessary and redoing the damaged portions to the original condition and by using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to the stonewere sewer line etc., complete complying with standard specifications (the stonewere gully trap should be got approved by the SIPCOT SIPCOT Officer. before use on works)

Supplying and fixing in position best quality CPVC (Chlorinated Poly Vinyl Chloride) Pipe (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio–11. pressure BIS mark and providing leak proof joints using CPVC adhesives including fixing to the wall with special CPVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including the cost of suitable CPVC specials /GM specials like Elbow, Tee reducers, Plug, union, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., testing for any leakages, etc., complete complying with standard specifications. (The CPVC pipes should be got approved by the SIPCOT SIPCOT Officer. before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

a) 25mm dia Concealed line

b) 32mm dia Concealed line

d) 32mm dia Below GL

Supplying and fixing the following diaPVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for soil line with relevant specials confirming to IS 14735 including jointing with seal ring confirming to IS 5382 with leaving a gap about 10mm to allow thermal expansion, fixing the pipes into walls with necessary wooden plug, screws, holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete in all respects and as directed by the SIPCOT SIPCOT Officer.

a) 110mm dia

b) 75mm dia

c) 50mm dia

d) 40mm dia

Supplying and fixing Polished Marble slab of size 1.22x0.61m, 18mm thick for urinal partition etc., as directed by SIPCOT SIPCOT Officer.

Providing and fixing of stainless steel toilet paper holder with necessary accessories ..etc complete as directed by SIPCOT SIPCOT Officer. .

Internal Firefighting

Internal Hydrant

Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the SIPCOT Officer.s.

Ground Floor

Mezzanine Floor

Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s. (Above Ground)

150mm dia

Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s.

150mm dia

Sprinkler System

Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s.

Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s. (Above Ground)

150mm dia

80mm dia

Supply, erection, testing and commissioning of GI Pipes for Sprinkler system

65mm dia

50mm dia

40mm dia

32mm dia

25mm dia

Supply, erection, testing and commissioning of Gun Metal Gate Valve (Heavy Duty)

65mm dia

Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s.

150mm dia

Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.

100mm dia

Extinguisher System

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the SIPCOT Officer.s. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Manufacturing Unit (Plug and Play)

Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. (Tranfomer yard & Electrical room) with Bucket Stand as per standard specifications and as directed by the SIPCOT Officer.s

Fire approval charges

PLUG AND PLAY UNIT 2

Civil Works

Providing Pre – Constructional Anti – Termite Treatment and creating a Chemical Barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, footings, column pits, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. Retaining / side walls, external perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining / side walls etc. as per instructions of chemical manufacturer and all as directed. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification.

Clearing light Jungle on road side including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness..etc., all complete in all respects complying with relevant standard specification and as directed by SIPCOT SIPCOT Officer.

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers. (including refilling)

0 to 2 m depth

Filling and levelling , intercarting the conveyed earth within a lead of 5Km, including necessary excavation, loading in trucks properly with a safer manner and tranporting to the required site and unloading at required location , spreading in layers of 200 mm thick , breaking of clots , removal of foreign materials, / lumps / unwanted vegetation etc., watering, consolidation to the required compaction , including necessary field tests to be carried out as per the direction of Department engineer in charge.

Providing Plain Cement Concrete 1:4:8(One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with standard specifications and as directed by "SIPCOT" officers. (in all heights and all depths)

Supplying and filling in foundation and basement with Stone dust/Quarry dust in layers of 150 mm thickness well watered ramming, consolidation etc. complete as per standard specifications and as directed by SIPCOT officers

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and as directed by SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

a) In foundation and basement upto 1.50 Mt from Ground Level.(-1.5 to +1.2 level)

b) in Ground floor

c) in first floor

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

a) For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete

b) For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works. (0-3 m)

c) For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.

Brick work in Cement Mortar 1:5 (One part Cement and five part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Foundation and basement

Brick work in Cement Mortar 1:6 (One part Cement and six part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

a) In Ground floor

b) First floor

Providing brick masonry partition wall 115 mm thick using II class ground moulded chamber burnt bricks of size 9" x 4.5" x 3" in cm 1:4 (one cement and four M sand ) including supplying and providing 2 nos. of 6 mm dia hoop reinforcement at every 4th layer, curing, raking out of the joints etc., complete compiling with standard specification.

in ground floor

Plastering with cement mortar 1:5 (One of cement and five of M sand) 12 mm thick finished with neat cement including, providing band cornice, ceiling cornice scaffolding curing etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting the new walls (Interior ) with two coats of approved emulsion paint in addition to one coat of approved primer over cement plastered wall surfaces etc. including cost of cement paint, brushes, etc., complete complying with standard specification and as directed by SIPCOT officers. (paints and its shade shall be got approved from the SIPCOT official before using)

Painting two coats of newly plastered External wall surface with ready mixed Weather proof Exterior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the SIPCOT SIPCOT Officer. before use on work

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by "the departmental" officers. (The steel rods must be Fe 500 grade of approved brand with ISI marking and necessary test certificate to be produced before using it at site)

Supplying and laying of ceramic tiles anti-skid 305 x 305 x 6 mm of approved special quality laid in cement mortar 1:3 (One of cement and three of sand) 20 mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc all complete in all respects complying with relevant specification and as directed by engineer in charge. Note: (The colour and quality shall be approved from the Engineer before use)

Dadooing walls with 300 x 200 x 6mm design joint free glazed tiles of EURO/ Kajaria or equivalent make as mentioned in the approved list of tiles set in Cement Mortar 1:2 (One Cement and Two M.sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq. m. neatly in all floors, curing, etc., complying with standard specification and as directed by the SIPCOT Officer.s.

Supplying and fixing of Double Charged Vitrified Tiles 800 x 800 x 10mm of best approved quality and colour laid in cement mortar 1:3 (One of cement and three of sand) 20 mm thick and pointed with coloured cement neatly including cutting to the required size and shape wherever necessary finishing neatly etc. all complete complying with relevant standard specification and as directed by the Engineer in charge. (The colour and quality of the tiles should be got approved by the Engineer before use)

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the SIPOCT SIPCOT Officer. before use on work

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc. ROLLING SHUTTERS (WITH ISI MONOGRAM)

Manually Operated (up to 8 sqm. Area)

Gear Operated Type (from 8 sqm. to 12 sqm. Area)

Supplying and fixing of PVC Sliding Door with Roller all complete complying with standard specification as directed by the SIPCOT Officer.

Supplying and fixing Solid panel PVC door with frame using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter etc., all complete complying with standard specification as directed by the SIPCOT Officer.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Supply and fixing of Pre-fabricated Structural Steel DECKING SHEET having minimum 345 Mpa yield Strength, colour coated Galvanised Structural Steel DECKING SHEET Zinc coating as per IS:277 of equivalent Standard. The structural decking panel shall have 955/ m² effective width (Overall Width of 931mm), nominal crest height 50 mm deeper shall have 2301mm centre to centre pitch with the thickness of 1.25 mm BMT for fixing us side of ribs for required length as per Concrete thickness at embossment (share grove) on top & side of ribs for better composite action and shall have the site (165mm Avg) with self drilled screws and EPDM wafers

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding,grinding, polishing, conveyance, electrical charges, etc.complete

Supply & Fixing of Ridge Vent sheet of 600 mm Girth out of 0.50 mm TCT Coated Galvalume sheets with necessary GI Frame work & wiremesh as per standard specification and as directed by the Engineer-in-charge.

Providing and Fixing of polyurethane foam for Sloped roofs thermal insulation panels or Sandwich insulated panels with external 0.50mm total coated thickness pre painted Galvalume sheet with trapezoidal roofing profile having crest height of 38mm at every 333mm span , whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free , high performance rigid polyurethane foam (PUF) conforming to IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as L flashing, C flashing etc& accessories such as screws, fasteners ,sealants etc for fixing the panel etc., complete complying with standard specification. 30mm (+38mm) thick PUF roof panel

Supplying, Fabrication & Fixing of Eaves Gutter/down comer pipe made out of 0.50 mm TCT Coated Galvalume sheets with necessary Strips, including cost of necessary fixing accessories, labour charges, scaffolding etc., all complete, as directed by the SIPCOT Officer.s. (make SAIL / JSW / Tata Bhushan)

Supply and fixing of Pre-fabricated Structural Steel, coated galvalume ROOFING/ WALL SHEET of 0.5mm thickness with SMP coating with colour bond XRW coating, having minimum of 550 Mpa yield strength, Coating 150 GSM as per ASTM 792 or equivalent standard. The structural roofing Panel shall have 1020 mm effective width, nominal 30 mm crest height at nominal 250 mm centre to centre pitch with the embossment (share grove) on top & side of ribs for better composite action including Flashing for joints, and all incidental charges.

Supplying and fixing of 6 mm thick Poly carbonate day light sheet including fabrication of truss work as per standard specification including, fixing of bolts / nuts and including cost of all materials, labour charges for fixing etc., all complete including scaffolding wherever necessary and as directed by SIPCOT Officer.s.

Designing the Semi Unitised Structural Glazing System with open groove joint as per design intent, preparation of shop drawings for approval, supply, fabricate, erect as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by the Dept. SIPCOT Officer..) Design the framing system (i.e. male & Female frame) to support vision panels, spandrel panels either with glass or aluminium composite panel, openable, window panels on a continuous framing supported between floors. Also design the split framing unutilized glazing system in case of strip or punched windows with vision panel proposed with either insulated / Monolithic glass, groove width in the system both in horizontal and vertical shall not be more than 20mm. Glazing of panel shall be done only at factory at the controlled atmosphere

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the SIPCOT Officer.

Dadooing for walls Supplying and fixing in position of colour glazed / matt finish designed wall tiles (for elevation) of any size 600 x 300 x10 mm thickness laid in cement mortar 1:2 (One of cement and two of sand) 10 mm thick for wall facing / duding, skirting over the plastered surfaces including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the Engineer in charge. Note: (The colour make and quality shall be approved from the Engineer before use)

Towards Materials and Labour charge for VDF flooring Finishing and Groove cutting for Car Parking , Scope of Work: Ms Channel Fixing 12' 6" c/c Concrete Laying , Leveling and Screed Vibrating using for Consolidating and leveling concrete, , Excess Water removing By VDF Method and finishing by power trowel Machine [ 3 level], Providing floor hardener Spreading [ Mixing] on concrete [ 4 kg sqmt fosroc make [, Groove cutting 4mm width ,depth of 10mm filling and finishing with [Chemical ]polysulphide sealant [ sika / Fosroc make ] Rmc concrete Supply by Client

Providing and laying with two-part elastomeric fuel resistance, UV resistant, Non-toxic once cured, resistant to flame, pouring grade liquid polysulphide sealant to fill the expansion joint, Control joints in parking area, construction joint in airport runway, Tanks, bridges & concrete roads. The sealant shall have Elongation min. 450% confirms to ASTM D 412, movement accommodation for butt joint 25% & for lap joints 50%. The sealant should meets the requirement of BS 5212, BS 4254 & ISO:11600. Ensure that apply a coat of polysulphide sealant primer @0.5L/m2 to get better adhesion on prepared surface before placing the sealant. The finished cost including surface preparation, filling foam backer rod, applying masking tape on both sides of the joint & polysulphide sealant filling on gap completely as per specification. 30mm width

Providing, fabricating and erecting in position M.S.hand railing consisting of top rail, mid rail & vertical posts of galvanized 32NB pipes with toe plates, base plates, other connections & fittings etc. painting with 2 coats of approved synthetic enamel paint over a shop coat of red oxide primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Internal Electrification

Sub-power power panel: Design, manufacture, supply, erection, testing and commissioning of main Power panel suitable for 415Volts 3Phase 4wire system, indoor/outdoor installation, made up of CRCA sheet steel of thickness not less than 2 mm with a weather proof canopy of top, double door construction, IP 55 protection, anti corrosive chemical resistant paint dust & vermin proof, cubicle type, floor mounted, undrilled gland plates at top / bottom, complete with internal wiring, ferrules, name plates,Locking System with heat shrinkable colour coded sleeve with SMC Bus bar supports with aluminium Busbar 250A, 50 kA, TPN 50 Hz, bus bars . The Panel should be fully comply to IEC 61439 part 1 & 2 of type tested assembly with incomer : 1 Nos - 250A, 4P, 50kA MCCB Microprocessor based releases (with Over current / Earth fault / Short circuit ) & Trip & close Coil feature with earthing, door interlock, automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming & outgoing cable sides of the circuit breaker metering for each Incomer and out goings: Load Manager with RS485 Interface with Maximum Demand Indication + controller, automatic safety shutters to shroud the bus bar side and FRP sheet barrier on the incoming & outgoing cable sides of the circuit breaker with associated protections MCB's, R,Y,B Phase Indicating lamps and control circuit as required and energy meter for out going feeders etc. Out going: 1Nos - 160A 4P Microprocessor based MCCB. 2 Nos - 125A 4P Microprocessor based MCCB. 12 Nos - 100A 4P Microprocessor based MCCB. with digital multifunctional meter with RS485 port and suitable CT etc. including concrete pedestal and associated civil works etc. complete and as approved and directed by SIPCOT Officer.

SPNDB: Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only etc.complete as directed and approved by engineer in charge.

1 PHASE UPS: Supply erection, testing, commissioning of 1 PHASE, 5KVA, UPS WITH BATTERY - 1 HOUR BACKUP with earth connection etc.complete as directed and approved by engineer in charge.

VTPNDB: Supply and fixing of 8way Industrial type Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board (with MCCB incomer) with double door (metal door) with 1 no. 160A 4P MCCB switch as incoming with SC & OC protection and 6 nos.63A 4P MCB switch , 8nos. 6A SP MCB as outgoing including suitable bus-bar connetion with suitable cable end box on suitable angle iron frame on wall with earth connection only etc. complete as directed and approved by engineer incharge

Distribution Board LDB : Supply and fixing of 6way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door with 1 no. 40A 4P MCB Isolator as incoming and 24 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only etc. complete as directed and approved by engineer incharge

Distribution Board PDB : Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door with 1 no. 63A 4P MCB Isolator as incoming and 18 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only etc. complete as directed and approved by engineer incharge

LT Cable and End Termination

Supply and laying of the following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc. complete and as directed by SIPCOT Officer..

From Utlility panel to Sub panel

3.5 core x 300 sq.mm. Ar. Alu. UG cable

3.5 core x 95 sq.mm. Ar. Alu. UG cable

3.5 core x 35 sq.mm. Ar. Alu. UG cable

3.5 core x 25 sq.mm. Ar. Alu. UG cable

4 core x 16 sq.mm. Ar. Alu. UG cable

3c x 10 sq.mm. Ar. Alu. UG cable

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete and as directed by SIPCOT Officer..

3.5 core x 300 sq.mm. Ar. Alu. UG cable

3.5 core x 95 sq.mm. Ar. Alu. UG cable

3.5 core x 35 sq.mm. Ar. Alu. UG cable

3.5 core x 25 sq.mm. Ar. Alu. UG cable

4 core x 16 sq.mm. Ar. Alu. UG cable

3c x 10 sq.mm. Ar. Alu. UG cable

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc. complete and as directed by SIPCOT Officer..

3.5 core x 300 sq.mm. Ar. Alu. UG cable

3.5 core x 95 sq.mm. Ar. Alu. UG cable

3.5 core x 35 sq.mm. Ar. Alu. UG cable

3.5 core x 25 sq.mm. Ar. Alu. UG cable

4 core x 16 sq.mm. Ar. Alu. UG cable

3c x 10 sq.mm. Ar. Alu. UG cable

3 R x 6 sq.mm. FLEXIBLE COPPER CABLE

Light point wiring

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Light point / fan point etc.complete as directed and approved by engineer in charge.

Power point wiring with GI box, socket & switch

Wiring with 2 x 2.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe Concealed in wall and ceiling with MS accessories with suitable Module GI switch box in flush wall with 1 no. 6A one way module switch and 1 no. 6A 5 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit Plug point etc.complete as directed and approved by engineer in charge.

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A/6A 3 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit 15A Plug point etc.complete as directed and approved by engineer in charge.

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit etc.complete as directed and approved by engineer in charge.

Circuit main wiring

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Continuous earth wire connection of 2.5 sq.mm copper wire with painting of Suitable colour etc.complete as directed and approved by engineer in charge.

Supply and Run of 2 of 6sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq. mm copper wire with painting of suitable colour etc.complete as directed and approved by engineer in charge.

Light Fixtures and fan

Supply, installation, testing and commissioning of 36W LED 2x2 square type Recessed fitting with LED on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer.. \

Supply, installation, testing and commissioning of 18W LED Round type Recessed fitting with LED on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT Officer.. ( In Toilet )

Supply, installation, testing and commissioning of 40W (2x20W), 4ft LED tube light fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of 150W LED cool day light highbay luminaries with more than 90% efficiency with inbuilt High Surge Protection with IP65 protection , glare free light, suitable for industrial high ceiling area day light colour LED inter connecting wiring including accessories all inclusive etc., complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of MIRROR Light 20W LED Batten inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply and fixing of 300mm (12") sweep AC exhaust fan complete with louvers shutters arrangements for 300mm (12") sweep etc complete as directed and approved by engineer incharge etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply & laying of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height Ladder type cable tray inside the electrical room etc. complete as directed and approved by engineer incharge and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer..

Supply and run of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply and run of 1 of No.8 SWG GI wire for earth connection with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply of 2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS etc. complete and as directed by SIPCOT Officer..

First Aid Box complete with all First Aid Medicinesetc. complete and as directed by SIPCOT Officer..

Shock Treatment Chart fixed in glass frame etc. complete and as directed by SIPCOT Officer..

EPABX System

Supply, installation, testing & Commissioning of 3 Trunk + 16 Analog Extensions. Expandable Up to 96 Analog Extension & 112 IP Port etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Basic Link Card for main system - To connect main system with expansion system. etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Basic Telephone without Caller ID etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Caller ID Telephone with Speaker etc. complete and as directed by SIPCOT Officer..

Supply, Installation, commissioning, testing of Media converter for OFC cable single mode etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, Installation, commissioning, testing of LAN NETWORK SWITCHES -24 Port etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, laying, commissioning and testing of telephone cables through 25mm PVC conduit .or as per the approval of site engineer incharge.

Supply and installation of PVC Module Box with Face Plate Single Socket RJ-11/RJ45 back boxes with covers, with the crimping of appropriate jacks and all other necessary accessories telephone points fed through PVC insulated telephone cables inside 25 mm diameter PVC conduits etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, installation,9U Rack- RACK WITH ACCESSORIES inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Solar Rooftop

Solar Rooftop: Supply, erection, testing, commissioning of Solar PV rooftop On Grid Plant comprising of followings, i) Solar panels of type Mono Crystalline, PERC, etc. ii) Power Conditioning Unit (PCU)with MPPT, Inverter, Controls, Protection Devices, Interconnecting D.C. cables, Connectors, Junction Boxes and accessories. iii) D.C. D.B iv) A.C. D.B v) A.C. cables and accessories vi) Lightning arrestor, earthing, etc. vii) Module Metallic Mounting Structures viii) Installation, Testing and Commissioning corresponds to BIS and IEC requirements etc.complete as directed and approved by engineer in charge.

Fire Alarm Control Panel

Internal Plumbing Works

Supplying and fixing of PVC 160mm dia pipe for rain water down fall pipe conforming to IS13592 with ISI mark and fittings conforming to IS 14735, with necessary C I gratings, shoes, bends, offsets, clamps, teak wood plugs, etc., of approved quality including fixing C.I. gratings at the junction of parapet and floor or roof slab, finishing etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

110mm dia

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. (The wash hand basin and specials should be got approved by the SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the SIPCOT SIPCOT Officer. before use on works) Floor Fitting

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the SIPCOT Officer.s. (The water closet should be got approved by the SIPCOT SIPCOT Officer. before use on works).

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the SIPCOT Officer.s. (The urinal should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the SIPCOT SIPCOT Officer. before use on woks)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by SIPCOT SIPCOT Officer. before use on works).

Supplying and fixing in position CP Two Way Bib Cock with Health Faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the SIPCOT SIPCOT Officer. before use on the works)

Supplying and fixing in position SS Heavy Duty Long Body Tap of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the SIPCOT SIPCOT Officer. before use on the works)

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the SIPCOT SIPCOT Officer. before use on works)

Construction of Inspection Chamber of inner clear size of 0.60 X 0.60 meters and average depth of 0.75 m with a base concrete of 100 mm thick cement concrete 1:4:8 (One cement, five sand and 8 aggregate) the chamber should be constructed in brick masonry 230 mm thick in cement mortar 1 : 5 using country brick of size 8 ¾ X 4 ¼ X 2 ¼ . The inner side of chamber plaster with cement mortar 1 : 3 -12 mm thick. The chamber top covered with R.C.C. precast slab 1 : 2 : 4 (one cement two sand and four aggregate) 7.5cm thick. The rate is including cost of materials labour etc completed including plastering with C.M. 1:3 -12 mm thick on inner side and top covered with RCC pre cast slab of 7.5 cm thick etc complete complying with standard specification

Supplying and fixing in position 150 X 100mm square mouth 'P' or 'S' trap stoneware Gully trap A grade with castiron gratings of size 150 X 150mm with C.I. air tight cover with frames of size 230 X 230mm at bottom and top respectively laid over a bed of brick jelly cement concrete 1:3:6 150mm thick using 40mm size broken brick jelly including neccessary brick work and plastering and including dismandling masonry wherever necessary and redoing the damaged portions to the original condition and by using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to the stonewere sewer line etc., complete complying with standard specifications (the stonewere gully trap should be got approved by the SIPCOT SIPCOT Officer. before use on works)

Supplying and fixing in position best quality CPVC (Chlorinated Poly Vinyl Chloride) Pipe (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio–11. pressure BIS mark and providing leak proof joints using CPVC adhesives including fixing to the wall with special CPVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including the cost of suitable CPVC specials /GM specials like Elbow, Tee reducers, Plug, union, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., testing for any leakages, etc., complete complying with standard specifications. (The CPVC pipes should be got approved by the SIPCOT SIPCOT Officer. before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

a) 25mm dia Concealed line

b) 32mm dia Concealed line

d) 32mm dia Below GL

Supplying and fixing the following diaPVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for soil line with relevant specials confirming to IS 14735 including jointing with seal ring confirming to IS 5382 with leaving a gap about 10mm to allow thermal expansion, fixing the pipes into walls with necessary wooden plug, screws, holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete in all respects and as directed by the SIPCOT SIPCOT Officer.

a) 110mm dia

b) 75mm dia

c) 50mm dia

d) 40mm dia

Supplying and fixing Polished Marble slab of size 1.22x0.61m, 18mm thick for urinal partition etc., as directed by SIPCOT SIPCOT Officer.

Providing and fixing of stainless steel toilet paper holder with necessary accessories ..etc complete as directed by SIPCOT SIPCOT Officer. .

Internal Firefighting

Internal Hydrant

Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the SIPCOT Officer.s.

Ground Floor

Mezzanine Floor

Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s. (Above Ground)

150mm dia

Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s.

150mm dia

Sprinkler System

Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s.

Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s. (Above Ground)

150mm dia

80mm dia

Supply, erection, testing and commissioning of GI Pipes for Sprinkler system

65mm dia

50mm dia

40mm dia

32mm dia

25mm dia

Supply, erection, testing and commissioning of Gun Metal Gate Valve (Heavy Duty)

65mm dia

Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s.

150mm dia

Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.

100mm dia

Extinguisher System

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the SIPCOT Officer.s. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Manufacturing Unit (Plug and Play)

Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. (Tranfomer yard & Electrical room) with Bucket Stand as per standard specifications and as directed by the SIPCOT Officer.s

Fire approval charges

WAREHOUSE

Civil Works

Providing Pre – Constructional Anti – Termite Treatment and creating a Chemical Barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, footings, column pits, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. Retaining / side walls, external perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining / side walls etc. as per instructions of chemical manufacturer and all as directed. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification.

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers. (including refilling)

0 to 2 m depth

Supplying and filling in foundation and basement with gravel in layers not exceeding 150 mm thickness well watered rammed and consolidated including cost of gravel complying etc. complete as per standard specifications and as directed by SIPCOT officers

Providing Plain Cement Concrete 1:4:8(One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with standard specifications and as directed by "SIPCOT" officers. (in all heights and all depths)

Supplying and filling in foundation and basement with Stone dust/Quarry dust in layers of 150 mm thickness well watered ramming, consolidation etc. complete as per standard specifications and as directed by SIPCOT officers

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and as directed by SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

a) In foundation and basement

b) In Ground floor (+1.2 to 5.7)

c) In first floor (+5.7 to 7.65)

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

a) For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete

b) For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works. (0-3 m)

c) For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.

Brick work in Cement Mortar 1:5 (One part Cement and five part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

a) For Foundation and basement

Towards Materials and Labour charge for VDF flooring Finishing and Groove cutting for Car Parking , Scope of Work: Ms Channel Fixing 12' 6" c/c Concrete Laying , Leveling and Screed Vibrating using for Consolidating and leveling concrete, , Excess Water removing By VDF Method and finishing by power trowel Machine [ 3 level], Providing floor hardener Spreading [ Mixing] on concrete [ 4 kg sqmt fosroc make [, Groove cutting 4mm width ,depth of 10mm filling and finishing with [Chemical ]polysulphide sealant [ sika / Fosroc make ] Rmc concrete Supply by Client

Plastering with cement mortar 1:5 (One cement and five M sand) 20 mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finishing, curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting two coats of newly plastered External wall surface with ready mixed Weather proof Exterior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the SIPCOT SIPCOT Officer. before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the SIPOCT SIPCOT Officer. before use on work

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc. ROLLING SHUTTERS (WITH ISI MONOGRAM)

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by "the departmental" officers. (The steel rods must be Fe 500 grade of approved brand with ISI marking and necessary test certificate to be produced before using it at site)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Supply and fixing of Pre-fabricated Structural Steel, coated galvalume ROOFING/ WALL SHEET of 0.5mm thickness with SMP coating with colour bond XRW coating, having minimum of 550 Mpa yield strength, Coating 150 GSM as per ASTM 792 or equivalent standard. The structural roofing Panel shall have 1020 mm effective width, nominal 30 mm crest height at nominal 250 mm centre to centre pitch with the embossment (share grove) on top & side of ribs for better composite action including Flashing for joints, and all incidental charges.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors excluding cost of priming coat etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.. (The make, quality and colour of paint should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Supplying, Fabrication & Fixing of Eaves Gutter made out of 0.50 mm TCT Coated Galvalume sheets with necessary Strips, including cost of necessary fixing accessories, labour charges, scaffolding etc., all complete, as directed by the SIPCOT Officer.s. (make SAIL / JSW / Tata Bhushan)

Providing and fixing of Turboventilator size 600mm high, 2540 mm perimeter weight 6.60 kg made of shaft 16mm 19 dia M.S bar crome plated, Fins made of aluminium Top plate and bottom ring made of stainless steel 304 grade, base of fibre UV rays stablilzed STD quality size 2mtr x 1mtr weight 8. 5 kg including cost of fixing arrangement complete in all respect and to the entire satisfaction of Engineer-inCharge.

Internal Electrification

ELDB SPNDB: Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only etc.complete as directed and approved by engineer in charge.

1 PHASE UPS: Supply erection, testing, commissioning of 1 PHASE, 2KVA, UPS WITH BATTERY - 1 HOUR BACKUP with earth connection etc.complete as directed and approved by engineer in charge.

VTPNDB: Supply and fixing of 8way Industrial type Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board (with MCCB incomer) with double door (metal door) with 1 no. 125A 4P MCCB switch as incoming with SC & OC protection and 6 nos.63A 4P MCB switch , 8nos. 6A SP MCB as outgoing including suitable bus-bar connetion with suitable cable end box on suitable angle iron frame on wall with earth connection only etc. complete as directed and approved by engineer incharge

Distribution Board LDB : Supply and fixing of 8 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door with 1 no. 40A 4P MCB Isolator as incoming and 24 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only etc. complete as directed and approved by engineer incharge

Distribution Board PDB : Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door with 1 no. 63A 4P MCB Isolator as incoming and 18 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only etc. complete as directed and approved by engineer incharge

LT Cable and End Termination

Supply and laying of the following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc. complete and as directed by SIPCOT Officer..

From LT panel to VTPN DB

3.5 core x 95 sq.mm. Ar. Alu. UG cable

Supply and laying of the following PVC armoured LTUG cable Supply and clamping including transport charges of UG cables

FromVTPN DB to PDB

3.5 core x 25 sq.mm. Ar. Alu. UG cable

FromVTPN DB to LDB

4 core x 16 sq.mm. Ar. Alu. UG cable

For UPS and ELDB

3 core x 6 sq.mm. FLEXIBLE COPPER CABLE

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc. complete and as directed by SIPCOT Officer..

3.5 core x 95 sq.mm. Ar. Alu. UG cable

3.5 core x 25 sq.mm. Ar. Alu. UG cable

4 core x 16 sq.mm. Ar. Alu. UG cable

3 core x 6 sq.mm. FLEXIBLE COPPER CABLE

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc. complete and as directed by SIPCOT Officer..

3.5 core x 95 sq.mm. Ar. Alu. UG cable

3.5 core x 25 sq.mm. Ar. Alu. UG cable

4 core x 16 sq.mm. Ar. Alu. UG cable

3 core x 6 sq.mm. FLEXIBLE COPPER CABLE

Light point wiring

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Light point / fan point etc.complete as directed and approved by engineer in charge.

Power point wiring with GI box, socket & switch

Wiring with 2 x 2.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe Concealed in wall and ceiling with MS accessories with suitable Module GI switch box in flush wall with 1 no. 6A one way module switch and 1 no. 6A 5 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit Plug point etc.complete as directed and approved by engineer in charge.

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A/6A 3 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit 15A Plug point etc.complete as directed and approved by engineer in charge.

Light/Fan circuit main wiring

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Continuous earth wire connection of 2.5 sq.mm copper wire with painting of Suitable colour etc.complete as directed and approved by engineer in charge.

Supply and Run of 2 of 6sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq. mm copper wire with painting of suitable colour etc.complete as directed and approved by engineer in charge.

Light Fixtures and fan

Supply, installation, testing and commissioning of 40W (2x20W), 4ft LED tube light fitting with cool day light made out of CRCA powder coated body, aluminium reflectors, poly carbonate diffuser, glare free light, suitable for surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing and commissioning of 100W LED cool day light highbay luminaries with more than 90% efficiency with inbuilt High Surge Protection with IP65 protection , glare free light, suitable for industrial high ceiling area day light colour LED inter connecting wiring including accessories all inclusive etc., complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing & Commissioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc. complete and as directed by SIPCOT Officer..

Supply and run of 25mm x 6mm GI Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply and run of 1 of No.8 SWG GI wire for earth connection with necessary clamps / supports on wall / floor / ground for earth connection etc. complete and as directed by SIPCOT Officer..

Supply of 2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS etc. complete and as directed by SIPCOT Officer..

First Aid Box complete with all First Aid Medicinesetc. complete and as directed by SIPCOT Officer..

Shock Treatment Chart fixed in glass frame etc. complete and as directed by SIPCOT Officer..

EPABX System & Telephone

Supply, installation, testing & Commissioning of 3 Trunk + 16 Analog Extensions. Expandable Up to 96 Analog Extension & 112 IP Port etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Basic Link Card for main system - To connect main system with expansion system. etc. complete and as directed by SIPCOT Officer..

Supply, installation, testing & Commissioning of Caller ID Telephone with Speaker etc. complete and as directed by SIPCOT Officer..

Supply, Installation, commissioning, testing of Media converter for OFC cable single mode etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, Installation, commissioning, testing of LAN NETWORK SWITCHES -24 Port etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, laying, commissioning and testing of telephone cables through 25mm PVC conduit .or as per the approval of site engineer incharge.

Supply and installation of PVC Module Box with Face Plate Single Socket RJ-11/RJ45 back boxes with covers, with the crimping of appropriate jacks and all other necessary accessories telephone points fed through PVC insulated telephone cables inside 25 mm diameter PVC conduits etc., complete complying with standard specifications and as directed by site engineer incharge.

Supply, installation,9U Rack- RACK WITH ACCESSORIES inter connecting wiring including accessories all inclusive etc. complete and as directed by SIPCOT SIPCOT Officer..

Solar Rooftop

Solar Rooftop: Supply, erection, testing, commissioning of Solar PV rooftop On Grid Plant comprising of followings, i) Solar panels of type Mono Crystalline, PERC, etc. ii) Power Conditioning Unit (PCU)with MPPT, Inverter, Controls, Protection Devices, Interconnecting D.C. cables, Connectors, Junction Boxes and accessories. iii) D.C. D.B iv) A.C. D.B v) A.C. cables and accessories vi) Lightning arrestor, earthing, etc. vii) Module Metallic Mounting Structures viii) Installation, Testing and Commissioning corresponds to BIS and IEC requirements etc.complete as directed and approved by engineer in charge.

Supply, installation, testing, commissioning of 5MP(2560×1920 Pixel)5MP Varifocal Motorized Dome IP Camera ,30m IR, Micro SD Optical Zoom:12X-16X,Field of View (Degree):more than 110-130, Focal length:3.3 mm – 10.2 mm suitable for indoor application, Smart Analytics, Supported Protocols:HTTP,HTTPS,DNS,DDNS,TCP/IP,IPv4,IPv6,IEEE 802.1 all inclusive necessary supports for installation completion as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make 16 Channel Network Video Recorder (NVR), Digital Sentry Network Video storage server, including all accessories as required for satisfactory completion as per the recommended and approved by the SIPCOT Officer.

Supply of approved make 8TB HDD as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make 8 Port POE Switch as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of Rack Mountable 24 port Patch Panels with SC and LC connector as per the recommended and approved by the SIPCOT Officer.

Supply, installation, testing, commissioning of approved make Patch Cord 1M as per the recommended and approved by the SIPCOT Officer.

Supply installation testing and commissioning of 59.5-61.5 CM LED display with necessary mounting arrangements for CCTV monitoring as per the recommended and approved by the SIPCOT Officer.

Supplying and fixing of 20 Metre HDMI Cable with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply, laying, commissioning and testing of CAT 6A UTP Unarmoured Cable through 25mm PVC conduit .or as per the approval of site engineer incharge. painting of suitable colour etc.complete as directed and approved by engineer in charge.

Fire Alarm Control Panel

Internal Firefighting

Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s. (Above Ground)

150mm dia

80mm dia

50mm dia

40mm dia

32mm dia

25mm dia

Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s.

150mm dia

Sprinkler System

Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officer.s.

Supply, erection, testing and commissioning of Gun Metal Gate Valve (Heavy Duty)

65mm dia

Providing fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia. Of pipes made out of GI / MS adjustable roads theaded for a sufficient length to adjest the height of support along with clamping arrangement for holding pipes of anchor fastening arrangements design of hanger and should confirm with specification.

100mm dia

Extinguisher System

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the SIPCOT Officer.s. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Manufacturing Unit (Plug and Play)

Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. (Tranfomer yard & Electrical room) with Bucket Stand as per standard specifications and as directed by the SIPCOT Officer.s

C) Providing Water Supply System including Construction of ELSR, GLSR, Pumproom & Providing Water Supply Networks at SIPCOT Mega Leather Park, Panapakkam in Ranipet District. (Package 5).

WATER UTILITY LOCATION 1

GLSR - Mechanical Items

Supply, laying and Jointing of DI Pipes and Fittings etc. complete as per standard specifications and as directed by SIPCOT officers.

Inlet

DI double flanged Bend - 300mm dia

DI welded double flanged pipe with puddle - 300mm dia - 2m standard length

Outlet

DI welded double flanged pipe with puddle - 200mm dia - 2m standard length

Overflow

DI welded double flanged pipe with puddle - 300mm dia - 2m standard length

Vent pipe

DI double flanged bend - 150mm dia (2 bends each for 6 locations)

DI pipe

Inlet pipe - DI K7 flanged pipe - 250mm dia - 1m length

Suction Pipe - DI K7 flanged pipe - 200mm dia - 1 m length

Delivery pipe - DI K7 flanged pipe - 300mm dia - - 1m length

Overflow pipe - DI K7 flanged pipe - 300mm dia - 1m length

Vent pipe - DI K7 flanged pipe - 150mm dia - 1m length

ELSR of 1 ML Water Utility 1

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers (excluding refilling)

Extra for every additional 1 metre lift or part thereof overthe initial lift

Foundation 2 to 3.0m depth

Refilling with excavated soil (other than sand) in layers of 150 mm thickness well watered ramming, consolidation etc. complete as per standard specifications and as directed by SIPCOT officers

DIsposal of excavated earth with a lead of 2 km including conveyance and all labours as directed by SIPCOT officers

Providing Plain Cement Concrete 1:4:8(One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with standard specifications and as directed by "SIPCOT" officers. (in all heights and all depths)

Supplying and filling in foundation and basement with Stone dust/Quarry dust in layers of 100 mm thickness well watered ramming, consolidation etc. complete as per standard specifications and as directed by SIPCOT officers

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 400 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and as directed by SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

Below 1.50 m to 4.50 m depth from GL

Upto 1.50 m below GL upto plinth level

Above G.L upto 4.50m height

Above 4.50m to 7.32m ht., from G.L

Above 7.32m to 10.98m ht., from G.L

Above 10.98m to 14.64m ht., from G.L

Above 14.64 to 18.30m ht., from G.L

Above 18.30m ht., to 21.96m from G.L

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete

For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.

Upto 1.50 m below GL upto plinth level

Above G.L upto 3.30m height

Above 3.30m to 4.30m ht., from G.L

Above 4.30m to 5.30m ht., from G.L

Above 5.30m to 6.30m ht., from G.L

Above 6.30m to 7.30m ht., from G.L

Above 7.30m to 8.30m ht., from G.L

Above 8.30m to 9.30m ht., from G.L

Above 9.30m to 10.30m ht., from G.L

Above 10.30m to 11.30m ht., from G.L

Above 11.30m to 12.30m ht., from G.L

Above 12.30m to 13.30m ht., from G.L

Above 13.30m to 14.30m ht., from G.L

Above 14.30m to 15.30m ht., from G.L

Above 15.30m to 16.30m ht., from G.L

Above 16.30m to 17.30m ht., from G.L

Above 17.30m to 18.30m ht., from G.L

Above 18.30 to 19.30m ht., from G.L

Above 19.30m ht., to 20.30m from G.L

Above 20.30m ht., to 21.30m from G.L

Above 21.30m ht., to 22.30m from G.L

For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works. (0-3.30 m)

Upto 1.50 m below GL upto plinth level

Above G.L upto 4.50m height

Above 7.30m to 8.3m ht., from G.L

Above 11.30m to 12.30m ht., from G.L

Above 15.30 to 16.30m ht., from G.L

Above 20.30m ht., to 21.30m from G.L

For RCC surface of Vertical curved surface and other similar works.

Above 16.30 to 17.30m ht., from G.L

Above 17.30 to 18.30m ht., from G.L

Above 18.30 to 19.30m ht., from G.L

Above 19.30 to 20.30m ht., from G.L

Above 20.30 to 21.30m ht., from G.L

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by "SIPCOT" officers. (The steel rods must be Fe 500 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Providing, fabricating and erecting in position M.S.hand railing consisting of top rail, mid rail & vertical posts of galvanized 32NB pipes with toe plates, base plates, other connections & fittings etc. painting with 2 coats of approved synthetic enamel paint over a shop coat of red oxide primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors excluding cost of priming coat etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.. (The make, quality and colour of paint should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Painting the new walls (Interior & Exterior) with two coats of approved cement paint in addition to one coat of approved primer over cement plastered wall surfaces etc. including cost of cement paint, brushes, etc., complete complying with standard specification and as directed by SIPCOT officers. (paints and its shade shall be got approved from the SIPCOT official before using)

Providing and fixing of circular FRC manhole cover with frame of size 600mm dia etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Supplying and laying of 160 mm dia PVC 6kg/cm2pipe for rain water collection from catch basin to Storm water drain conforming to IS13592 with ISI mark and fittings conforming to IS 14735, with necessary solvent cement of approved quality for jointing,laying etc., complete complying with the standard specificaiton and as directed by SIPCOT officers.

Providing brick masonry partition wall 115 mm thick using II class ground moulded chamber burnt bricks of size 9" x 4.5" x 3" in cm 1:4 (one cement and four M sand ) including supplying and providing 2 nos. of 6 mm dia hoop reinforcement at every 4th layer, curing, raking out of the joints etc., complete compiling with standard specification.

Plastering with cement mortar 1:5 (One cement and five M sand) 20 mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finishing, curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Providing rain water harvesting system as per the drawing including necessary earth work, 300 mm dia boring up to 4.0m depth, providing 160 mm dia pvc pipes up to 4.0m, filling materials as specified etc, complete complying with standard specifications and as directed by "SIPCOT" officers (Inner size of chamber 1.00m x1.00mx1.05m )

Labour charges for Painting SIPCOT Board Emblem in accordance with the size and specifications as approved by the SIPCOT on the Pump room,GLSR & ELSR including cost of all consumables, one coat of base paint, scaffolding charges including painting. (WD-W0745) etc., complete complying with standard specification and as directed by SIPCOT officers.

Supply of Early Streamer Emission Air Terminal (ESEAT). Model: S The ESEAT has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere. The Air terminal is non-radioactive and requires no special licensing. The unit is fully autonomous (no battery, no external power supply is required ), collects energy from the ambient electric field.The ESEAT model has been tested in a high voltage laboratory in accordance with NFC 17 102 in order to measure the average gain in triggering. The average gain in triggering time (”Ts) obtained during the lab test for the offered model is 60 μs. The ESEAT works on negative as well as positively polarized discharges. ESEAT has been tested for such discharges in Central Power Research Institute (CPRI). A dedicated tester is avilable to test the healthiness of the ESEAT on request (Page No. 37, Point No. 3 of Clause 8.6 of the Revised NFC 17-102 version 2011 ). ESEAT Model : S - Radius of protection : 46 Metres Level of protection considered for the Project-II leve etc., complete complying with standard specification and as directed by SIPCOT officers.

supply of avaiation light make : richlight

Supply, laying and Jointing of DI Pipes and Fittings etc. complete as per standard specifications and as directed by SIPCOT officers.

Inlet

DI double flanged Bend - 300mm

Outlet

DI double flanged Bend - 350mm

Overflow

DI double flanged Bend - 300mm

Butterfly valves

Manufacturing, supply and delivery of resilient seated wafer type butterfly valve in accordance with EN 593, centric disk mounted in three maintenance-free bearing bushes, tight in both flow directions, Replaceable rubber sleeve with integrated seal for functionally reliable use for flared flanges, welding flanges, PE flanges as well as loose flanges with V-collar, Stable seat due to collar with vulcanized support ring. Vaccum tight upto 1 Torr. Face to face length acc.to 558-1, basic series 20(DIN 3202/k1). With Electrostatic epoxy powder coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270.(EP-P it is resi-coat powder approved for drinking water application, applied through fusion bonding technology process by dipping the shot-blasted casted components heated upto 200 deg C) including all accessories etc., complete complying with standard specification and as directed by SIPCOT officers.

Inlet

300 mm dia. butterfly valves

Outlet

350 mm dia. butterfly valves

Drain

300 mm dia. butterfly valves

DI Pipe - Spigot Type

Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 and including all fittings, trenching and refilling & testing of joints complete as per direction of Engineer in Charge.

Inlet

300 mm dia Ductile Iron Class K-7 pipes ( From pump house to bottom of OHT)

DI Pipe - Flanged type

Inlet

300mm dia Ductile Iron K7 flanged pipe - 3 m standard length ( For Vertical arrangement pipe ELSR)

Outlet

350mm dia Ductile Iron K7 flanged pipe - 3 m standard length

Overflow and drain

350mm dia Ductile Iron K7 flanged pipe - 3 m standard length

Puddle flange

Inlet

DI welded double flanged pipe with puddle - 300mm dia - 2m standard length

Outlet

DI welded double flanged pipe with puddle - 350mm dia - 2m standard length

Overflow

DI welded double flanged pipe with puddle - 300mm dia - 2m standard length

Drain

DI welded double flanged pipe with puddle - 300mm dia - 2m standard length

Enlarger

Inlet

DI Double flanged enlarger - 350mm x 300mm

Bellmouth for inlet pipe inside the tank 300mm flanged end. etc., complete complying with standard specification and as directed by SIPCOT officers.

Supply, delivery and installation of water level measuring system up to 1 mm accuracy to measure up to 30 m depth in wells/OHTs/ sumps with suitable sensor, level transducer with transmitter, 2 or 4 wire loop, all wetted parts in SS304 or above and with Remote control and suitable LED display unit easily readable upto 10m distance, cabinet to house remote display unit, Low/High alarm with suitable speaker, suitable cables with data storage capacity for 1 year and data transfer facility and with all required accessories including 1 year free replacement warranty etc., complete complying with standard specification and as directed by SIPCOT officers.

Providing and fixing of AC cowl of 100mm dia with necessary arrangements etc., complete complying with standard specification and as directed by SIPCOT officers.

Potable Pump House

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and leveling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers

Refilling with excavated soil (other than sand) in layers of 150 mm thickness well watered ramming, consolidation etc. complete as per standard specifications and as directed by SIPCOT officers

Supplying and filling in foundation and basement with Stone dust/Quarry dust in layers of 150 mm thickness well watered ramming, consolidation etc. complete as per standard specifications and as directed by SIPCOT officers

Providing Plain Cement Concrete 1:3:6(One cement, three sand and six Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with standard specifications and as directed by "SIPCOT" officers. (in all heights and all depths)

Brick work in Cement Mortar 1:5 (One part Cement and five part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Brick work in Cement Mortar 1:6 (One part Cement and six part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Ground floor (0 to 4.5m )

First floor (4.5m to 7.32m)

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and as directed by SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

Foundation and basement

Above GL

Above 4.50 m height

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

Below GL

Foundation and basement

Above GL - Beam

Column

Foundation and Basement

Up to 3.30m

Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete as directed by SIPCOT SIPCOT Officer..(TWAD SOR 2022-23,Pg-91,T.no-20.0)

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the SIPOCT SIPCOT Officer. before use on work

Supplying and fixing mild steel grills for windows, ventilators veranda enclosure, ladder and gate as per the design approved including one coat of primer and labour for fixing in position etc, all complete complying with standard specifications and as directed by "SIPCOT" officers. (The design of grill should be got approved from the SIPCOT SIPCOT Officer. before use)

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer’s specifications etc, all complete complying with standard specifications and as directed by "SIPCOT" officers

Weathering course with broken brick jelly lime concrete using 40 to 20 mm gauge broken brick jelly in pure slaked lime (no sand) over roof slab to the proportion of brick jelly to lime (fat lime) being 32 : 12 1 /2 by volume well beaten with wooden beaters, for giving the required slope and thickness including laying and finishing, etc, all complete complying with standard specifications and as directed by "SIPCOT" officers

Finishing the top of roof slab with one course of hydraulically pressed tile of approved superior quality of size 23 cm x 23 cm, 20 mm thick laid over weathering course in cement mortar 1:3 (One of cement and three of M sand) 12 mm thick, mixed with water proofing compound at 2% by weight of cement used and pointed neatly with the same cement mortar mixed with water proofing compound including curing etc., complete in all respects complying with relevant standard specifications and as directed by the engineer in charge. (Note: Tiles to be got approved by the SIPCOT SIPCOT Officer. before use and only one particular size pressed tiles should be used for one type of building)

Plastering with cement mortar 1:5 (One of cement and five of M sand) 12 mm thick finished with neat cement including, providing band cornice, ceiling cornice scaffolding curing etc., complete complying with standard specification and as directed by SIPCOT officers.

Plastering with cement mortar 1:5 (One cement and five M sand) 20 mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finishing, curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting the new walls (Interior ) with two coats of approved cement paint in addition to one coat of approved primer over cement plastered wall surfaces etc. including cost of cement paint, brushes, etc., complete complying with standard specification and as directed by SIPCOT officers. (paints and its shade shall be got approved from the SIPCOT official before using)

Painting the new walls (Interior ) with two coats of approved cement paint in addition to one coat of approved primer over cement plastered wall surfaces etc. including cost of cement paint, brushes, etc., complete complying with standard specification and as directed by SIPCOT officers. (paints and its shade shall be got approved from the SIPCOT official before using)

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors excluding cost of priming coat etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.. (The make, quality and colour of paint should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by "SIPCOT" officers. (The steel rods must be Fe 500 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etcGear Operated Type (from 8 sqm. to 12 sqm. Area)

Supplying and fixing of 110 mm dia PVC pipe for rain water down fall pipe conforming to IS13592 with ISI mark and fittings conforming to IS 14735, with necessary C I gratings, shoes, bends, offsets, clamps, teak wood plugs, etc., of approved quality including fixing C.I. gratings at the junction of parapet and floor or roof slab, finishing etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Providing rain water harvesting system as per the drawing including necessary earth work, 300 mm dia boring up to 4.0m depth, providing 160 mm dia pvc pipes up to 4.0m, filling materials as specified etc, complete complying with standard specifications and as directed by "SIPCOT" officers (Inner size of chamber 1.00m x1.00mx1.05m )

Labour charges for Painting SIPCOT Board Emblem in accordance with the size and specifications as approved by the SIPCOT on the Pump room,GLSR & ELSR including cost of all consumables, one coat of base paint, scaffolding charges including painting. (WD-W0745)

Pipes and fittings

Suctionn Pipes

200mm dia Ductile Iron K7 flanged pipe - 1 m standard length

Common header - Delivery

300mm dia Ductile Iron K7 flanged pipe - 1 m standard length

Strainer

Strainer - 200mm dia

Butterfly valves

Manufacturing, supply and delivery of resilient seated wafer type butterfly valve in accordance with EN 593, centric disk mounted in three maintenance-free bearing bushes, tight in both flow directions, Replaceable rubber sleeve with integrated seal for functionally reliable use for flared flanges, welding flanges, PE flanges as well as loose flanges with V-collar, Stable seat due to collar with vulcanized support ring. Vaccum tight upto 1 Torr. Face to face length acc.to 558-1, basic series 20(DIN 3202/k1). With Electrostatic epoxy powder coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270.(EP-P it is resi-coat powder approved for drinking water application, applied through fusion bonding technology process by dipping the shot-blasted casted components heated upto 200 deg C) including all accessories complete as per direction of Engineer in Charge.

200 mm dia. butterfly valves

Dismantling joint

DI Dismantling joint - 200mm dia.

Equal Tee - Suction

DI All flanged Tee - 300mm x 300mm x 200mm

Equal Tee - Delivery

DI All flanged Tee - 300mm x 300mm x 300mm

Individual header - Suction

200mm dia Ductile Iron K7 flanged pipe - 1 m standard length

Individual header - Delivery

300mm dia Ductile Iron K7 flanged pipe - 1 m standard length

Individual header - Suction - Butterfly valve

Manufacturing, supply and delivery of resilient seated wafer type butterfly valve in accordance with EN 593, centric disk mounted in three maintenance-free bearing bushes, tight in both flow directions, Replaceable rubber sleeve with integrated seal for functionally reliable use for flared flanges, welding flanges, PE flanges as well as loose flanges with V-collar, Stable seat due to collar with vulcanized support ring. Vaccum tight upto 1 Torr. Face to face length acc.to 558-1, basic series 20(DIN 3202/k1). With Electrostatic epoxy powder coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270.(EP-P it is resi-coat powder approved for drinking water application, applied through fusion bonding technology process by dipping the shot-blasted casted components heated upto 200 deg C) including all accessories complete as per direction of Engineer in Charge.

200 mm dia. butterfly valves

Individual header - Delivery - Butterfly valve

Manufacturing, supply and delivery of resilient seated wafer type butterfly valve in accordance with EN 593, centric disk mounted in three maintenance-free bearing bushes, tight in both flow directions, Replaceable rubber sleeve with integrated seal for functionally reliable use for flared flanges, welding flanges, PE flanges as well as loose flanges with V-collar, Stable seat due to collar with vulcanized support ring. Vaccum tight upto 1 Torr. Face to face length acc.to 558-1, basic series 20(DIN 3202/k1). With Electrostatic epoxy powder coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270.(EP-P it is resi-coat powder approved for drinking water application, applied through fusion bonding technology process by dipping the shot-blasted casted components heated upto 200 deg C) including all accessories complete as per direction of Engineer in Charge.

300 mm dia. butterfly valves

Individual header - Suction - Dismantling joint

200mm dia. DI Dismantling joint

Individual header - Delivery - Dismantling joint

300mm dia. DI Dismantling joint

Individual header - Suction - Double flanged reducer

DI Double flanged reducer - 200mm x 150mm

Individual header - Delivery - Double flanged reducer

DI Double flanged reducer - 300mm x 250mm

Electromagnetic Flow Meter

GLSR 2000 Cum- Water Utility Location 2

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers (excluding refilling)

a) 0 to 2.00m depth

b) 2 to 3m depth

Refilling with excavated soil (other than sand) in layers of 150 mm thickness well watered ramming, consolidation etc. complete as per standard specifications and as directed by SIPCOT officers

DIsposal of excavated earth with a lead of 2 km including conveyance and all labours as directed by SIPCOT officers

Providing and laying plain cement concrete pavement with CC1:2:4 (one of cement : two of Msand: four of hard broken stone jelly 20 mm nominal size) including laying, curing, finishing etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying and filling in foundation and basement with Stone dust/Quarry dust in layers of 150 mm thickness well watered ramming, consolidation etc. complete as per standard specifications and as directed by SIPCOT officers

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 400 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and as directed by SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

1.50m depth and upto 4.5m depth below ground level

Upto 1.50 m below GL && upto plinth level

Ground floor (0 to 4.5m )

1 floor (4.5m to 7.32m)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

a) For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete

b) For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works. (0-3.30 m)

d) For RCC surface of Vertical curved surface and other similar works.

Up to 3.30m

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by "SIPCOT" officers. (The steel rods must be Fe 500 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

R.T.S rods M.S..rods of first grade steel

Providing 40mm thick granolithic flooring with plain cement concrete 1:1.5:3 (one cement one and half sand, three aggregate) using 10 mm to 12 mm broken stone jelly and top subbed smooth etc, all complete complying with standard specifications and as directed by "SIPCOT" officers

Providing and fixing of safety foot rest of polypropylene rungs 265mmx175mmx25mm and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes/chambers/sump etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Providing and fixing of circular FRC manhole cover with frame of size 600mm dia etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Painting the new walls (Interior & Exterior) with two coats of approved cement paint in addition to one coat of approved primer over cement plastered wall surfaces etc. including cost of cement paint, brushes, etc., complete complying with standard specification and as directed by SIPCOT officers. (paints and its shade shall be got approved from the SIPCOT official before using)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 330 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and as directed by SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

Providing & Laying soling stone with rubbles 23 cm thick including cost of materials, laying etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Supplying and fixing ultrasonic level indicator with display units 0.4 to 10 m range - 24v, 50 KHz DC with suitable power pack,- 4 - 20 mA and large display unit and suitable enclosure with IP 67 protection as per the standard.Complete with all hardware / accessories required / interconnection cables for erection & commissioning.etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Providing, fabricating and erecting in position M.S.hand railing consisting of top rail, mid rail & vertical posts of galvanized 32NB pipes with toe plates, base plates, other connections & fittings etc. painting with 2 coats of approved synthetic enamel paint over a shop coat of red oxide primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors excluding cost of priming coat etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.. (The make, quality and colour of paint should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Supplying and laying of 160 mm dia PVC 6kg/cm2pipe for rain water collection from catch basin to Storm water drain conforming to IS13592 with ISI mark and fittings conforming to IS 14735, with necessary solvent cement of approved quality for jointing,laying etc., complete complying with the standard specificaiton and as directed by SIPCOT officers.

Providing brick masonry partition wall 115 mm thick using II class ground moulded chamber burnt bricks of size 9" x 4.5" x 3" in cm 1:4 (one cement and four M sand ) including supplying and providing 2 nos. of 6 mm dia hoop reinforcement at every 4th layer, curing, raking out of the joints etc., complete compiling with standard specification.

Plastering with cement mortar 1:5 (One cement and five M sand) 20 mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finishing, curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Providing rain water harvesting system as per the drawing including necessary earth work, 300 mm dia boring up to 4.0m depth, providing 160 mm dia pvc pipes up to 4.0m, filling materials as specified etc, complete complying with standard specifications and as directed by "SIPCOT" officers (Inner size of chamber 1.00m x1.00mx1.05m )

Labour charges for Painting SIPCOT Board Emblem in accordance with the size and specifications as approved by the SIPCOT on the Pump room,GLSR & ELSR including cost of all consumables, one coat of base paint, scaffolding charges including painting. (WD-W0745)

Pipes and fittings

Inlet

DI double flanged Bend - 300mm

DI welded double flanged pipe with puddle - 300mm - 2m standard length

Outlet

Suction - Foot Valve - 350 mm DI

DI welded double flanged pipe with puddle - 350mm dia - 2m standard length

Overflow

DI welded double flanged pipe with puddle - 300mm dia - 2m standard length

Vent pipe

DI double flanged bend - 150mm dia (2 bends each for 6 locations)

DI pipe

Inlet pipe - DI K7 flanged pipe - 250mm dia - 1m length

Suction Pipe - DI K7 flanged pipe - 350mm dia - 1 m length

Delivery pipe - DI K7 flanged pipe - 500mm dia - - 1m length

Overflow pipe - DI K7 flanged pipe - 300mm dia - 1m length

Vent pipe - DI K7 flanged pipe - 150mm dia - 1m length

Providing and fixing of AC cowl of 100mm dia with necessary arrangements as directed by SIPCOT SIPCOT Officer.

ELSR of 1 ML Water Utility 2

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers (excluding refilling)

Extra for every additional 1 metre lift or part thereof overthe initial lift

Foundation 2 to 3.0m depth

Refilling with excavated soil (other than sand) in layers of 150 mm thickness well watered ramming, consolidation etc. complete as per standard specifications and as directed by SIPCOT officers

DIsposal of excavated earth with a lead of 2 km including conveyance and all labours as directed by SIPCOT officers

Providing Plain Cement Concrete 1:4:8(One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with standard specifications and as directed by "SIPCOT" officers. (in all heights and all depths)

Supplying and filling in foundation and basement with Stone dust/Quarry dust in layers of 100 mm thickness well watered ramming, consolidation etc. complete as per standard specifications and as directed by SIPCOT officers

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 400 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and as directed by SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

Below 1.50 m to 4.50 m depth from GL

Upto 1.50 m below GL upto plinth level

Above G.L upto 4.50m height

Above 4.50m to 7.32m ht., from G.L

Above 7.32m to 10.98m ht., from G.L

Above 10.98m to 14.64m ht., from G.L

Above 14.64 to 18.30m ht., from G.L

Above 18.30m ht., to 21.96m from G.L

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete

For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.

Upto 1.50 m below GL upto plinth level

Above G.L upto 3.30m height

Above 3.30m to 4.30m ht., from G.L

Above 4.30m to 5.30m ht., from G.L

Above 5.30m to 6.30m ht., from G.L

Above 6.30m to 7.30m ht., from G.L

Above 7.30m to 8.30m ht., from G.L

Above 8.30m to 9.30m ht., from G.L

Above 9.30m to 10.30m ht., from G.L

Above 10.30m to 11.30m ht., from G.L

Above 11.30m to 12.30m ht., from G.L

Above 12.30m to 13.30m ht., from G.L

Above 13.30m to 14.30m ht., from G.L

Above 14.30m to 15.30m ht., from G.L

Above 15.30m to 16.30m ht., from G.L

Above 16.30m to 17.30m ht., from G.L

Above 17.30m to 18.30m ht., from G.L

Above 18.30 to 19.30m ht., from G.L

Above 19.30m ht., to 20.30m from G.L

Above 20.30m ht., to 21.30m from G.L

Above 21.30m ht., to 22.30m from G.L

For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works. (0-3.30 m)

Upto 1.50 m below GL upto plinth level

Above G.L upto 4.50m height

Above 7.30m to 8.3m ht., from G.L

Above 11.30m to 12.30m ht., from G.L

Above 15.30 to 16.30m ht., from G.L

Above 20.30m ht., to 21.30m from G.L

For RCC surface of Vertical curved surface and other similar works.

Above 16.30 to 17.30m ht., from G.L

Above 17.30 to 18.30m ht., from G.L

Above 18.30 to 19.30m ht., from G.L

Above 19.30 to 20.30m ht., from G.L

Above 20.30 to 21.30m ht., from G.L

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by "SIPCOT" officers. (The steel rods must be Fe 500 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Providing, fabricating and erecting in position M.S.hand railing consisting of top rail, mid rail & vertical posts of galvanized 32NB pipes with toe plates, base plates, other connections & fittings etc. painting with 2 coats of approved synthetic enamel paint over a shop coat of red oxide primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors excluding cost of priming coat etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.. (The make, quality and colour of paint should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Painting the new walls (Interior & Exterior) with two coats of approved cement paint in addition to one coat of approved primer over cement plastered wall surfaces etc. including cost of cement paint, brushes, etc., complete complying with standard specification and as directed by SIPCOT officers. (paints and its shade shall be got approved from the SIPCOT official before using)

Providing and fixing of circular FRC manhole cover with frame of size 600mm dia etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Supplying and laying of 160 mm dia PVC 6kg/cm2pipe for rain water collection from catch basin to Storm water drain conforming to IS13592 with ISI mark and fittings conforming to IS 14735, with necessary solvent cement of approved quality for jointing,laying etc., complete complying with the standard specificaiton and as directed by SIPCOT officers.

Providing brick masonry partition wall 115 mm thick using II class ground moulded chamber burnt bricks of size 9" x 4.5" x 3" in cm 1:4 (one cement and four M sand ) including supplying and providing 2 nos. of 6 mm dia hoop reinforcement at every 4th layer, curing, raking out of the joints etc., complete compiling with standard specification.

Plastering with cement mortar 1:5 (One cement and five M sand) 20 mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finishing, curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Providing rain water harvesting system as per the drawing including necessary earth work, 300 mm dia boring up to 4.0m depth, providing 160 mm dia pvc pipes up to 4.0m, filling materials as specified etc, complete complying with standard specifications and as directed by "SIPCOT" officers (Inner size of chamber 1.00m x1.00mx1.05m )

Labour charges for Painting SIPCOT Board Emblem in accordance with the size and specifications as approved by the SIPCOT on the Pump room,GLSR & ELSR including cost of all consumables, one coat of base paint, scaffolding charges including painting. (WD-W0745) etc., complete complying with standard specification and as directed by SIPCOT officers.

Supply of Early Streamer Emission Air Terminal (ESEAT). Model: S The ESEAT has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere. The Air terminal is non-radioactive and requires no special licensing. The unit is fully autonomous (no battery, no external power supply is required ), collects energy from the ambient electric field.The ESEAT model has been tested in a high voltage laboratory in accordance with NFC 17 102 in order to measure the average gain in triggering. The average gain in triggering time (”Ts) obtained during the lab test for the offered model is 60 μs. The ESEAT works on negative as well as positively polarized discharges. ESEAT has been tested for such discharges in Central Power Research Institute (CPRI). A dedicated tester is avilable to test the healthiness of the ESEAT on request (Page No. 37, Point No. 3 of Clause 8.6 of the Revised NFC 17-102 version 2011 ). ESEAT Model : S - Radius of protection : 46 Metres Level of protection considered for the Project-II leve etc., complete complying with standard specification and as directed by SIPCOT officers.

supply of avaiation light make : richlight

Supply, laying and Jointing of DI Pipes and Fittings etc. complete as per standard specifications and as directed by SIPCOT officers.

Inlet

DI double flanged Bend - 300mm

Outlet

DI double flanged Bend - 350mm

Overflow

DI double flanged Bend - 300mm

Butterfly valves

Manufacturing, supply and delivery of resilient seated wafer type butterfly valve in accordance with EN 593, centric disk mounted in three maintenance-free bearing bushes, tight in both flow directions, Replaceable rubber sleeve with integrated seal for functionally reliable use for flared flanges, welding flanges, PE flanges as well as loose flanges with V-collar, Stable seat due to collar with vulcanized support ring. Vaccum tight upto 1 Torr. Face to face length acc.to 558-1, basic series 20(DIN 3202/k1). With Electrostatic epoxy powder coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270.(EP-P it is resi-coat powder approved for drinking water application, applied through fusion bonding technology process by dipping the shot-blasted casted components heated upto 200 deg C) including all accessories etc., complete complying with standard specification and as directed by SIPCOT officers.

Inlet

300 mm dia. butterfly valves

Outlet

300 mm dia. butterfly valves

Drain

300 mm dia. butterfly valves

DI Pipe - Spigot Type

Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 and including all fittings, trenching and refilling & testing of joints complete as per direction of Engineer in Charge.

Inlet

300 mm dia Ductile Iron Class K-7 pipes ( From pump house to bottom of OHT)

DI Pipe - Flanged type

Inlet

300mm dia Ductile Iron K7 flanged pipe - 3 m standard length ( For Vertical arrangement pipe ELSR)

Outlet

350mm dia Ductile Iron K7 flanged pipe - 3 m standard length

Overflow and drain

350mm dia Ductile Iron K7 flanged pipe - 3 m standard length

Puddle flange

Inlet

DI welded double flanged pipe with puddle - 300mm dia - 2m standard length

Outlet

DI welded double flanged pipe with puddle - 350mm dia - 2m standard length

Overflow

DI welded double flanged pipe with puddle - 300mm dia - 2m standard length

Drain

DI welded double flanged pipe with puddle - 300mm dia - 2m standard length

Enlarger

Inlet

DI Double flanged enlarger - 350mm x 300mm

Bellmouth for inlet pipe inside the tank 300mm flanged end. etc., complete complying with standard specification and as directed by SIPCOT officers.

Supply, delivery and installation of water level measuring system up to 1 mm accuracy to measure up to 30 m depth in wells/OHTs/ sumps with suitable sensor, level transducer with transmitter, 2 or 4 wire loop, all wetted parts in SS304 or above and with Remote control and suitable LED display unit easily readable upto 10m distance, cabinet to house remote display unit, Low/High alarm with suitable speaker, suitable cables with data storage capacity for 1 year and data transfer facility and with all required accessories including 1 year free replacement warranty etc., complete complying with standard specification and as directed by SIPCOT officers.

Providing and fixing of AC cowl of 100mm dia with necessary arrangements etc., complete complying with standard specification and as directed by SIPCOT officers.

Potable Pump House

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and leveling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers

Refilling with excavated soil (other than sand) in layers of 150 mm thickness well watered ramming, consolidation etc. complete as per standard specifications and as directed by SIPCOT officers

Supplying and filling in foundation and basement with Stone dust/Quarry dust in layers of 150 mm thickness well watered ramming, consolidation etc. complete as per standard specifications and as directed by SIPCOT officers

Providing Plain Cement Concrete 1:3:6(One cement, three sand and six Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with standard specifications and as directed by "SIPCOT" officers. (in all heights and all depths)

Brick work in Cement Mortar 1:5 (One part Cement and five part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Brick work in Cement Mortar 1:6 (One part Cement and six part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Ground floor (0 to 4.5m )

First floor (4.5m to 7.32m)

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and as directed by SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

Foundation and basement

Above GL

Above 4.50 m height

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

Below GL

Foundation and basement

Above GL - Beam

Column

Foundation and Basement

Up to 3.30m

Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete as directed by SIPCOT SIPCOT Officer..(TWAD SOR 2022-23,Pg-91,T.no-20.0)

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the SIPOCT SIPCOT Officer. before use on work

Supplying and fixing mild steel grills for windows, ventilators veranda enclosure, ladder and gate as per the design approved including one coat of primer and labour for fixing in position etc, all complete complying with standard specifications and as directed by "SIPCOT" officers. (The design of grill should be got approved from the SIPCOT SIPCOT Officer. before use)

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer’s specifications etc, all complete complying with standard specifications and as directed by "SIPCOT" officers

Weathering course with broken brick jelly lime concrete using 40 to 20 mm gauge broken brick jelly in pure slaked lime (no sand) over roof slab to the proportion of brick jelly to lime (fat lime) being 32 : 12 1 /2 by volume well beaten with wooden beaters, for giving the required slope and thickness including laying and finishing, etc, all complete complying with standard specifications and as directed by "SIPCOT" officers

Finishing the top of roof slab with one course of hydraulically pressed tile of approved superior quality of size 23 cm x 23 cm, 20 mm thick laid over weathering course in cement mortar 1:3 (One of cement and three of M sand) 12 mm thick, mixed with water proofing compound at 2% by weight of cement used and pointed neatly with the same cement mortar mixed with water proofing compound including curing etc., complete in all respects complying with relevant standard specifications and as directed by the engineer in charge. (Note: Tiles to be got approved by the SIPCOT SIPCOT Officer. before use and only one particular size pressed tiles should be used for one type of building)

Plastering with cement mortar 1:5 (One of cement and five of M sand) 12 mm thick finished with neat cement including, providing band cornice, ceiling cornice scaffolding curing etc., complete complying with standard specification and as directed by SIPCOT officers.

Plastering with cement mortar 1:5 (One cement and five M sand) 20 mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finishing, curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting the new walls (Interior ) with two coats of approved cement paint in addition to one coat of approved primer over cement plastered wall surfaces etc. including cost of cement paint, brushes, etc., complete complying with standard specification and as directed by SIPCOT officers. (paints and its shade shall be got approved from the SIPCOT official before using)

Painting the new walls (Interior ) with two coats of approved cement paint in addition to one coat of approved primer over cement plastered wall surfaces etc. including cost of cement paint, brushes, etc., complete complying with standard specification and as directed by SIPCOT officers. (paints and its shade shall be got approved from the SIPCOT official before using)

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors excluding cost of priming coat etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.. (The make, quality and colour of paint should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by "SIPCOT" officers. (The steel rods must be Fe 500 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etcGear Operated Type (from 8 sqm. to 12 sqm. Area)

Supplying and fixing of 110 mm dia PVC pipe for rain water down fall pipe conforming to IS13592 with ISI mark and fittings conforming to IS 14735, with necessary C I gratings, shoes, bends, offsets, clamps, teak wood plugs, etc., of approved quality including fixing C.I. gratings at the junction of parapet and floor or roof slab, finishing etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Providing rain water harvesting system as per the drawing including necessary earth work, 300 mm dia boring up to 4.0m depth, providing 160 mm dia pvc pipes up to 4.0m, filling materials as specified etc, complete complying with standard specifications and as directed by "SIPCOT" officers (Inner size of chamber 1.00m x1.00mx1.05m )

Labour charges for Painting SIPCOT Board Emblem in accordance with the size and specifications as approved by the SIPCOT on the Pump room,GLSR & ELSR including cost of all consumables, one coat of base paint, scaffolding charges including painting. (WD-W0745)

Pipes and fittings

Suctionn Pipes

200mm dia Ductile Iron K7 flanged pipe - 1 m standard length

Common header - Delivery

300mm dia Ductile Iron K7 flanged pipe - 1 m standard length

Strainer

Strainer - 200mm dia

Butterfly valves

Manufacturing, supply and delivery of resilient seated wafer type butterfly valve in accordance with EN 593, centric disk mounted in three maintenance-free bearing bushes, tight in both flow directions, Replaceable rubber sleeve with integrated seal for functionally reliable use for flared flanges, welding flanges, PE flanges as well as loose flanges with V-collar, Stable seat due to collar with vulcanized support ring. Vaccum tight upto 1 Torr. Face to face length acc.to 558-1, basic series 20(DIN 3202/k1). With Electrostatic epoxy powder coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270.(EP-P it is resi-coat powder approved for drinking water application, applied through fusion bonding technology process by dipping the shot-blasted casted components heated upto 200 deg C) including all accessories complete as per direction of Engineer in Charge.

200 mm dia. butterfly valves

Dismantling joint

DI Dismantling joint - 200mm dia.

Equal Tee - Suction

DI All flanged Tee - 300mm x 300mm x 200mm

Equal Tee - Delivery

DI All flanged Tee - 300mm x 300mm x 300mm

Individual header - Suction

200mm dia Ductile Iron K7 flanged pipe - 1 m standard length

Individual header - Delivery

300mm dia Ductile Iron K7 flanged pipe - 1 m standard length

Individual header - Suction - Butterfly valve

Manufacturing, supply and delivery of resilient seated wafer type butterfly valve in accordance with EN 593, centric disk mounted in three maintenance-free bearing bushes, tight in both flow directions, Replaceable rubber sleeve with integrated seal for functionally reliable use for flared flanges, welding flanges, PE flanges as well as loose flanges with V-collar, Stable seat due to collar with vulcanized support ring. Vaccum tight upto 1 Torr. Face to face length acc.to 558-1, basic series 20(DIN 3202/k1). With Electrostatic epoxy powder coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270.(EP-P it is resi-coat powder approved for drinking water application, applied through fusion bonding technology process by dipping the shot-blasted casted components heated upto 200 deg C) including all accessories complete as per direction of Engineer in Charge.

200 mm dia. butterfly valves

Individual header - Delivery - Butterfly valve

Manufacturing, supply and delivery of resilient seated wafer type butterfly valve in accordance with EN 593, centric disk mounted in three maintenance-free bearing bushes, tight in both flow directions, Replaceable rubber sleeve with integrated seal for functionally reliable use for flared flanges, welding flanges, PE flanges as well as loose flanges with V-collar, Stable seat due to collar with vulcanized support ring. Vaccum tight upto 1 Torr. Face to face length acc.to 558-1, basic series 20(DIN 3202/k1). With Electrostatic epoxy powder coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270.(EP-P it is resi-coat powder approved for drinking water application, applied through fusion bonding technology process by dipping the shot-blasted casted components heated upto 200 deg C) including all accessories complete as per direction of Engineer in Charge.

300 mm dia. butterfly valves

Individual header - Suction - Dismantling joint

200mm dia. DI Dismantling joint

Individual header - Delivery - Dismantling joint

300mm dia. DI Dismantling joint

Individual header - Suction - Double flanged reducer

DI Double flanged reducer - 200mm x 150mm

Individual header - Delivery - Double flanged reducer

DI Double flanged reducer - 300mm x 250mm

Electromagnetic Flow Meter

Water Supply Network - Potable

Supply, Laying, Jointing, Testing and Commisioning of OPVC pipes for potable water supply as per IS 16647/ 2017, etc. complete complying with standard specifications and as directed by SIPCOT Officers UN PLASTICIZED O-PVC PIPES FOR POTABLE WATER SUPPLY AS PER IS 16647 / 2017

110 mm OD, PN 12.5 Class 500

160 mm OD, PN 12.5 Class 500

250 mm OD, PN 12.5 Class 500

315 mm OD, PN 12.5 Class 500

DI Pipe

Supplying and delivering of Ductile Iron Socket/Spigot pipes for class K7 pipe as IS 8329/2000 and amended from time to time for the following sizes of pipes etc., complete complying with standard specifications and as directed by SIPCOT Officers.

350mm dia Ductile Iron Class K-7 pipes

Gate Valve

Supply and delivery of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves(Sluice Valves) with body Bonnet of Ductile cast iron of Grade GGG 40 or equivalent grade, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163-89/ISI 4846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16 with 5 years warranty including all accessories complete as directed by SIPCOT Officers

100 mm dia. Gate valves for 110 mm OPVC pipes

300 mm dia. Gate valves for 315 mm OPVC pipes

Scour valve

Supply and delivery of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves(Sluice Valves) with body Bonnet of Ductile cast iron of Grade GGG 40 or equivalent grade, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163-89/ISI 4846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16 including all accessories complete as directed by SIPCOT Officers

50 mm gate valve for scouring purpose - up to 100 mm dia OPVC pipe

80 mm gate valve for scouring purpose - up to 150 mm dia OPVC pipe

150 mm gate valve for scouring purpose - up to 315 mm dia OPVC pipe

Air valve

Manufacture, Supply and Delivery of Tamper proof DI single chamber air release valves with pressure range from PN 10/16 with body and cover made of Ductile Iron of Grade GGG 40 or equivalent grade conforming to IS 1865 with Food Grade Epoxy Powder coating(EP-P) inside and for outside of colour blue RAL 5005. All internal parts such as float, shell etc., cover bolts, made of Austenitic alloy steel of SS AISI 304/316. The float shall be made of Polytetrafluroethylene/Austenitic alloy steel of AISI 304/316. Gaskets and seals of EPDM / Neoprene rubber for TWADBoard works anywhere in Tamil Nadu and including all accessories complete as per directed by SIPCOT Officers

80mm air valve for pipe size up to 350 mm dia.

NP-3 class R.C.C. pipes for road crossing

Supplying and laying non pressure NP-3 class R.C.C. pipes using Ordinary Portland cement confirming to IS 458-2003 including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete in all respects as per directed by SIPCOT Officers. (using Ordinary Portland cement)

For potable water network

200mm dia R.C.C. pipe

300mm dia R.C.C. pipe

400mm dia R.C.C. pipe

Electromagnetic flow meter

Electromagnetic Flow Meter shall be a velocity sensing Electromagnetic type, microprocessor based signal converter, sealed housing, flanged tube meter for 1.0 Mpa working pressure, manufactured to highest standard available for mag-meters, equipped with minimum six digit digital totalizers, reading in different units (Kiloliters / Cubic meter) and shall be accurate within 0.5% of Measured value, shall operate within a range of 0.3 m/sec to 4 m/sec and be constructed as follows: Meter tube (Sensor) shall be fabricated from stainless steel tube and use class PN10 flat face carbon steel flanges in accordance with IS 1538. These flanges shall be welded to the flow tube. The internal and external of the meter tube shall be blasted to near white and lined with hard rubber/ Polyurethrene/ PTFE preferably by SBR or EPDM. Meter tube shall have a constant nominal inside diameter offering no obstruction to the flow. The accuracy should be inclusive of linearity, hysteresis, repeatability, temperature and pressure effects. Coil Housing shall be fabricated from stainless steel (SS304)/ Die cast Aluminium/ Carbon steel with anticorrosive paint for corrosion resistance and welded to the tube providing a completely sealed environment for all coils, electrode connections and wiring harness capable of submerged or buried operation with IP68 Protection. Signal Converter shall be pulsed DC coil excitation type with auto zeroing. The signal converter shall be remotely mounted away from the meter. The converter shall indicate direction of flow and provide a flow rate indication and a total of flow volume for both forward and reverse directions. The converter shall provide an isolated 4-20 mA output into minimum 500-ohm load and a frequency output of a maximum of 0-10 KHZ and a scaled pulse output. The microprocessor based signal converter shall have a self-diagnostic test mode and a backlit display that continuously displays “Rate of Flow” and “Total Volume”. Converter shall be supplied with a programmable low flow drop out, higher flow and empty pipe zero return. The signal converter housing should be die-cast aluminium with glass window. The converter cum transmitter should be fully programmable from the front facia. The programming should be user friendly, self-prompting menu driven. Flow meter test calibration certificate from FCRI, flow test lab / NABL accredited lab to be furnished.

DN300 Electromagnetic flow meter

Thrust block

Construction of thrust block for the following sizes as mentioned below with R.C.C. M25 grade concrete with necessary excavation including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m including centering and shuttering, strutting, propping etc. as per the direction of Engineer in Charge.

Thrust block Size of 1.5 m x 0.5 m x 1.2 m for 250 mm dia pipe

Valve chamber

Construction of rectangle valve chamber with R.C.C in M25 grade concrete, with necessary excavation, foundation levelling concrete in 1:3:6 (1 cement: 3 fine sand : 6 graded stone aggregate 40 mm nominal size), inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement including reinforcement steel and shuttering complete as per standard design as per the direction of Engineer in Charge.

For Gate valve

Gate valve chamber - For up to 150 mm dia pipe - (1.2m x 1.0m x 1.8m)

Gate valve chamber - For up to 300 mm dia pipe - (1.2m x 1.2m x 1.95m)

For Scour valve

Scour valve chamber - 50mm Scour valve for up to 100 mm dia pipe line - (0.80m x 1.2m x 1.85m)

Scour valve chamber - 80mm Scour valve for up to 150 mm dia pipe line - (0.80m x 1.2m x 1.85m)

For Air valve

Air valve chamber - 50 AV for upto 200 mm dia pipe - (1.0m x 1.0m x 1.8m)

Water Supply Network - Non Potable TTRO

OPVC pipe

Supply, Laying, Jointing, Testing and Commisioning of OPVC pipes for potable water supply as per IS 16647/ 2017, etc. Complete. UN PLASTICIZED O-PVC PIPES FOR POTABLE WATER SUPPLY AS PER IS 16647 / 2017

315 mm OD, PN 12.5 Class 500

400 mm OD, PN 12.5 Class 500

Gate Valve

Manufacturing, supply and delivery of resilient seated wafer type butterfly valve in accordance with EN 593, centric disk mounted in three maintenance-free bearing bushes, tight in both flow directions, Replaceable rubber sleeve with integrated seal for functionally reliable use for flared flanges, welding flanges, PE flanges as well as loose flanges with V-collar, Stable seat due to collar with vulcanized support ring. Vacuum tight up to 1 Torr. Face to face length acc.to 558-1, basic series 20(DIN 3202/k1). With Electrostatic epoxy powder coating (EP-P) inside and outside colour blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270.(EP-P it is resi-coat powder approved for drinking water application, applied through fusion bonding technology process by dipping the shot-blasted casted components heated up to 200 deg C) including all accessories complete and as directed by SIPCOT Officers

400 mm dia. Gate valves

For Road Crossings

500 mm dia R.C.C. pipe

Electromagnetic flow meter

Electromagnetic Flow Meter shall be a velocity sensing Electromagnetic type, microprocessor based signal converter, sealed housing, flanged tube meter for 1.0 Mpa working pressure, manufactured to highest standard available for mag-meters, equipped with minimum six digit digital totalizers, reading in different units (Kiloliters / Cubic meter) and shall be accurate within 0.5% of Measured value, shall operate within a range of 0.3 m/sec to 4 m/sec and be constructed as follows: Meter tube (Sensor) shall be fabricated from stainless steel tube and use class PN10 flat face carbon steel flanges in accordance with IS 1538. These flanges shall be welded to the flow tube. The internal and external of the meter tube shall be blasted to near white and lined with hard rubber/ Polyurethrene/ PTFE preferably by SBR or EPDM. Meter tube shall have a constant nominal inside diameter offering no obstruction to the flow. The accuracy should be inclusive of linearity, hysteresis, repeatability, temperature and pressure effects. Coil Housing shall be fabricated from stainless steel (SS304)/ Die cast Aluminium/ Carbon steel with anticorrosive paint for corrosion resistance and welded to the tube providing a completely sealed environment for all coils, electrode connections and wiring harness capable of submerged or buried operation with IP68 Protection. Signal Converter shall be pulsed DC coil excitation type with auto zeroing. The signal converter shall be remotely mounted away from the meter. The converter shall indicate direction of flow and provide a flow rate indication and a total of flow volume for both forward and reverse directions. The converter shall provide an isolated 4-20 mA output into minimum 500-ohm load and a frequency output of a maximum of 0-10 KHZ and a scaled pulse output. The microprocessor based signal converter shall have a self-diagnostic test mode and a backlit display that continuously displays “Rate of Flow” and “Total Volume”. Converter shall be supplied with a programmable low flow drop out, higher flow and empty pipe zero return. The signal converter housing should be die-cast aluminium with glass window. The converter cum transmitter should be fully programmable from the front facia. The programming should be user friendly, self-prompting menu driven. Flow meter test calibration certificate from FCRI, flow test lab / NABL accredited lab to be furnished.

DN400 Electromagnetic flow meter

Thrust block

Construction of thrust block for the following sizes as mentioned below with R.C.C. M25 grade concrete with necessary excavation including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m including centering and shuttering, strutting, propping etc. as per the direction of Engineer in Charge.

Thrust block Size of 1.5 m x 0.5 m x 1.2 m for 250 mm dia pipe

Valve chamber

Construction of rectangle valve chamber with R.C.C in M25 grade concrete, with necessary excavation, foundation levelling concrete in 1:3:6 (1 cement: 3 fine sand : 6 graded stone aggregate 40 mm nominal size), inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement including reinforcement steel and shuttering complete as per standard design as per the direction of Engineer in Charge.

For Gate valve

Gate valve chamber - For up to 400 mm dia pipe - (1.2m x 1.2m x 1.95m)

Water Supply Network - Non Potable STP

MDPE pipe

MDPE PE 80 PN12.5 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK, suitable for 20mm, 25mm and 32mm OD MDPE pipes Supply, Laying, Jointing, Testing and Commisioning of MDPE PE 80 PN12.5 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD for non-potable water supply as per IS 16647/ 2017, etc. complete complying with standard specifications and as directed by SIPCOT Officers

OD 50 mm, PN 12.5

OD 32 mm, PN 12.5

Sprinklers

"Supply, Fixing & commissioning of 5004 PLUS SAM PRS Series Rotor pop up sprinkler full/part circle having radius of 6.7m - 12m @ 2.5 - 4.5 bar with discharge of 0.09 - 0.61 ltr./sec. the sprinklers having Arc Adjust thru Top Cover w/ Std. Screwdriver The sprinkler is gear driven rotary type with having 3/4"" bottom inlet. Oversized wiper seal, Rain Curtain technology, gentle close-in watering and Self-flushing arc adjustment port and also having tapered riser stem with Wiper Seal The sprinkler shall have Plus (PL) Flow shut off, 45 psi pressure regulator with flow optimizer technology, internal Seal - A - Matic device which prevents low head drainage (upto 3.1m) & hence puddling & erosion. The body of sprinkler is of non - corrodible, heavy duty, ABS plastic. O-ring Slip Clutch, Racheting Slip Clutch, Side Inlet Available 6"" and 12"",Turret- mounted ID Plugs, Flow Stop Available, Non-potable water indication available etc., complete including installation charges."

NP-3 class R.C.C. pipes for road crossing

Supplying and laying non pressure NP-3 class R.C.C. pipes using Ordinary Portland cement confirming to IS 458-2003 including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete in all respects as per directed by SIPCOT Officers. (using Ordinary Portland cement)

For potable water network

200mm dia R.C.C. pipe

Electromagnetic Flow Meters

10/ 15mm EMF meter

50mm EMF meter

Pump Cost Water Utility 1

Horizontal Split Casting Centrifugal Pump (1500 RPM)

Supply and delivery of Horizontal split casing centrifugal pump conforming to IS 1520 and as amended thereafter with CI casing and split glands, stainless steel shaft, hydraulically and dynamically balanced bronze impellers capable of discharging required quantity of water against a total head noted below due to all causes and with the accessories such as G.M air release cock, Grease cup, G.I priming funnel, M.S lifting hook, drip water G.I pipe connections, leading to the outside of pump house rubber water deflector, double flap foot valve, G.M strainer including unique tyre type coupling, common M.S fabricated base to mount pump and motor and other standard fittings etc complete. Pump shall be capable of discharging the specified quantity at the head noted at the minimum NPSH at site conditions. The shut off head shall be atleast 25% over and above the head at duty point. The pump shall be suitable for operation in AC three phase, 415 V, 50 Hz, 1500 RPM. Required Pumpset Configuration. Two Working and One Standby Pumpset Power: 15 HP Pumpset Discharge Rate: 1500 LPM Pumpset Requried Head: 29m

Horizontal Squirrel Cage Motor (1500 RPM)

AC three Phase /415 V/ Horizontal SPDP 4 Pole Squirrel cage Induction motor for HSC Centrifugal pumps Supply and delivery of AC three Phase 4 pole Horizontal squirrel cage Induction motor confiriming to IS 325/1996 and as amended thereafter with Class F insulation to suit the speed of pump and suitable for operation with continous S1 rated, 415 V +/- 10 %, 50 HZ +/- 5%, TEFC (upto 20 HP), SPDP (above 20 HP). The motor offered should be of energy efficient motors.

Labour Charges for erection of Horizontal shaft, centrifugal pump set etc, complete

15 HP pumpset

Supply, Delivery of following size if 1.1 KV grade armored aluminum conductor Cross Linked Poly Ethylene (XLPE) insulated PVC sheathed cables conforming to IS 7098 (part 1)/ 1988 with ISI marking etc, complete complying with standard specifications and as directed by SIPCOT officers.

95. Sq.mm (1. From EB pole to meter board at pumproom 2. SFU to MV panel at pumproom)

50 Sq. Mm (1. From MV panel to each motor connections at pumproom)

35 Sq. Mm (1. For Capacitor connections and lighting at pumproom)

Labour Charges for laying the following sizes of cables form EB supply to MV panel board through LT metering as per IE rules etc, complete complying with standard specifications and as directed by SIPCOT officers

Cable laying up to 95 Sq.mm (3.5 core X 95 Sq.mm)

Cable laying up to 95 Sq.mm (3.5 core X 50 Sq.mm)

Cable laying up to 95 Sq.mm (3.5 core X 35 Sq.mm)

Cable laying up to 95 Sq.mm (3.0 core X 35 Sq.mm)

RATE FOR CABLE JOINTS INCLUDING JOINTING MATERIALS AND LABOUR JOINTING OF L.T. CABLES- 3,3.5,4 CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CABLE CONFORMING TO IS 1554 PART I AND AS AMENDED THERE AFTER WITH ISI MARKING

95 sq.mm X 3.5 Core

50 sq.mm X 3.5 Core

35 sq.mm X 3 Core

Power Capacitor (3. No, 5 KVAR each) Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415 / 440V 50 HZ conforming to ISS with ISI marking Supply, delivery, and fixing in position of following medium voltage power capacitor electric as per IS 2384 suitable for 415 V - 3 phase, 50 HZ, AC supply duly banked with copper bus bar of ample current carrying terminals etc, complete complying with standard specifications and as directed by SIPCOT officers

TWIN CI EARTHING as per IS 3043/1987 and Latest amendments Supply and fixing if Twin CI earthing suitable for 15 HP open well submersible pumpsets (as per IS 3034/1987 and latest amendment) etc., complete complying with standard specifications and as directed by SIPCOT officers

Supply and delivery of following safety appliances including all taxes, duties and handling charges etc., complete complying with standard specifications and as directed by SIPCOT SIPCOT Officer.

a.2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS

b. Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms

c. 4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle

d. Shock Treatment Chart fixed in glass frame

e. First Aid Box complete with all First Aid Medicines

f. AC Chargeable Emergency Lamp 2 x 11W PL Lamp with all connected accessories

g. Metallic Danger Board as required by the Electrical Authorities

Pump Cost Water Utility 2

Horizontal Split Casting Centrifugal Pump (1500 RPM)

Supply and delivery of Horizontal split casing centrifugal pump conforming to IS 1520 and as amended thereafter with CI casing and split glands, stainless steel shaft, hydraulically and dynamically balanced bronze impellers capable of discharging required quantity of water against a total head noted below due to all causes and with the accessories such as G.M air release cock, Grease cup, G.I priming funnel, M.S lifting hook, drip water G.I pipe connections, leading to the outside of pump house rubber water deflector, double flap foot valve, G.M strainer including unique tyre type coupling, common M.S fabricated base to mount pump and motor and other standard fittings etc complete. Pump shall be capable of discharging the specified quantity at the head noted at the minimum NPSH at site conditions. The shut off head shall be atleast 25% over and above the head at duty point. The pump shall be suitable for operation in AC three phase, 415 V, 50 Hz, 1500 RPM. Required Pumpset Configuration. Two Working and One Standby Pumpset Power: 45 HP Pumpset Discharge Rate: 3500 LPM Pumpset Requried Head: 29m

Horizontal Squirrel Cage Motor (1500 RPM)

AC three Phase /415 V/ Horizontal SPDP 4 Pole Squirrel cage Induction motor for HSC Centrifugal pumps Supply and delivery of AC three Phase 4 pole Horizontal squirrel cage Induction motor confiriming to IS 325/1996 and as amended thereafter with Class F insulation to suit the speed of pump and suitable for operation with continous S1 rated, 415 V +/- 10 %, 50 HZ +/- 5%, TEFC (upto 20 HP), SPDP (above 20 HP). The motor offered should be of energy efficient motors.

FULLY AUTOMATIC AIR BREAK AUTO TRANSFORMER STARTER WITH SINGLE PHASING PREVENTOR WITH AMMETER CONFIRMING TO IS 8544 Part IV WITH AUTO RESTART FACILITY Supply and delivery of Fully Automatic Auto Transformer Starter suitable for the motor offered. Floor mounting type air/ oil cooled Auto Transformer Starter with tapings at 50%, 65%, 80%, housed in robust steel chamber with arc and main contacts confirming to IS 8544 Part IV and as amended therafter for operation in AC three Phase 50 Hz (+/- 5%), 415V (+/- 10%) with the following components, under voltage release with no volt coil, over load relay with dash pot arrangements, single phasing preventor, LED ON/ OFF switches, Mounted Ammeter, Earth leakage relay, contactor assembly suitable for next standard KW rating, in coming and out going cable entry provisions, transformer tank including first filling of oil etc.

Labour Charges for erection of Horizontal shaft, centrifugal pump set etc, Complete

Supply, Delivery of following size if 1.1 KV grade armored aluminum conductor Cross Linked Poly Ethylene (XLPE) insulated PVC sheathed cables conforming to IS 7098 (part 1)/ 1988 with ISI marking etc, complete complying with standard specifications and as directed by SIPCOT officers.

150. Sq.mm (1. From EB pole to meter board at pumproom 2. SFU to MV panel at pumproom)

95 Sq. mm (1. From MV panel to each motor connections at pumproom)

50 Sq. mm (1. For Capacitor connections and lighting at pumproom)

Labour Charges for laying the following sizes of cables form EB supply to MV panel board through LT metering as per IE rules etc, complete complying with standard specifications and as directed by SIPCOT officers

Cable laying from 95 Sq.mm to 240 Sq.mm (3.5 core X 150 Sq.mm)

Cable laying up to 95 Sq.mm (3.5 core X 95 Sq.mm)

Cable laying up to 95 Sq.mm (3.5 core X 50 Sq.mm)

Cable laying up to 95 Sq.mm (3 core X 50 Sq.mm)

RATE FOR CABLE JOINTS INCLUDING JOINTING MATERIALS AND LABOUR JOINTING OF L.T. CABLES- 3,3.5,4 CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CABLE CONFORMING TO IS 1554 PART I AND AS AMENDED THERE AFTER WITH ISI MARKING

Power Capacitor (3. No. of 15 KVAR each) Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415 / 440V 50 HZ conforming to ISS with ISI marking Supply, delivery, and fixing in position of following medium voltage power capacitor electric as per IS 2384 suitable for 415 V - 3 phase, 50 HZ, AC supply duly banked with copper bus bar of ample current carrying terminals etc, complete complying with standard specifications and as directed by SIPCOT officers

TWIN CI EARTHING as per IS 3043/1987 and Latest amendments Supply and fixing if Twin CI earthing suitable upto 25 HP open well submersible pumpsets (as per IS 3034/1987 and latest amendment) etc., complete complying with standard specifications and as directed by SIPCOT officers

Supply and delivery of following safety appliances including all taxes, duties and handling charges etc., complete complying with standard specifications and as directed by SIPCOT SIPCOT Officer.

a.2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS

b. Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms

c. 4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle

d. Shock Treatment Chart fixed in glass frame

e. First Aid Box complete with all First Aid Medicines

f. AC Chargeable Emergency Lamp 2 x 11W PL Lamp with all connected accessories

g. Metallic Danger Board as required by the Electrical Authorities

Site Development Works Water Utility Location 1 - CIVIL

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers. (including refilling) 0 to 2 m depth

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers (excluding refilling)

Providing Plain Cement Concrete 1:4:8(One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with standard specifications and as directed by "SIPCOT" officers. (in all heights and all depths)

Plain cement concrete pavement with CC1:1.5:3 (one of cement : one and half of Msand: six of hard broken stone jelly 20 mm nominal size) including laying, curing, finishing etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying and Fixing in position of barbed wire fencing using 10 gauge 2 ply 4 pronged barbed wire (Galvanised) etc complete in all respects and as directed by SIPCOT SIPCOT Officer.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as directed by the SIPCOT SIPCOT Officer.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors excluding cost of priming coat etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.. (The make, quality and colour of paint should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 350 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and as directed by SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

a) Foundation and basement

b) in Ground floor

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

a) For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete

c) For RCC surface of columns, vertical wall and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.

Plastering with cement mortar 1:5 (One of cement and five of M sand) 12 mm thick finished with neat cement including, providing band cornice, ceiling cornice scaffolding curing etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting two coats of newly plastered External wall surface with ready mixed Weather proof Exterior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by "SIPCOT" officers. (The steel rods must be Fe 500 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M-40 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc., complete complying with the standard specificaiton and as directed by SIPCOT officers.

Construction of Granular Sub - Base (GSB) to the required compacted thickness (Drainage layer) by providing approved Coarse graded material conforming to Grading-V of Table 400 - 1 and satisfying the physical requirement for material for GSB as per Table 400 - 2 of MORTH Rev -5 including screening, spreading in uniform layers with motor grader on prepared surface, watering and premixing by mix in place method with rotavator at OMC, and compacting with Vibratory roller 80 to 100 KN static weight to achieve the desired density and fine dressing to required grade and cross slope as directed by the SIPCOT officers etc., complete including obtaining and transporting all materials from approved quarry site to work site with all lift and lead by mechanical transport, head load or any other mode of transporation including cost and conveyance of all materials, labour charges,hire charges and fuel charges for loader, water tanker with sprinkler,motor grader, vibratory road rollers and all other equipments, tools and plants, safety measures, testing required including all other incidental charges, etc., complete as per the standard specification as per clause 401 of MORTH Rev.-5 and as directed by the SIPCOT officers.

Providing, laying, spreading and compacting graded stone aggregates for Wet Mix Macadam 250mm thick, including premixing the materials with water at OMC in mechnanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5

Site Development Works Water Utility Location 1 - Street Light

Supplying and erection of 8m Free Standing Single Arm Bracket 8 sided Octagonally continuously tapered structured pole galvanized iron coated (GI) with minimum coating of not less than 65-75 micron, with 130mm bottom A/F & 70mm at top A/F made up of 3mm thick HT sheet along with base plate of size 250x250x12mm thick including 4 Nos of M24X750mm high "J" type EN8 grade foundation bolts along with template and 1.5mtr long hot dip galvanized Single / double arm bracket made up of 40NB dia GI pipe suitable to mount on pole having top of 70mm A/F and including Bakelite sheet with 1 No 6A SP MCB and stud type connector suitable for 4CX25Sqmm cable etc., complete complying with standard specifications and as directed by SIPCOT officers.

supply and fixing of 4 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, connector on suitable hylem sheet and supply and fixing of 60W LED street light fitting with LED and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour etc., complete complying with standard specifications and as directed by SIPCOT officers.

Supplying, installation, testing and commissioning of street lighting fixtures suitable for 80W LED street light fitting with cool day light, made out of pressure die cast aluminium body, separate compartment for LED, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams as required including accessories all inclusive etc., complete complying with standard specifications and as directed by SIPCOT officers.

Supply and laying of the following size of PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the three sides of the cable and refilling the earth to make good etc., complete and as directed by SIPCOT SIPCOT Officer..

3.5core x 25 sq.mm. Ar. Alu. UG cable ( For street light pole )

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc., complete and as directed by SIPCOT SIPCOT Officer..

3.5core x 25 sq.mm. Ar. Alu. UG cable ( For Street light )

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc., complete and as directed by SIPCOT SIPCOT Officer..

3.5core x 25 sq.mm. Ar. Alu. UG cable ( For Street light )

Supply & fixing of Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth etc., complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing & Commisssioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc., complete and as directed by SIPCOT SIPCOT Officer..

Supply and run of 25mm x 6mm Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc., complete and as directed by SIPCOT SIPCOT Officer..

Supply and installation of PVC Rigid Pipe 50mm (2") including laying charges in street light pole foundation for power cable entry. Complete, as per standard specification etc., complete and as directed by SIPCOT SIPCOT Officer..

Supply ,Excavation and laying of HDPE Pipe 120mm / 103.50mm for electrical cable laying road crossing etc., complete and as directed by SIPCOT SIPCOT Officer..

Supply & installation of Cable route markers made of galvanised CI circular 100 mm. dia. with "LT/HT CABLE" markers on same by 30 mm. size letter. The cable marked shall be firmly installed with 450 mm anchoring below ground level etc., complete and as directed by SIPCOT SIPCOT Officer..

Streetlight pole foundation

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers. (including refilling) 0 to 2 m depth

Providing Plain Cement Concrete 1:4:8(One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with standard specifications and as directed by "SIPCOT" officers. (in all heights and all depths)

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

For RCC surface of columns and in small quantities such

Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and as directed by SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by "SIPCOT" officers. (The steel rods must be Fe 500 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

Site Development Works Water Utility Location 2- CIVIL

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers. (including refilling) 0 to 2 m depth

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers (excluding refilling)

Providing Plain Cement Concrete 1:4:8(One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with standard specifications and as directed by "SIPCOT" officers. (in all heights and all depths)

Plain cement concrete pavement with CC1:1.5:3 (one of cement : one and half of Msand: six of hard broken stone jelly 20 mm nominal size) including laying, curing, finishing etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying and Fixing in position of barbed wire fencing using 10 gauge 2 ply 4 pronged barbed wire (Galvanised) etc complete in all respects and as directed by SIPCOT SIPCOT Officer.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as directed by the SIPCOT SIPCOT Officer.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors excluding cost of priming coat etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.. (The make, quality and colour of paint should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 350 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and as directed by SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

a) Foundation and basement

b) in Ground floor

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

a) For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete

c) For RCC surface of columns, vertical wall and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.

Plastering with cement mortar 1:5 (One of cement and five of M sand) 12 mm thick finished with neat cement including, providing band cornice, ceiling cornice scaffolding curing etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting two coats of newly plastered External wall surface with ready mixed Weather proof Exterior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by "SIPCOT" officers. (The steel rods must be Fe 500 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M-40 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc., complete complying with the standard specificaiton and as directed by SIPCOT officers.

Construction of Granular Sub - Base (GSB) to the required compacted thickness (Drainage layer) by providing approved Coarse graded material conforming to Grading-V of Table 400 - 1 and satisfying the physical requirement for material for GSB as per Table 400 - 2 of MORTH Rev -5 including screening, spreading in uniform layers with motor grader on prepared surface, watering and premixing by mix in place method with rotavator at OMC, and compacting with Vibratory roller 80 to 100 KN static weight to achieve the desired density and fine dressing to required grade and cross slope as directed by the SIPCOT officers etc., complete including obtaining and transporting all materials from approved quarry site to work site with all lift and lead by mechanical transport, head load or any other mode of transporation including cost and conveyance of all materials, labour charges,hire charges and fuel charges for loader, water tanker with sprinkler,motor grader, vibratory road rollers and all other equipments, tools and plants, safety measures, testing required including all other incidental charges, etc., complete as per the standard specification as per clause 401 of MORTH Rev.-5 and as directed by the SIPCOT officers.

Providing, laying, spreading and compacting graded stone aggregates for Wet Mix Macadam 250mm thick, including premixing the materials with water at OMC in mechnanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5

Site Development Works Water Utility Location 2- Street Light

Supplying and erection of 8m Free Standing Single Arm Bracket 8 sided Octagonally continuously tapered structured pole galvanized iron coated (GI) with minimum coating of not less than 65-75 micron, with 130mm bottom A/F & 70mm at top A/F made up of 3mm thick HT sheet along with base plate of size 250x250x12mm thick including 4 Nos of M24X750mm high "J" type EN8 grade foundation bolts along with template and 1.5mtr long hot dip galvanized Single / double arm bracket made up of 40NB dia GI pipe suitable to mount on pole having top of 70mm A/F and including Bakelite sheet with 1 No 6A SP MCB and stud type connector suitable for 4CX25Sqmm cable etc., complete complying with standard specifications and as directed by SIPCOT officers.

Supplying, installation, testing and commissioning of street lighting fixtures suitable for 80W LED street light fitting with cool day light, made out of pressure die cast aluminium body, separate compartment for LED, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams as required including accessories all inclusive etc., complete complying with standard specifications and as directed by SIPCOT officers.

Supply and laying of the following size of PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the three sides of the cable and refilling the earth to make good etc., complete and as directed by SIPCOT SIPCOT Officer..

3.5core x 25 sq.mm. Ar. Alu. UG cable ( For street light pole )

Supply and fixing of brass cable gland for following PVC LTUG aluminium armoured cable with earth connection etc.for following sizes of cables etc., complete and as directed by SIPCOT SIPCOT Officer..

3.5core x 25 sq.mm. Ar. Alu. UG cable ( For Street light )

Supply and providing cable end termination of following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc., complete and as directed by SIPCOT SIPCOT Officer..

3.5core x 25 sq.mm. Ar. Alu. UG cable ( For Street light )

Supply & fixing of Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth etc., complete and as directed by SIPCOT SIPCOT Officer..

Supply, installation, testing & Commisssioning of Earthing as per PWD standard with an electrode of 2.10 metre class 'B' GI pipe of die not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funnelling arrangements and masonry works and 38mm RCC Cover slab for brick masonry etc., complete and as directed by SIPCOT SIPCOT Officer..

Supply and run of 25mm x 6mm Flat Down Conductor with necessary clamps / supports on wall / floor / ground for earth connection etc., complete and as directed by SIPCOT SIPCOT Officer..

Supply and installation of PVC Rigid Pipe 50mm (2") including laying charges in street light pole foundation for power cable entry. Complete, as per standard specification etc., complete and as directed by SIPCOT SIPCOT Officer..

Supply ,Excavation and laying of HDPE Pipe 120mm / 103.50mm for electrical cable laying road crossing etc., complete and as directed by SIPCOT SIPCOT Officer..

Supply & installation of Cable route markers made of galvanised CI circular 100 mm. dia. with "LT/HT CABLE" markers on same by 30 mm. size letter. The cable marked shall be firmly installed with 450 mm anchoring below ground level etc., complete and as directed by SIPCOT SIPCOT Officer..

Streetlight pole foundation cost 8m

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers. (including refilling) 0 to 2 m depth

Providing Plain Cement Concrete 1:4:8(One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with standard specifications and as directed by "SIPCOT" officers. (in all heights and all depths)

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

For RCC surface of columns and in small quantities such

Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and as directed by SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by "SIPCOT" officers. (The steel rods must be Fe 500 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

D) Providing Sewerage System including STP and Sewer network in SIPCOT Mega Leather Park, Panapakkam in Ranipet District. (Package -6).

PROVIDING SEWER NETWORK

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers. (including refilling)

0 to 2 m depth

2 to 3m depth

3 to 4m depth

Construction of Machineholes using sulphate resistant cement at various depths to invert including earthwork excavation as per SS20B, laying cement concrete in C.M.1:3:6 using Crushed stone sand (Msand) and 40mm jelly for foundation, sinking well kerb below G.L. for 4.5m depth and above, pumping, timbering charges for 2.5m depth and above, stock brick work in C.M.1:3, for 23cm thick wall and over 23cm thick wall, plastering interior with C.M.1:3, 20mm thick and exterior with C.M.1:3, 12mm thick, laying plain cement concrete 1:3:6using 12.0mm to 20mm jelly fixing the frame, providing C.I. steps, machinehole cover using M20 grade concrete 125mm thick and SFRC circular cover and frame heavy duty, benching and channelling including refilling the trench with excavated earth and disposal of surplus earth etc. complete for the following sizes for each machine hole (As per the type design drawing for machinehole)

Up to 1m depth Invert level

1 to 1.5m depth Invert level

1.5m to 2m depth Invert level

Manufacturing, supply, installation of precast RCC Manhole using M20 Grade concrete, TMT Steel of Fe 500. The cost is inclusive of all materials for casting, Molding, Demoulding, Vibrating, Curing, earthwork excavation, PCC 1:3:6 150mm thick, refilling using available earth, transporting and Laying etc.(Manhole invert level 2.00m to 3.00m depth)

Manufacturing, supply, installation of precast RCC Manhole using M20 Grade concrete, TMT Steel of Fe 500. The cost is inclusive of all materials for casting, Molding, Demoulding, Vibrating, Curing, earthwork excavation, PCC 1:3:6 150mm thick, refilling using available earth, transporting and Laying etc.(Manhole invert level 3.00m to 4.00m depth)

Supply , Delivery, laying & Jointing of DWC Structured Wall Polyethylene Piping Systems (Pipe with online/offline coupler and elastomeric sealing ring) with required specials non-smooth external annular corrugated and smooth internal surface (Double wall) (SN 8 Class) for non-pressure underground sewerage, drainage application generally as per IS-16098 (Part-2) type B. - 200mm dia pipe

200 mm dia

Supply , Delivery, laying & Jointing of DWC Structured Wall Polyethylene Piping Systems (Pipe with online/offline coupler and elastomeric sealing ring) with required specials non-smooth external annular corrugated and smooth internal surface (Double wall) (SN 8 Class) for non-pressure underground sewerage, drainage application generally as per IS-16098 (Part-2) type B. - 150mm dia pipe

Supplying and fixing MS pipe 6m long, 150mm dia for Ventillating Columns with CI Base etc complete as per drawing.

Supplying, laying, jointing, testing and commisoning of CI supun pipes, lowering of C.I Pipes and specials in the trenches and laying to proper grade and alignment including, Jointing the C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing etc. complete in all respects and as directed by the engineer in charge.

200 mm dia

150mm dia

End Concreting Providing and laying end concreting using M20 grade conrete to the end of Pipe at the jnction of Manhole with necessary cleaning, pouring ,conreting ,curing ..etc complete comply with the requirements of IS Standards and as directed by SIPCOT officers.

Construction of STP - 220 KLD

1) Civil Construction works

a) Design, vetting, Construction of RCC Collection sump (25000litres capacity below last sewer manhole invert level) of Size 3.5mx3.5mx6m including necessary earthwork, excavation, refilling, Sand filling, PCC, RCC, Reinforcement, formwork, inner and outer plastering, flooring, water proofing and all other finishing works etc all completed as directed by SIPCOT SIPCOT Officer.

b) Design, vetting, Construction of RCC bar screen of Size 0.5mx1.0mx1.5m including necessary earthwork, excavation, refilling, Sand filling, PCC, RCC, Reinforcement, formwork, inner and outer plastering, flooring, water proofing and all other finishing works etc all completed as directed by SIPCOT SIPCOT Officer.

c) Design, vetting, Construction of RCC Equalization tank 5mx6mx2.5m + FB (75000 litre capacity) including necessary earthwork, excavation, refilling, Sand filling, PCC, RCC, Reinforcement, formwork, inner and outer plastering, flooring, water proofing and all other finishing works etc all completed as directed by SIPCOT SIPCOT Officer.

d) Design, vetting, Construction of RCC Reaction tank 5mx6mx3.5m + 0.5(100000 litre capacity)including necessary earthwork, excavation, refilling, Sand filling, PCC, RCC, Reinforcement, formwork, inner and outer plastering, flooring, water proofing and all other finishing works etc all completed as directed by SIPCOT SIPCOT Officer.

e) Design, vetting, Construction of RCC Filter feed tank 5mx4mx2m + FB (50000 litre capacity)including necessary earthwork, excavation, refilling, Sand filling, PCC, RCC, Reinforcement, formwork, inner and outer plastering, flooring, water proofing and all other finishing works etc all completed as directed by SIPCOT SIPCOT Officer.

f) Design, vetting, Construction of RCC UF feed tank 5mx2.3mx2.5m + 0.5 FB (40000 litre capacity) including necessary earthwork, excavation, refilling, Sand filling, PCC, RCC, Reinforcement, formwork, inner and outer plastering, flooring, water proofing and all other finishing works etc all completed as directed by SIPCOT SIPCOT Officer.

g) Design, vetting, Construction of RCC Sludge sump 5mx4.0mx3.0m +0.5 FB (60000 litre capacity) including necessary earthwork, excavation, refilling, Sand filling, PCC, RCC, Reinforcement, formwork, inner and outer plastering, flooring, water proofing and all other finishing works etc all completed as directed by SIPCOT SIPCOT Officer.

h) Design, vetting, Construction of RCC Product tank 10x2.5x3m +0.5 FB (75000 litre capacity) including necessary earthwork, excavation, refilling, Sand filling, PCC, RCC, Reinforcement, formwork, inner and outer plastering, flooring, water proofing and all other finishing works etc all completed as directed by SIPCOT SIPCOT Officer.

2) Mechnical Works

a) Supply, errection and testing & commissioning of Bar Screen to remove the large sized particles present in the sewage water with 500 x 800mm Size in SS 304 of 8mm thick Rods & 18mm space between the bars welded to a "L" angle of size 50 x 50 x 5mm Thick with hand rake.

b) Supply, errection and testing & commissioning of Fine Bar Screen to remove the small sized particles present in the sewage water with 500 x 800mm Size in SS 304 of 8mm thick Rods & 6 mm space between the bars welded to a "L" angle of size 50 x 50 x 5mm Thick with hand rake.

d) Supply, installation, testing and commissioning of Twin lobe, roots type rotary Air blowers complete with TEFC motor of suitable HP suitable for 415 + 10% volts, 3 phase, 50 cycles A/C supply, pulleys, V belt, drive guard, base frame, suction, NRV silencer, dampener at discharge and all other accessories as required. Capacity of Blower: 300m3@ 4000mm WC - 7.5 HP, 1 No Working + 1 No Standby

e) Supply, installation, testing and commissioning of required number of coarse bubble air diffusers 250 mm Disc in Receiving tank

f) Supply, installation, testing and commissioning of required number of fine bubble air diffusers 1000mm x90 mm dia. in SBR tank complete with heavy duty PP pipe and PU membrane, central tee, yoke, adapter and end caps.

g) Supplying, installing of Diffused aeration Pipeline for Collection & Aeration including Header, Lateral & Valves fabricated out of MSEP Pipes

h) Supplying, installing, testing and commissioning of Decanter Pump / Mechanism in heavy duty SS304 from main aeration tank to Decant tank including Decant Header along with distributors - UPVC and Solenoid Valves - CI/SS which shall be suitable for plant capacity of 80 m3/Batch.

j) Supplying, installing, testing and commissioning of two stage screw pump with SS Rotor/CI body. Screw press feed pumps: 1m3/hr @ 8000mmWC, 1no. working+ 1no.standby = 1SET.

Supplying, installing, testing and commissioning of 1m3/hr Screw Press -1no. Working

l) Supplying, installing, testing and commissioning approved make Pressure sand filter of size 1000mm, with necessary Accessories complete with Frontal piping, valves, suitable supports for mounting pressure gauges, orifice plates. The Filter shall be made of M.S with necessary protective coating inside with asphalethene and enamel coating outside The cost of filter shall also include initial charge of under bed and multi-grade filter media to suit the requirement etc., complete as per standards. Max flow rate of Each Filter= 30m3/hr.2 No Working, Max. working Pressure = 3.0 kg/sqcm., Max flow rate of Each Filter= 10m3/hr., 1 No Working

m) Supplying, installing, testing and commissioning approved make Activated Carbon Filter of size 1000mm,with necessary Accessories complete with Frontal piping, valves, suitable supports for mounting pressure gauges, orifice plates. The Filter shall be made of M.S with necessary protective coating inside with asphaltene black and outside with enamel coating. The cost of filter shall also include initial charge of under bed & Activated carbon filter media of GS 500 grade to suit the requirement etc., complete as per standards., Max. working Pressure = 3.0kg/sqcm., Max flow rate of Each Filter= 10m3/hr,

n) Supply, installation, testing and commissioning of Chlorine dosing system comprising of 100lts LDPE/ FRP tank with 10lph metering type pump and all required accessories

o) Supplying, installing, testing and commissioning approved make ELECTRO MAGNETIC FLOW METER (INLET AND OUTLET) of suitable size located as per site condition

p) Supplying, installing, testing and commissioning approved make Internal Plumping, Chlorinated Poly vinyl chloride Pipes ( CPVC) as directed by the SIPCOT Officer. joints to be made with CPVC solvent cement as per ASTM-D-2846, laid under floor / fixed on walls and in pipe shaft etc., complete.

3.UF system - 10Kl/hr

a) Supplying, installing, testing, and commissioning of UF feed pumps (Horizontal, centrifugal, monobloc type) Quantity : 2 Nos. (1W+1S), Type of Pump : Horizontal, Centrifugal, Monobloc, Capacity : 10 KLH, Total Developed Head : 25 Meter – Suction & Delivery, Motor Rating : 2.2 KW/3.0 HP, Material of Construction : SS 304, Make : Grundfos. b) Supplying, installing, testing, and commissioning of, Quantity : 1 sets, Type of Filter : JUMBO Bag, Capacity :10 KLH, Filter size : 4” x 32”, No. of Bags (inside) : 1 No. (each filter housing), MOC of Cartridge & Housing : Rugged PVC /PP. c) Supplying, installing, testing, and commissioning of, Chemical dosing system with pump & tank Quantity : 2 Nos. Type of Pump : Mechanical Pump Capacity : 0-150 LPH , Total Developed Head : 50 Meter – Suction & Delivery, Motor Rating : 0.37 KW / 0.5 HP, aterial of Construction : PP , Make : Milton Roy. d) Supplying, installing, testing, and commissioning of, Chemical dosing tank, Quantity : 1 No. Capacity : 100 Liters , Material of Construction : White LLDPE chemical tank, e) Supplying, installing, testing, and commissioning of, UF skid (MSEP with UPVC pipe work). f) Supplying, installing, testing, and commissioning of, UF backwash pumps with drive motors (1W+1S), Quantity : 2 Nos. (1W+1S), Type of Pump : Horizontal, Centrifugal, Monobloc, Capacity :16.50 m3/hr, Total Developed Head : 20 Meter – Suction & Delivery, Motor Rating :2.2 KW/3.0 HP, Material of Construction : SS 304, Make : Grundfos. g)Supplying, installing, testing, and commissioning of, UF CIP pump with UPVC pipe work and valves, Quantity : 1 No. (No standby), Type of Pump : Horizontal, Centrifugal-Monobloc, Capacity : 12.0 m3/hr, Total Developed Head : 20 Meter – Suction & Delivery, Motor Rating :2.2 KW/3.0 HP, Material of Construction : SS 316, Make : gundfos. h) Supplying, installing, testing, and commissioning of, Electrically actuated auto valves for UF automation. i) Supplying, installing, testing, and commissioning of UF membranes. j) Supplying, installing, testing, and commissioning of, UF CIP tank (HDPE), Quantity : 1 No., Capacity : 1000 Liters , Material of Construction :White LLDPE chemical tank,. k) Supplying, installing, testing, and commissioning of, UF motor control panel with PLC for semi-automatic operation. i)Supplying, installing, testing, and commissioning of, Cables for UF system drives, m) Supplying, installing, testing, and commissioning of, WET panel with Pressure gauges & Flow meters, Nos. Offered : 2 Nos., Make : WAREE/ Equivalent, Size : 100 mm – 4” (20 bar), MOC : SS, Type of Mount : Wet Panel, Flow meter : Nos. Offered : Two Nos., Make : ASTER/ Equivalent,Type of Mount :Wet Panel, n) Supplying, installing, testing, and commissioning of, Float switches, Nos. Offered :Two Nos., Make :Nivalco, Installation : UF feed and B/W tanks. o) Supplying, installing, testing, and commissioning of, Necessary electrical works, Control panel with PLC : Fabricated skid mounted type, Cabling as required : Suitable for power drive, Between panel & drives.

4. Electrical and Instrumentation works:

Supplying, installing, testing and commissioning Approved make common control panel and cables for filter feed pumps, Raw sewage transfer common control panel for Filter feed pumps, raw sewage transfer pumps, Return sludge transfer pumps, Blowers, Flushing and Screw Pump.

Security Cabin

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers. (including refilling) 0 to 2 m depth

Supplying and filling in foundation and basement with Stone dust/Quarry dust in layers of 150 mm thickness well watered ramming, consolidation etc. complete as per standard specifications and as directed by SIPCOT officers

Providing Plain Cement Concrete 1:4:8(One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with standard specifications and as directed by "SIPCOT" officers. (in all heights and all depths)

Brick work in Cement Mortar 1:5 (One part Cement and five part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Brick work in Cement Mortar 1:6 (One part Cement and six part M sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and Floors including curing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Ground floor

First floor

Providing brick masonry partition wall 115 mm thick using II class ground moulded chamber burnt bricks of size 9" x 4.5" x 3" in cm 1:4 (one cement and four M sand ) including supplying and providing 2 nos. of 6 mm dia hoop reinforcement at every 4th layer, curing, raking out of the joints etc., complete compiling with standard specification.

In ground floor

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and as directed by SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

a) Foundation and basement

b) Ground floor

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

a) For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete

b) For reinforced cement concrete works such as floor and roof slab, lintels, beams staircase waist and landing slab and plane surfaces and other similar works. (0-3 m)

c) For RCC surface of columns and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the SIPOCT SIPCOT Officer. before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the SIPCOT SIPCOT Officer. before use on work

Supplying and fixing mild steel grills for windows, ventilators veranda enclosure, ladder and gate as per the design approved including one coat of primer and labour for fixing in position etc, all complete complying with standard specifications and as directed by "SIPCOT" officers. (The design of grill should be got approved from the SIPCOT SIPCOT Officer. before use)

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer’s specifications etc, all complete complying with standard specifications and as directed by "SIPCOT" officers

Weathering course with broken brick jelly lime concrete using 40 to 20 mm gauge broken brick jelly in pure slaked lime (no sand) over roof slab to the proportion of brick jelly to lime (fat lime) being 32 : 12 1 /2 by volume well beaten with wooden beaters, for giving the required slope and thickness including laying and finishing, etc, all complete complying with standard specifications and as directed by "SIPCOT" officers

Finishing the top of roof slab with one course of hydraulically pressed tile of approved superior quality of size 23 cm x 23 cm, 20 mm thick laid over weathering course in cement mortar 1:3 (One of cement and three of M sand) 12 mm thick, mixed with water proofing compound at 2% by weight of cement used and pointed neatly with the same cement mortar mixed with water proofing compound including curing etc., complete in all respects complying with relevant standard specifications and as directed by the engineer in charge. (Note: Tiles to be got approved by the SIPCOT SIPCOT Officer. before use and only one particular size pressed tiles should be used for one type of building)

Plastering in C.M 1:3 (one of cement and three of M sand) 10 mm thick for bottom of sunshade, ceiling in all floors, including scaffolding, curing, finishing, etc., complete complying with standard specification and as directed by SIPCOT officers.

Plastering with cement mortar 1:5 (One of cement and five of M sand) 12 mm thick finished with neat cement including, providing band cornice, ceiling cornice scaffolding curing etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., complete complying with standard specification and as directed by SIPCOT officers. (The colour and shade of the distemper shall be got approved by the SIPCOT oficials before use of work).

Painting the new walls (Interior ) with two coats of approved cement paint in addition to one coat of approved primer over cement plastered wall surfaces etc. including cost of cement paint, brushes, etc., complete complying with standard specification and as directed by SIPCOT officers. (paints and its shade shall be got approved from the SIPCOT official before using)

Painting two coats of newly plastered External wall surface with ready mixed Weather proof Exterior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors excluding cost of priming coat etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.. (The make, quality and colour of paint should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by "SIPCOT" officers. (The steel rods must be Fe 500 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

Supplying and fixing of wrought and put up in position of frames inclusive of fixing holdfasts for doors, windows and ventilators etc.

Supplying and fixing of Solid Core Flush Shutters with teakply on both side with teakwook lipping alround 35mm thick with Ornamental Door Handle 200mm long – 2 nos, 5" Butt Hinges – 3 nos, 250mm long and 12mm dia Tower Bolt – 2nos, Mortice Lock With Night latch (Godrej or Equivalent) with required screws with 3 Keys – 1 no, Rubber Bush - 40mm dia – 1no and door stoper 1no etc., cost including all material, labour charges and all hardwar materials etc., all complete complying with standard specification as directed by the SIPCOT Officer.

Supplying and fixing Solid panel PVC door with frame using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter etc., all complete complying with standard specification as directed by the SIPCOT Officer.

Supplying and fixing of 110 mm dia PVC pipe for rain water down fall pipe conforming to IS13592 with ISI mark and fittings conforming to IS 14735, with necessary C I gratings, shoes, bends, offsets, clamps, teak wood plugs, etc., of approved quality including fixing C.I. gratings at the junction of parapet and floor or roof slab, finishing etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Supplying and fixing in position best quality approved make colour glazed earthenware Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia ‘B’ Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection,15mm dia Brass Nipples, 15mm CP Pillar Tap etc

Supplying and fixing in position Ordinary colour Glazed European Water Closet of best quality and approved make with 100mm 'P' os 'S'' trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard spoecifications

Providing and Laying Saucer drain of Size 600mmx300mmx100mm including necessary pointing with CM 1:3, curing , conveyance , labour charges etc., complete complying with standard specification and as directed by SIPCOT officers.curing

Construction of Inspection Chamber of inner clear size of 0.60 X 0.60 meters and average depth of 0.75 m with a base concrete of 100 mm thick cement concrete 1:4:8 (One cement, five sand and 8 aggregate) the chamber should be constructed in brick masonry 230 mm thick in cement mortar 1 : 5 using country brick of size 8 ¾ X 4 ¼ X 2 ¼ . The inner side of chamber plaster with cement mortar 1 : 3 -12 mm thick. The chamber top covered with R.C.C. precast slab 1 : 2 : 4 (one cement two sand and four aggregate) 7.5cm thick. The rate is including cost of materials labour etc completed including plastering with C.M. 1:3 -12 mm thick on inner side and top covered with RCC pre cast slab of 7.5 cm thick etc complete complying with standard specification

Supplying and fixing in position 150 X 100mm square mouth 'P' or 'S' trap stoneware Gully Ttrap A grade with castiron gratings of size 150 X 150mm with C.I. air tight cover with frames of size 300 X 300mm at bottom and top respectively laid over a bed of brick jelly cement concrete 1:3:6 150mm thick using 40mm size broken brick jelly including neccessary brick work and plastering and including dismandling masonry wherever necessary and redoing the damaged portions to the original condition and by using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to the stonewere sewer line etc., complete complying with standard specifications (the stonewere gully trap should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position best quality CPVC (Chlorinated Poly Vinyl Chloride) Pipe (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio–11. pressure BIS mark and providing leak proof joints using CPVC adhesives including fixing to the wall with special CPVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The CPVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

a) 20mm dia Concealed line

b) 20mm dia Below GL

Supplying and fixing in position best quality P.V.C soil/waste pipes of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standards (the P.V.C. pipes sholud be got approved by the Executive Engineer before use on works)

a) 110mm dia

b) 75mm dia

Supplying and laying of ceramic tiles anti-skid 305 x 305 x 6 mm of approved special quality laid in cement mortar 1:3 (One of cement and three of sand) 20 mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc all complete in all respects complying with relevant specification and as directed by engineer in charge. Note: (The colour and quality shall be approved from the Engineer before use)

Dadooing for walls Supplying and fixing in position of colour glazed designed wall tiles of any size 6 mm thickness laid in cement mortar 1:2 (One of cement and two of sand) 10 mm thick for wall facing / duding, skirting over the plastered surfaces including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the Engineer in charge. Note: (The colour make and quality shall be approved from the Engineer before use)

Supplying and fixing of Stain Free Nano Polish vitrified tiles of size 600 mm x 600 mm x 8 mm of best approved quality and colour laid in cement mortar 1:3 (One of cement and three of sand) 20 mm thick and pointed with coloured cement neatly including cutting to the required size and shape wherever necessary finishing neatly etc. all complete complying with relevant standard specification and as directed by the Engineer in charge. (The colour and quality of the tiles should be got approved by the Engineer before use)

Fencing, Driveway, Drain Etc.,

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers. (including refilling) 0 to 2 m depth

Earthwork excavation in all stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, Stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 meter and lifts as specified hereunder etc. complete as per standard specifications and as directed by SIPCOT officers (excluding refilling)

Providing Plain Cement Concrete 1:4:8(One cement, four sand and eight Jelly) using 40mm size Hard broken granite stone jelly for foundation concrete etc. laid in layers not exceeding 15cm thick including dewatering wherever necessary well rammed, consolidated etc. complete complying including cost and conveyance of all materials and labour to work site, mixing, laying, compacting ,curing with all leads of soft potable water with standard specifications and as directed by "SIPCOT" officers. (in all heights and all depths)

Plain cement concrete pavement with CC1:1.5:3 (one of cement : one and half of Msand: six of hard broken stone jelly 20 mm nominal size) including laying, curing, finishing etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying and Fixing in position of barbed wire fencing using 10 gauge 2 ply 4 pronged barbed wire (Galvanised) etc complete in all respects and as directed by SIPCOT SIPCOT Officer.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as directed by the SIPCOT SIPCOT Officer.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete complying with standard specifications and as directed by "SIPCOT" officers..

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all Floors excluding cost of priming coat etc, all complete complying with standard specifications and as directed by "SIPCOT" officers.. (The make, quality and colour of paint should be got approved by the SIPCOT SIPCOT Officer. before use on works.)

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 350 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (0.5 cu.m.) 773 kg. of 20mm machine crushed stone jelly and with about (0.33 cu.m.) 515.6 kg. of 10-12mm machine crushed stone jelly and with about (0.479 cu.m') 767 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT Officer.s. The coarse and fine aggregates to be used should comply with the requirements of IS Standards and as directed by SIPCOT officers. (No separate payment will be made by the Department for the excess usage of materials).

a) Foundation and basement

b) in Ground floor

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., complete complying with the standard specificaiton and as directed by SIPCOT officers. (Payment for centering shall be given after the concrete is laid)

a) For R.C.C. works in foundation and basement such as grid beam, plinth beam, raft beam, raft slab, column base, column footings, other similar nature of works etc all complete

c) For RCC surface of columns, vertical wall and in small quantities such as sunshades, parapet cum drops, window boxing in projections and other similar works.

Plastering with cement mortar 1:5 (One of cement and five of M sand) 12 mm thick finished with neat cement including, providing band cornice, ceiling cornice scaffolding curing etc., complete complying with standard specification and as directed by SIPCOT officers.

Painting two coats of newly plastered External wall surface with ready mixed Weather proof Exterior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. I R.T.S. rods of all sizes of reinforcement for all Reinforced cement: concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length wherever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by "SIPCOT" officers. (The steel rods must be Fe 500 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

Providing and laying 83 mm thick factory made cement concrete interlocking paver block of M-40 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc., complete complying with the standard specificaiton and as directed by SIPCOT officers.

Construction of Granular Sub - Base (GSB) to the required compacted thickness (Drainage layer) by providing approved Coarse graded material conforming to Grading-V of Table 400 - 1 and satisfying the physical requirement for material for GSB as per Table 400 - 2 of MORTH Rev -5 including screening, spreading in uniform layers with motor grader on prepared surface, watering and premixing by mix in place method with rotavator at OMC, and compacting with Vibratory roller 80 to 100 KN static weight to achieve the desired density and fine dressing to required grade and cross slope as directed by the SIPCOT officers etc., complete including obtaining and transporting all materials from approved quarry site to work site with all lift and lead by mechanical transport, head load or any other mode of transporation including cost and conveyance of all materials, labour charges,hire charges and fuel charges for loader, water tanker with sprinkler,motor grader, vibratory road rollers and all other equipments, tools and plants, safety measures, testing required including all other incidental charges, etc., complete as per the standard specification as per clause 401 of MORTH Rev.-5 and as directed by the SIPCOT officers.

Providing, laying, spreading and compacting graded stone aggregates for Wet Mix Macadam 250mm thick, including premixing the materials with water at OMC in mechnanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5