Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹14.6 LAccepted-AOC WZ 484 M S BLOCK HARI NAGAR NEW DELHI 110064 | NEW DELHI | NEW DELHI | DELHI | 110064 | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹16.7 L+₹49,830 (3.08%)Rejected-Finance HOUSE NO 413 MAGADH COLONY SHERGHATI ROAD GAYA BIHAR PIN 823001 | GAYA | BIHAR | 823001 | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹16.8 L+₹65,565 (4.05%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹18.8 L+₹2.6 L (16.0%)Rejected-Finance EAST DIGHI TANK OLD LIC CAMPUS NEAR BALAJI MARKET GAYA 823001 BIHAR | GAYA | GAYA | BIHAR | 823001 | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹20.4 L+₹4.2 L (26.2%)Rejected-Finance MOCHARIM BODHGAYA GAYA 824231 | BODHGAYA | GAYA | BIHAR | 824231 | 5 | Rejected-Finance NOT LOWEST |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
11 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE GAYA
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar, PIN-823005
Repair/replacement of LT over headline, UG cables and other allied works at Mil Stn Gaya
2023_MES_604423_1
8022/GE/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GAYA
₹60,000
Yes
5 Sept 2023
20 Jun 2023
13 Jul 2023
20 Jun 2023
11 Jul 2023
4 Jul 2023
Amount
Dismantling of unserviceable steel tubular/PCC poles any size and removal from site complete.
Refixing of old steel tubular swaged poles any type/size/length obtained from item Ser No 01 above after dismantling and erecting in new location as directed by Engr-in-charge for provn of two poles structure including painting the exposed portion with two coats of aluminium paint over a coat red oxide primer and painting of 30 cm black and white strips upto 0.9 mtrs from bottom of the erected pole complete all as specified and directed. Note : (a) Rate quoted shall be deemed to be inclusive of the following (i) Any repair/welding/fabrication work on the old poles. (ii) Any rusted surface on the old pole shall be treated wtih red oxide primer to application of aluminium paint (b) Necessary excavation, earthwork and PCC work will be measured and paid separately.
Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 mtr deep for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and not exc 1.5m in depth and getting in hard/dense soil complete all as specified and directed by Engr-in-charge
Returning, filling in, including spreading, watering and well ramming in layers not exceeding 25cm complete all as specified and directed by Engr-in-charge.
Removing of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge
M & L PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in foundation of poles.
M & L for PCC 1:3:6 type C1 using 40mm graded stone aggregate as in copping/collar of poles and foundation of stay assembly etc complete all as specified and directed.
M & L for PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in copping of poles including taking down old PCC copping of poles all as specified and directed.
Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site.
Supply and laying for brick of common burnt clay, sub class 'B' old size laid flat and dry on cables as in cable protection in trenches over cables perpendicular to direction of cales abutting each other complete all as specified and directed.
Steel tubing galvanised iron, light grade 40 mm bore for cable protection along the pole, under road/ depth or under drains complete including 30x5mm FI clamps made to shape incl nuts, bolts & washers complete and taking down old unserviceable pipe all as specified all as specified and directed
All as per serial item No: 11 here-in-before but of size 50mm bore.
Taking down existing old ACSR from PCC/Steel poles complete all as specified and directed.
Taking down existing old cross arms of MS channel or angle sections etc all as specified and directed.
Labour only for re-stretching properly sagged/loose ACSR conductor of any size fixed on LT poles by means of machine method to the permissible limit at different location including tightening of cross arms or D clamps and binding with new binding wire, tightening of jumpers complete all as specified and directed. (Note: 1. Pole to Pole of all line conductor shall be measured as Per RM. 2. Rate including unwinding of old winding wire and rewind with new binding wire after restretching)
M&L for PVC Junction box of size 340mm x 285mmm x 120mm outdoor type, weather proof, factory made out of PVC sheet 1.8mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and outgoing cable/wire complete comprising of aluminium bus bar for 3 phases & neutral, insulated with insulators, including colour coding and 01 Nos MCB 06 Amps complete including taking down old unserviceable junction box all as specified and directed. Make: Sintex Model : GSMB-3428/ National Model No: NJB3020 / Mahindra Composits
Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip 25x4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion
M & L danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamps, bolts and nuts of approved size for LT 20x15cm size complete all as specified and directed.
Cross arms, bracings, supports, clamps and back plates fabricated from and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of silver / aluminium paint complete
Locating the fault in LT cable of any size for any type of fault like open cable, short between phases/ neutral, grounded cable with help of cable fault locator and pin pointing location with the help of audio signal, exacavation at the fault and opening cable to suitable distance and depth for making a cable joint complete all as speified and as directed. (Note: 1. The joint kit and necessay earth work will be measured and paid separately. 2. Contractor will have to arrange the cable fault locator or other testing equipments/ tools as required and same shall be deemed to be included in the item rate quoted.)
Taking down existing old unserviceable underground LT cable upto size 50 Sqmm, 4/3.5 /2 core keeping aside for reuse/removal from trenches/ wall/pole complete all as specified and directed.
All as per item Srl No: 21 here-in- before but LT cable size of 70 to 150 Sqmm x 3.5 Core
M & L in repair for LT heat shrinkable straight through joint for PVC/XLPE insulated armoured cable of size upto 50 Sqmm complete all as specified and as directed. Make: Raychem/M-Seal
All as per item Srl No: 23 here-in- before but for LT cable size of 70 Sqmm to 150 Sqmm x 3.5 Core
All as per item Srl No: 23 here-in- before but for LT cable size of 185 Sqmm to 240 Sqmm x 3.5 Core
Relaying of cable upto 50 Sqmm 4/3.5/2 Core after rectification of defects in the same in trench/wall/pole or at any other location complete all as specified and directed by Engineer-in-Charge.
All as per item Srl No: 26 here-in- before but for LT cable size of 70 Sqmm to 150 Sqmm x 3.5 Core
Supply, laying and testing PVC insulated, screened, PVC bedded, galvanised steel strip or wire electric power cable 1100 volts with stranded aluminium conductor of size 10 Sqmm 2 core complete all as specified and as directed.
Supply, laying and testing XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured heavy duty electric power cable 1100 volts with stranded aluminium conductor of size 10 Sqmm 4 core laid in trenches or under road complete all as specified and as directed.
All as per item Srl No: 29 here-in- before but of size 25 Sqmm 3.5 core.
All as per item Srl No: 29 here-in- before but of size 50 Sqmm 3.5 core.
All as per item Srl No: 29 here-in- before but of size 70 Sqmm 3.5 core.
All as per item Srl No: 29 here-in- before but of size 95 Sqmm 3.5 core.
All as per item Srl No: 29 here-in- before but of size 120 Sqmm 3.5 core.
Supply, installation,commisioning and testing LT feeder pillar box out door type double door and single shutter front open including locking arrangement system made out of MS sheet of 3.15 mm CRCA sheet of size 0.6x0.6x0.3 mtr and double door,canopy,dust proof, bottom cable entry plate and gland for cable size150/120/95/70/50/25/16/10 sqmm 3.5 core suitable MS angle iron 40x40x5 mm with aluminium busbar size 600Amps system mounted on hygroscopic insulators bus bar including suitable nut, Bolt and Washer(16 Nos) & including powder coated paint with and providing necessary foundation/ plateform of the feeder pillar height 1.5 feet from groundwith PCC 1:2:4 type B2 including provision of for incomong and outgoing cable gland, thimbling for old / new cables as per site requirement and proper finshing as per existing surface complete all as specified and directed by Engr- in- Charge. Note: Drawing for LT feeder piller box shall be got approved by GE before fabrication.
M/S CHAUHAN CONSTRUCTION
M/S PANCHAM RAI SONS
M/s Subham Traders
M/S NARAYAN & SHARMA
SUDHIR KUMAR SINGH
M/S ABHAY KUMAR AND BROTHERS
ashiyana electrical company
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .