Providing water facilities to village Fafan-Saned and Bhagetu in Tehsil and Distt. Hamirpur H.P. SH- Construction of Pump House No.-1 and 2- clear water tank 80000 Liters capacity- 60000 liters OHSR 10 meter staging height and boundary wall

Amount

Excavation in foundation , trenches etc., in all kinds of soil such as pick work, jumper work blasting work, in soft / hard rock, including chiseling wedging out of rocks clearance of bushes etc.including shoring, dewatering etc. in all leads and lifts stacking the excavated soil upto any lead and lift clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth , sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus earth within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge of the site of work.

Providing and Laying cement concrete1:6:12 (1Cement :6Sand:12 graded stone aggregate 40 mm nominal size) including curing complete excluding the cost of form work in foundation and plinth in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.

Random rubble stone masonry/polygonal rubble masonery ( uncoursed / brought to couses) with hard stone of approved quality in foundation & plinth including leveling up with cement concrete 1:6:12 ( 1cement :6sand : 12 graded stoene aggregate 20mm nominal size ) at plinth level in cement mortar 1:6 ( 1 cement :6 sand )in all leads & lifts & to the entire satisfaction of Engineer-in-Charge

Brick work using common burnt clay building bricks (IInd class) Super-structure above plinth level upto floor two level in cement mortar 1:6 (1cement:6 sand) in all leads andlifts and to the entire satisfaction of the Engineer-in-Charge.

Brick work using common burnt clay building bricks (IInd class) infoundation and plinth level upto floor two level in cement mortar 1:6 (1cement:6 sand) in all leads andlifts and to the entire satisfaction of the Engineer-in-Charge.

Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position with second class deodar wood in all leads andlifts and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws in all leads andlifts and to the entire satisfaction of the Engineer-in-Charge.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain.

Vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. above 200mm. In thickness with in all leads and lifts & to the entire satisfaction of the Engineer-in-charge

Beams,cantilevers,girders & lintels, sides & soffits of beams, haunching,cantilevers,bressumers 1.00 mts. In depth in all heights from floor in all leads and lifts.

Edges of slab in all leads and lifts & to the entire satisfaction of the Engineer-in-charge

Providing and Laying cement concrete1:3:6 (1Cement :3Sand:6 graded stone aggregate 40 mm nominal size) including curing complete excluding the cost of form work in foundation and plinth within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge.

Providing and Laying cement concrete M-25 Mix( not leaner than1:1.5:3 (1Cement :1.5 Sand:3graded stone aggregate 20 mm nominal size) & curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :-

Foundation, footings, bases of columns etc. and mass concrete in all leads and lifts

Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses ,plinth and string courses etc. from top of foundation upto floor two level in all leads and lifts.

Arches upto floor two level in all leads and lifts.

Suspended floors,roofs,landing shelves and their supports balconies beams,girders bressumers and cantilever upto floor two level including carriage of material in all leads & lifts.

Providing and Laying cement concrete1:1.5:3(1Cement :1.5 Sand:3 graded stone aggregate 20 mm nominal size) & curing complete excluding the cost of form work and reinforcement for reinforced concrete work in foundation and plinth including carriage of material in all leads & lifts.

Providing from work of ordinary timber plankings so as to give a rough finish including centring,shuttering, strutting and propping etc. height of propping and centring below supporting floor to ceililng not exceeding 4 metres and removal of the same for insitu reinforced concrete.

Arches beyond 6 metres span including carriage of material in all leads & lifts.

Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 (1 cement : 3 sand) with in all leads and lifts & to the entire satisfaction of the Engineer-in-charge.

Providing tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level including carriage of material in all leads & lifts.

Steel work welded in built up sections,trusses & framed work, including cutting ,hoisting & fixing in position & applying a priming coat of red lead paint :- In grating, framed ,guards,bars, ladders, railing, brackets & similar works in all leads and lifts..

Laying jointing and testting of GMS pipe following dia (medium class) for scour pipe, inlet pipe , over flow pipe & distribution system including carriage of material in all leads & lifts.( Labour rates.)

80mm dia .

Providing and fixing double flanged C.I sluice valve of Kirloskar /Leader/ Bir /Kartar/ Pelcian /Leader/LP /RG/Sachdeva with M.S. flanges of table 5 of 80 mm dia (with hand wheel) as per IS: 780 (including brass spindleand as per IS: 2906 Class-II complete with bolts., nuts, rubber insertion etc. ( along with tail pieces if required) within all leads and lifts as per direction and to the entire satisfaction of the Engineer-in-Charge

Constructing chamber for sluice valves with C.I surface box 100mm top diameter, 160mmbottom diameter and 180mm deep (inside with chained lid and RCC top slab1:2:4(1cement:2sand: 4 graded stone aggregate 20mm nominal size ) 100mm thick foundation concrete 1:5:10 (1cement :5sand:10 graded stone aggregate 40mm nominal size ) and insideplastering with cement mortar 1:3(1cement:3sand) finished with a floating coat of neat cementincluding curing complete with 600x600x750mm inside size with 150mm thick wall of RCC 1:2:4 ( 1cement :2sand :4 graded stone aggregate 20mm nominal size ) complete with formand reinforcment with 6mm bars at not exceeding 150mm centres both ways in all leads andlifts and to the entire satisfaction of the Engineer-in-Charge.

Manufacturing & fixing manhole cover of size 60x60cm made of angle iron size 40x40x5mm thick covered with M.S .flate including hingeses, handles, holdfast,locking arrangemetns, lock key Standard make including priming coat with red oxide paint and fixing with cement concrete 1:1.5:3 ( 1cement :1.5 sand :3graded steone aggregate 20mm nominal size ) complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer-in-Charge

20 mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(1cement:6sand) within all leads and lifts.

6 mm cement plaster to ceiling in cement mortar 1:3 (1Cement :3 Sand) in all leads and lifts.

Flush pointing on brick / stone masonery in cement mortar 1:3 (1Cement :3 Sand) in all leads and lifts.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement:3sand:6 graded stone aggregate 20mm nominal size) including finishing of the top surface of concrete smooth in all leads and lifts.

Cement concrete flooring 1:2:4(1cement:2sand:4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement (40mm thick) in all leads and lifts.

Providing and fixing M.S. grill of required pattern in wooden frames of windows etc. with M.S. flat square or rounded with round head nuts and bolts or by screwed complete in all leads and lifts.

Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil dirt grease and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink in all leads and lifts.

Painting two coats(excluding priming coat) on new wood and wood based surface with ready mixed paint brushing the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white in all leads and lifts.

Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dial meters bolts and nuts and wooden plug and embeding in cement mortar block 30x10x15cm 1:3:6(1cement:3sand:6 graded stone aggregate 20mm nominal size in all leads and lifts.

Providing and fixing anodized aluminium Sliding door bolts 250x16mm of anodized transparent and shade with necessary screw etc.complete in all leads and lifts.

Providing and fixing anodized aluminium tower bolts (Barrel type) of 200x10mm.of anodized transparent and shade with necessary screw etc.complete in all leads and lifts.

Providing and fixing anodized aluminium tower bolts (Barrel type) of 100x10mm.of anodized transparent and shade with necessary screw etc.complete in all leads and lifts.

Providing and fixing anodized aluminium handles 125 mm dia of anodized transparent and shade with necessary screw etc.complete in all leads and lifts.

Providing and fixing anodized aluminium handles 75 mm dia of anodized transparent and shade with necessary screw etc.complete in all leads and lifts.

White washing with lime on undecorated walls surface (two coats) to give an even shade including thoroughly brooming the surface dirt dust mortar dirt and other foreign matter in all leads and lifts.

Distempering two coat with dry distemper of approved brand and manufacturers of required shade of undecorated wall surfaces to give even shade over and including a priming coat with alkali-resistance primer of approved brand and manufacturer after throughly brushing the surface from motor dropping and other foreign matter and also including preparing the surface even and sand papering smooth priming coat with distemper primer in all leads and lifts.

Finishing wall with water proofing cement paint of approved brand & manufacture & of required shade on undecorated wall surfaces (two coats) to give an even shade after thotoughly brushing the surface to remove all dirt & remains of loose powdered materials.

Stone/Boulder filling dry hand packed tightly complete under lean concrtete / floors/behind retaining walls in all leads and lifts.

Providing under layer for plinth protection of 75 mm thick (unconsolidated) bed dry brick / stone aggregated 40 mm nominal size will rammed and consolidated and grouted with fine sand including preparation of ground complete in all respect within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge of the site of work.

Providing and fixing M.S.fan clamp(Type-I of 16mm dial M.S. Bar bent to shape with hooked ends in RCC. Slab during laying including painting the exposed portion of loop all as per standard design complete in all leads and lifts.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Manufacturing supplying and fixing of fencing panal of size 1.20x1.80 meters of Jali 25x25mm welded to M.S. black tube of 32mm dia of 14 guage with M.S. flats 20x3mm, welded all around the pipe panel two on both side and propviding hold fasts 7 Nos of M.S flate of 32x3mm thickness having consting of tee of size 15x15 cms tee acting as hold fasts including cutting, welding, painting witth read oxide paint complete in all respects the work should be executed as per the entire satisfaction of the Engineer-in-Charge complete in all respects .

Construction of RCC 1No over head tank 60000 litres with 10metre staging height in M30 (Desigm Mix) from ground level to bottom of dome slab comprising of inlet,scour & over flow pipes as per deatails given below from G.L. to tank including bends of required degrees,valves of reqd.size conforming to relevants codes RCC Spiral 1.0 mtrs.wide stair case/MS stair case i/c GMS pipe railing as per IS specification,steel ladder 45 cms.wide of usual height as per site requirement M.S. manhole covers (Medium duty) 75xmx75cm fabricated with 3.15mm thick M.S sheet welded over M.S. angle iron frame of 40x40x6mm hinged on a frame of M.S. angle 50x50x6 properly grouted on the roof and having locking arrangement ventilator at Top done with minimum opening od 90x90cm. water level indicator including floats and measuring gauge, lightening conductor with earthing arrangement etc.The RCC over head reservoir shall include randering/plastering of the uneven expose surface, two coats of snowcem paint and any other component reqd.for the completion of the job to the entire satisfaction of Engineer-in-charge.The offers shall also include detail structural drawing / design calculations to be approved by the competent authority based on the raft foundation by taking seismic forces in the design calculation expension joints as required at site.The offer shall also i/c the cost of providing and fixing of GMS/MS pipes,and valve/fitting complete i/c duck foot bends,puddle collars,expansion joints etc.connecting with rising main & distribution main with reqd. length from the edge of foundation and any other components required for the completion of job upto the entire satsfactionof the Engineer-in-Charge. Inlet pipe = 80mm Outlet pipe= 100mm Scour Pipe = 100mm

BBN Enterprises

Tilak Singh

manglesh thakur

Dinesh Kumar Sharma

Ankush Dhiman

VINAY KUMAR SHARDA