Some allied electrical installation work emergency points, wiring, power points etc. at Parijat Villa, Cooch Behar

Dismantling Dismantling the existing Electrical Fittings-fixtures by engaging Manpower [1(One)No Semi Skilled Electrician + 1 (One)No Helper Electrician] and Co's own tools & tackles with proper care of electrical equipments and appliances as per direction of EIC and carrying to section office as per Direction of EIC

Distribution wiring Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make-Polycab/Havells/KEI or Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make MMS) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Make: Legrand Myrius/Anchor - Roma Urban/Havells- Crabtree or Brand approved by EIC) fixed on Modular GI switch board complete with 3 nos. suitable size “Ph,N & E” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed] Average run 9 mtr

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make-Polycab/Havells/KEI or Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make MMS), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light points with 2 no. 2 way Modular type switch (Make: Legrand Myrius/Anchor - Roma Urban/Havells- Crabtree or Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph,N & E” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. Average run 9 mtr

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) + 1x22/0.3 (1.5 sqmm) for ECC single core stranded 'FR' PVC insulated & unsheathed copper wire (Make-Polycab/Havells/KEI or Brand approved by EIC) in suitable size PVC casing-capping (Precision make) [for horizontal run & ceiling portion] and partly in 19mm bore, 3mm thick polythene concealed pipe [for vertical run embedded in wall only], incl. necy. fittings etc. with S & F 6A 5 pin Modular type plug socket and switch (Legrand: Mylinc White) fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping on surface and Switch board concealed]. On Board

Distribution wiringin 1.1KV grade 2x22/0.3 (1.5sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire with1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make-Polycab/Havells/KEI or Brand approved by EIC) for ECC in 19 mm bore, 3mm thick polythene pipe complete with all accessories embedded in wall for horizontal & vertical runs and in suitable size PVC casing-capping (Precision make) for ceiling portion only, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plateand 3 nos. suitable size “Ph,N & E” copper bar& earthing attachment flushed in wall incl. mending good damages tooriginal finish [only PVCcasing-capping on ceiling and remaining portion concealed] Avrg run 9 Mtr

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire andmending good damages to original finish by using own tools and tackles [for vertical run embedded in wall ] 19 mm dia 3 mm thick polythene pipe without earth continuity wire

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works 20 mm Size

25 mm Size

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Polycab/Havells/KEI or Brand approved by EIC)) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 3 x 22/0.3 (1.5 sqmm)

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) as ECC.

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) as ECC.

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Polycab/Havells/KEI or Brand approved by EIC) of following sizes in 25 mm PVC casing- capping (Precision make MMS incl. necy. PVC clips, fittings etc.

2x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 1.5 sqmm

Plug,Sockets etc. Supplying & Fixing GI Modular Switch Board (Make: Legrand Myrius/Anchor - Roma Urban or Brand approved by EIC) of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to buildingwork a) 2 Module

b) 4 Module

2 Row 12 Module

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works c) 8 Module

Supply & Fixing 240 V 16 A Modular type switch (Make: Legrand Myrius/Anchor - Roma Urban or Brand approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required

Supply & Fixing 240 V, Three nos 6 A, 3 pin Modular type plug socket (Make: Legrand Myrius/Anchor - Roma Urban or Brand approved by EIC) with Three Nos 6A Modular type switch, without plug top on 12 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity including three no suitable size Copper bar with holes (for PH N & E) fixed on hard rubber/bakelite insulator wire etc.

S&F 240 V, 16 A, 3 pin Modular type plug socket (Make: Legrand Myrius/Anchor - Roma Urban or Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 3 nos. 16 A, 3 pin Modular type plug socket with 3 nos. 16A Modular type switch (Make: Legrand Myrius/Anchor - Roma Urban or Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 12 Module GI Modular type switch board with 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Make: Legrand Myrius/Anchor - Roma Urban or Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc

Supply & Fixing 240 V 25 A,Modular type starter (Make: Legrand Myrius/Anchor - Roma Urban or Brand approved by EIC) with 2 Module GI Modular type switch board with 2 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing Two nos.240 V, 6A, plug socket with separate Two nos. 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supplying & Fixing folowing size sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works

150 mm x 100 mm x 65 mm

175 mm x 100 mm x 65 mm

Supply & Fixing bakelite / perspex top cover on existing following size switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as require

150 mm x 100 mm x 65 mm

175 mm x 100 mm x 65 mm

Lights,Fans etc. Supply & Delivery of following LED Industrial Batten light (System lumen efficacy ≥110 lm/Watt) made of CRCA Sheet Body (Thickness ≥ 0.50 mm) and construction as per relevant IS, along with LED lamp (Opal finish polycarbonate housing with Aluminium end-cap), Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range 0o to 40o C, internal surge protection of 2.5 KV with Short & Open circuit protection ,

THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5%), life time (LED, Driver & electrical circuitary), of minimum 40000 Burning Hours, with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.).

Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FR/FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 3 year OEM warranty. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).

Single Batten Fittings (1 x 18/20 Watt) (Make:Philips-Cat.No. TMC502 1xLED 22W/Crompton Make IGP161LT8-16 1xT8 fiiting/Orient-LIBT-218-DS 1x18/20 W T8 LED Tube) including LED tube T8(Philips Cat. No 1200mm 18W865 T8 I-2100lm/Crompton-Crysta Model LTT8-20 LED tube/Orient-POWERLINE SP LTPS-20-C 20W) [Fitting and Tube Set Must be same brand]

Double Batten Fittings (2 x 18/20 Watt) (Make:Philips-Cat.No. TMC502 2xLED 22W/Crompton Make IGP161LT8-16 1xT8 fiiting/Orient-LIBT-218-DS 1x18/20 W T8 LED Tube) including LED tube T8(Philips Cat. No 1200mm 18W865 T8 I-2100lm/Crompton-Crysta Model LTT8-20 LED tube/Orient-POWERLINE SP LTPS-20-C 20W) [Fitting and Tube Set Must be same brand]

Supply and Delivery of 240V,50Hz, 15W surface mounted round LED light fitting with inbuilt LEDs[Make- Philips/ Crompton/ Wipro or manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

Supply & Delivery of 240V 9W LED lamps of following wattage with glare free light distribution having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Crompton/ Wipro or manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

Supply & Delivery of 230V, 1-phase AC ceiling fans incl. all accssories, the capacitor of fan must be P-2 type brust proof & must have safety wire directly linked from fan hook to stator of fan. (Make:Orient PSPO NEWBREEZE Pearl Ivory/ Usha-1star STRIKER/Crompton Riviera(Bianco)As per direction of EIC)

Sweep Size- 1200 mm (48"), Wattage ≤ 55 Watt, R.PM ≤ 350, Air Delivery ≥ 220 C.M.M

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Make: Legrand Myrius/Anchor - Roma Urban or Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Supply & Delivery of 230V, 1-phase AC wall mounting bracket fan (metal body & metal blade) on wall incl. S&F of MS fastners and nut & bolts etc. as reqd. [Make: EPC/Crompton/Orient]

450 mm sweep, Wattage ≤ 90 Watt, RPM ≤ 1325, Air Displacement (In CFM) ≥ 3550

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Supply & Delivery of 230V, 1-phase AC exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust fan of following diameter, complete as required. [Make: EPC / Crompton / Usha /Havells/Orient]

230 mm (9"), 4 Blade, RPM ≤ 1370 , Wattage ≤ 40 Watt, Sound level ≤ 49 dB, Air Displacement (In CFM) ≥ 440

Fixing only exhaust fan after making hole in wall and making gooddamages and smooth cement finish etc. as practicable aspossible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 23 cm (9")

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long). For Al: 23 cm Exhaust fan (9")

Supply & Delivery of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range 0o to 45o C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP- 66, IK - as specified below, CRI >70, under voltage and over voltage protection, EMI- EMC As per CISPR -15,

lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin),

SDCM (Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FR/FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90o C). System lumen efficacy ≥110 <135 lm/Watt (IK-8)

70 Watt [Make-Philips Model No. BRP502 LED105 CW R5C PSU S1 SPD/Wipro Moedl Skyline Plus/LR06 no: LR06-781-XXX-57-SP/Crompton Model Raptor Pro No:CRP-409-70-57-HL2-GL-NSG]

120 watt [Make-Philips Model No. BRP502 LED180 CW R3C PSU S1 SPD/Wipro Moedl Skyline Nxt/LR09 no: LR09-132-XXX-57-SP/Crompton Model Raptor Pro No:CRP-411-120-57-HL2-GL-NSG ]

Supply & Delivary LED Decorative Post Top light fitting in Pressure die cast Aluminum base with Prismatic polycarbonate diffuser having following wattage, with IP 66 protection & incl. 10 kV SPD, with glare free uniform illumination with CCT (5700K-6500K) having minimum luminous efficiency of 110 Lm/ Watt or better & 40,000 LED burning hours or more.

35 to 40 Watt [Make- Philips Model Uniscape Posttop No:BGP00 LED35 CW PSU GR CPC SPD/ Crompton Model Maple No: LPTO-40-CDL-M/ Wipro Model Bliss/LPo7 G01 No:LP07-431-XXX-57-CLG1 or manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

SITC of AC Machine S&D of High Wall inverter type Split Air Conditioner with R410A/R407C/R-32 Refrigerant, with Rotary Compressor with minimum Cooling Capacity of (6.6KW-7.00 KW), Air flow rate (630-875) CFM, suitable for operation on 230V,+_ 5%, 50Hz, 1Ph AC Supply. with precharged refrigerant, Wireless remote & all other accessories complete with refrigerent with 15 A Plug Top (Make Mitsubishi Electric/Daikin/O-Genera/Brand Approved by the EICl)

Installation ,testing & commissioning of l.5/1.8/2.2/2/1 ton AC machines complete with outdoor condensing unit on iron angle / powder coated bracket & indoor cooling unit on wall with suitable bracket. Rate is inclusive of cutting of wall for making holes and mending good the damages as per direction of EIC

supply and drawing 5/8' & 1/4" copper refrigerant pipes with 9 mm thick nitrile rubber insulation along with other accessories, wrapping tape etc. on the surface of wall as per direction of EIC

Supply and drawing copper communication & controlling cable of following size-4Core x 2.5 sq.mm copper cable (Make: Finolex / KEI / Polycab / Havells/ RR/Gloster)

Supply & laying PVC Drain Pipe 25 mm dia with necy claming arrangement as per direction of EIC

Note: 1) All the above rates should be quoted inclusive of all taxes, duties and all ancilery charges with cost of maintenance, servicing, supply & replacement of spares for 1 (One) year from the date of commissioning. 2) Total is rounded off to the nearest rupees.

Please Enable Macros to View BoQ information