MAINT AND MISC CIVIL REPAIR WORK AND PERIODICAL SERVICES TO CERTAIN MD AND OTM ACCN AT N AREA UNDER GE CHANDIGARH

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

Taking down Chowkhats or frames not exc. 1.5 sq. m each (without taking off shutters from the frames) complete all as specified.

Taking down Chowkhats or frames exc. 1.5 sq. m but n exc. 4 sq.m each( without taking off shutters from the frames) complete all as specified.

Taking down shutter exc.1 sqm and not exc 2 sqm each complete all as specified and directed.

Taking down shutter n exc.1 sqm and complete all as specified and directed.

M& L for Pressed steel frames of profile size 125mm x 60mm in section fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including one shop coat of red oxide primer including PCC 1:2:4 in backfilling of chowkats complete all as specified and as directed.

M& L for Pressed steel frames of profile size 105mm x 60mm in section fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including one shop coat of red oxide primerPCC 1:2:4 in backfilling of chowkats complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6 ) type C-1 using 20 mm graded crushed stone aggregate as in plinth protection laid in panels finish the top surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for 40mm thick PCC (1:2:4 ) type B-1 using 20 mm graded crushed stone aggregate as in flooring complete all as specified and as directed.

M&L flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides if both face 1mm thick is covered mica with deco rative face complete all as specified and as directed.

Supply and fix 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35 mm 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specifeid and directed.

S& F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm with single side prelam PVC sheet plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

S & F Factory made pvc door shutter 30 mm thick ( style) 10 mm thick panel consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails & bottom rail;on either side & as gap insert for top rail & bottom rail: panelling of plain colour PVC sheet beading and joined together with solvent cement , suplpling & fixing in frame at site as per specifaction and drawing complete all as specified.

M&L for wooden laminated pargo flooring in strips 120cm long and 20 cm wide 6 to 8 mm thick fixed above cushion all as per manufacturers instruction and direction fixed complete all as specified and colour as directed by Engineer -in -Charge.

M&L for Non skid, joint free Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exc 0.18sqm laid as in floors/skirting, set and jointed with cement slurry over & including 15 mm thick bedding layer of cement sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles in any pattern and shade/colour complete all as specified and as directed by Engr-In-charge.

M&L for Non skid, joint free Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11sqm laid as in floors/skirting, set and jointed with cement slurry over & including 15 mm thick bedding layer of cement sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles in any pattern and shade/colour complete all as specified and as directed by Engr-In-charge.

M&L Glazed ceramic digital coloured tiles in vertical surface 300x 200x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match . The tiles shall be laid in pattern with two or more colured tile including rendering 10 mm thick on brickwork or concrete surfaces finished even and fair in CM 1:4.combinations all in any pattern and shade/colour as directed by Engr-In-charge. Make- Somany or equivalent of Kajaria/Johnson

M & L vitrified Ceramic tiles 8 mm to 9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match inlcuding screed bed of 15 mm thick CM 1:6 complete all as specified and directed complete all as specified and in any pattern and shade/colour as complete all as specified directed by Engr-In-charge.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified.

M&L for 20-25 mm thick Machine cut kota stone slab flooring size (600x600 x20 to 25mm thick) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick screed bed in CM 1:6 complete all as specified.

M&L for 20-25 mm thick Machine cut kota stone size (600x600 x20 to 25mm thick) slab as in riser of steps, skirting, dado and pillar laid over 10mm thick rendering in CM 1:4. cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing including complete all as specified.

M&L for 20mm thick granite machine cut stone slab (table rubbed polished) as in cooking platform , jamb, cill, step & riser setted and jointed with cement slurry and bedded over & including cement sand mortar (1:4), & pointed with white/ coloured cement including grinding, rounded and chamfered edges and granite polishing etc complete all as specified and as directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging also fastening and fixing con- forming to Fe.290.Gde-E-165 complete complete all as specified.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates /Grill for windows including joiniting cleat for fixing complate all as specified.

S&F aluminium powder coated glazed shutter (for doors) with style and top rail of section 80x44 mm,16 guage thick and bottom rails of section 112x44 mm of 16 guage thick , middle rail 150x44 mm of 16 guage thick fixed on floor spring, both side openig without sash bars but including 5 mm thick glass pan with 5 micron thick black film and necessary jointing cleats, rubber beading, anodised alumnium snap beading, screws, alumnium anodised handle-02 Nos, aluminium anodised tower bolt 200 mm long-02Nos and locking arragment(mortice lock)-01 Nos in each shutter complete all as specified and directed.

S&F aluminium powder coated glazed windows sliding shutters without glazing bars shutter and glazing shutter with sections of top rail and bottom rail 44x44mm, hanging and meeting style 44x44mm aluminium sheet thickness 16 gauge including 125 mm aluminium handles-01/shutter & Aluminium tower bolts 150 mm-01/each shutter, aluminium hinge and window stey, complete all as specified and directed.

S&F 5 mm thickwith black film sheet glass tinted type,ordinary quality and glazing with oil putty/cleting in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded as per Drg No TD-277R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh complete all as specified and directed.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded as per drawing No TD-276R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh complete all as specified and directed.

S&F steel ventilator (Box type) with top hung shutter including hinges, steel peg towerbolt complete all as specifed and directed.

S&F 18/19 mm MDF board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinets,cupboards etc complete all as specified and as directed.

S&F in repair Continuous (piano) hinges, stainless steel, bright finish or electrogalvanised, width of flaps (when open) 30mm fixed to door complete all as specified and as directed.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F for kitchen cupboard shutter modular hinge (dado hinges), hydraulic medium weight stainless steel, complete all as specified and directed.

S&F in repair aluminium floor door stopper 150mm longe of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specifid and directed.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 200 mm long complete all as specifid and directed.

S&F 150 mm Extruded aluminium alloy handles powder coated, fabricated type.complete all as specified

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F M.S.helical spring including roller & roller plate complete all as specified and directed.

S&F as in repair mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required making good to facings where required and making good, cutting exceeding 20cm girth complete all as specified.

M&L preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of new wooden Surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primercomplete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new onescomplete all as specified and directed by Engr-In-Charge.

S&F 3mm thick Figured glass pin head type, glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm fixed to wdn frame in each pane, complete all as specified and as directed.

S&F 3.00 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples fix complete all as specified and directed.

S&F in repair in repair door closer hydrulicaly, aluminium regulated designation No.1 universal type suitable for door shutter up to 700mm in width and of weight not more than 35 Kg complete all as specified and directed.

S&F in repairs drapery rods (fancy type) 20/25mm in dia with end MS powder coated brackets & funnels fixed with rawl plug and screws, complete all as specified and as directed.

S&F in Hasp and staple 125 mm alluminum anodised complete all as specified and direccted.

S&F in 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, brass polished finished complete all as specified and directed.

Demolition of brickwork brickwork or stone/boulders masonary, built in Cement mortar or cement lime mortar including all quoins,arches,pillers etc but excluding ashlar facing etc complete all as specified.

Brick work with sub class 'B' bricks, class Designation 100 Kgf/cm2 (Approx) straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Brick work with sub class 'B' bricks half brick thick straight or curved on plan to any radius in half brick walls built in CM(1:4) including demolition of existing brick work complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed.

M&L for rendering 20mm thick cement plaster on brick work or concrete surfaces including roof, roof projections and chajjas of buliding at upto 10 mtr height in cement mortar (1:3) including WPC on roof top finished even and smooth without using extra cement all as specified and directed.

M&L for rendering 15 mm thick cement plaster on brick work or concrete surfaces in cement mortar (1:6) finished fair and even upto 12 mtr height all as specified and directed.

M&L for rendering 15 mm thick cement plaster on brick work or concrete surfaces in cement mortar (1:4) finished fair and even upto 12 mtr height all as specified and directed.

M&L for rendering 5 mm thick cement plaster on brick work or concrete surfaces in cement mortar (1:3) finished even and smooth without using extra cement all as specified and directed.

M&L two coats of cement base paint on walls on newly plastered surfaces including prepartion of surfaces, alkali resistant priming coat complete all as specified and directed.

M&L two coats of oil emulsion distemper on newly plastered surfaces of walls including Chalk whitening on plastered surfaces, preaparatory to distempering and including preparing the surface perfectly smooth by using 3 mm wall care putty on complete surfaces complete all as specified .

M&L three coats of white wash on ceiling on newly plastered surfaces including prepraration of surfaces complete all as specified.

M&L for preparation of old treated wooden surface, of any description over 10cm width or girth and applying one coat of synthetic enamel paint (Ist quality) complete all as specified and directed.

M&L for preparation of old steel surface, of any description over 10cm width or girth and applying one coat of synthetic enamel paint (Ist quality) complete all as specified and directed.

M&L for SS plain sheet 1mm thick size (30cmx150cm) fixed to screw in wall writing letters or figures (Block, Roman,italic or indian) exc 4 but n exc 6 letters (on single plate), height of letter not less than 15cm with reflect synthetic enamel paint complete all as specified and directed.

M&L for complete removal of existing tretment applying two coat of white wash on old wall surface including reparation of brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts including cornices etc and complete all as specified.

M&L for applying one coat of white wash on old wall surface including preparation of brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts including cornices etc and complete all as specified.

M&L for applying one coat of white wash on old ceiling surface including preparation of including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts including cornices etc complete all as specified & as directed.

M&L for complete removal of existing tretment and applying two coats of exterior acrylic emulsion paint (Apex ultima) over one coat of primer coat of damp shealth to old plastered wall as per manufacture instrcution including properly filling the cracks with putty and apllied by approved applicator complete all as specified.

M&L for one coat of oil bound distemper (Ist quality) over a coat of primer on old wall surfaces including preparation of wall complete all as specified and as directed.

M&L for complete removal of existing tretment applying two coat of oil bound distemper (Ist quality) over a coat of primer on old wall surfaces prepared by wallcare putty 1mm thick of walls including preparationof wall complete all as specified and as directed.

M&L for complete removal of existing tretment applying wall care putty 1mm thick on wall surfaces & smoothening the surfaces with sand papers etc, (preparatory to OBD/ plastic emulsion/ interior/ exterior emulsion paint as directed) complete all as specified and as directed. Make :- BIRLA,JK,WEBER (SAINT GOBAIN)

M&L for applying two coat of cement base paint on old wall surface for complete removal of existing treatment including preparation of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts cornices etc complete all as specified & as directed.

M&L for applying one coat of cement base paint on old wall surface including preparation of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts cornices etc complete all as specified & as directed.

M&L for repairing the edges of concrete chajjas, facias, columns,balcony area & the like by providing PCC (1:2:4) type B-0 including all necessary form work and/ or provision of rendering 15mm thick (average thickness) in cement mortar (1:3) with chiken wire mesh, after applying a coat of cement slurry @ 3kg/sqm of surface finished even and fair, surface area not exceeding 600 mm wide, in patches including taking down swoolen/damaged plaster or concrete complete all as specified and as directed.

Demolition of RCC of any description and in any position not otherwise specially provided for sunken floor complete all as specified and directed.

M&L RCC, B-1, 1:2:4 20 mm graded aggregate for Slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves ,lintel beam and the like including necessary formwork complete all as specifeid.

M& L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and directed.

Dismantling of walls and ceiling boards/wall paneling or insulation board any thickness, including cover fillets complete all as specified and directed

S&F PVC hallow wall panelling of 5 mm including all necessary fitting frame work etc completed all as specified by Engr-in - Charge

M&L for providing and fixing Gypsum board panel laminated with texture vinyl coated paper tiles of size 595mmx595mmx12mm thick as in ceiling having snap grid 600mmx600mm including GI wall angle of size 24mmx24mmx0.43mm thick along with perimeter of ceiling, fixed to walls/ partition with the help of nylon sleeves at 450mm centre to centre, suspending intermediate Tee section of size 24mmx38mmx0.35mm thick and cross Tee-section 24mmx25mmx0.3mm thick suspended from soffit of ceiling at up to 900 mm centre to centre or adjustable as required at site.4mmdia GI wire hangers fixed/tightened with ceiling with the help of nylon sleeve/rawl plugs complete all fittings complete all as specified and directed

Dismantling wrought iron or mild steelwork of any description not otherwise provided for complete all as specified and directed

S&F Steel tubular section of any size and shape including special shaped washer fixing in any position etc.complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.

M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L 2 mm thick Fibre glass reinforced translucent corrugated sheeting fixed with coach screw and washer in roof, wall etc complete all as specified.

Demolition of concrete of any description and in any position complete all as specified and directed.

S&F factory made prepolished precast cement concrete M-30, vibro compacted chequered tile 25mm thick in required size, shape & colour set jointed and pointed in neat cement sullry with grey cement and pigment over and including 20mm screed bed in CM 1:4 complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and directed.

S&F PVC (SWR) pipe 50mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, fixed to wall or as in spouts complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F for tubes 15 mm, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including in short lengths standard clamps and screws fixed on rawl plugs Complete.

S&F for tubes 20 mm, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including in short lengths standard clamps and screws fixed on rawal plugs Complete.

Fixing only tubes 15mm,`medium grade' galvanised, with all fitting and fixed any grade, to walls and ceilings or laying in floors complete all as specified and directed.

Fixing only tubes 20mm,`medium grade' galvanised, with all fitting and fixed any grade, to walls and ceilings or laying in floors complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on Brick wall complete all as specified

Dismantling water tanks of capacity exc. 250 but n. exc. 500 litres complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20 mm bore dia complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 15 mm bore dia complete all as specified and directed.

S&F PVC connections in repair 15mm size with PTMT nuts of length 450mmcomplete all as specified and directed.

S & F in repair CP stop valves (concealed), cast copper alloy chromium plated fancy type screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed for 15 mm bore complete all as specified and directed.

M&L for ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms/ 25mm-455gms/ 40mm - 690 gms) fixed to 20 mm bore complete all as specified and directed.

S&F in repair Chromium plated brass 2 in 1 health faucet with hook 1mtr tube complete all as specified and directed.

S&F in repairs water closet single piece of size 750x360x650 with flushing cistern including connection to drain (out going pipe) and to flushing pipe anti syphonage pipe etc seat cover and all joints, connection pipe, P or S trap including making good to the floor complete all as specified and as directed.

M&L in repairs Vitreous china oval shape wash hand basin white size 550x400mm to be fitted including 32 mm dia CP waste coupling and 60cm waste pipe complete all as specified.

Disconnecting existing tanks exc 250 ltr and n exc 500 ltrs in capacity for cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc and reconnecting and re-fixing in position complete all as specified and as directed.

Disconnecting existing tanks exc 500 ltr and n exc 1000 ltrs in capacity for cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc and reconnecting and re-fixing in position complete all as specified and as directed.

S &F in repair chromium plated fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore pipe complete all as specified and directed.

S&F 15 mm bore Pillar taps fixed in repair cast copper alloy, fancy type with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F for CP Stop valves/angle valves, cast copper alloy chromium plated fancy type screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed for 15 mm bore as in repair complete all as specified and directed.

S&F for Sink with drainage board made of stainless steel of wall thickness 1mm thick for kitchen or laboratory with plug, washers and wastes, including bedding in cement sand mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe overall size 915mm x460mm bowl size 410mm x 330mm x 160mm as in repair complete all as specified and as directed.

Supply & fix in repairs stainless steel kitchen plate rack made out of 1mm thick stainless steel of size 900x900x300mm with shelves and plate partition of pattern as approved by engineer-in-charge, fixed to wall by means of four nos rawal plugs complete all as specified and as directed.

Supply & fix in repairs wash hand basin vitreous china coloured, flat back, size 550 x 400 mm with a set of CI brackets, brass chromium plated waste fittings and PVC waste pipe 32 mm bore, including chinaware pedestal for waste pipe, connection to water tubing, PVC connection 15mm dia with brass check nuts complete all as specified.

Supply & fix in repairs squatting pan WC Orissa pattern size 580mm x 440mm white with integral foot rest (excluding flushing cistern) with P or S trap including provision of lime concrete bedding including breaking up existing damaged WC seat and connecting flush pipe etc making good to match with existing surfaces complete all as specified and directed.

Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including mild steel chromium plated jet fixed to water closet with 360mm wide x 390mm high and 415 to 445mm long flexible pipe complete all as specified and directed.

S&F in repair 10 Ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including bracketsPVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets fixed in repair complete all as specified.

Supply & fix in repairs CP shower rose brass chromium plated square type of size 125mm with or without swivel joints including fixing to steel pipe or union of 15mm bore complete all as specified and directed

S&F in repairs PVC waste pipe 32 mm bore all as specified

Dismantling of cast iron/ reinforced concrete/PVC drain pipes, 100/75/50mm, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to wall 100 mm bore complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L for providing, cement concrete PCC 1:2:4 type B-1 (using 20mm graded aggregate) in dabing in celing/lintel/wall/roof kerbs, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc, complete all as specified and as directed.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed.

S&F in repairs steel grating 100mm dia complete all as specified and directed.

S&F in repairs salt glazed stoneware gully traps, 150x150mm square or round mouthed, type P complete all as specified.

S&F PVC (SWR) pipe 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall, as in repair complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall, as in repair complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends with/without door access any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends with/without door access any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110 mm bore PVC (SWR) 'P’ trap complete all as specified and directed.

Supply and fix 25mm thick flush shutters, solid core construction, with block board core and plywood face one face is covered with decorative face veneer with lippling/frame to match including cupboard partitions/shelves etc complete all as specified and directed.

M&L taking out roots of trees penetrated through valves/concrete surfaces etc upto a depth of 600mm by chieseling , demolition of brick work , concrete work and pouring concentrated acids/Dr fixit chemicals upto the depth of roots and making good the disturbed portion complet all as specified and directed.

Material & labour for 25mm thick PCC (1:2:4) type BO (using 12.5 mm graded stone aggregate), as in leveling concrete in floor finished even & rough to receive top floor layer/finish complete all as specified & directed.

M&L for complete removal of existing tretment and applying one coat of exterior acrylic emulsion paint (Apex ultima) over one coat of primer coat of damp shealth to old plastered wall as per manufacture instrcution including properly filling the cracks with putty and apllied by approved applicator complete all as specified.

chahalbuilders

JOGINDER NATH GUPTA AND SONS