Carrying out the work of Conversion of 11KV DC Feeder overhead line to 11KV HT UG Cable System in M.C Road Section, Mandya City Sub-division, Mandya Division

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

The Bidder should have successfully completed as prime contractor, at least one similar work which includes HT UG cable work on TTK basis of value not less than 50% of the amount put to tender in any one of the previous five financial years (FY 2020-21, 2021-2022, 2022-23, 2023-24 & 2024-25) or till date in any ESCOMs of Karnataka. Note: The value of the completed works shall be given a weight of 10% per year to bring them to the price level of the FY in which the tenders are invited. The Work completion certificate issued by an officer not below the rank of Executive Engineer of the concerned ESCOMs of Karnataka is to be uploaded.

Bid capacity: Bidder who meets the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (A x N x 1.5-B),A- Maximum value of works executed in any one year during the last five years (updated to FY 2024-25 price level), taking into account the completed as well as works in progress.N-Number of years prescribed for completion of the works for which tenders are invited. B-Value, at FY 2024-25 price level, of existing commitments and on-going works to be completed during the proposed contract period. The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent or Charted Accountant.

The Tenderer in its name should have a minimum financial turnover not less than the value of amount put to tender, in any one of the previous five years i.e. (FY 2020-21, 2021-2022, 2022-23,2023-24 and 2024-25.Note: Updated to the FY in which the tenders are invited. Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the FY in which the tenders are invited. Audited annual accounts statements such as P&L statement, Balance sheets for the said financial years to be uploaded.

The liquid assets and /or availability of credit facilities of not less than 25% of the amount put to tender. The cash at Bank, Term Deposits and the availability of fund based credit facility shall be supported by a certificate issued by any Nationalized/Scheduled Bank with whom the bidder is having banking facilities. In case of Fund based credit facility, the certificate issued by the Nationalized/Scheduled Bank duly mentioning sanctioned limits, funds utilized so far and balance available after the date of notification of this tender or at a later date, before submission of the bid is to be uploaded.If the bidder has banking with more than one Bank, then the available liquid assets balance mentioned above on a particular date i.e., after the date of notification of this tender or any date before submission of bids shall be the same date for all the banks.

The bidder should not have been Blacklisted or declared as a Defaulter by any Government Department/PSU/ESCOMS in Karnataka or in any other state. Self-declaration in this regard on Rs.500 Stamp Paper

Bidder shall possess a valid Class-I/Super Grade Electrical Contractor License issued by Government Electrical Inspectorate Authority or competent authority of GOI and should be eligible to take up electrical line works in Karnataka Originals scanned Class-I/Super Grade Electrical License

The Bidder should have executed minimum quantity of2.90 kms HT UG Cable works in any ESCOMs of Karnataka on TTK basis (work executed during FY 2020-21, 2021-2022, 2022-23, 2023-24 & 2024-25) or till date. Detailed Work award and corresponding work done certificate copies issued by an officer not below the rank of Executive Engineer of the concerned ESCOMs of Karnataka is to be uploaded.

The Bidder shall source the Ring Main Units (RMU) from the manufacturers who meet the following requirementsA-The Manufacturer should have RMU manufacturing unit in India. B-The Manufacturer should have a valid vendor approval for the supply of 11KV SF6 Gas Insulated RMU (DAS & Non-DAS) in any ESCOMs of Karnataka. C-The Manufacturer should have supplied tendered quantity of DAS compatible 5-way RMU in last three years to any ESCOMs of Karnataka.D-The Manufacturer shall comply with the technical specifications required in the bid documents.A-Self-declaration in letter head for having manufacturing unit in India.B-Vendor Approval copy issued by ESCOMs in KarnatakaC-Order completion certificate issued by ESCOMs not below the rank of executive engineer.D-Valid type test certificates issued by CPRI/ERDA/any International STL Member Laboratory as per IEC 62271-200 (All Type Tests reports as mentioned to be uploaded). The RMU manufacturer shall meet this technical specification requirement.E-The Bidder shall also provide Manufacturer Authorization Form (MAF) from the RMU Manufacturer (OEM) as per MAF Annexure along with the documentary evidences as specified above. MAF shall be on Rs.500 e-stamp paper with undertaking from the OEM to supply the material and its guarantee for the subject tender. Relevant documents such as Power of Attorney of the authorized signatory, Board Resolution, of the RMU manufacturers, OEMs, should be enclosed

Bidder shall possess valid EPF, ESI, GST registration, Labour License, and PAN Card.Registered documents