Repair and Renovation of D-Type Old Office Building Block into Residential Quarters and Old RD Office into Guest House at CMPDI RI-IV Complex , Kasturba Nagar, Jaripatka, Nagpur.

Amount

SCHEDULED ITEMS -PART A

SCHEDULED ITEMS -PART B

UNSCHEDULED ITEMS CIVIL WORKS -PART C

Brick work with Flyash locally available cement bricks in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand)

Providing half brick masonry with Flyash locally available cement bricks in superstructure above plinth level up to floor five level in cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and Fixing table top bowl type ceramic wash Basin of size 410x365x185 mm of Parryware make or equivalent including 32mm dia. brass waste etc. Complete as per the instructions of EIC.

Providing and fixing of mirror of superior glass bevelled edge 6mm thick (of approved quality) and of required shape and size with glass holding brackets in required size and as per instruction of EIC.

Providing and fixing PVC 150mm dia Pipe for air ducting with necessary supporting clamp , anchoor bolt etc. for hanging in ceiling and necessary fittings such as tee, bend, pvc flexiable connection complete as per instruction of EIC

Providing and fixing aluminium ventilator louvers with one set of aluminium louvers levers etc. including glazing and all fittings etc. With froasted glass panes of 4.0mm thickness (cost of alumium frame work and glass will be paid separately) complete as per the directions of engineer-in-charge .

Providing & fixing fly proof powder coated aluminum wire gauze to windows, clerestory windows & doors with alumium bedding pipe/flat including all accessories and fittings complete (cost of alumium bedding pipe/flat will paid separately) - powder coated aluminum wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides as per direction of EIC

Providing & fixing fibre mesh fly proof net gauze of minimum 120 GSM and 1.4 mm aperture on both sides (saint gobain or equivalent brand) by hook and loop (Velcro)of 25 mm width by stitching . Zipping for operating window and fixing on aluminium frame to windows, clerestory windows including all accessories and fittings and fixing complete (cost of alumium bedding pipe/flat will paid separately) as per direction of EIC

Providing and fixing Chromium plated heavy duty Towel rail 60cm long of approved make with fittings arrangement complete as per instruction of EIC

Providing and fixing Chromium plated heavy duty Towel ring of approved make with fittings arrangement complete as per instruction of EIC

Providing and fixing etched polished 5 mm thick glass panes (Make of Saint Gobain or Equivalent ) in required size and approved design by EIC for panelled and glazed wooden shutters for doors, windows with wooden fillets all complete as per direction of Engineer-in-charge. (for payment clear glass size will be measured)

Finishing walls with textured interior paint in approved pattern .first appling acrylic wall putty to minimize undulation and over the putty applying Interior Wall Primer (ST) / Trucare Interior Wall Primer (WT) with brush and after it appling two coats of Royale Luxury Emulsion as a base coat with roller and create pattern using 1 coat of Royale Play Special Effects Paint as a top coat. Deposit the topcoat material using application roller followed by quick required pattern creation using brush complete as per direction of EIC

Removing synthetic enamel paint from existing wooden panelled and glazed shutters and frame of doors & windows by using a hot air gun and chemical solvent paint strippers or any other suitable materials or by scrapping and sand papering and preparing the surface smooth and painting with melamine paint . (Melamine painting cost will be paid separately) complete. (Complete doors & windows area with frame will be measured for payment ,both faces separatly)

Providing and fixing Swan neck C.P Brass tap of Jaguar or equivalent etc complete as per the instruction of EIC.

Repairing of existing wooden panelled and glazed shutters and frame of doors & windows by easy adjusting as required and as per instruction of EIC

Providing and fixing brass Eye piece/ Door Eye Viewer;Viewing Angle : 180 Degree Mounting Diameter : 14 mm for all type of doors (as approved by engineer in-charge) with necessary screws / fixing accessories. Rate including all material, all labour charges,all lead, lift, transportation, taxes etc complete.

Providing and fixing SS 304 Stainless steel kicking sheet of 0.3mm thick in required size ,on doors with necessary screws/ nails etc. complete as per instruction of EIC.

Providing and fixing ISI marked Stainless steel handles with screws etc. complete : 125 mm

Providing and fixing approved Designer Antique Finish Pair (M) Brass Door Handle of Width 6 cm and Height 150 mm and Weight not less then 650 gm complete with fittings all inclusive as per direction of Engineer-in-Charge

Providing and fixing Heavy Duty Stainless Steel Glass to Glass Door Lock with 3 keys and Stainless Steel H Type Glass Door Handle, Pipe Pull Handle for Glass Door, Pack of 1 Set (12" inch) with gasket , supporting washers, grub screws all inclusive as per direction of Engineer-in-Charge

Providing and laying Italian marble finish double charge Vitrified tiles in wall of sizes 600mm x 1200mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, and design in all colours & shade over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.

Providing and fixing vertical blinds 100mm Louver width, quality of approved make fabric of 100% polyester woven fabric thickness 0.400mm with acrylic coating resistance to cracking and fraying and traded for dust repellency, UV proof virtually maintenance free having plastic bottom chain thickness of chain .05mm and diameter 3mm, plastic with suitable metal bottom weight including coating on exterior surface , including all fixtures and fittings complete in all respect as per design /colour/shade including requisite installation brackets etc. as required for installation at site with anchoring arrangements complete as directed of EIC. .(Approved make -Vista/Mac-Decor/Hunter Douglas or equivalent .

Providing and grouting the holes by Poly Ceramic Cementitious i.e NicGroutG06+53 grade cement material of as per requirement to reduce the porosity of concrete / Masonry structure and to increase the strength of structure using grouting pipes, grouting m/c, mixer etc and all relevant safety with all leads and lifts, material, machinery, labour, etc. Complete as per specification and as directed by Engineer-in-Charge.

Providing and fixing 100 mm dia chromium plated brass shower rose to 15 mm dia. Supply pipe including necessary shower arm, bend and socket complete as per instruction of EIC.

Providing and fixing C.P. Two way BIB cock (Jaquar ARI-CHR 39041) or equivalent of approved make continental including necessary sockets/union nut etc. complete.

Providing and preparing kitchen otta up to 75cm width, madeup from 30mm thick and 75cm high vertical support for kadppaa t 1m.c/c of 25mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20x50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete.

Providing and fixing C.P. wall mixer with provision for over head shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc.complete. ( jaquar make continental (Cat.No. CON-CHR-273KNUPR)

Providing and fixing Hand shower (health faucet) with 8mm dia.1m long flexible tube having wall hook with approved make including necessary sockets/union nut etc. complete as directed by Engineer incharge. jaquar make (Cat. No. ALD-CHR-563 )

Providing and fixing 10 cm PVC nahani trap with grating etc. complete.

Providing and fixing 110 mm Soil Pipe 6 Kg/cm2 Pressure stabiliser pipe/P.V.C.soilvent /waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc.complete.

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc.complete As directed by Engineer in charge

UNSCHEDULED ITEMS ELECTRICAL WORKS -PART D

Supplying and erecting LED square / circular Max. 7 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrenediffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrenediffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting integrated LED street light fitting 26 to 30W IP65 & IK08 class having single piece pressure die-cast aluminium housing , having system lumens output of Min. 2600 Lumens, min. efficacy of 100 lumen/W,CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting Street light bracket made from 40 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.

Supplying and erecting storage type water heater 15 litres capacity having standing loss <0.419kWh/24hour/45°C, high impact resistance engineering plastic body with anti corrosive high grade steel inner tank, heating element having hard water & corrosion protection, with minimum 3 safety protections (i.e. thermostat & thermal function cut-out, valve) with total pressure 8 bar withstanding capacity duly tested and marking sr. no. and date of erection complete. specification no. AP-WH/STWH

Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)

Supplying and erecting bracket fan 400 mm. sweep A. C. 230 volts 50 cycles 1350 RPM. Oscillating type, plastic or metal blades chrome plated guard with speed regulator and moisture proof treatment to winding and with ‘E’ class insulation.

Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF

Supplying and erecting expanded metal jali enclosure made from GI square mesh 15 SWG having 20/25 mm squares, properly fixed/welded and duly painted with one coat of red oxide and two coats of silver/enamel paint complete. (size of jali or enclosure to be specified in the estimate.) NOTE: ) Quantity of iron/sheet metal work shall be considered and worked out as per steel data table.

Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface Of panel / cupboard

Supplying and erecting plywood 12 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete.

Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 200A having 25mm (Width) X 5 mm (Thickness) , with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A per sq. mm. compliance to IS 5082 and Enclosure fabricated with 16 SWG CRCAsheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification no. CP -BB

Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material,wiring & connections etc.

Making the site clear of dismantled DB and switchgears by refilling the holes with cement mortar & finishing in an approved manner.

Dismantling the existing switchgears, DB, and bus bar of any size complete with/ without board or angle iron frame

Dismantling the existing aluminium/copper mains, sub-mains wiring upto 10 sq.mm. along with accessories etc. complete as per specification No: WG-DM/PW

Dismantling the existing Telephone / LAN / WAN / TV cables and wires of all sizes along with casing-capping / conduit complete as per specification No: WG-DM/PW

Supplying & erecting crimping type aluminium lugs for cable 35 sq mm complete as per specification No. CB-CL/AL

Supplying & erecting crimping type aluminium lugs for cable up to 16 sq mm complete as per specification No. CB-CL/AL

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

Supplying and erecting LED Strip light 5m Length Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f.>0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50,including driver with 1 year warranty.

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 limen/W,CRI>80,CCT up to 6500K, Beam Angle of 120 deg., THD<10%, p.f. >95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50000 Hrs at L70B50, including driver, IP66, IK09 rated on provided PVC Block/wooden board with 3 years warranty.

Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90,operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2.

Supplying & erecting integral post top lantern fixtures (mushroom type) suitable for LED lamp upto 12 W consisting of clear acrylic top cover, cast aluminium pole cap complete with accessories on provided pole /bracket as per specification no. FG-ODF/PTL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and erecting static energy meter with 240V 50 Hz. AC supply 5 to 30 A, ISI mark, accuracy class 1.0 with backlit LCD display, (measuring and display kWh, kVAh, V,I,PF, frequency, kW, kVA, six months history of Energy & MD in kW & kVA) with transparent hinge type box complete erected on polished teak wood board duly wired with required size of weather proof PVC wires duly tested by electric supply company

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f.>0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

Total impact of GST for the purpose of CTC

M/s Prime Constructions

Works Contract