Construction of Rain water pipes and tank in Type-III quarters at Block A to H (238) at Kasumpti Shimla

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 (fifty)metres lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Nominal concrete 1:3:6(One cement :three sand: six graded stone aggregte) (one or richer mix (i/c equivalent design mix).

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 (fifty)metres lead as per direction of Engineer - in- charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 (fifty)metres lead as per direction of Engineer - in - charge. (i) Nominal concrete 1:3:6(One :three:six) or richer mix (i/c equivalent design mix)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)For thickness of tiles 10 mm to 25 mm (ten milimetre to twenty five milimetre)

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within all lead including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i) CGI Sheet

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm(eight milimetre) diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i) 0.63 mm(zero point six three milimetre) thick with zinc coating not less than 275 gm/ m²

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) In Trusses and trussed work in purlins

Providing ridges or hips of width 60 cm (sixty centimetre)overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm(eight milimetre) dia G.I. limpet and bitumen washers complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i) 0.63 mm(zero point six three milimetre) thick with zinc coating not less than 275 gm/m²

Providing valleys of 90cm (ninety centimetre)wide over all in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm(eight milimetre) dia G.I. limpet and bitumen washers complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing flushing 38cm.(thirty eight centimetre) overall in plain G.I. sheet fixed with galvanised iron. J or L hooks, bolts and nuts, G.I. limpet washer and bitumen washers complete bent to shape and fixed in walls with cement mortar 1:3 (One cement : three sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. ( i)0.63mm(zero point six three milimetre) thick sheet.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm(One point six six milimetre to two milimetre) thick in eaves board. Facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid separately) including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 15cm wide,45cm (forty five centimetre) overall semi circular plain G.S. sheet gutter with iron brackets 40x3mm (forty into three milimetre) size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.

Centering and shuttering including strutting, propping etc. and removal of form for (i)Suspended floors, roofs, landings, balconies and access platform including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)1:3:6 (one cement : three coarse sand) : six graded stone aggregate 20 mm (twenty milimetre) nominal size)

(ii) 1:2:4 (One cement:two coarse sand:four graded stone aggregate 20mm(twenty milimetre) nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Mild steel and Medium Tensile steel bars.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm(three hundred into three hundred milimetre) or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty milimetre)thick cement mortar 1:4 (one Cement: four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Tile work in skirting, risers of steps and dado up to 2 m (two metre) height over 12 mm(twelve milimetre) thick bed of cement mortar 1:3 (One cement :three coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (i) 8mm(eight milimetre) thick

Providing and fixing 10mm thick antiskid water proof stain and impact resistant heavy duty vetrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1cement:3sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Steel work welded in built up sections, trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) In gratings , framed guard bars, ladders, railing, brackets and similar works.

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement :one sand) (Seat and over to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)Ordinary closet

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. 1 SOLID TYPE (a) White plastic seat and cover.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 10(ten) litre capacity - White

Providing and fixing telephonic Jet including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 100 mm (One hundred milimetre) sand cast Iron grating for gully trap including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and Fixing C.P. Brass Towel ring complete with C.P. Brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 600mm(six hundred milimetre) long towel rail with total length of 645mm(six hundred forty five milimetre),width 78mm (seventy eight milimetre)and effective height of 88mm (eighty eight milimetre)weighing not less than 190 gms (One hundred ninety grams).

Providing and fixing PTMT towel ring trapezoidal shape 215 mm (two hundred fifteen milimetre) long, 200 mm(two hundred miliemtre) wide with minimum distances of 37 mm (thirty seven milimetre)from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 600x450mm (six hundred into four hundred fifty milimetre)beveled edge mirror of superior glass(of approved quality) complete with 6mm (six milimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. Make Seiko or Equivalent

Providing and fixing C.P. Brass bib cock of approved quality conforming to IS: 8931 including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15mm(fifteen milimetre) nominal bore.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15mm(fifteen milimetre) nominal bore with 45cm length.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i) Flexible pipe (a) 32mm(thrity two milimetre) dia

Providing and fixing 600x120x5mm (six hundred into one hundred twenty into five milimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm(forty milimetre) long screws, rawl plugs etc. complete including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.(i)15mm(fifteen milimetre) nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i)15 mm(fifteen milimetre) dia nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i)15 mm (fifteen milimetre) nominal bore

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (a)110 mm (one hundered ten milimetre) dia.

b) 90mm (Ninety milimetre) dia

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (a) 110mm( one hundered ten milimetre) dia

(b) 90mm (Ninety milimetre)dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a)110 mm ( one hundered ten milimetre) dia

b) 90mm (Ninety milimetre)dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 110 mm( one hundered ten milimetre) dia.

(b) 90 mm(Ninety milimetre) dia.

Providing and fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. ( i) 110x90 mm(One hundred ten into ninety milimetre) dia

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 110 mm X 90 mm (One hundred ten milimetre into ninety milimetre)

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a)110 mm( one hundered ten milimetre) dia.

(b) 90 mm (Ninety milimetre) dia.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm (three milimetre)thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 110 mm(One hundred ten milimetre) Dia.

(b) 90 mm(Ninety milimetre) dia.

Providing and fixing 15mm (fifteen milimetre) mixer for kitchen sink with top/bottom swinging spout including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing one hole basin mixing Faucet including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing wall mixing including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Marble work (table rubbed and polished for walls lining) Veneer work 2.50cm.(two point five zero centimetre) thick in cement mortar 1:3 (one cement:three sand) including pointing with white cement mortar 1:2 (one white cement: two marble dust) with an admixture of pigment to match the marble shade including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)Baroda Green Marble .

Providing and nosing of marble edges in marble work including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a ) Flat back (i) 550mmx400mm (Five hundered fifty milimetre into four hundred milimetre).

Providing and fixing 32mm (thirty two milimetre) dia C.P. brass waste basin or sink complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm(forty milimetre), including painting of fittings and brackets, cutting and making good the walls wherever required (i)Kitchen sink with drain board(a)510x1040 mm(five hundred ten into one thousand forty milimetre) bowl depth 250mm(two hundred fifty milimetre).

Providing and fixing C.P. Bras pillar tap with capstan head including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15mm(fifteen milimetre) dia MAKE SEIKO OR EQUIVALENT

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 40mm (forty milimetre)thick (a) 2nd class deodar wood

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm(zero point five six milimetre) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 40mm (forty milimetre)thick(a) 2nd class deodar wood

Providing and fixing aluminum tower bolts(barrel type)anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.(a) 150x10mm (One hundred fifty into ten milimetre).

(b) 200x10mm (two hundred into ten milimetre)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 125mm (One hundred twenty five milimetre).

Providing and fixing bright finished brass hard drawn hooks and eyes including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(a) 200mm (two hundred milimetre)

Providing and fixing 19mm(Nineteen milimetre) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 19mm(Nineteen milimetre) thick commercial board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing bright finished brass ball catcher 10 mm(ten milimetre) dia including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing bright finished brass handles with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 100mm (one hundred milimetre).

Providing and fixing square edges cover fillets (beading) 19mmx6mm (Nineteen milimetre into six milimetre)section i/c mitring at junctions with wood screws and nails complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a)1st class Indian teak wood

Providing and fixing ply wood lining with but jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 6mm (six milimetre) thick.

Providing and fixing 1.00mm (One point zer milimetre)thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Old work (one or more coats)

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and applying white cement based putty of average thickness 1mm(One milimetre), of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) One or more coats on old work.

Applying priming coat over new wood and wood based surfaces after and i/c preparing the surface by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (a)Ready mixed paint brushing wood primer pink.

Painting two coats (excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping. (a) With white enamel paint.

Providing wood work in frames of doors,windows, clerestory,windows and other frames wrought,framed and fixed in position including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i) 2nd class deodar wood

Providing and fixing panelled glazed or panelled and glazed shutter for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)40mm (forty milimetre)thick (a)2nd class deodar wood.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm(zero point five six milimetre) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws.(i)40mm (forty milimetre) thick (a)2nd class deodar wood.

Repairs to plaster in patches of 2.50 Sq.M (two point five zero square metre). and under and 10 to 15mm(ten to fifteen milimetre) thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a Lead of 20(twenty) metres with including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a)Cement Mortar 1:5 (one Cement : five Sand)

Dubbing out an old irregular walls average 10mm(ten milimetre) thick with including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i)Cement mortar 1:5 (One Cement : five Sand).

Providing and fixing chicken mesh in wall surface including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred milimetre)size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i)With common burnt clay F.P.S.(non modular)bricks of class designation 7.5.

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. (i)Orissa pattern W.C Pan of size 580x440 mm(five hundred eighty into four hundred forty milimetre).

Providing and fixing 1.5mm(one point five milimetre) thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately). MAKE LG.