REPAIRS / MAINT MISC TYPE ITEMS OF FURNITURE OF OTM ACCN BSO (SOUTH) SEUNDERABAD UNDER GE (SOUTH) SECUNDERABAD

Amount

Note :- 1. Removal of Existing componants of following MES Pattern Furniture Item's Carefully without disturbing the adjoining Parts and S&F new componants of same pattern as per Drg in lieu of Dismantled /Discorded componants including Tighting the Joints, Pinning , Screwing, wedging, Gluing, Providing Hinges, Placing every part in- tact condition. 2. Cleaning,Derusting of Stain/Dirt, old Paint/Polish with Grinder machine or Sand Paper as required and as directed making the Surface smooth filling the holes with putty where ever required and Applying two coats of Syenthetic Enamel Paints over a coat of Red oxide primer with spray machine on steel item's and two coat of French Polish on wooden Item's over a coat of Wood Primer. 3. Replaced/ Changed parts should be First finished seperately upto the level /extent so that the Polishing/ Painting on whole Items should be matched with the remaining item's and desired finish shall be obtained. 4. The Furniture Article received from occupants/users units subsequently issue for necessary repair/maints and Painting /Polishing to the contractor through nominal issue voucher (NIV) mentioning the date of issue duly signed by the contractor. The contractor shall return these furniture articles after completion of necessary repair work on or before 30 days from the date of issue and nominal receipt voucher (NRV) shall be prepared dully signed by furniture I/C, Engineer-in-Charge and contractor. 5. Generally the periodicity for issue of furniture from BSO yard shall be once or twice in a month (reckoning from date of commencement of work as per W.O No 1 ) subjected to the users requirement /availability of furniture for repair works. However repairable furniture shall be issued not more than 20 % of total qty of CA provision in one month. 6. Work will be executed where the Furniture Item's exist in different user unit's of BSO GE ( South) Secunderabad including Furniture yard of BSO South Sub Division.

Table office Clerk Steel Drawing No :- FD-84(M), 381, 307, 1004 Dismantling of old unsv top of table & S&F new table top of 18 mm thick prelaminated MDF Board exterior grade (Make:- Action Tesa /Century /Greenply) all around sides covered with PVC Edge Band Tape 1.6 to 2.0 mm thick with strong bonded chemical adhesive through hot pressed machine and suitable size stainless steel wooden screw for fixing of Top as specified and as directed.

Dismantling of old unsv Legs and S&F new Legs of mild steel square tube 25 mm as per existing shape and size.

Dismantling of old unsv stiffner and S&F new stiffner of mild steel square tube 25 mm as per existing shape and size.

Dismantling of old unsv Lock of Drawer and S&F new Lock Make:-Godrej/Harrisson/Link or any others make as approved by engineer- in-charge as per Drg.

Dismantling of old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes/ Toes as per Drg.

Table office officer steel Drawing No FD- 84(M), 306 1002, 1003 :- Dismantling of old unsv top of table & S&F new table top of 18 mm thick prelaminated MDF Board exterior grade (Make:- Action Tesa /Century /Greenply) all around sides covered with PVC Edge Band Tape 1.6 to 2.0 mm thick with strong bonded chemical adhesive through hot pressed machine and suitable size stainless steel wooden screw for fixing of Top as specified and as directed.

Dismantling of old unsv Legs and S&F new Legs of mild steel square tube 25 mm as per existing shape and size.

Dismantling of old unsv stiffner and S&F new stiffner of mild steel square tube 25 mm as per existing shape and size.

Dismantling of old unsv Lock of Drawer and S&F new Lock Make:-Godrej/Harrisson/Link or any others make as approved by engineer- in-charge as per Drg.

Dismantling of old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes/ Toes as per Drg.

Table 3'x2' with Drawer Steel Drawing No :- FD-1008 Dismantling of old unsv top of table & S&F new table top of 18 mm thick prelaminated MDF Board exterior grade (Make:- Action Tesa /Century /Greenply) all around sides covered with PVC Edge Band Tape 1.6 to 2.0 mm thick with strong bonded chemical adhesive through hot pressed machine and suitable size stainless steel wooden screw for fixing of Top as specified and as directed.

Dismantling of old unsv Legs and S&F new Legs of mild steel square tube 25 mm as per existing shape and size.

Dismantling of old unsv stiffner and S&F new stiffner of mild steel square tube 25 mm as per existing shape and size.

Dismantling of old unsv Lock of Drawer and S&F new Lock Make:-Godrej/Harrisson/Link or any others make as approved by engineer- in-charge as per Drg.

Dismantling of old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes/ Toes as per Drg.

Table 3'x2' with out Drawer Steel Drawing No :- FD-1007 Dismantling of old unsv top of table & S&F new table top of 18 mm thick prelaminated MDF Board exterior grade (Make:- Action Tesa /Century /Greenply) all around sides covered with PVC Edge Band Tape 1.6 to 2.0 mm thick with strong bonded chemical adhesive through hot pressed machine and suitable size stainless steel wooden screw for fixing of Top as specified and as directed.

Dismantling of old unsv Legs and S&F new Legs of mild steel square tube 25 mm as per existing shape and size.

Dismantling of old unsv stiffner and S&F new stiffner of mild steel square tube 25 mm as per existing shape and size.

Dismantling of old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes/ Toes as per Drg.

Table 3'x3' Steel Drawing No :- FD-1009 Dismantling of old unsv top of table & S&F new table top of 18 mm thick prelaminated MDF Board exterior grade (Make:- Action Tesa /Century /Greenply) all around sides covered with PVC Edge Band Tape 1.6 to 2.0 mm thick with strong bonded chemical adhesive through hot pressed machine and suitable size stainless steel wooden screw for fixing of Top as specified and as directed.

Dismantling of old unsv Legs and S&F new Legs of mild steel square tube 25 mm as per existing shape and size.

Dismantling of old unsv stiffner and S&F new stiffner of mild steel square tube 25 mm as per existing shape and size.

Dismantling of old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes/ Toes as per Drg.

Table OR's Aluminium Top Drawing No:- FD-165(M) Dismantling of old unsv top of table & S&F new table top of 18 mm thick prelaminated MDF Board exterior grade (Make:- Action Tesa /Century /Greenply) all around sides covered with PVC Edge Band Tape 1.6 to 2.0 mm thick with strong bonded chemical adhesive through hot pressed machine and suitable size stainless steel wooden screw for fixing of Top as specified and as directed.

Dismantling of old unsv Legs and S&F new Legs of mild steel square tube 25 mm as per existing shape and size.

Dismantling of old unsv stiffner and S&F new stiffner of mild steel square tube 25 mm as per existing shape and size.

Dismantling of old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes/ Toes as per Drg.

Chair Computer Drawing No :- FD/E6/MAP/01 & Trade Pattern. Dismantling of old unsv Tapestry Cloth from seat of chair and S&F new Tapestry Cloth of seat with new PVC Lipping all around it complete all as specified and directed. (Note:- Rate of Tapestry cloth should be not less than 150/- per meter.)

All as per Ser No 28 above, but Back of Chair as per Drawing.

Dismantling of old unsv Handle and S&F New Black PU Handle all as specified in drawing and directed .

Dismantling of old unsv PU Cushion foam of seat and S&F New PU Cushion Foam of seat all as specified in drawing and directed .

Dismantling of old unsv PU Cushion foam of back and S&F New PU Cushion Foam of back all as specified in drawing and directed .

Dismantling of old unserviceable Hydraulic System of Chair and S&F of New Hydraulic System all as specified and directed.

Dismantling of old unsv Base of Chair and S&F new Base made of Nylon Material with castor wheel 50 mm for stability and easy movement all as specified and directed.

Dismantling of old unsv castor wheel and S&F new Castor wheel all as specified and directed.

Locker Bed Side Steel ( Built-in) Drawing No:- FD-1029. Dismantling of old unsv Handle and S&F New Handle 100 mm long Chrom Plated Stainless Steel including Nut and Bolt with Washer complete as per existing shape and size as per Drg.

Dismantling of old unsv Butt Hinges and S&F New Butt Hinges complete as per existing shape and size as per Drg.

Dismantling of old unsv Hasp and Staple and S&F New Hasp and Staple complete as per existing shape and size as per Drg.

Dismantling of old unsv Hanging Rod of and S&F New Hanging Rod complete as per existing shape and size as per Drg.

Dismantling of old unsv Rusted of Legs of All Types of Locker and S&F New Legs dully Painted complete as per existing shape and size as per Drg.

Dismantling of old unsv /Rusted Shelves of Locker Bed side steel and S&F New Shelves dully Painted complete as per existing shape and size as per Drg.

Table Steel with one drawer laminated Top size 1010 mm x 650 mm x 760 mm Drawing No :- TP Dismantling of old unsv top of table & S&F new table top of 18 mm thick prelaminated MDF Board exterior grade (Make:- Action Tesa /Century /Greenply) all around sides covered with PVC Edge Band Tape 1.6 to 2.0 mm thick with strong bonded chemical adhesive through hot pressed machine and suitable size stainless steel wooden screw for fixing of Top as specified and as directed.

Dismantling of old unsv Legs and S&F new Legs of mild steel square tube 25 mm as per existing shape and size.

Dismantling of old unsv stiffner and S&F new stiffner of mild steel square tube 25 mm as per existing shape and size.

Dismantling of old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes/ Toes as per Drg.

Charpoy Hard Top Drawing No:- FD/MAP-II/01 Dismantling of old unsv Ply top from Hard Bed and S&F new 12 mm thick plywood of suitable size, ISI marked,(Make:-Greenply/Archid ply/Century/Kitply) BWR Grade phenol bonded commercial plywood with suitable size nut and bolts all as shown on drawing and as directed.

Removing of old unsv MS plate from legs of charpoy and S&F of New Plates of size 32mm x 32mm x 5mm at bottom of legs and under which 3 mm thick rubber Sheet fixed with Adhesive.

Charpoy Folding IP with Nylon Newar and Ply top Drawing No FD-388 , FD-388 ( R). Dismantling of old unsv nylon newar and unsv Ply top from charpoy and S&F New 08 mm thick plywood of suitable size, ISI marked,(Make:-Greenply/Archid ply/Century/Kitply) BWR Grade phenol bonded commercial plywood with suitable size nut and bolts all as shown on drawing and as directed.

Dismantling of old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes/ Toes as per Drg.

Book Case Steel Drawing No :- FD- 90 (M) Dismantling of old unsv and broken Glass of each compartment of Book Case and S&F new Glass of 4 mm Thick with suitable type fixing arrangement complete all as specified in drawing and directed.

Dismantling of old unsv and broken Handle of each compartment of Book Case and S&F new Stainless Steel Handle of 75 mm wide with suitable type fixing arrangement complete all as specified in drawing and directed.

Dismantling of old unsv and broken Locks of each compartment of Book Case and S&F new Locks with duplicate Keys Make:- Godrej, Link, Harrison with suitable type fixing arrangement complete all as specified in drawing and directed.

Charpoy GI Pipe with Ply Top Drawing No FD-220 A Dismantling of old unsv Ply top from Hard Bed Tightening the joints and S&F new 12 mm thick plywood of suitable size, ISI marked,(Make:-Greenply/Archid ply/Century/Kitply) BWR Grade phenol bonded commercial plywood with suitable size stainless steel nut and bolts 08 Nos for proper fixing it with long rails, short rails and stiffner all as shown on drawing and as directed.

Dismantling of old Unsv/ Broken MS Support of charpoy GI Pipe Ply Top and S&F New Flat Iron Stiffner of Size 900 mm x 25 mm x 5 mm dully Painted with two coat of Black Synthetic Enamel over a coat of Red Oxide Primer to support the ply top on long Rail and short Rail as specified and directed.

Table 900 mm x 600 mm with out Drawer. Drawing No :- FD- 42, 231& 284 Dismantling of old unsv top of table & S&F new table top of 18 mm thick prelaminated MDF Board exterior grade (Make:- Action Tesa /Century /Greenply) all around sides covered with PVC Edge Band Tape 1.6 to 2.0 mm thick with strong bonded chemical adhesive through hot pressed machine as specified and as directed.

Table 900 mm x 600 mm with Drawer. Drawing No :- FD-41, 224 & 283. Dismantling of old unsv top of table & S&F new table top of 18 mm thick prelaminated MDF Board exterior grade (Make:- Action Tesa /Century /Greenply) all around sides covered with PVC Edge Band Tape 1.6 to 2.0 mm thick with strong bonded chemical adhesive through hot pressed machine and suitable size stainless steel wooden screw for fixing of Top as specified and as directed.

Table Office Officer Wooden Type 'C' Drawing No:- F-34 Dismantling of old unsv top of table & S&F new table top of 18 mm thick prelaminated MDF Board exterior grade (Make:- Action Tesa /Century /Greenply) all around sides covered with PVC Edge Band Tape 1.6 to 2.0 mm thick with strong bonded chemical adhesive through hot pressed machine and suitable size stainless steel wooden screw for fixing of Top as specified and as directed.

Table Office Clerk Wooden Drawing No:-DB 4120 . Dismantling of old unsv top of table & S&F new table top of 18 mm thick prelaminated MDF Board exterior grade (Make:- Action Tesa /Century /Greenply) all around sides covered with PVC Edge Band Tape 1.6 to 2.0 mm thick with strong bonded chemical adhesive through hot pressed machine as specified and as directed.

Table Conference Drawing No :- TP Dismantling of old unsv Broken Top of Table conference and S&F New Top made of 18 mm Thick Plywood BWR Grade Both side commercial (Make:- Action Tesa /Century /Greenply) PVC Laminated Sheet 1.0 mm thick Decorative Type should be fixed on the top with suitable Adhesive. Top of Table should fixed on Top long Rails and Top Short Rails with suitable size stainless steel wooden screw. All around side of top of table should be covered with suitable size of Teakwood beeding as per Drawing and as directed.

Table Conference Drawing No :- TP Removing of old polishing with Grinder Machine and making the surface smooth by Rubbing it with emery paper and filling the holes with putty and applying one coat of wooden primer after this all surface external and internal view to exposed should be Polished with two coat of French Polish shade as approved by Garrisson Engineer or Engineer-in-Charge rest all as directed .

Dismantling of old unsv Broken Handle from various types wooden furniture ie Almirah Medium, Locker, Tables, Book Case, Book Shelf, Safe Meat and Milk, Hot Case, Side Board etc and S&F new Stainless Handle 100 mm long where ever required as approved by Garrison Engineer as per Drawing.

Dismantling of old unsv Broken Handle Almirah Large Wooden and S&F new Stainless Steel Handle 150 mm long as approved by Garrison Engineer as per Drawing.

Dismantling of old unsv Broken Butt Hinges from All Types of Wooden Almirah, Wooden Locker, Book Shelf, Book Case etc and S&F new Stainless Steel Butt Hinges 100 mm long as approved by Garrison Engineer as per Drawing.

Dismantling of old unsv Broken Butt Hinges from All Types of Wooden Almirah, Wooden Locker, Book Shelf, Book Case etc and S&F new Stainless Steel Butt Hinges 50 mm long as approved by Garrison Engineer as per Drawing.

Dismantling of old unsv Broken Knobs from various types wooden furniture ie Almirah Medium, Locker, Tables, Book Case, Book Shelf, Safe Meat and Milk, Hot Case, Side Board etc and S&F new Stainless Steel Knobs where ever required as approved by Garrison Engineer as per Drawing.

Dismantling of old unsv Broken Magnetic Clatcher from various types wooden furniture ie Almirah Medium, Locker, Tables, Book Case, Book Shelf, Safe Meat and Milk, Hot Case, Side Board etc and S&F new Magnetic Clatcher where ever required as approved by Garrison Engineer as per Drawing.

Dismantling of old unsv Broken Locks from various types wooden Tables, Book Case, Book Shelf etc and S&F new Locks with duplicate Keys Make:- Godrej, Link, Harrison where ever required as approved by Garrison Engineer as per Drawing.

Dismantling of old unsv Hard Rubber/ PVC shoes from various types Wooden Furniture i.e. All Types of Tables, Almirah, Book Case, Book Shelf, Safe Meat and Milk, Hot Case etc and S&F New Hard Rubber/ PVC Shoes 25 mm dia 25 mm high where ever required as approved by Garrison Engineer as per Drawing.

Removing of old paint with paint remover or with solvent and making the surface smooth by rubbing it with emery paper and grinder machine filling the holes with putty and applying one coat of red oxide primer after this external and internal surface of should be painted with two coat of synthetic enamel paint with spray machine shade as approved by Garrisson Engineer or Engineer-in-Charge rest all as directed . Table office Clerk Steel Drawing No :- FD-84, 307, 1004

All as per item No 69 here in above but Table office officer steel Drawing No FD- 84(M), 306, 1002, 1003

All as per item No 69 here in above but Table 3'x2' with Drawer Steel Drawing No :- FD-1008

All as per item No 69 here in above but Table 3'x2' with out Drawer Steel Drawing No :- FD-1007

All as per item No 69 here in above but Table 3'x3' Steel Drawing No :- FD-1009

All as per item No 69 here in above but Table OR's Aluminium Top Drawing No:- FD-165(M)

Table Steel with one drawer laminated Top size 1010 mm x 650 mm x 760 mm Drawing No :- TP

All as per item No 69 here in above but Charpoy Hard Top Drawing No:- FD/MAP-II/01

All as per item No 69 here in above but Box Kit Steel Drawing No:- FD-98

All as per item No 69 here in above but Trestle Store Room Steel Drawing No :- FD-86, 347, 1043

All as per item No 69 here in above but Book Shelf Open Large Steel Drawing No :- FD-69 (M)

All as per item No 69 here in above but Locker Bed Side Steel ( Built-in) Drawing No:- FD-1029.

All as per item No 69 here in above but Rack Six Tier Steel Drawing No :- CEHZ & FD-01R

All as per item No 69 here in above but Rack Steel Drawing No :- TP

All as per item No 69 here in above but Stool Steel Drawing No :- FD-81

All as per item No 69 here in above but Book Case Steel Drawing No :- FD- 90 (M)

All as per item No 69 here in above but Charpoy Folding IP with Nylon Newar and Ply top Drawing No FD-388 , FD-388 ( R).

Removing of old polishing with Grinder Machine and making the surface smooth by Rubbing it with emery paper and filling the holes with putty and applying one coat of wooden primer after this all surface external and internal view to exposed should be Polished with two coat of French Polish shade as approved by Garrisson Engineer or Engineer-in-Charge rest all as directed . (A) Almirah Large with shelves Drawing No :- DB- 4049

All as per item No 86 here in above but Almirah Med with shelves Drawing No :- DB- 3959

All as per item No 86 here in above but Almirah Med 1/2 H x 1/2 S Drawing No:- DB- 4042

All as per item No 86 here in above but Locker Bed Side Wooden Drawing No :- DB-4064 & FD-54

All as per item No 86 here in above but Rack Wooden Drawing No :- DB- 6064

All as per item No 86 here in above but Shelving 1' wide Drawing No :- TP

All as per item No 86 here in above but Table 600 mm x 600 mm Drawing No :- FD-95 & 293

All as per item No 86 here in above butTable 900 mm x 600 mm with Drawer. Drawing No :- FD-41,224 & 283

All as per item No 86 here in above butTable 900 mm x 600 mm with out Drawer. Drawing No :- FD- 42, 231& 284

All as per item No 86 here in above butTable 900 mm x 900 mm with Drawer. Drawing No :- FD-88(M) & 291

All as per item No 86 here in above but Table 5'x2'-10" Drawing No :- FD- 1 & 289

All as per item No 86 here in above but Table office clerk Wooden Drawing No :- DB-4120

All as per item No 86 here in above but Table office officer Type 'C' Drawing No :- F-34

All as per item No 86 here in above but Table Writing JCO's Medium Drawing No :- DB- 3982

All as per item No 86 here in above but Table Writing OR's Small Drawing No :- F-57

All as per item No 86 here in above but Table Writing Drawing No :- DB-3972

All as per item No 86 here in above but Safe Meat & Milk DB-4140, FD-47,370

All as per item No 86 here in above but Side Board FD- 26,241,371,1112

All as per item No 86 here in above but Hot Case FD-46,363,364

Trestle Store Room Wooden Drawing No :- FD-86 ,141. Removing of old enamel with sand paper or Grinder Machine as per needs from all wooden surface and All wooden surface shall be painted with two coats of creosote oil all as per drawing .

Removing of old Polish from wooden parts and old Enamel from steel parts of following furniture with Grinder Machine and Sand Paper making the surface smooth by Rubbing it with emery paper and filling the holes with putty and applying one coat of required primer on whole surface. After this all surface external and internal view to exposed should be Polished with two coat of French Polish and Steel surface with two coats of synthetic enamel shade as approved by Garrisson Engineer or Engineer-in-Charge rest all as directed . Desk Drawing No:- FD-107 & 1021

All as per item No 106 here in above but Foam with Back Drawing No:- FD-78

All as per item No 106 here in above but Foam without Back Drawing No:- FD-77

Rana Construction Co

sandhya enterprises

SRINIVASA AND BROS

SN POWER TECH

BALAJISTEELINDUSTRIES