RENEWAL AND REPLACEMENT OF FURNITURE IN LIEU OF

Overall size shall be 760mm long 440mm wide and 1270mm high. The base shall be made of two numbers mild steel sheet channel base welded to bottom of almirah and shall be 100mm high. The base channel shall be welded at 50mm from each end of 765mm lenght and shall be of 1 mm thick mild steel sheet. Three shelves equally spaced making four compartments shall be provided. body shall be made of 1 mm mild steel sheet. Front shuters shall have two leaves. A steel chromium plated handle100mm long and a three way locking device shall be provided to front shutters. Each leaf of front shuttter shall beside hung and hinged with two numbers MS butt hinges medium grade 75mm long. All joints and welding fixing shall be done in accordance with standard workmanship. All steel surfaces internally and externally exposed to view shall be enamel painted with spray machine over a coat of red oxide primer after preparation of steel surfaces. Colour of paint shall be as approved by GE. Rest all as specified shown in Drg and directed by Engineer in charge.

Over all size shall be 485mm wide 920mm long 1985mm high. Mild steel sheet shall be 1mm thick. Front shutter shall have two leaves of equal size. One chromium plated steel handle with a locking device shall be provided as shown on drawing. The locking device shall be three way locking device. Front shutter leaves shall have three MS butt hinges medium grade of 75mm fixed to each shutter which are side hung. All joints and welding and fixing shall be done in accordance with the standard workmanship. All steel surfaces internally and externally exposed to view shall enamel painted with spray machine over a coat of red oxide primer after preparation of steel surfaces. Colour of paint shall be as approved by GE. Rest all as specified shown in Drg and directed by Engineer in charge GE.

Overall size shall be 1900mm high 910mm wide and 490mm deep. 1mm thick mild steel sheet throughout shall be used to manufacture the Almirah except legs which shall be of 1.25 thick mild steel sheet. Two shelves space shall be provided to make three compartments while a drawer and locker to be provided as shown in the drawing. The drawer shall be mounted on roller channels for smooth movement. Front shutter shall have two leaves of equal size. All joints and welding and fixing shall be done in accordance the standard workmanship. Chromium plated steel handles and three way locking device shall be provided as shown on drg. All steel surfaces internally and externally should be powder coated after prepartion of surface. Colour of paint shall be as approved by GE. Rest all as specified shown in Drg and directed by Engineer in charge GE.

Overall size shall be 460mm long 600mm wide and 760mm high. Legs shall be made of 20mm dia mild steel conduit of wall thickness 1.6mm slanting 70mm horizontally for a vertical height of 355mm at front up to seat level. The horizontal distance between legs at seat level shall be 450mm and between bottom of legs shall be 600mm. The rear legs shall slant 80mm horizontally for 300mm height at the back of seat level to bottom of rear legs. The seat frame shall be welded to the frame of legs. The seat frame with back seat shall be of continuous 20mm dia mild steel conduit of wall thickness 1.6mm.Two 20mm dia mild steel tube conduit shall be welded at the back rest and the rear of seat. A 10mm dia mild steel round bar rod welded to front legs at 75mm from bottom of seat shall be provided as shown on drawing. Canning shall be done with 3mm wide white cane plastic virgin quality in MAT pattern round the 20mm dia conduit in seat and back rest as shown on drawing and as directed by Engineer in charge. PVC or hard rubber shoe shall be provided to bottom of all legs as shown on drawing.All steel surfaces exposed to view when placed in position shall be painted with two coat of white enamel paint over a coat of primer after preparation of surfaces. Rest all as specified shown in Drg and directed by Engineer in charge GE.

Overall size shall be 2050mm long 900mm wide and 400 high. All steel shall be of rectangular CR pipe of 18 Gauge. The head board shall be 800mm high and foot board shall be 500 mm high. The frame of head board and foot board shall be of 38mm x38mm ractangular CR pipe 18mmx18mm ractangular CR pipe shall be provided in the inner of head board frame foot or board frame as shown in drg. 18mm thick both side decorative prelaminated particle board of shade as approved by GE with PVC lipping with edge bands shall be screwed to MS strip welded to 18mm thick ractangular CR pipe with standard workmanship.Both in headboard foot board 25mmx65mm ractangular CR pipe shall be used to make the long rails and short rails of bed hard and welding shall be done for fixing long rails to the legs irrespective of what is shown on drg. One stiffner of size 25mmx25mm shall be welded between the two legs of headboard over 150mm from the ground level. The Top of bed hard shall be of 12mm thick BWR ply of make approved by Garrison Engineer fixed over the four equidistant stiffner of size 25mmx25mm square MS pipe in line with bottom of 25x65mm long rail section. Black PVC shoes shall be provided to legs of bed. All steel surfaces shall be treated with powder coated paint not less that 70 microns black colour including prepration of steel surfaces. Rest all as per drawing as directed by Engineer in Charge or GE.

Long and short rails of bed shall be 65x25 mm 16 guage rectangular MS pipe. Stiffner shall be 25mm 16 gauge square MS pipe. Legs shall be 32mm 16 guage square MS pipe and welded properly at joints to make the charpoy 25x60x6mm cleats be welded with short inner side to support the plywood 12 mm thick plywood BWR typeof make approved by Garrison engineer unpolished shall be provided to the top of charpoy screwed to stiffner by nut and washers. All steel surfaces shall be treated with powder coated paint not less that 70 microns black colour including prepration of steel surfaces. Rest all as per drawing as directed by Engineer in Charge or GE.

Earl Mid back Make Godrej

Overall size shall be 560mm long 700mm wide and 710mm high. Frame of chair and legs shall be of 19mm square steel tube of wall thickness 1.6mm. 32 density foam 50mm thick cushion shall be fixed over 12mm thick teak wood planks and upholstered with leatheriate provided for seat of 560mmx635mm. Arm rest 19mmx65mm in section shall be provided. All steel and iron surface shall be given two coats of enamel paint over a coat of primer after prepration of surface. All wood surface exposed to view when placed in position shall be french polished with high gloss finish. Welding to joints of steel shall be grinded to smooth finish. Rest all as per drawing as directed by Engineer in Charge or GE.

Over all size shall be 1980mm long 900mm wide and 450mm high. Irrespective of what has been shown in the drawing the top over U Frame shall be of BWR plywood 12 mm thick in two pieces shall be fixed using nut washer and bolts of suitable size. The frame shall be of 35mm dia mild steel pipe of wall thickness of 2 mm the open ends of U shaped frames shall be joined by flat iron gusset pipe plate 2Nos cut to shape and joined as per drawing. Middle legs shall be of 35mm dia and 2mm wall thickness. The legs shall be made as U shape and shall be provided at both sides of the charpoy frame. PVC shoes shall be provided to bottom of all legs. Painting shall be done with enamal paint black in colour after preparation of surfaces as directed by Engineer in charge. A horizontal pipe piece shall be fixed at 125mm below the bottom of top pipe of leg frame. Rest all as per drawing as directed by Engineer in Charge or GE.

Earl high back Make Godrej.