SPECIAL REPAIRS TO BLDG NO P-288, P-439 AND T-71 AT MIRC UNDER GE (S) AHMEDNAGAR

Amount

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking out shutter from the frame), area n exc 1.5 sqm each all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking out shutter from the frame), area exc 1.5 sqm but not exc 4 sqm each all as specified and as directed.

Dismantling floor, hearth or wall tiling, including cement mortar bedding (but not backing), removing rubbish off the premises all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm thick (below or above ground level) all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position all as specified and as directed.

Dismantling of Kota/Cudappah/Granite stone slab of any description or thickness in floor, skirting, dado, apron etc laid bedded and pointed in any mortar all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and as directed.

Taking down 15mm bore steel tubing and connections including cleaning for refixing pipe etc.all as specified and as directed.

Taking down 20mm bore steel tubing and connections including cleaning for refixing pipe etc.all as specified and as directed.

Taking down 25mm bore steel tubing and connections including cleaning for refixing pipe etc.all as specified and as directed.

Excavation over areas, n exc 1.50m in depth and getting out in soft/loose soil all as specified and as directed.

Removing excavated soil to distance n exc 50 m and depositing where directed at a level n exc 1.50 m above the starting point all as specified and as directed.

M&L for moorum filling in floors and pavings, laid in layers n exc 15cm thick, spreading, levelling and ramming including watering all as specified and as directed.

M&L for hardcore of broken stone or boulders of gauge exc 63mm but n exc 100mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rolled/rammed to a true surface all as specified and as directed.

M&L for PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in cills, steps, seismic and other similar bands, plinth courses, copings, filling in back of pressed steel frame and the like including necessary formwork, weathering, slightly rounded or chamfered angles and throating all as specified and as directed.

M&L for RCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in foundations, including rafts, basement/ground floor slab and mass concrete etc all as specified and as directed.

M&L for RCC 1:2:4, type B-1 (using 20mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5 m span all as specified and as directed.

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc all as specified and as directed.

Supply only integral water proofing compound, ISI marked all as specified and as directed ( Make shall be approved by GE)

M&L for brick work with fly ash bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6 all as specified and as directed.

S&F 35mm thick, factory made, second class hardwood, plain, framed panelled shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS;1003 (Part-I), kiln seasoned and chemically pressure treated all as specifed and as directed.

S&F 35mm thick, factory made, second class hardwood, glazed and skeleton shutter, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, etc; size of members of shutters as specified in SSR Part-I, section 8, clause 8.24(a), and fitted to chowkat all as specifed and as directed.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm thick wood grain printed coloured PVC sheet, reinforced with mild steel square tube and edges shall be painted to match with printed sheet all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick [stiles] with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet Polyurethane painted on front face and 2mm thick prelam PVC sheet on back face with particle board core fixed to frame at site as per specifications & drawings all as specified and as directed.

S&F powder coated aluminium door with frame and shutter in two panels (top and bottom) made out of aluminium sections (make Jindal or equivalent) including 5 mm thick sheet glass, aluminium cleats, rubber/ neoprene beading, all necessary fittings and locking arrangements etcall as specified and as directed and comprises of following sections :- (a) Vertical style- 47 x 44.5 x 2.25 mm thick @ 1.15 Kg/m (Min) (b) Lock rail- 114.6 x 44.45 x 2.3mm thick @ 2.06 Kg/m (Min) (c) Bottom rail-114.6 x 44.45 x 2.3mm thick @ 2.06 Kg/m (Min) (d) Frame-47.5 x 44.45 x 2.25 mm thick @ 1.12 Kg/m (Min)

S&F powder coated aluminum windows, three track, made out of aluminium sections (make Jindal or equivalent) including all necessary fittings, 5mm thick sheet glass, rubber/ neoprene beading, locking arrangements all as specified and as directed and comprises of following sections :- (a) Window frame (i) Bottom-Section 20671 (Wt not less than 0.699 Kg/m) (ii) Top & Size - 20672 (Wt not less than 0.594 Kg/m) (b) Shutter (i) Vertical (end)- 20669 (Wt not less than 0.481 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m)

S&F 100mm size butt hinges, medium weight, colled rolled, mild steel and fixed all as specified and as directed.

S&F 150mm size aluminium anodized barrel tower bolts of extruded section and fixed all as specified and as directed.

S&F 125 mm size extruded aluminium alloy handles, fabricated type anodised and fixed all as specified and as directed.

S&F 300mm long aluminium alloy anodised sliding door bolts with hasp, staple and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolt all as specified and as directed.

S&F 300mm size mild steel odinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with stainless steel staples to wooden/steel frames all as specified and as directed.

S&F in repairs, galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with stainless steel staples to wooden/steel frames all as specified and as directed.

S&F mild steel pressed steel door frames of size 105mm x 60mm for doors with one or more rebates, including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

M&L for mild steel TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L for mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

S&F mild steel windows, side hung, including projecting type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and as directed.

S&F mild steel ventilator with top hung shutter, including hinges, steel peg stay, complete all as specified and as directed.

S&F mild steel framed work conforing to Fe 290 Gde E-165 such as grills, gratings, guard bars etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron doors ladders and smilar work all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for non-skid ceramic coloured tiles, 7 to 8 mm thick (square or rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc laid on and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles all as specified and as directed.

M&L for glazed ceramic coloured tiles 300mm x 200mm x 7mm thick, as in skirting/dado using coloured tiles fixed over and including 10mm thick plaster in cement mortar 1:4 as in backing coat, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles all as specified and as directed.

M&L for vitrified light colour tiles, 10mm thick (square or rectangular), area of each tile exc 0.36 sqm but n exc 0.42 sqm in floors, laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles all as specified and as directed.

M&L for vitrified light colour tiles, 10mm thick (square or rectangular), area of each tile exc 0.36 sqm but n exc 0.42 sqm, fixed on vertical surfaces such as skirting/dado, over and including 10 mm thick rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles all as specified and as directed.

M&L for 20-25 mm thick machine cut kota stone flooring (size of kota stone slab not less than 22"x22"). laid over and including 20 mm thick screed bed in cement mortar 1:6, set, jointed and pointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror finish polishing complete all as specified and as directed.

M&L for 18-20mm thick machine cut kota stone on vertical surfaces such as skirting/dado, laid over and including 10 mm thick backing coat in cement mortar 1:4, set, jointed and pointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and polishing complete all as specified and as directed.

M&L for 20-25 mm thick machine cut Cudappah stone slab laid over and including 20mm thick screed bed in cement mortar 1:6, set, jointed and pointed with grey cement slurry, mixed with pigments to match the shade of slab including cutting, rubbing and polishing complete all as specified and as directed.

M&L for 18-20mm thick machine cut and prepolished (mirror polish) granite stone slab as in table top, top for WHB, platform and like with full round moulded edges, laid over and including 15mm thick screed bed in cement mortar 1:4, set, jointed and pointed with grey cement slurry mixed with pigments to match the shade of slab complete all as specified and as directed. (Note: Shade of granite shall be approved by GE)

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with water proofing compound @ 3% weight of cement or as per manufacturers instructions, finished even and fair without using extra cement all as specified and as directed.

M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth with thin layer of sagol all as specified and as directed.

M&L for rendering 5mm thick on fair faces of concrete ceiling surfaces in cement mortar 1:4, finished even and smooth without using extra cement all as specified and as directed.

M&L for complete removal of existing treatment for old decorated wall surfaces complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting including a coat of 1.50mm thick wall care putty complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying two coats of white wash all as specified and as directed.

M&L for preparation of old plastered or unplastered surfaces of ceilings and applying two coats of white wash all as specified and as directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of cement base paint all as specified and as directed.

S&F 3 mm thick plain sheet glass, ordinary quality including glazing with oil putty in squares n exc 0.5sqm in each pane all as specified and as directed.

S&F 3 mm thick frosted sheet glass includig glazing with oil putty in squares n exc 0.5sqm in each pane all as specified and as directed.

M&L for preparation of new seel surfaces of any description exc 10cm in width or grith and applying two coats of synthetic enamel paint over a coat of red oxide all as specified and as directed.

M&L for preparation of old painted wood or wood based material of any desciption over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old steel & iron surfaces of any desciption exc 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plaster surface. Rendering again 10 mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC and CI pipe joints shall be filled / jointed with mixture of cement, fine sand and Nittoproof 130 and provide hole in the wall and fix spout made out of 600 mm long and 20mm bore GI pipe, medium grade and filling floor area of WC/bath upto 1.50Sqm with PCC 1:3:6, type C 2 (using 40mm graded stone aggregate) etc complete all as specified and as directed. (Note :- The rates incl for drilling of the hole RCC @ 1.00 m centre to centre, to a depth to a length of 30 mm and fixing of PVC pipes of dia 15/20 mm laid dry and grouting with cement slurry mixed with can bax 100 chemical with pressure grouting with minimum 3 Kg/Sqm) all as specified and as directed.

M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plaster surface. Rendering again 10 mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC and CI pipe joints shall be filled / jointed with mixture of cement, fine sand and Nittoproof 130 and provide hole in the wall and fix spout made out of 600 mm long and 20mm bore GI pipe, medium grade and filling floor area of WC/ bath exc 1.50Sqm but n exc 3.00 Sqm with PCC 1:3:6, type C 2 (using 40mm graded stone aggregate) etc complete all as specified and as directed. (Note :- The rates incl for drilling of the hole RCC @ 1.00 m centre to centre, to a depth to a length of 30 mm and fixing of PVC pipes of dia 15/20 mm laid dry and grouting with cement slurry mixed with can bax 100 chemical with pressure grouting with minimum 3 Kg/Sqm) all as specified and as directed.

S&F in repairs, vitreous China, white, squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest, set in cement concrete including flush pipe and connecting to trap / flushing cistren and making good to floor complete all as specified and as directed.

S&F in repairs, vitreous china wash down water closet ( pedestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S & F in repairs vitreous china wash hand basin, white flat back size 450 mm x 300 mm including brackets including pillar tap, 15 mm bore chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed.

S & F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F in repairs, health faucet (hand shower) with 1.2 metre long PVC tube and wall hook all as specified and as directed. Make : Model No. ALD-563 of Jaquar or equivalent model of Kolher/ Prayag/Johnson/Plumber

S&F in repairs, vitreous china bowl urinal, flat back of size 465mm x 355mm x 265mm, white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including PTMT urinal spreader, white, 15mm bore and fixed complete all as specified and as directed.

S&F in repairs, plastic water closet seat, white closed pattern with flat bottom and cover including aluminium/ mild steel hinging device all as specified and as directed.

S&F in repairs, towel rack/shelf 600mm long with multi rods, cast copper alloy, chromium plated with hooks, fixed to wall with brass screws complete all as specified and as directed.

S&F in repairs, stainless steel napkin hanger, ring type, 150mm dia, fixed to wall with brass screws complete all as specified and as directed.

S&F in repairs, stainless steel toilet paper holder, best quality as approved by GE, fixed to wall with brass screws complete all as specified and as directed.

M&L for 15 mm bore dia steel water tubes, medium grade galvanised with all fittings and fixed complete to wall and ceilings or laid in floor etc. all as specified and as directed.

M&L for 20 mm bore dia steel water tubes, medium grade galvanised with all fittings and fixed complete to wall and ceilings or laid in floor etc. all as specified and as directed.

M&L for 25 mm bore dia steel water tubes, medium grade galvanised with all fittings and fixed complete to wall and ceilings or laid in floor etc. all as specified and as directed.

Fixing only 15 mm bore dia tubes, medium grade galvanised with new fittings and fixed complete in wall, ceilings or laid in floor etc. all as specified and as directed.

Fixing only 20 mm bore dia tubes, medium grade galvanised with new fittings and fixed complete in wall, ceilings or laid in floor etc. all as specified and as directed.

Fixing only 25 mm bore dia tubes, medium grade galvanised with new fittings and fixed complete in wall, ceilings or laid in floor etc. all as specified and as directed.

S&F in repair, PVC connection 600mm long, 15mm dia with PTMT nuts fixed all as specified and as directed.

S&F in repairs, bib taps, 15mm bore, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs, bib taps, 15mm bore, fancy type, cast copper alloy, chromium plated with capstan head, screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs, stop valves, 15mm bore, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed all as specified and as directed.

S&F in repairs, angle cock, 15mm bore, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs, 20mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed omplete all as specified and as directed.

S&F in repairs, 20mm bore ball brass valve, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed omplete all as specified and as directed.

S&F in repair, tubular towel rail, 20mm bore, brass chromium plated, D type, 60cm long between flanges including a pair of brackets complete all as specified and as directed.

S&F in repairs, shower rose, 125mm size, cast copper alloy, chromium plated with or without swivel joints including fixing to steel pipe of 15mm bore complete all as specified and as directed.

S&F in repairs, PVC (SWR) floor trap, 75mm dia of outlet, plain with grating including jointing with solvent cement to waste pipe, fixed in cement concrete,1:2:4 type B-1 (using 20mm graded stone aggregate) complete all as specified and as directed.

S&F in repairs, PVC (SWR) multi floor trap, 75mm dia of outlet, plain with grating including jointing with solvent cement to waste pipe, fixed in cement concrete,1:2:4 type B-1 (using 20mm graded stone aggregate) complete all as specified and as directed.

S&F in repairs, PVC (SWR) gully trap, 125/100mm with grating, setting and jointing with solvent cement to waste pipe and fixed in cement concree,1:2:4 type B-1 (using 20mm graded stone aggregate) complete all as specified and as directed.

S&F in repairs, grating doom,PTMT, 100mm dia complete all as specified and as directed.

S&F in repairs, 32/40mm bore PVC flexible waste pipe for wash hand besin/sink/ urinal complete all as specified and as directed.

S&F in repairs, 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs, 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F in repairs, 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs, 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F in repairs,110mm bore PVC (SWR) bend any radius, complete all as specified and as directed.

S&F in repairs,75mm bore PVC (SWR) bend any radius, complete all as specified and as directed.

S&F in repairs, 110 mm bore PVC (SWR) junction single, (single T) with oval access door complete all as specified and as directed.

S&F in repairs, 75 mm bore PVC (SWR) junction single, (single T) with oval access door complete all as specified and as directed.

S&F in repairs, 110 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal with oval access door complete all as specified and as directed.

S&F in repairs, 75 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal with oval access door complete all as specified and as directed.

Taking down carefully any type of point wiring (light, fan, bell, socket or power), complete excluding light fittings and DBs but including switches, ceiling roses, pendants, regulators, sockets, etc. and making good disturbed surfaces of walls, ceiling, floors etc to match with existing surface complete all as specified and as directed.

M & L for point wiring complete on surface of wall (open) type with two runs of 1.5 sqmm for phase and neuatral single core multistranded copper conductor cable of 1100 Volts grade PVC insulated and unsheathed , FRLS cable drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards for mounting switches, sockets, fan Regulators, accessories etc for One light/fan point controlled by one way switch all as specified and as directed NOTE: (1).Proper colour coding shall be adopted for wiring (for phas-RED,YELLOW,BLUE for Earth-Green and Neutral-Black) (2 ). All points shall be earthed up to fixtures i.e holders,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc.)

All as per serial item No 112 above but one 5 Amp 5 pin socket outlet point on same board with other switches

All as per serial item No 112 but for one switch socket out let 3 pin, 5 Amps point on independent board.

All as per serial item No 112 above but with 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including PVC/wooden folding boards for mounting purposes all as specified and as directed

S&F switch piano, flush type , single pole , one way , 6 Amps, 230 volts complete all as specified and as directed.

S&F socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified and as directed.

S&F switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.

S&F switch socket combination multipurpose, flush type 2 in 1 type (6 pin ) 6/16 Amps, 230V, AC. all as specified and as directed.

S&F lamp holder angle/batten type, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and as directed.

S&F ceiling rose, surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish all as specified and as directed.

S&F in repairs, LED box type fitting pre-wired including LED tube 1 x 20 W connecting up with PVC insulated and sheathed 1100 volt grade flexible copper cable complete all as specified and as directed. Make:- Havells Model-LUMILINEPLUSBS20WLED865SPCSS or equivalent model of make Philips / GE/ Crompton/ Halonix/ Century LED/Luker

S&F in repairs, LED light fitting, Lumeno LED bulb 10 Watt (Cool day light) having colour temp 6500 K and lumen output 900 suitable for B-22 type to fix on batten holder and wall light etc complete all as specified and as directed. Make : Havells cat No LHLDEUEEML8R010 or Equivalent model of make Philips / GE/ Luker/ Crompton/ Halonix/ Century LED

M&L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible FRLS copper conductor 1100Volts grade cables 4 Sqmm drawn through and including PVC heavy duty surface casing caping, including 2.5 Sqmm 1100Volts grade PVC insulated unsheathed multi stranded flexible FRLS copper conductor cable as continuous earth wire and connecting to common earth terminals including taking down old sub-main wiring complete all as specified & as directed. NOTE: (1) Proper colour coding shall be adoptd for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black) (2) Two run of 4 sq.mm for one run for phase,one run for neutral with one run of 2.5 sqmm cable for earth and one run of PVC casing & caping shall be measured as one unit all as specified and as directed.

S&F in repairs, MCB SP, AC 240 V, 6 to 32 Amps, 10 KA capacity ,'b' series making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F in repairs, MCB SPN, AC 240 V,40 Amps 10 KA capacity ,'c' series making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F in repairs, sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts 4 way protection class IP-42,suitable for fixing MCBs,Isolators etc,confirming As per IEC 61439-3,suitable for flush mounting and surface mounting,with 200 Amps rated copper busbar,with Neutral bar,Earthbar and cable lies for cable managment,fully shrouded,Neutral bars,prefittes masking sheet complete all as specified and as directed. Make: Havells,Cat No:DHDMSH0DDW04 or Equivalent model of make Philips / GE/ Luker/ Crompton/ Halonix/ Century LED

S&F in repairs, security light of building with single piece new generation energy savng and environmental friendly long life LED, 30W, made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 including one bracket made of Light grade GI Pipe 25 mm dia 1.5 mtr long fixed to wall/ pole with two clamps made out of mils steel FI 40 mm x 5 mm and connect to nearest electric supply by three core 1.5 sqmm aluminium cable all as specified and as directed. Make : Havells Cat No ENDURACITYLITEPLATSL30WLED757SASYBOPC or equivalent model of make Philips / GE/ Crompton/ Halonix/ Century LED/Luker

M&L in repairs/replacement earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.3 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia , by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GI pipe, medium grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.

S&F 300 mm sweep metallic exhaust fans, AC, single phase, 230/240 volt, with blades, frame, louvers and making good disturbed surfaces as per existing including taking down existing exhaust fan and removing to MES store complete all as specified and as directed.

Supply, installation , testing and commissioning of vertical water heater storage type, steel body with copper inner tank and heating element upto 2 KW of capacity 25 litres,BEE 5 star rated, AC, 50 Hz, 230 Volts complete with thermostate, temperature control knob,,NRV, safety valve, inlet and outlet ports, connection piece and all acessories and connections including taking down existing water storage heater and removing to MES store all as specified and as directed.

AMAR CONSTRUCTION

Vinod Enterprises

M/s Meher Construction

M/s. N D Karande

Siddhant Hukumchand kumath