Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
1 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE AF OJHAR
GE AF OJHAR AIR FORCE STN OJHAR DIST NASHIK 422221
REPAIRS TO DRAIN , CULVERTS, PATH COVER SLAB AT SMQ AND ADM AREA AT 25 ED AF STN DEOLALI UNDER GE (AF) OJHAR
2026_MES_798083_1
8485/E8
Open Tender
Civil Works - Others
Item Rate
270 days
GE AF OJHAR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE AF OJHAR
₹60,000
Yes
10 Nov 2026
10 Nov 2026
3 Dec 2026
10 Nov 2026
1 Dec 2026
26 Nov 2026
10 Nov 2026 - 25 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etc and removal of debris outside MoD land and depositing where directed. | 300 | Square Metre | - | - |
| 2 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15 cm thick above or below ground level and removal of entire debris as ordered outside MD land complete all as directed. | 25 | Cubic Metre | - | - |
| 3 | All same as per per item No 2 here-in-above but reinforced cement concrete do - | 46 | Cubic Metre | - | - |
| 4 | Demolition of brickwork , block masonry or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of debris as ordered outside MD land complete all as directed. | 50 | Cubic Metre | - | - |
| 5 | Demolition of stone slabs and tiles of any description or thickness in floors, platform, aprons etc., laid, bedded and pointed in any mortar , stacking serviceable slbs at site and removal of entire debris as ordered outside MOD land complete all as directed. | 67 | Ten Square Metre | - | - |
| 6 | M & L for PCC 1:4:8, type D2 using 40 mm graded crushed stone aggregate as in foundation filling mass concrete complete all as specified and directed | 12 | Cubic Metre | - | - |
| 7 | M&L for cement concrete 1:2:4 type B1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded, chamfered angle and throating as directed including use and waste of form work (straight or curved) all exposed surface of concrete finished fair complete all as specified & as directed | 4.17 | Cubic Metre | - | - |
| 8 | M&L for precast RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in CM (1:6) complete all as specified & as directed.
Note :- Reinforcement shall be measured and paid for separately. | 3 | Cubic Metre | - | - |
| 9 | S & F for precast Steel Fibre Reinforced Concrete (SFRC) cover, Grade Designation HD-20, ISI marked and conforming to IS 12592:2002, of size 1200 mm × 600 mm with minimum 75 mm thickness or more as required at site, complete with edge protection using MS flat 75 mm × 5 mm, suitable for load-bearing capacity corresponding to wheel loads between 50 kN and 100 kN, including handles, lifting bars, all necessary fittings, fixtures, and accessories, complete all as directed by the Engineer-in-Charge | 15 | Each | - | - |
| 10 | S & F for precast Steel Fibre Reinforced Concrete (SFRC) cover, Grade Designation HD-20, ISI marked and conforming to IS 12592:2002, of size 600 mm × 600 mm with minimum 75 mm thickness or more thickness as required at site, complete with edge protection using MS flat 75 mm × 5 mm, suitable for load-bearing capacity corresponding to wheel loads between 50 kN and 100 kN, including handles, lifting bars, all necessary fittings, fixtures, and accessories, complete all as directed by the Engineer-in-Charge | 20 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
TENDER8485.pdf
Tender Documents • 0.94 MB
BOQ_895296.xls
BOQ • 2.84 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .