Spl repairs to building No. TE 316 and P 9 PI Mess at Old Cantt Allahabad.

Amount

Demolition of Cement Concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removing rubbish off the MD premises, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, comlete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed.

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

Light coloured full body Vitrified tiles, 600mm x 600mm x 9 to 10 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including provision of screed bed of 15mm thick in CM 1:6, complete all as specified and directed.

Light coloured full body Vitrified tiles, 600mm x 600mm x 9 to 10 mm thick, in vertical surfaces such as skirtings etc. set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including provision of backing coat of 10mm thick in CM 1:4, complete all as specified and directed. NOTE:- Height of skirting shall be 100mm

Plain cement concrete 1:2:4, type B0 (using 12.5mm graded stone aggregate), 25mm thick as in sub base of floors, complete all as specified and directed.

Brickwork with old size fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finishing the surface even and smooth with out using exta cement, complete all as specified and directed.

Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finishing the surface even and smooth with out using exta cement, complete all as specified and directed.

Providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5sq.m each with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5sq.m but not exceeding 4sq.m each with shutters (without taking off shutters from the frames), complete all as specified and directed.

Aluminium door, single leaf, with anodised aluminium frame of section 62.5mm x 37mm x 1.5mm thick, shutter with bottom and middle rail of section as 112.50mm x 37mm x 1.5mm thick with central locking arrangement with 7-lever lock of make Godrej / Linc, and self closing device with rebate incluidng joining cleats, fixing of buildings hardware fittings, with and including provision of floor spring, necessary fixtures, aluminium snap beads etc., fixed in repair, complete all as specified and directed.

Aluminium window, partially openable type, with anodised aluminium frame of section 62.5mm x 37mm x 1.5mm thick, shutter having syles and rails of section as 44.45mm x 44.45mm x 1.5mm thick, including joining cleats, glazing clips, rubber packing, aluminium snap beading, screews, anodised aluminium fittings such as hinges, tower bolts, handles etc.., with and including provision of sheet glass 5.5mm thick ordinary quality, including provision of aluminium chequered gill of anodised section of mesh size 100mm x 100mm, 8mm dia bar fixed to frame with 20mm x 5mm thick aluminium flats fixed with screws, fixed in repairs, complete all as specified and directed.

Provision of false ceiling, consisting of E-Board of make : Everest or techno-commercially equivalent in Armstrong / Sanitgobain, desing "lake and hill" of sie 605mm x 605mm x 4mm thick, white prelaminated set, embossed reinforced designer ceiling board tiles of approved texzture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section (white powder coated); the framework shall comprises of main runner made of 0.33mm thick GS sheet and of size 24mm x 32mm x 300mm and spaced at 1200mm (maximum) centre-to-centre, securely fixed to structural soffits with hangers of 1.60mm dia GI wire, to be fixed with approved rawl plugs, adjusters and screws; flush fitting of 1200mm long cross tee (double section) to be interlocked between main runners at 600mm centre-to-centre to form 1200mm x 1600mnm modules, cross tee shall be longer than 600mm, to be supported independently. 600mm x 600mm doubles to be formed by fittings 600mm long cross tee centrally between 1200mm corss tee; perimeter wall angle shall be made out of 0.45mm thick GS sheet of size 19mm x 19mm and 300mm long of white colour, all as per manufacturers specifications, complete all as specified and directed.

Preparation of previously untreated surfaces of brick, stone, concrete, asbestos cement or newly plastered surfaces of walls of any description over 10cm width or girth not otherwise described and applying two coat of acrylic emulsion paint over a coat of chalk whiting, finished even and smooth, complete all as specified and directed.

Preparation of previously untreated surfaces of brick, stone, concrete, asbestos cement or newly plastered surfaces of walls of any description over 10cm width or girth not otherwise described and applying two coat of cement base paint over a coat of white wash, finished even and smooth, complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and directed.

Rolled mild steel sections conforming to Fe-410 W (Grade E-250) quality 'A' as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., complete all as speicirfed and directed.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering / cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering / cladding to wall, ridge and valley gutters, eaves boards etc., fixed with self tapping screws as specified, complete all as specified and directed.

Plain cement concrete 1:4:8, type D2 (using 40mm graded stone aggregate), for foundation filling and mass concrete including sub bases to floors, complete all as specified and directed.

Machine pressed, rubber moulded, coloured, precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade, with grey cement and no pigment, laid over and including provision of 25mm thick sand cushioning including taking out old and unserviceable paver blocks any type alongwith underlying bed of any type, complete all as specified and directed. MAKE:- Interlocking paver blocks shall be as approved by GE

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

Dismantling fencing wire mesh / chain link fencing, any type, complete all as specified and directed.

Excavating in post holes (or similar holes) each not exceeding 0.5cu. m, getting out in soft / loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

Mild steel miscellaneous work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Plain cement concrete 1:2:4, type B2 (using 40mm graded stone aggregate), in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases), complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long, diameter of neck shall be 11 to 15mm, complete all as specified and directed.

Preparation of new surfaces of steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Complete removal of existing treatment from surfaces of walls by scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots with wire brushes and removing existing loose particles etc., and applying two coat of acrylic emulsion paint over a coat of alkali resistant primer over two coats of internal grade wall care putty (the total thickness shall not be less than 1.50mm), finished even and smooth, complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. to match with the existing, complete all as specified and directed.

Point wiring complete with 1.5 sq.mm PVC insulated unsheathed multi-stranded FR copper conductor 1100 Volts grade, ISI marked, drawn through in and including 20mm dia rigid PVC conduit medium grade and conduit accessories, concealed in stone / brick masonry walls, roofs, floors etc, including provision of 1.00mm thick factory made pressed steel terminal box of required size, duly painted both inside and outside with two coat of black bituminous paint over a coat of red oxide primer, duly covered with 2.8mm thick prelaminated sheet cover of colour as approved and duly concealed in walls for housing switches, sockets, regulators etc., including 1.5sq.mm PVC insulated unsheathed multi-stranded FR copper conductor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed for one light point controlled by one 5 Amp one-way switch, complete all as specified and directed. NOTE:- (i) The quoted rate shall deemed to include the cost of pressed steel terminal boxes, prelaminated sheet cover etc. (ii) Quoted rate shall also deemed to include cost of making necessary chases in walls for inserting metal boxes and making good the disturbed surfaces to match with existing

All as per Sl. Item No. 37.00 here-in-before but for 5-pin 5Amp socket outlet point on independent board

All as per Sl. Item No. 37.00 here-in-before but for one 5-pin socket oiutlet 5 Amp on same board alongwith other switches

Point wiring complete with 2.50 sq.mm PVC insulated unsheathed multi-stranded FR copper conductor 1100 Volts grade, ISI marked, drawn through in and including 20mm dia rigid PVC conduit medium grade and conduit accessories, concealed in stone / brick masonry walls, roofs, floors etc, including provision of 1.00mm thick factory made pressed steel terminal box of required size, duly painted both inside and outside with two coat of black bituminous paint over a coat of red oxide primer, duly covered with 2.8mm thick prelaminated sheet cover of colour as approved and duly concealed in walls for housing switches, sockets, regulators etc., including 2.50 sq.mm PVC insulated unsheathed multi-stranded FR copper conductor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed for one 6-pin, 15/16 Amp socket outlet, complete all as specified and directed. NOTE:- (i) The quoted rate shall deemed to include the cost of pressed steel terminal boxes, prelaminated sheet cover etc. (ii) Quoted rate shall also deemed to include cost of making necessary chases in walls for inserting metal boxes and making good the disturbed surfaces to match with existing

Switch piano, flush type single pole, one-way 5 Amp, white or ivory colour, ISI marked, complete all as specified and directed.

Socket outlet 2 in 1, 5 pin, 5A, flush type, ISI marked, complete all as specified and directed.

Switch piano, flush type single pole, one-way 15/16 Amp, white or ivory colour, ISI marked, complete all as specified and directed.

Socket outlet 2 in 1, 6 pin, 15/16 Amp, flush type, ISI marked, complete all as specified and directed.

Lamp holder, PVC polycarbonate body with back plate suitable for batten fittings, complete all as specified and directed.

Ceiling rose three terminal PVC / polycarbonate insulated body, surface bakelite type AC 50 Hz 230V, complete all as specified and directed.

Ceiling fan 230Volt, 50Hz, single phase AC supply, 1200mm sweep with and including provision of 3 core 1.5 Sq.mm flexible cable from ceiling rose to fan including writing MES number on fan motor using synthetic enamel paint of approved tint, complete all as specified and directed. MAKE:- Havells / Bajaj / Crompton Greaves

Stepped (rotary) type electronic fan regulator (suitable for 1200mm / 1400mm sweep ceiling fan) flush type duly fixed on the existing phenolic laminated sheet etc. as required, 240V, humming free, complete all as specified and directed. MAKE:- Havells / L&T / Legrand

MCB DB, SPN, double door, epoxy powder coated, factory made 8-way sheet metal enclosure with category of protection IP-42, 240V, with tinned copper 200Amp rated bus bar suitable for MCBs, with blank plates, fixed in repairs, complete all as specified and directed. MAKE:- Legrand / Havells / L&T / ABB

MCB SPN 6 - 32 Amp, 240 Volt, 'B' curve, 10KA breaking capacity, complete all as specified and directed.

MCB SP 6 - 32 Amp, 240 Volt, 'B' curve, 10KA breaking capacity, complete all as specified and directed.

LED bulk head light fitting, 10W, 600lumen, enclosed in polycarbonate body, weather proof, fixture with co-extruded polycarbonate body, environmental friendly, energy efficient, complete with all accessories, pre-wired and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp, fixed inr repairs, complete all as specified and directed. MAKE:- Cat No. HEXAFT10WLED857SSY MBOPC of Havells or techno-commercial equivalent model in Crompton / Wipro / Philips

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20-32Amp 240V, 'C' curve, fixed in repairs, complete all as specified and directed. MAKE:- Legrand / Havells / L&T / ABB

Recess mounting decorative LED fitting, size 600mm x 600mm LED, 36W, 2800 lumen, 6500K high brightness including suitable driver connection and testing on installation, complete all as specified and directed. MAKE:- Cat No. RC360BG2KED355-6500PSU OD WH, model : 'FULL GLOW' of Philips / Cat No. LCTAR3N-40-CDU, model : 'ARIION III of Crompton or techno-commercially equivalent model in Bajaj / Wipro

Sub main wiring complete with 2 runs of 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of rigid PVC conduit 25mm dia including conduit accessories and connecting terminal ends to DB's including providing 1 run of 6 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly, including taking down old sub main wiring of any type and any size and making good disturbed surfaces to match with existing, complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of PVC casing / caping shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Earthing complete with GI earth plate electrode 600mm x 600mm x 6.3mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth lead of 4mm dia by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 20mm dia GI pipe 'medium grade', watering pipe 20mm dia GI pipe 'light grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover (1:2:4) mix with 6mm dia nominal reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No.3 connected to earthing test point, including testing on completion, complete all as speciifed and as directed. NOTE:- (a) Rate quoted shall deemed to include cost of excavation in any type of strata, RFR and removal upto 50metre, PCC pit, funnel and RCC cover plate. (b) If earth resistance is not found satisfactory, till satisfactory test result comes, the same shall be redone by the contractor without any extra cost to department.

XLPE insulated, armoured heavy duty, screended, PVC bedded, electric cable with aluminium conductor, 1100 volts grade, ISI marked as per IS-7098, cross-sectional area 50 sq.mm 3.5 core, laid in trenches / on poles / walls (from existing LT panel to proposed LT panel) including provision of suitable hardware accessories, connecting up, testing on completion and commissioning, complete all as specified and directed. MAKE:- Havells / KEI / Gloster / Finolex / Plaza / Grandlay cables

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, tubular poles or laying of pipes, or for removal / laying of cables etc., not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft / loose soil, complete all as specified and directed.

Returning, filling in, in soils, including spreading, levelling, watering and well ramming in layers not exceeding 25cm., complete all as specified and directed.

Removing surplus excavated soils to a distance not exceeding 50metre and depositing where directed at a level not exceeding 1.50m above the starting point, complete all as specified and directed.

Spreading of natural, clean and dry river sand in trenches for cable protection, complete all as specified and directed. NOTE:- Punned thickness shall only be measured and paid.

Supply and lay burnt clay fly ash bricks class 'B', old size, designation 75, size 230mm x 115mm x 75mm, in trenches for cable protection, laid with length of brick equal to width of trench, complete all as specified and directed.

Taking down existing XLPE insulated aluminium conductor cable, any size, complete all as specified and directed. NOTE:- Excavation shall be measured and paid under respective item of this Schedule.

Steel tubing, light grade, ISI marked, galvanised including short lengths, laid in trenches / fixed to walls / ceilings or laid in floors / laid under road crossing for cables, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 40mm bore of pipe, including taking down existing unserviceable pipe along with its fittings, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and directed.

Glazed coloured ceramic tiles in vertical surface 450mm x 300mm x 7mm thick, laid in vertical surfaces such as skirtings / dado / risers to steps etc., set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including provision of 10mm thick backing coat in CM 1:4, complete all as specified and directed.

Non - skid Ceramic tiles 7 to 8 mm thick, joint free type, of size 400mm x 400mm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including provision of 15mm thick screed bed in CM 1:6, complete all as specified and directed.

Taking up or down 15mm bore, steel tubing and connections, , including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore, steel tubing and connections, , including cleaning for refixing or removal to store, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 15mm bore of pipe, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20mm bore of pipe, complete all as specified and directed.

Refixing of 15mm bore, old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), complete all as specified and directed.

Refixing of 20mm bore, old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), complete all as specified and directed.

Dismantling existing PVC / HDPE water tanks of capacity exceeding 250 but not exceeding 500 litres, complete all as specified and directed.

Rotational moulded HDPE water storage tanks (cylindrical vertical with closed top), 500 litre capacity (ISI embossed), double layered, hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.

Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, 20mm bore of pipe, fixed in repairs, including cutting / threading old pipes and provision of new fittings such as Tee, socket, elbow, union etc., as required, complete all as specified and directed.

Ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball secured for iron pipe of dia 20mm (minimum weight 210 gram), fixed in repairs, complete all as specified and directed.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, complete all as specified and directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, fixed in repairs, complete all as specified and directed.

Stainless steel soap dish holder, fixed to wall with chromium plated brass screws and PVC cleat, fixed in repairs, complete all as specified and directed. MAKE:- Cat No. F5003106 of CERA or techno-commerically equivalent model in any one of the make as approved by GE.

UPVC (SWR) floor trap, plain with chromium plated grating including jointing with solvent cement or PCC 1:2:4 type B1 (using 20mm graded stone aggregate) 75mm dia, including dismantling the damaged trap, complete all as specified and directed.

Corner glass shelf assembly (Radius shall be 225mm), of 5.5mm thick sheet glass, with brass chromium plated bracket guard and railing fixed to wall with chromium plated screws and PVC Cleat, fixed in repairs, complete all as specified and directed. MAKE:- Cat No. F5005102 of CERA or techno-commerically equivalent model as approved by GE

Towel rail brass chromium plated, 20mm dia, 'D' type, 600mm long, fixed with chromium plated screw and PVC cleat etc., fixed in repairs, complete all as specified and directed.

Angle valve, 15mm bore, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed15mm bore, fixed in repairs, complete all as specified and directed. MAKE:- Cat No. 0047 of L&K or techno-commercially equivalent model in any of the makes as approved by GE.

Stop valves, cast copper alloy, fancy type, chromium plated (concealed type), with chromium plated wall flange, screwed down, high pressure, long shank and exposed part kit with fitting sleeve, operating lever concealed part, screwed both ends for iron pipe or for unions and fixed, 15mm bore, fixed in repairs, complete all as specified and directed.

Bib taps (fancy type) with chromium plated wall flange, cast copper alloy, chromium plated, two-way with single knob, screwed down, screwed for iron pipe or for brass ferrule and fixed, 15mm bore, fixed in repairs, complete all as specified and directed.

Grating, round shaped, 125mm dia, of PTMT (minium weight 100 gram), fixed in repairs, complete all as specified and directed.

Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, 15mm bore, including taking down old pillar tap of any dia, complete all as specified and directed.

Overhead shower rose 65 to 90mm dia, brass chromium plated, with swivel joints with and including shower arm 230mm with wall flange, fixed in repairs, complete all as specified and directed.

PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle, jointing with and including provision of 32mm dia long / short flush pipe and connections to pipes and fixing of chain and pull, or lever, if any, fixed in repairs, complete all as specified and directed.

PVC connections 15mm size, of length 450mm, both ends having brass coupling nut and PVC washers, fixed in repairs, complete all as specified and directed.

Vitreous China wash down water closet pan (pedestal pattern) , white (excluding flushing cistern and flushing pipe), including plastic water closet seat and cover, white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device, UPVC (SWR) 'P' or 'S' trap and connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc., fixed in repair, complete all as specified and directed. NOTE:- Plastic seat cover shall be measured as Supply only under respective item of this Schedule.

Supply only plastic seat cover for water closet, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

Vitreous China wash hand basin, flat back, size 550mm x 400mm white, excluding taps, waste pipe, chain and plug and porcelain stopper but including brackets, including cutting for and pinning in ends of brackets or erecting stand, with out provision of Waste coupling of PTMT 32mm dia (half or full threaded) (Minimum weight shall be 45gms), waste pipe 32mm dia PTMT with inlet and outlet screwed for pipe including necessary packing, union and cap, fixed in repairs, complete all as specified and directed.

UPVC (SWR) pipe, 40mm dia including connectors conforming to IS:4985-2000 fixed with solvent cement joints, laid on floor or on walls, fixed as drain pipe in wash hand basin / sink, spount pipes in balconies etc., including taking down old unserviceable pipes, complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, 100mm dia, jointed in cement mortar and taking out of trenches, if required, complete all as specified and directed.

Cast iron soil, waste and vent pipes, 100mm bore of pipe, in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed.

Cast iron soil, waste and vent pipes, 75mm bore of pipe, in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification, with and including making good to jambs with CM 1:4 and finished the surface to match with the existing, complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification, complete all as specified and directed. MAKE:- (for Sl. item No. 101.00 and 102.00 here-in-before): Sintex / Rajshree plastic / Wood Forex, Indore

Sheet glass, frosted, on one side, 4mm thick, ordinary quality and glazing in squares not exceeding 0.5 sq. m in each pane with oil putty, fixed in repairs, complete all as specified and directed.

Sheet glass, 3mm thick, ordinary quality and glazing in squares not exceeding 0.5 sq. m in each pane with oil putty, fixed in repairs, complete all as specified and directed.

Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, 250mm long, complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section and fixed, 150mm long, complete all as specified and directed.

Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100mm long, complete all as specified and directed.

Aluminium handles, cast type, anodised, 150mm long, complete all as specified and directed.

Mild steel tubing 25mm dia with PVC coatingfor curtain rod, fancy type including PVC fancy type brackets (wall-to-wall or flush to wall) for securing the curtain rod, complete all as specified and directed.

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finishing the surface even and smooth with out using exta cement, but mixed with water proofing compound all as per manufacturers instructions, complete all as specified and directed. NOTE:- Water proofing compound shall be measured and paid separately under respective items of this Schedule.

Supply only integral water proofing compound, complete all as specified and directed.

Complete removal of existing treatment from surfaces of walls incuding pilasters, cornices etc., by scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots with wire brushes and removing existing loose particles etc., and applying two coats of weather-proof antifungal exterior emulsion paint over a self coat of primer over two coats of internal grade wall care putty (viz., 1.5mm thick in first coat and 1.0mm thick in second coat; however, the total thickness shall not be less than 2.50mm), finished even and smooth, complete all as specified and directed.

Preparation of previously untreated surfaces of brick, stone, concrete, asbestos cement or newly plastered surfaces of walls of any description over 10cm width or girth not otherwise described and applying two coat of acrylic emulsion paint over a coat of chalk whiting over two coats of internal grade wall care putty (viz., 1.5mm thick in first coat and 1.0mm thick in second coat; however, the total thickness shall not be less than 2.50mm), finished even and smooth, complete all as specified and directed.

Preparation of previously untreated surfaces of brick, stone, concrete, asbestos cement or newly plastered surfaces of walls of any description over 10cm width or girth not otherwise described and applying two coats of weather-proof antifungal exterior emulsion paint over a self coat of primer, finished even and smooth, complete all as specified and directed.

Preparation of wood or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Second class hard-wood in scantlings, clean sawn timber fixed, complete all as specified and directed.

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Creosote, complete all as specified and directed.

Paving tiles, exterior type, heavy duty, full body coloured, of size 300mm x 300mm x 8 to 9mm thick, in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including provision of 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.

Plain cement concrete 1:5:10, type E2 (using 40mm graded stone aggregate), in sub-bases of floors, 75mm thick, complete all as specified and directed.

Steel tubing, light grade, ISI marked, galvanised including short lengths, laid in trenches / fixed to walls / ceilings or laid in floors / laid under road crossing for cables, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 80mm bore of pipe, including taking down existing unserviceable pipe along with its fittings, complete all as specified and directed.

Exhaust fan 230 Volt 50 Hz single phase AC supply, 300 mm sweep with louvers complete with metal body powder coated with protective steel bird guard on wall of building with and including provision of 3 core 1.5 Sq.mm flexible cable from ceiling rose to exhaust fan including writing MES number on exhaust fan motor using synthetic enamel paint of approved tint, including making necessary holes in masonry walls and making good the disturbed surfaces to match with the existing, complete all as specified and directed. MAKE:- Model: Ventil Air-DS of Havells or techno-commercially equivalent model in Almonard / Bajaj / Usha / Khaitan.

MCB DB, SPN, double door, epoxy powder coated, factory made 4-way sheet metal enclosure with category of protection IP-42, 240V, with tinned copper 200Amp rated bus bar suitable for MCBs, with blank plates, fixed in repairs, complete all as specified and directed. MAKE:- Legrand / Havells / L&T / ABB

LED mirror light fitting with LED lamp, 9W, 6000K, decorative indirect up-down light for mirror and as well light application with extruded polycarbonate, environemntal friendly , energy efficient, complete with all accessories, pre-wired and mking connection with and including provision of three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length and testing on installation, complete all as specified and directed. MAKE:- Cat No. LUMILINEPLUSBS10WLED865SPCSS of Havells / Cat No. TRIM LINA LCTLN-10-CDL of Crompton or techno-commercially equivalent model in Bajaj / Wipro

LED, 18Watt tube light fitting, high efficient, batten surface / wall mounted with specially designed extruded aluminium housing, high optically efficient poly-carbonate diffuser, in-built electronic driver duly wired upto terminal block, power consumption less than or equal to 20W, luminaire lumen greater than or equal to 2000lm, system efficiency greater than or equal to 100lm/w, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC62471 & electrical insulation class 1, ingress protection IP 20, colour rendering index CRI > 80%, temperature range 0-50 degree centigrade, driver efficieny > 85% power factor > 0.90, THD < 20% as per IEC 61000-3-2, colour temp - 6500K, surge protection 2.5KV, 50000 burning hours (minium) as per L70 criteria, multi-stage isolated constant current operated driver with range 110-270V AC and safety extra low voltage safe level < 60V DC as per IEC Standard with LM70 & LM80 certification, complete all as specified and directed. MAKE:- Cat No. TRIM linea LCTLSNE-18-FOCDL of Crompton / Cat No. LHEXBLP7PN1W0218/ELITE LID PRIDE PLUS 18W of Havells or Cat No. BCLSB 18W of Bajaj or techno-commercially equivlent model in Philips

LED 35W high efficient LED streetlight, aluminium pressure die cast housing parts for long life, pure polyester powder coated dark gray housing, high purity, PMMA lenses for superior performance, toughened glass with silicon gaskets for IP 65 protection, driver cover designed to suit top maintenance, suitable for external pole dia upto 50mm, temperature range - 0 to 50 degree centigrade, CRI>70, driver efficiency >85%, power factor >0.95, THD<10%, colour temperature - 5700K, surge protection - 4KV in CM, 50000 burning hours, lumianire efficacy>92lm/W, with and including provision of GI pipe bracket 1.20metre long bent to shape required using 25mm bore dia GI pipe light grade with and including provision of clamps etc., complete all as specified and directed. MAKE:- Cat No. ENDURACITY LITE PLATPLUSSL35WLED757 SASY BOPC of Havells or techno-commercially equivlent model in Philips / Bajaj / Wipro / CG / Jaquar

Sub main wiring complete with 2 runs of 4 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of rigid PVC conduit 25mm dia including conduit accessories and connecting terminal ends to DB's including providing 1 run of 4 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly, including taking down old sub main wiring of any type and any size and making good disturbed surfaces to match with existing, complete all as specified and directed. NOTE:- (i) Two runs of 4 sq.mm copper conductor, one run of 4 sq.mm copper earth continuity conductor and one run of PVC casing / caping shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Taking down existing ceiling fan / exhaust fan, any sweep, by disconnecting carefully all electric connection and refixing the same after necessary repair work as required (such as cleaning all the serviceable parts thoroughly, reassembling the fan after testing for proper functioning), with and including provision of electrical wire 3-core 23/0.0076 copper conductor, including provison of one coat of synthetic enamel paint of tint same as that of exisitng, including wiring of MES No on fan motor, complete all as specirfied and directed. NOTE : The quoted shall deemed to be inclusive of every minor items i.e., nut, bolts, screws, lugs etc., which are faily required for the smooth functioning of fans.

Taking down existing geyser of any capacity, any type after disconnecting all electric and water supply connection, removing the geyser to E&M store yard for opening and dismantling the complete geyser, cleaning all the serviceable parts thoroughly, including descaling the geyser completely, replacing the defective / wornout parts / materials, reassembling the geyser after testing for proper functioning, including transporting to original location and re-fixing the same in position, reconnecting the geyser with electric and water supply line and testing, complete all as specified and directed.. NOTE : The quoted shall deemed to be inclusive of every minor items i.e., nut, bolts, screws, lugs etc., which are faily required for the smooth functioning of geyser.

Electric water heater (Geyser), storage type, of capacity 50 litre, BEE 5-star rated, PUF insulation, adjustable knob for temperature setting, with and including provision of heavy duty PVC connection pipe 600mm length with bronze nuts suitable for hot and cold water pipe lines and fixing to existing water supply lines, complete all as specified and directed. MAKE:- Model: Monza EC-H, Product Code: GHWHMESWH050 of Havells or techno-commercially equivalent model in V-guard / Racold / Crompton Greaves / Bajaj / Usha

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20-32Amp 240V, 10KA breaking capacity, 'C' series, fixed in repair, complete all as specified and directed. MAKE:- Legrand / Havells / L&T / ABB

Sheet metal enclosure for MCCB, double door (acrylic), TPN type 415V, with 200Amp rated bus bar, including provsion of MCCB 160Amp, 25KA rupturing capacity with therma magnetic release as incomer and 06 Nos MCB SP 6-32Amp 10KA breaking capacity 'C' series as outgoing, IP 43 degree protection, including provision of necessary blank plates and making necessary electric connection with lugs, complete all as specified and directed. MAKE:- Havells / Bajaj / Surya / Philips

Shivagya Engineering

M/S A P CONSTRUCTION

Vibha Enterprises