Minor repairs to Dr. B. R. Ambedkar (SC/ST students) study centre (Potato & vegetable research scheme) at UAS Dharwad

Minor repairs to Dr. B. R. Ambedkar (SC/ST students) study centre (Potato & vegetable research scheme) at UAS Dharwad

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:4 including cutting the patches in proper shape and replastering the surface of the wall includi...

Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08 percent and conforming to IS:15622, of approved brand & manufacturer, in ...

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...

Renewing Matti / Nandi wood battens in roof including making good the holes in walls, removal of rubbish to the dumping round with a lead upto 50 m including cost of materials, labour, complete as per...

Repairing door and window frames with available wood to the required size

Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboards.

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete: 125x64x1.90mm

Renewing glass panes, with wooden fillets wherever necessary. Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm)

Providing and fixing in position windows half paneled shutters at bottom and half glazed at top for window shutters with Honne wood stiles and rails of 35mm. thick, 75mm wide in two halves with panels...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as per specifications and as per directions of Engi...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC co...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Finishing walls with Acrylic Smooth exterior paint of required shade (Two coat applied at 1.67L/10 sqm over and including priming coat of exterior primer applied at 2.20 kg/10 sqm) with paint of appro...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...

Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...