For the Guarding work, replacement of bare conductor and fixing of Pole in 11 KV Line and LT Line at various place under business plan work in the area of EE, EUDD-III, Mathura in the jurisdiction of SE, EUDC, Mathura.

Amount

Safe Carriage with loading and unloading of following material from store center Mathura to work site.

11 mtr. Long ST Pole.

09 mtr. Long ST Pole

Other line material

Fabrication of Channel, angle and 11 KV Cross arm., LT Line and Guarding.

Digging of pit & erection of Double Pole made by 11 mtr.long ST Pole Including Fitting 11 KV etc.

Digging of pit & erection of Single Pole 11 mtr. long ST Pole Including Fitting 11 KV etc.

Digging of pit & erection of Stay rod with grouting cement sand and brick ballast including Nuzzling, binding Complete.

Stringing and sagging of ACSR Dog Conductor 11 KV Line.

Stringing and sagging of ACSR Weasel Conductor 11 KV Line.

Complete 11/0.4 KV, 100 KVA T/F

Complete 11/0.4 KV, 250 KVA T/F

Complete Jumpering of Double Pole including fixing of E Clamp , 11 KV Insulator with Pin, Disc Insulator with fitting, Danger Board, Barbed Wire, Number Plate etc.

Stringing and sagging of 02 no. G.I. wire for 11 KV line guarding with binding the arrows (Tillie) Distance approximate 3 mtr.

Complete chemical earthing of 11/0.4 KV 250/400 Distribution Transformer by digging pits 6” dia up to 3 mtr. deep including chemical filled pipe in between (pipe-in-pipe) ISI mark B Grade & connecting with G.I strip of size 50mm X 6mm with neutral/body of 11/0.4 KV distribution transformer to above pipe-in-pipe (PIP) and filling of chemical crystalline conductive mixture containing highly conductive material around the (pipe-in-pipe) up to 3 Mtr. including making of chamber at the top of the earthing. Other details are as below:- 1.Earth pipe material – mild steel, Galvanised. 2-Main Electrode diameter – 42.4mm. 3-Auxiliary Electrode pipe, Diameter – 76mm. 4-Wall Thickness of main Electrode :- 2.6mm. 5-Wall thickness of auxiliary Ist whole:- 3.2mm. 6- Length of earthing electrode (PIP):- 3 Meter.

Construction of M.S angle fencing of size (3M x3M x2M) around the plinth of 400/250KVA transformer and gap between the M.S angle should not be more than 65mm.

Fixing of heat shrinkable jointing kits for following size 11 KV XLPE cable 3x70 Sqmm.

Earthing Complete by M.S. Earth Road

Laying of LT AB Cable 3x120 Sqmm.

Fabrication of Trolley and fixing of Cable Jointing Kit, Cable laying, TPMO, Dropper and Other’s Material.

Supply of Tractor Trolley Hook

Fixing of LT Distribution Box

Fixing of LT Line for Clamp (Suspension & Dead End with I-Hook)

Re- Connection of Consumer Service Cable

Dismantling of 11 KV line conductor and LT Line Conductor.

Dismantling of ST Pole

Grouting of ST Pole

Safe Carriage with Loading and unloading of Dismantling Material from Work side to 132 KV S/S Store Center Mathura (ST Pole 15 no., Conductor Scrap, Iron Scrap)

LT PVC Cable 2x4 Sqmm. (Armoured)

JMHD INFRATECH

M/s Shri Balaji Traders