REPAIR/ MAINTENANCE OF INTERNAL WIRING IN GRD KUNRAGHAT NCC GYANGHAR UNDER GE AF GORAKHPUR

Amount

Taking down carefully (aluminum) point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

M&L for point wiring for one light/fan point controlled by one 5A switch using 1.5 sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia all as directed with sunken type pressed steel terminal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed.

All as per item No. 2 above but for one 5 Amps socket point controlled by one 5 Amps switch on same board.

All as per item No. 2 above but for one 5 Amps socket point controlled by one 5 Amps switch on independent board.

All as per item No. 2 above but for light point controlled by two two way switch.

All as per item No. 2 above but for one bell point controlled by one 5 Amps bell push.

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken modular type pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with modular top cover and plate including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item Nos 2 to 7 :- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface. (ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

S&F modular switch single pole 1 way, 1 module, 6 Amp complete all as specified and directed.

S&F modular socket out let multipurpose 6A -2/3 pin, SP 1 way 2 module complete all as specified and directed.

S&F modular socket out let multipurpose 6A/16A-2/3 pin, SP 1 way 2 module complete all as specified and directed.

S&F modular switch single pole 1 way, 1 module, 16 Amp complete all as specified and directed.

S&F modular switch single pole 2 way, 1 module, 6 Amp complete all as specified and directed.

S&F modular fan regulator 240 V electronic step type, 1 module complete all as specified and directed.

S&F modular Bell Push 6A SP 1 way, 1 module complete all as specified and directed.

S&F ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.

S&F Call bell ding dong , AC single pole 240 volts complete all as specified and directed.

Taking down carefully old and unserviceable sub main wiring of 2/3 runs or main-wiring of any size of aluminium conductor cable from any position including wood batten, PVC conduit, steel conduit, PVC Casing caping etc including making good disturbed surface of wall ceiling etc complete all as specified and directed.

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 1.50 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 1.5 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 1.5 sqmm conductor cable, 1 No 1.5 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 2.50 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 1.5 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 2.5 sqmm conductor cable, 1 No 1.5 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 4.0 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 2.5 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 4.0 sqmm conductor cable, 1 No 2.5 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 6.0 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 4.0 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 6.0 sqmm conductor cable, 1 No 4.0 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

S&F in replacement 20 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells Cat part No.LHEXBXPNIN1W020 or equivalent in Bajaj /CG.

S&F in replacement 9 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells Cat part No.LHEXBXPNIN1W009 or equivalent in Bajaj /CG.

S&F in replacement integral building security LED light fittings with pressure dia cast aluminium of 24 watts and including and connecting up ceiling rose and fittings with 3 core, PVC insulated multistranded copper conductor cable of 1.5 Sqmm complete all as specified and directed. Make:- BAJAJ Model No. BRLEP 24W LED or equivalent in Havells/CG.

S&F in replacement recess mounting LED luminaire of size 2' x 2' white 36 watt, 230 volts for POP ceiling with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. Make:- Havells Cat part No. PLUTONEO2X2PLR or equivalent in Bajaj /CG.

S&F in replacement LED lamps 9 watts complete all as specified and directed. Make:- Havells Cat part No. LHLDEUEEMC8R009 or equivalent in Bajaj /CG.

S&F in replacement factory made epoxy powder coated distribution board double door TP& N 4 ways (VTPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knock outs and suitable for one FP MCCB/MCB 100/ 63 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs) outgoings complete all as specified and directed.

S&F in replacement MCCB,4 pole, 100 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F in replacement MCB, 4 pole, 63 Amps current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F in replacement factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 6 SP MCBs as outgoings complete all as specified and directed.

S&F in replacement MCB, SPN, 32 to 40 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F in replacement MCB, SP, 10 to 32 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F in replacement sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

M&L for earthing complete as in replacement with galvanized steel earth plate 60cmx60cmx6 mm thick buried vertically in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to earth lead GI 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade, including protection pipe GI medium grade 15mm bore for earthing lead, wire mesh, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1, precast RCC cover using XPM reinforcement weighing not less 4kg/sqm in lieu of CI cover and frame all as shown in electric plate of SSR part-I (2009), including testing on completion all as directed.

M&L for earthing complete as in replacement with galvanized steel earth plate 60cmx60cmx6 mm thick buried vertically in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to earth strip GI 25x4mm by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade, including protection pipe GI medium grade 15mm bore for earthing lead, wire mesh, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1, precast RCC cover using XPM reinforcement weighing not less 4kg/sqm in lieu of CI cover and frame all as shown in electric plate of SSR part-I (2009), including testing on completion all as directed.

Repairing of unserviceable light point (normal/ flameproof), fan point, socket point 5A/15A, switches sockets, fan regulator, light fixtures any type lamp any type MCB DB's & all electrical accessories in day to day/door to door maintenance and making it serviceable in all respect with all replacement of any major part but including small length of wires (not more than 50cm) adhesive cable and other connected minor accessories by providing sufficient and skilled manpower. Work shall also include to check & removal of leakages in service connection /sub main of houses as and when directed. The scope also include cutting of existing Bakelite sheet to accommodate new wiring accessories like switches, sockets, fan regulators etc. Note :- (a) The rate quoted by the contractor for Each Job is deemed to be included consisting of minimum 3 complaints. (b) The contractor or his representative will take complaint from MES complaint Register through MES Job card (c) The contractor will made separate items register with location and signature of user (d) The contractor will maintain complete detail of JOB card and items involved with date and user signature (e) The ladder and T&P as required will be provided by the contractor (f) Risk factor will be the contractor's end (g) Material will be measured and paid separately in the relevant item here after.

Supply only in replacement electronic fan regulator 230 V, stepped type, socket type, complete all as specified and directed.

Supply only in replacement switch piano flush type single pole, one way 5 amps complete all as specified and directed.

Supply only in replacement switch socket combination multipurpose 5 pin 5/15 Amps single pole one way complete all as specified and directed.

Supply only in replacement switch piano flush type single pole, two way 5 amps complete all as specified and directed.

Supply only in replacement bell push 230V, complete all as specified and directed.

Supply only in replacement Call bell ding dong , AC single pole 240 volts complete all as specified and directed.

Supply only in replacement switch piano flush type 15 Amp single pole complete all as specified and directed.

Supply only in replacement socket out let 3 pin 15 Amp flush type complete all as specified and directed.

S&F in repairs LED light fitting 1x12 watt surface mounted LED slim down lighter in powder coated white finish with integrated electronic driver complete all as specified and directed.

S&F in repairs LED light fitting 1x9 watt IP 55 surface mounted LED Porch Light in engineering plastic housing with clear prismatic diffuser complete all as specified and directed.

Disconnecting, taking down & removing carefully the existing ceiling fan, exhaust fans, wall bracket fans, air circulating fans and pedestal fans etc. of any description, any sweep and from any position/ locations for repairs/servicing/numbering, dismantling & opening of the fans, checking serviceability of parts, overhauling by necessary cleaning, oiling & greasing, fixing the serviceable parts in position, removing & replacement of defective/ unserviceable parts, if any, with new parts, reassembling the fans, making necessary adjustment and proper alignment of blades, hanging/fixing the repaired fans in position, connecting to existing electric sources and testing at site to the entire satisfaction of the department complete all as specified and directed. Note:- (i) The replacement of defective/nonfunctional parts shall be measured & paid separately as “Supply only” under appropriate item of Sch ‘A’ and fixing charges for new items are deemed to be included under this item.

Supply only ball bearing No. 6200 to 6203 complete all as specified and directed. Make:-SKF/NRB/NBC/TATA

Supply only gun metal bush of any description and size to suit existing motor shaft complete all as specified and directed.

Supply only capacitor of capacity 2.5 mfd PVC body complete all as specified and directed. Make:- EPCOS/JYOTI/ USHA

Supply only capacitor of capacity 3.15 mfd PVC body complete all as specified and directed. Make:- EPCOS/JYOTI/ USHA

Supply only capacitor of capacity 4/6 mfd PVC body complete all as specified and directed. Make:- EPCOS/JYOTI/ USHA

Supply only complete fan hanging assembly set comprising with rubber reel, MS clamps, nuts, bolts with one lock hole and lock pins suitable for any type of fans & down rods complete all as specified and directed.

Supply only PVC insulated, flexible cable, twin core twisted of size 23/0.0076 with copper conductor in pieces for connecting fans complete all as specified and directed.

Supply only 300mm long down rod 15 mm dia, MS tube light grade, duly finished with powder coating of white colour, including necessary holes and threading etc. complete all as specified and directed.

Supply only 900mm long down rod 15 mm dia, MS tube light grade, duly finished with powder coating of white colour, including necessary holes and threading etc. complete all as specified and directed.

Taking out & removing old burnt-out winding of electric fans of any description and rewinding of fan motor with appropriate size super enameled copper wire including insulating material such as illumines paper, letherized paper, cotton tape, glass sleeving, insulating varnish etc testing at workshop and transportation to site, connecting and testing on full load to the entire satisfaction of the department for the following Fans:- Make of winding wire: Atlas/Finolex/Devi Dayal

All as per item No. 57 above but for rewinding of motor of ceiling fans 1200/1400 mm sweep.

All as per item No. 57 above but rewinding of motor of exhaust fans of 225/250 mm sweep.

All as per item No. 57 above but rewinding of motor of exhaust fans of 300/400 mm sweep.

All as per item No. 57 above but rewinding of motor of exhaust fans of 450 mm sweep.

All as per item No. 57 above but rewinding of motor of air circulating fan of 400 mm sweep.

All as per item No. 57 above but rewinding of motor of pedestal fan of 400 mm sweep.

Taking down existing worn out louvers of any description, in any position and supplying & fixing new louvers made out of MS sheet 22 gauge thick suitable for exhaust fan of 230/300mm sweep complete all as specified and directed. Note: The louvers shall be of shape, size and pattern as approved duly painted with two coats of synthetic enamel paint over a coat of red oxide primer.

All as per item No. 64 above but suitable for exhaust fan of 450 mm sweep.

M&L for painting of existing fans of any description (ceiling fan/exhaust fan/Air circulators/Wall mounted fans/Pedestal fan) with applying one coat of synthetic enamel paint (White) by spray machine including preparation of existing decorated surfaces of fans including engraving MES No. of fan in capital letters of height not less than 20 mm on fan body all as specified and directed.

S&F ceiling fan complete with all electronic fan regulator and accessories of capacity 230V, 1200 mm sweep, BEE 5 star rating complete all as specified and directed. Make: Havells, Model No. ES 50 Premium 5 or equivalent in Bajaj/Crompton.

Taking down geysers carefully of any type and make of capacity 25 ltrs after disconnecting water supply and electrical connection, opening of geysers for inspection of unserviceable parts followed by servicing overhauling after replacement of unserviceable component with cleaning of heating element and inner tank by de-scaling including assembling fixing in position, making all electrical & water supply connection, making functional and testing complete all specified and directed. Note: Component/spare part required for replacement shall be paid for separately under respective item here in after as supply only

All as per item No. 68 above but of capacity 50 ltrs.

M&L for painting of geyser 25 ltrs capacity after proper cleaning and filing of cavities with filler compound applying one coat of synthetic enamel white colour paint by spray machine including writing MES No. on geysers with black colour paint complete all as specified and directed.

All as per item No. 70 above but of capacity 50 ltrs.

Supply only in replacement heating element pin type 1.5 KW rating capacity 230 V, ISI marked complete all as specified and directed.

Supply only in replacement heating element pin type 2.0 KW rating capacity 230 V, ISI marked complete all as specified and directed.

Supply only in replacement heating element threaded type 1.5 KW rating capacity 230 V, ISI marked complete all as specified and directed.

S&F in replacement 3 core copper flexible cable of size 40/.0076 complete all as specified and as directed.

Supply only in replacement thermostat ISI marked for 25/50 Ltrs capacity geyser complete all as specified and directed.

Supply only in replacement power indicating lamp circular/rectangle type suitable for 25/50 ltrs capacity geyser complete all as specified and directed..

Supply only in replacement safety pressure/air lock valve suitable for geyser 25/50 Ltrs capacity complete all as specified and directed.

Supply only in replacement gasket with stud for aperture assembly of any type geyser complete all as specified and directed.

Supply only in replacement top or bottom cover for any make of geyser of 25/50 Ltrs capacity complete all as specified and directed.

S&F in replacement gun metal non return valve heavy duty 15mm dia complete all as specified and directed.

S&F in replacement gun metal non return valve heavy duty 20mm dia complete all as specified and directed.

S&F in replacement PVC connection pipe 450 mm long heavy duty with check nut for 15 mm dia pipe complete all as specified and directed.

S&F in replacement hot water supply PVC connection pipe of size 450mm long heavy duty with check nut for 15 mm dia pipe ISI marked complete all as specified and directed.

S&F in replacement terminal plate with screw for Geyser 25/50 Ltrs capacity complete all as specified and directed.

S&F in replacement plug top 3 pin, 15 Amp, 230 V complete all as specified and directed.

S&F in replacement GI union 15 mm dia medium grade ISI marked complete all as specified and directed.

S&F in replacement GI elbow 15 mm dia medium grade ISI marked complete all as specified and directed.

S&F in replacement GI nipple 100mm long, 15 mm dia medium grade ISI marked complete all as specified and directed.

S&F in replacement GI nipple 100mm long, 20 mm dia medium grade ISI marked complete all as specified and directed.

S&F in replacement 15mm bore steel water tubes "medium grade" galvanized with all fittings such as bends, elbows tee etc and fixed to walls and ceiling in floor complete all as specified and directed.

S&F in replacement bib taps 15 mm bore brass, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F, installation, testing of electric Water heater storage type geyser (with EPAC Inner Tank & ABS Body with Metallic Finish Color Panel) of capacity 25 litres suitable for single phase 230 Volts, AC, 50Hz, BEE 5 star rating complete with all mounting arrangement, Hot & Cold water connection pipe, 3 pin plug top etc as required at site complete all as specified and directed. Note:- Any disturbed surfaces of wall will be matched with existing colour surfaces. complete all as specified. Make: Model Pebble 25L of Make Havells or equivalent in V-Guard/Bajaj/ Racold

S&F exhaust fan single phase 230/240 volt AC 300mm sweep, 1400 RPM with painted louvers, metal body, including cutting holes of suitable size in wall, grouting of nuts and bolt etc required for fixing fan and making good to match the existing surface and making connection with twisted copper flexible wire 23/0.0076mm complete all as specified and directed. Make: Havells/Bajaj/CG.

Vijay Electricals

M/s Suresh Traders