IMPROVEMENT TO SPORTS INFRASTRUCTURE (PHASE II) AND PROVISION OF NEW SEWAGE LINE AT OFFICERS RESIDENCY MESS AT AF STN GWALIOR

Amount

Dismantling of Kota stone flooring of any description or thickness in floors, aprons etc laid bedded and pointed in any motar etc all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling,mass concrete etc complete all as specified.

M&L for PCC (1:2:4 )type B-1 using 20mm graded stone agg as in coping including weathering slightly rounded of chamfered angles & throating with and including necessary form work etc complete all as specified & directed.

M&L machine cut Kota stone slab flooring 20-25mm thick over 15 mm screed bed (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc all as specified and directed.

Dismantling wall and ceiling boards (fibre ,pulp ,insulation etc ) or insulation boards /slabs/ blankets ,any thickness , including cover fillets or aluminium grid frame work complete all as directed

M&L 4 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws fixed in ceiling flat or sloping complete all as specified and directed.

M&L GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sourrounding wall using nylon sleaves and screws at 450 mm centre to centre/intermidate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm c/c with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flanges of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips accross the intermediate channel at 457 centre to centre including hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long complete all as specified.

Taking down existing stainless steel railing and refixing in same opening including welding, grinding, polishing and fitting the same with necessary fitting as per site requriment etc all as specified and directed.

S&F for providingand fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc,, including welding, grinding, buffing, polishing and making curavture (where ever required) and fitting the same with necessary stainless steel nuts and bolts, tops complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangement etc all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of walls including cornices and applying one coat of 1mm thick wall care putty including suitable primer to obtain the desired surface of wall complete all as sepecified and directed by Engineer- in-charge.

M&L for two coats plastic emulsion paint on putty prepared surface of colour shade as approved by GE complete all as specified and directed.

Excavation in trenches n exc 1.5 M wide and exc 1.5 M deep but, n exc 3 M deep and getting out in soft/loose soil for shafts, wells, man holes and for sewage lines and foundation etc n exc 10 Sqm on plan all as specified.

M&L for brick work with sub class 'B' bricks old size, straight or curved on plan exc 6M mean radius built in CM 1:6 including demolition of brick work built in cement motor of any description complete all as specified and directed by the Engineer-in-Charge.

M&L providing cement concrete in copings and benching type B-1 1:2:4 (20mm graded aggregate ) complete all as specified and directed

Removing excavated material to a distance exc 500.00 M but n exc 1.50 Km and depositing where directed at a level n exc 1.50 M above starting point complete all as specified and directed by the Engineer -in-charge.

Returning, filling in including spreading leveling watering and well ramming in layers n exc 25 cm thick all as specified and directed by Engineer-in-Charge.

M & L for rendering 15 mm thick on fair faces of brick wall with mixing WPC as per manufacture direction by wt of cement finished fair & even in CM 1:4 complete all as specified and directed.

Supply only water proofing compound

S& F 200 mm bore reinforced concrete pipes class NP-2 laid and jointed in trenches complete with collars as directed by engineer in charge.

S& F 150 mm bore reinforced concrete pipes class NP-2 laid in trenches and jointed complete with collars complete all as specified and directed by engineer in charge

M&L Concrete bed PCC 1:4:8 type D2 to drain pipe 150mm dia incl. packing under and haunching against the sides of pipe complete all as specified and directed

M&L Concrete bed PCC 1:4:8 type D2 to drain pipe 200mm dia incl. packing under and haunching against the sides of pipe complete all as specified and directed

M&L Precast concrete cover slab type B1 1:2:4 using 20mm graded aggregated set in CM 1:4 complete all as specified and directed.

M&L salt glazed stoneware gully traps 150/100mm square or round mounthed type P setting and jointing with solvent cement complete

M&L for 100mm bore sand cast iron pipe,, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall incl testing of pipe etc complete all as specified and directed by Engr-in-Charge

All as per item No 25.00 here-in-before but 75mm bore of pipe

S & F CI bends bore of pipe 100mm with oval access doors all as specified and directed.

S&F CI bends bore of pipe 75mm with oval access doors all as specified and directed.

Cutting road in channels, grooves or rebates exc 15cm but n. exc 30cm girth and trimming surface with or without reinforcement complete all as directed

Demolition of PCC in ground floor & pavings (including floor tile ) n.exc 15 cm thickness below or above GL, including removing excavated material upto 2.5 KM distance and depositing where as directed, complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in floor finishing even and smooth without using extra cement in alternative bays etc, complete all as specified.

M&L Mild steel bars 10 mm dia and over, cut to length, bent to shape required including crancking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to TMT Bars.

M&L for construction of RCC Septic tank designed to carry sewage and sludge water, eexcavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 design mix in walls, base slab, baffle walls and roof slab including beam etc with vent shaft manhole opening with cover connection etc, complete with effective depth of 1.5 meter and overall depth m meter for 100 users complete all as specified and directed. Effluent from septic tank to be taken to nearby manhol/Sump/STP through shallow sewer. If this option is not available then it is to be disposed off in the soakage pit complete all as specified and shown drawings

M&L for construction of Soakage well, Excavation in ordinary soil, foundation in PCC 1:3:6, walls of honey combed and solid in M25 concrete including intercepting chamber, screen chamber, brick work in CM, RCC cover slab in M25, RR masonary/Filling with brick bats complete of size 3.00M dia x 4.50M deep etc complete all as specified and shown drawings

Taking down carefully existing unserviceable copper/ aluminium point wiring (Light ,Fan; Socket and Power) & in any position with and including pvc/steel conduit all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings call bell, lamp holders etc and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed. NOTE: Old fittings/fixtures/accessories like switch, sockets, lamp holders, regulators light fittings etc found in serviceable condition shall be removed carefully for reuse in the work and shall be paid for separately under appropriate item of Schedule `A’/BOQ.

Material and labour for point wiring for one light /fan/Exhaust fan/bell point controlled by one switch with using FRSLH1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduits /Casing caping (Medium grade) of size not less than 20 mm dia all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with laminated top sheet of 3 mm thick for housing of switchws, sockets, regulators etc including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. NOTE :-(I) The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & caping of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'/BOQ. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers

Description all as per item No 36.00 here-in-before but point wiring for one 5 pin socket outlet, on same board

Description all as per item No 36.00 here-in-before but point wiring for one 5 pin Switch socket combination on independent board

Description all as per item No 36.00 here-in-before but One 3 pin socket 15 Amp independent with PVC insulated and unshethed copper stranded conductor of size 2.5 Sqmm including 1.5 Sqmm PVC insulated and unsheathed copper conductor for continuous eathing

S&F Modular switch flush type single pole one way 6 Amps,1 Module 240 volts, white ivory finish Complete all as specified and directed.

S&F Modular flush type switch socket combination 2/3 pin 6 Amps,2 Module 240 volts, white ivory finish Complete all as specified and directed.

S&F Modular type socket outlet 2 in 1, 2/3 pin, 6 Amps,2 Module white ivory finish Complete all as specified and directed..

S&F Modular type socket outlet 2 in 1, 2/3 pin, 6/16 Amps,2 Module white ivory finish Complete all as specified and directed..

S&F Modular metal flush box ,3 Module all as specofied and directed.

S&F Modular metal flush box ,4 Module all as specofied and directed.

S&F Modular metal flush box ,6 Module all as specofied and directed.

S&F Modular white cover plate with frame ,2 module all as specofied and directed.

S&F Modular white cover plate with frame ,3 module all as specofied and directed.

S&F Modular white cover plate with frame ,4 module all as specofied and directed.

S&F Modular white cover plate with frame ,6 module all as specofied and directed.

M&L for ceiling rose surface Bakelite two to three terminal, 18 x 50 mm complete all as specified and directed..

Supply and Fixing electronic modular white fan regulator 120W-2 module single phase ,230 volt, complete all as specified and directed..

Supply & Fix decorative slim linear LED tube light fitting 01x20 watt light with co extruded polycarbonate body, environmental frendly, energy efficient ready to use pack with all accessories including 01 No 20 watt tube rod and connecting the same to ceiling rose with using copper conductor 24/0.20 flexible PVC sheathsd and fixing arrangement for fixing the light fitting to wall/ roof surface complete all as specified & directed by Engineer in-charge

Supply and fixing Street/Security light fittings 1X35W new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic cover suitable for pole dia O 40mm(Max) with complete (40 mm GI pipe light grade ),clamp,nut-bolt and washers all directed by Engineer-in-Charge.

Dismaintling & Taking out MCB DBs VTPN with all MCB's/Isolator & metal clade box any size , any type and capacity complete all as specified and directed..

Supply and fixing of sheet metal enclosure Double door for DB’s 12 way 240 volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires complete all as specified and directed..complete all as specified and directed.

Supply and fixing of sheet metal enclosure Double door for DB’s 8 way 240 volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires complete all as specified and directed.

Supply and fixing of sheet metal enclosure Double door for DB’s 4 way 415 volts with 200 Amps rated bus bar for TPN supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires complete all as specified and directed.

Disconnecting and taking down old unserviceable MCCB/DBs VTPN Unit of any description and in any position and Supply and fixing factory made epoxy powder coated distribution board TP & N 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts including provision for housing MCCB in the incoming and MCBs in the out going complete all as specified & directed conforming to IS : 8623(NOTE: Old existing MCCB DB's VTPN of any type retrieved from the site shall be deposited in MES store yard as directed.

Dismaintling & Taking out MCB's/Isolator/MCCB any size , any type and capacity

S&F MCB single pole 6 to 32 Amps, 10 KA ,240 Volts complete all as specified.

S&F MCB Single pole and neutral 40 to 63 Amps, 'B' Series 240 Volts complete all as specified.

Supplying & fixing MCB, 40 to 100 Amps, 50Hz, 415 Volts with rupturing capacity 10 KA 'C' curve complete all as specified & directed.

Supplying & fixing MCCB, 3 pole, 25 to 100 Amps, 50Hz, 415 Volts with rupturing capacity 16 KA with thermal magnetic release and adjustable overload setting having type DPX 160 fixed in distribution board, complete all as specified & directed.

Disconnecting & taking up or down unserviceable sub main wiring of aluminium/Copper conductor with two run of single core cable and one run of single core earth cable of any description, any size & in any position including taking out existing conduits of any description and making good the disturbed surfaces to the existing surfaces all as specified and directed. NOTE: Two run of single core PVC cable with one run of earth conductor and coduit shall be measured as one unit.

M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm of voltage rating upto and including 1100 Volts grade in and including conceled /casing caping PVC conduit, med grade of size not less then 25 mm bore along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 4 Sqmm as earth continuity conductor all as specified and directed. NOTE : (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface Complete all as specified and directed.

All as per item No 66.00 here-in-before but 6 Sqmm and 6 Sqmm earth wire with PVC conduit 25 mm dia med grade Complete all as specified and directed..

M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB of capacity 20 Amps, 240 Volts complete fixed on wall by provisioning of suitable sizes of MS strips, nuts, bolts and washers taking down of AC box all as required and directed by Engineer-in-Charge.

Dismantling and taking down earthing material comlete all as specified and directed.

M&L for earthing complete with MS Galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level including necessary excavation, earth work ,charcoal, salt etc and connected to GI earthing lead wire 4 mm dia by means of GI bolt nuts check nuts washers etc and 20 mm dia GI light grade watering pipe with funnel, wire mesh etc including PCC (1:3:6) type C-1 using 20 mm graded stone aggregate earth pit with 40x40x6 mm mild steel angle iron frame, RCC cover (1:2:4) type B-0, 50 mm thick reinforced with 8 mm dia round bar @100 mm centre to centre both ways with mild steel handle 12 mm dia, plastering 12 mm thick in cement mortar (1:6) internally and upto 150 mm below ground level externally, and GI earth lead wire 4 mm dia and 15 mm dia GI protection pipe medium grade from earth plate to test point upto 7.5m length all as shown in electrical plate No 3 of SSR Part -I 2009 and connected to earth test point including testing complete all as specified & directed.

S&F in replacement 35/36 W LED recess softline luminaire suitable for armstrong/grid ceiling with high brightness LEDs and PMMA extruded diffuser giving glare free light and good aesthetic appeal. Fixture size 595x595x70mm complete with LED tube with driver and all accessories specified and directed by Engr -in- Charge.

M/S NIRMAL SINGH DHANJAL

Lall Electronics

RADHA MADHAV CONSTRUCTIONS

JNK BOND

m/s vikash Engineers

M/S YOGANSH CONSTRUCTION CO.

NITIN TRADERS