Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹52.8 LAccepted-AOC | ₹52.8 L | 1 | Accepted-AOC Lowest-1 |
| 2 | 2₹53.4 L+₹58,818.60 (1.11%)Rejected-AOC AMBALA CANTT | ₹53.4 L+₹58,818.60 (1.11%) | 2 | Rejected-AOC Lowest-2 |
| 3 | 3₹54.7 L+₹1.9 L (3.62%)Rejected-AOC | ₹54.7 L+₹1.9 L (3.62%) | 3 | Rejected-AOC Lowest-4 |
| 4 | 4₹54.7 L+₹1.9 L (3.57%)Rejected-AOC | ₹54.7 L+₹1.9 L (3.57%) | 4 | Rejected-AOC Lowest-3 |
Tender Value
Refer Docs
EMD Value
₹1.0 L
Closing Date
28 Jun 2021, 3:00 pmClosed
Executive Engineer
PHED Office Fatehabad
Tamaspura Under Provide JJM
2021_HRY_174729_1
Tamaspura Under Provide JJM
Open Limited
Civil Works
Works
90 days
Tamaspura
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,000
Yes
₹1.0 L
Yes
4 Aug 2021
7 Jun 2021
28 Jun 2021
7 Jun 2021
28 Jun 2021
7 Jun 2021
Amount
N.S. Item
Supply & erection of Horizontal spindle split casing type puming sets minimum Four (4) Star rating duties coupled to AC squrrel cage induction type motor with 1440 RPM, 3 phase 50 Hz and accessories as described in Schedule No.II complete in all respect with priming arrangement with complete base frame. (Raw Water Pump set 1000 LPM 12 Mtrs Head)
Supply & erection of Horizontal spindle split casing type puming sets minimum Four (4) Star rating duties coupled to AC squrrel cage induction type motor with 1440 RPM, 3 phase 50 Hz and accessories as described in Schedule No.II complete in all respect with priming arrangement with complete base frame. (Clear Water Pump set 1000 LPM 40 Mtrs Head)
Supply and fixing following CI D/F pipe and specials/ bell mouth/ including cost of joining materials laying jointing, refilling of including making adequate support of masonry/ concrete for delivery and suction pipe from bell mouth in collecting tank upto the rising main laid by the department as per plan shown from the foundation wall of pump chamber for all the raw water and clear water pumping sets at water works in position as per specification given in schedule No.II. A) Detail of pipe and specials CI, D/F pipes 100 mm i/d
Supply and fixing following CI D/F pipe and specials/ bell mouth/ including cost of joining materials laying jointing, refilling of including making adequate support of masonry/ concrete for delivery and suction pipe from bell mouth in collecting tank upto the rising main laid by the department as per plan shown from the foundation wall of pump chamber for all the raw water and clear water pumping sets at water works in position as per specification given in schedule No.II. A) Detail of pipe and specials CI, D/F pipes 150 mm i/d
(A) Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm having following items. (A) For Raw Water Pump set 1000 LPM 12 Mtrs Head 2 Nos. a) Main switch as required 2 No.(L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 volt 1 No.(AE/KAPPA/L&T) C) Amp meter 100X100mm range 0 to 100 Amp 2 Nos. (AE/KAPPA/L&T) D) CT 100/ 3 Nos. (AE/KAPPA/L&T) E) VSS 1 No.& ASS 2 No. each of approved make F) SPP 2 No. of approved make g) Motor starter, Star delta 2 No.for 1000 LPM 12 Mtr H) Capacity KVAR as per site requirement 2 No. I) Indicating Lamp - One Set J) Change Over switch as required = 1 No.
(B) Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm and 400 mm deep having following items. (B) For Clear Water Pump set 1000 LPM 40 Mtrs Head 2 Nos. . a) Main switch as required 2 No.(L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 volt 1 No.(AE/KAPPA/L&T) C) Amp meter 100X100mm range 0 to 100 Amp 2 Nos. (AE/KAPPA/L&T) D) CT 100/ 3 Nos. (AE/KAPPA/L&T) E) VSS 1 No.& ASS 2 No. each of approved make F) SPP 2 No. of approved make g) Motor starter, Star delta 2 No.for 1000 LPM 40 Mtr H) Capacity KVAR as per site requirement 2 No. I) Indicating Lamp - One Set J) Change Over switch as required = 1 No.
Supplying erection, testing of ISI marked copper wire for 4 Nos. motors with under ground system in PVC and flexible pipes copper wire size 6 sq. mm complete in all respects with accessories like thimble etc. complete in respects.
Supplying erection, testing of ISI marked copper wire for 2 Nos. motors with under ground system in PVC and flexible pipes copper wire size 10 sq. mm complete in all respects with accessories like thimble etc. complete in respects.
Providing & fixing Exhaust fan 18" i/d (450 mm) complete with suitable GI sheet of apporved make complete in respect.
Providing & Fixing of Ceiling Fan 1400mm (56") With Speed ajuster of reputed make (Make Crompton, usha bajaj orient) Complete in all respect
Providing & Fixing of Suitable Floating arm along with Swlvel bend as per required specification approved by Engineer-In- Charge (200mm i/d) Complete in all respect.
Supply erection testing of reputed make LED light 100 watts with fittings and accessories complete in respect.
Less Credit of Old Pumping set (Raw Water = 5.00BHP x 800 LPM x 12 M)
Less Credit of Old Pumping set (Clear Water = 12.50BHP x 800 LPM x 40 M)
Bidder Name
Amount
Sandeep Kumar Contractor(GSTN-06AUPPK6008B1ZV)
JAI PARKASH GARG(GSTN-NA)
AJIT KUMAR KAJLA AND COMPANY(GSTN-NA)
Sh. Balbir Singh Contractor S/o Sh. Joginder Singh(GSTN-NA)
AJIT KUMAR KAJLA AND COMPANY
Sh. Balbir Singh Contractor S/o Sh. Joginder Singh
JAI PARKASH GARG
AJIT KUMAR KAJLA AND COMPANY
Sandeep Kumar Contractor
Sh. Balbir Singh Contractor S/o Sh. Joginder Singh
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .