Labour charges for foundation, fabrication and erection of all equipments and earthing of equipment supply of MS materials for introduction of 110 / 33 KV ratio with 1 16 MVA Power Transformer at Singampunary 110/11 KV SS in Sivaganagai EDC

Amount

Clearing the site with scrub jungle

Earth work excavating, depositing on bank with an initial lead of 10m and lift of 2m in a) Hard stiff clay, stiff black cotton, hard red earth, shales,murram,gravel,stoney earth and earth mixed with small size boulders

Earth work excavating, depositing on bank with an initial lead of 10m and lift of 2m in b) Soft disintegrated rock, latterite soft rock or kankar not requiring blasting

Earth work excavating, depositing on bank with an initial lead of 10m and lift of 2m in c) Earthwork excavating, depositing on bank with an initial lead of 10m and lift of 2m in medium rock and dense medium rock not requiring blasting

PCC 1:3:6 using 40mm HBS jelly including cost of all materials, lead,lift etc., complete without form work.

PCC 1:3:6 using 40mm HBS jelly including cost of all materials, lead,lift etc., complete with form work

PCC 1:2:4 using 20mm HBS jelly including cost of all materials, lead,lift etc., complete with form work

Brick Work with CM 1:6 using second class brick 9"*43/8"*23/4" including cost of all materials labour lead lift etccuring etc., complete

Plastering with CM 1:3, 12mm thick including cost of all materials, lead, lift, curing etc., complete

Labour charges for painting of RCC poles, plinths of structures etc., with two coats of snowcem over one coat of white cement including cost of paint and other materials, lead, lift, curing etc., complete

Labour, machinery, Consumables for the Fabrication for steel structures(MS Chequered plate 6mm) Heavy section (above 14 kg/m)

Labour, machinery, Consumables for the Fabrication for steel structures(MS Chequered plate 6mm) Light section (below 14 kg/m)

Labour for the Erection of the Fabricated Steel Structures Heavy section (above 14 kg/m)

Labour for the Erection of the Fabricated Steel Structures Light section (below 14 kg/m)

Supply of paint of reputed make and Labour,consumables for first primer coat using red oxide Paint and first finish coat of Painting using Aluminium Paint including consumables, after proper surface preparation using appropriate machinery to remove rust/scales etc as directed by the field engineer .

Supply of paint of reputed make (ie Asian,Dulux,Nerolec paint) and Labour for Second coat of Painting using Aluminium paint including consumables.

Labour Charges for Providing grouting pocket/Placing grouting bolt by template for breaker 110KV structure foundation as directed by the field engineer

Labour, machinery, consumables for fabrication, erection of earrthmat, earth connection (including Green colour painting), earth electrode, earthspike (including sharpening of earth spike). As directed by the field engineer.

Labour for excavating and refilling of earth /trench for earthmat, cable, etc., of any size/depth narrow excavation as directed by the field engineer. Normal clay / hard gravel soil

Labour charges for providing earth spike with G.I pipe including fabrication of base frame,painting and fixing as per departmental specification,excluding cost of G.I pipes,M.S Flats,base angles., etc.

Providing Earth bore 140/150 mm dia using power rig or 100/125 mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth Pits with supply and providing of Bentonite powder(Sodium Bentonite) 5Kg /Mtr depth of the bore mixed with low resistivity earths as directed by the field Engineer. (Earth to be supplied by the contractor).

Supply and providing of 450-600mm dia 300mm height 36mm thick cement collar with top cover for idrntification of earth electrode location as directed by the field Engineer

Fabrication,Supply and fixing of earth pit detail board including the cost of 20 SWG CR sheet,10mm RTS Rod, T & P, etc., complete.

Labour for erection of Breaker using crane arranged by the Contractor including the cost of gada cloth taflan tape and other consumables including support structure providing holes, gas filling wherever necessary as directed by the field engineer. 33/11 KV Breaker

Labour for erection of Breaker using crane arranged by the Contractor including the cost of gada cloth taflan tape and other consumables including support structure providing holes, gas filling wherever necessary as directed by the field engineer. 110 KV Breaker

Labour for erection of Measurement transformers, reactor units, using Crane arranged by the Contractor including providing holes wherever required as directed by the field engineer. 33KV CT & PT

Labour for erection of Measurement transformers, reactor units, using Crane arranged by the Contractor including providing holes wherever required as directed by the field engineer. 110 KV CT

Labour for erection of Isolators with proper allingments including accessories, Meggering and cost of consumables and lubricants and as directed by the field engineer. 33 KV AB Switch

Labour for erection of Isolators with proper allingments including accessories, Meggering and cost of consumables and lubricants and as directed by the field engineer. 110 KV AB Switch without earth

Labour for erection of LAS station/Distribution type single unit including monitors & accessories. 110 KV LAS

Labour for erection of LAS station/Distribution type single unit including monitors & accessories. 33 KV LAS

Labour for the Erection of Strung bus and all related hardwares, fittings, clamps including Meggering, hoisting of insulators, and consumables and as directed by the field engineer. Upto 33 KV Single Conductor Strung Bus/phase

Labour for the erection of Insulator single pole stack for supports Uprights / Underhang including Meggering & other consumables and as directed by the field engineer. 110 KV .

Labour for the erection of Insulator single pole stack for supports Uprights / Underhang including Meggering & other consumables and as directed by the field engineer. 33 kv support

Labour for the erection of Busbar including suitable Modifications of End Clamps, providing holes wherever necessary as directed by the field engineer. 50 mm (1 length)

Labour for the erection of Busbar including suitable Modifications of End Clamps, providing holes wherever necessary as directed by the field engineer. 75 mm (1 length)

Labour for the Erection of Jumper / Droppers using Moose / Zebra / panther Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field engineer.

Labour for the Erection of Control Panels includings consumables as directed by the field engineer. Simplex type/AC/DC/C&R Panel of Non-Grid type, Battery Chargers, Single feeder Control/Relay Panels of Grid type (P&C)

Labour for erection of cable in duct/trench/clamping on structures - neat laying in the ducts with identification Tags,Plastic token in all duct corners for easy identification of cables. including fabrication of clamps and fixing at uniform intervals as directed by the field engineer. Up to 8 Core

Labour for erection of cable in duct/trench/clamping on structures - neat laying in the ducts with identification Tags,Plastic token in all duct corners for easy identification of cables. including fabrication of clamps and fixing at uniform intervals as directed by the field engineer. Above 8 Core

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer. 16/19mm

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer. 22/25 mm

Supply and termination of cable core end dressed neatly including the cost of cable socket (lug) ferrules, sleeves, tags, ties, stropes, etc., as directed by the field engineer.(No.of core ends in unit of 1000).

Supply and Erection of 5m Grouting type lamp post of B class MS pipe (3 inch dia for 3mtrs &2.5inch dia for 2mtrs)including single/double fitting fixing arrangements,1 inch dia B class pipe arms,yard light box fixing flat and one coat of redoxide and Two coat of Aluminium paint.

Supply and Erection of yard light fuse unit mounting box of size 200x200x150mm (BxHxD) out of 18 SWG (1.22mm) G.I Sheet as per drawing , provided with 16/20A rewirable Porcelain Fuse carrier unit, 16 A Bakelite connenectors including its cost materials, consumables, VAT, frieght, etc and as directed by the fiels engineer on site requirements. (The box shall be vermin proof,shall be provided with sturdy hinges,with provision for cable entry and locking arangements).

Supply and Erection of 1x72W , 240V LED street light Aluminum case fitting ISI Make as per direction of site engineer . (inclusive of all taxes).

Supply of lower end 60 w ( orbit ISI Brand

Labour charges for laying of control/ yardlight cable by digging cable trench of size 0.3m x 0.6m filling with for a depth of 0.2m, covering with one layer of country bricks and refilling with excavated earth and including cost of sand and bricks,etc.

Fabrication, supply and fixing of C.T/P.T junction box of size 400x300x150 mm of 16 SWG(1.6mm) M.S.sheet with primer coat paint, Supply,Fabrication and erection of Box fixing Flats using 50x8 MSF, Supply and Fixing of 25x3mm² Braided Flexible Copper loops to box earth., Two coat of Enamel Paint, provision for fixing terminal blocks/MCBs including consumables, VAT, fright, etc., as directed by the field engineer on site requirements.(The box shall be vermin proof shall have sturdy hinges, & locking arrangements)

Fabrication, supply and fixing of AC junction box of size 535x310x127mm of 18 SWG M.S Sheet including HRC Fuse unit-18nos should be fitted with base, consumables, VAT, fright, etc., asTRANSCO standard and directed by the field engineer on site requirements.(The box shall be vermin proof shall have sturdy hinges, & locking arrangements)

Supply and laying,fixing in position of 10 kg/sqcm pressure 25mm dia PVC pipe (Make Appolo,Usha,Chemplast etc) including L bend,Tee,PVC Tape for Earth pit watering as directed by the field engineer on site requirements..

Labour charges for writing details in any finished surface/board including cost of enamel paints and other consumables as directed by the field engineer.

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 40 mm M.S Round Rod

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 65x 10 mm M.S.Flat

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 50x 8 mm M.S.Flat

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. M.S Chequered plate 6mm

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 125 x 65 mm M.S.Channel

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 100 x 50 mm M.S.Channel

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 100 x 100 mm M.S.Channel

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 65 x 65 x 6 mm M.S.Angle

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 50 x 50 x 6 mm M.S.Angle

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 200x100mm RS Joist

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. 4-Bolt Tension fitting

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. Switch End Clamp for Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. Switch End Clamp for 75mm Bus

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. Switch End Clamp for 50mm Bus

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. T clamp for Zebra to Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. T Clamp for 75mm Bus to Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. T Clamp for 50m Bus to Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. PG Clamp for Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. Free End clamp 75mm

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. Free End Clamp 50mm

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. 75mm Corona Bell

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. 50mm Corona Bell

Supply of "B" class G.I.pipe for extension of tandem/down pipe for A.B.Switches and for any other work required as directed by the field engineer. 25 mm Dia

Supply of "B" class G.I.pipe for extension of tandem/down pipe for A.B.Switches and for any other work required as directed by the field engineer. 40mm Dia

Supply and Provision of M8,M10,M12&M16 (full /Half thread) G.I Bolt and Nuts of Various Sizes including Plate /Spting washers as required and as directed by the field Engineer

Supply of Eye bolt 18" size (16 mm) with 2 nuts per unit

Supply and fixing of Terminal blocks as directed by the Field Engineer.Disconnecting type(Link Type)

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation 110KV Isolators

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation 33KV Isolators

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation Cable/Conductors including cutting and rewinding

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation BusBars

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation 110kv breaker

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation 33KV Breaker

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation 110KV CT/LAS/PT

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation 33KV CT/LAS/PT

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation 110KV insulator

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation 22/11KV Insulators

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation AC/DC/C&R Panels for Non grid type

Suppl;y and Fixing of Godrej 6lever navtol lock with triplicate keys for AB Switches and for any other purpose including the cost of ring and key token as directed by the fiels Engineer

Supply and fixing of key chain ,ring and identification key token for A.B Switches as directed by the field Engineer

Supply & providing of fire buckets 10Ltrs capacity

Supply and fabrication of sand drums,(size of 580mm dia & 420 mm height)with conical cover made of G.I sheet to be provided with handle including the cost of barrel,G.I sheet ,sand,paint and other consumables as directed by the field engineer.

Rubber mat of size 2000x1000x10mmThickness 0.10m

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

K.SARAVANAKUMAR

C ILANGAMANI

ROBERT WILSON

S.KUMARAPANDIAN