Repairing of Type-III/3, T-III/8, T-III/9 Quarters at Old Colony, Loktak.

Amount

Repairing to plaster i/c cutting & the patch in proper shape & preparing the surface of the wall complete. (12.1.1) With cement mortar 1:4 (1 cement: 4 fine sand).

Neat Cement Punning.

Removing white or colour wash by scrapping and preparing surface smooth i/c necessary repair to scratches etc. complete.

Applying one coat of cement primer of approved quality on wall surface.

Distempering with oil bound washable distemper of approved quality (one or more coats) to give an even shade on old work.

Finishing walls with water-proof cement paint of approved quality on new work (two or more coats) to given an even shade.

Painting (two or more coats) with synthetic enamel paint of app\roved quality of black or chocolate colour on wood work to give an even shade.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S 15622 off approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement:4 coarse sand) including grouting the joint with white cement & matching pigments etc. complete. 600x600 mm (single charge) Non-Branded.

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S 15622 of approved make in all colours & shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. Size of tile 600x600 mm (Single charge) Non-Branded.

40mm thick cement concrete flooring (1 cement: 2 coarse sand: 4 stone aggregate 20mm & down gauge) finished with a floating coat of neat cement.

Providing & fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120gms/sqm (both side inclusive)as per IS:277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall /partition with the help of rawl plugs at 450mm centre, with 25mm long dry wall screws @230mm interval, including fixing of gypsum board to 12.5mm thick tapered edge gypsum plain board conforming to IS:2095-Part I.

Providing and fixing white vitreous china pedestal type water closet( European type) with seat and lid,10litre low level white P.V.C flushing cistern including flush pipe, manually controlled device( handle lever) conforming to IS:7231,with all fittings and fixture complete including cutting and making good the wall and floor wherever required. WC Pan and ISI marked white solid plastic seat and lid.

Providing & fixing stainless steel A ISI 304(18/8) kitchen sink as per IS:13983 with C.I brackets, 15mm CP Brass pillar tap and stainless steel plug 40mm, including painting of fittings and brackets cutting and making good the walls wherever required: Kitchen sink without drain board 610 x 510 mm bowl depth 200mm.

Providing & fixing 600x20mm CP brass towel rail complete with CP brass brackets fixed in wooden cleats with CP Brass.

Granite stone slab flooring over 20mm (average) thick base of cement mortar 1:6 ( 1 cement :6 coarse sand) laid & jointed with grey cement slurry including rubbing and polishing complete with Granite slab 12.5 mm thick slab j) Black Onyx (30x60cm).

Add EPF @ 3.25%

Add CESS @ 1%

Add GST @ 18%

M/S R.K.YAISKUL SINGH

M/S LAKRA AMARJIT SINGH