DETENTION ROOM WITH BATHROOM AND TOILET FOR WOMEN MP, WOMEN RECTS (AVS) FAMILIES AND CHILDREN AT MI ROOM CMP CENTRE AND SCHOOL AND SPL REPAIR/ REPLACAMENT OF AIR CONDITIONERS AGAINST BER UNDER GE (SOUTH) BANGALORE

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc. or for shafts,wells,cesspits,manholes,pier holes,etc. and n.exc 10 sqm on plan not exceeding 1.5 M depth and getting out in soft/loose soil and disposal of surplus soil upto n.exc. 50m distance complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed.(Note:Quantity required for E/M items also measured under this item)

Spreading and levelling in layers not exceeding 25 cm thick and well ramming including watering as required complete all as specified and as directed.

M & L Plain Cement Concrete 1:4:8 Type D-2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete complete all as specified and as directed.

M & L Reinforced Cement Concrete 1:1 1/2 :3 Type A-1 using 20 mm graded crushed stone aggregate in foundations including rafts, footings and mass concrete complete all as specified and as directed.

M & L Reinforced Cement Concrete 1:1 1/2 :3 Type A-1 using 20 mm graded crushed stone aggregate) in columns complete all as specified and as directed.

M & L Reinforced Cement Concrete 1:1 1/2 :3 Type A-1 using 20 mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

Reinforced Cement Concrete1:1 1/2 :3 Type A-1 using 20 mm graded crushed stone aggregate) in slab supported on walls and beams and shelves like complete all as specified and as directed.

Reinforced Cement Concrete1:1 1/2 :3 Type A-1 using 20 mm graded crushed stone aggregate) in chajjas complete all as specified and as directed.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

All as per item no.10 above but 6 to 8mm dia complete all as specified and as directed.

Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Form work to sides of fdn and PB for rough finished surfaces of concrete complete all as specified and as directed.

Form work to columns for fair finished surfaces of concrete complete all as specified and as directed.

Form work to sides and soffits of beams (roof beam) for fair finished surfaces of concrete complete all as specified and as directed.

Form work to sides and soffits of suspended slab for fair finished surfaces of concrete complete all as specified and as directed.

M&L treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified.

M&L Hardcore broken stone of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed

M&L 75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded crushed stone aggregate) in sub base of flooring complete all as specified and as directed.

M&L 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in floorings including finishing the surface even and smooth using without extra cement complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry made of PCC (1:3 :6) type C-1 using 20mm graded crushed stone aggregate with solid blocks exc.10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed.

S&F non-skid coloured ceramic joint free rectified tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15 mm thick in CM 1:6 etc complete all as specified and as directed.

S&F ultra charged Vitrified coloured ceramic tiles ( light shade) 8-9 mm thick ( Square/rectangular) polished area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white /coloured cement to match over a screed bed of 15 mm thick in CM 1:6 etc complete all as specified and as directed.

S&F ultra charged Vitrified coloured ceramic tiles ( light shade) 8-9 mm thick ( Square/rectangular) polished area of each tiles not exc 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white /coloured cement to match over a screed bed of 10 mm thick in CM 1:4 etc complete all as specified and as directed.

M&L for glazed coloured ceramic tiles 300x450 mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick rendering in cement mortar 1:4 etc complete all as specified and as directed.

M&L for 18-20 mm thick Granite black colour including rounding edges to exposed portion as in platforms for wash hand basin / sink (table, rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid in cement mortar (1:4) incl pointing in white cement (1:2) using mable dust with admixture of pigments to match with shade granite including cutting for securing of slab,complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even without using extra cement.

M&L for rendering 15 mm thick CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including mixing of water proofing compound, finishing the surface fair and even.

M&L for rendering 5 mm thick in ceiling on fair faces of concrete surfaces in cement mortar 1:3 and finished smooth and even without using extra cement.

Supply only liquid water proofing compound complete all as specified and as directed.

S&F framed work such as grills, gratings etc. with ends of bars shouldered or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar works conforming to Fe-290 Gde E-165.

S&F Powder coated anodised aluminium frame, for door, windows, ventilators runner & packing with rubber gasket etc, with one or more rebates including joinning cleat for rebates including joining cleats for fixing etc, complete all as specified & directed by Engineer-in-Charge.

M & L for powder coated Aluminium windows of three tracks outer frame,top,side section ,bottom frame( track) with guide track of size 92.5x31x1.50 mm with sliding window shutter 2 nos with glass and one nos with wire mesh9 total 3 nos shutter) from top and side section bottom section with wheel track and inner locking section of size 40x18x1.5 mm excluding glass 4 mm thick but including aluminium wire cloth 0.45 mm nominal dia wire and average width of aperture 1.40 mm complete all as specified and directed

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane

S&F 4.0 mm thick figured glass, pin head type and glazing with aluminium beading & rubber gasket in each panes in square n.exc 0.5 sqm in each pane in louvers complete all as specified and as directed.

S&F Powder coated anodised door shutter aluminium section nex weight 0.55kg Per/RM including necessary jointing cleats glazing clips, rubber neoprene handles 2Nos each door hinges alumn anodised snapveding screws etc..Complet all as specitied

S&F Factory Made single extruded WPC (Wood polymer composite) solid door/windows and other frames / chowkats of size 65mm x 100mm single rebated comprising of virgin PVC polymer of K value 58-60 (SuspensionGrade) calcium carbonate and natural fibres (Wood powder/rice husk/wheat husk) and Non-toxic additives (Maximum toxicity index of 12 for 100 gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws withdrawal strength of 2200 N (Face) and 1100 N (Edge) minimum compressive strength of 58 N/Sq mm, modulas of elasticity 900 N/Sq mm and resistance to spread flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixed in position with MS holdfast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS holdfast/lugs or SS dash fastener shall be paid for separately)

S&F Factory Made single extruded WPC (Wood polymer composite) solid door/windows and other frames / chowkats of size 45mm x 70mm single rebated comprising of virgin PVC polymer of K value 58-60 (SuspensionGrade) calcium carbonate and natural fibres (Wood powder/rice husk/wheat husk) and Non-toxic additives (Maximum toxicity index of 12 for 100 gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws withdrawal strength of 2200 N (Face) and 1100 N (Edge) minimum compressive strength of 58 N/Sq mm, modulas of elasticity 900 N/Sq mm and resistance to spread flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixed in position with MS holdfast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS holdfast/lugs or SS dash fastener shall be paid for separately)

S & F factory mode solid PVC moulded door shutter,28 to 30mm thick (stiles), wht 2,4 ot 6 raised panel desing with 3mm thick Moulded PVC Sheet on the front face & 2mm plain colout PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F 30 mm thick factory made Flush shutters, solid core construction, with particle board core and plywood face panels,complete all as specified.

S&F mild steel butt hinges 100 mm, medium weight cold rolled and fixed complete all as specified and as directed.

S&F 150 mm long aluminium anodised barrel tower bolts and extruded section and fixed complete all as specified and as directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed .

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

S & F in repair of CPVC pipes 25mm Incl. SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F in repair of CPVC pipes 20mm all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F 20mm brass elbow

S & F 20mm brass Tee

S & F 20mm brass male threaded adaptor

S & F 20mm brass female threaded adaptor

S & F 20mm brass tank adaptor

S & F 15mm brass elbow

S & F 15mm brass Tee

S&F 15mm dia stop vlave cast copper alloy screwed down high pressure with crutch or buterfly handle chromium plated screwed both ends for iron pipe or unions and fixed for 15mm bore pipe concealed type complete all as directed.

S&F 75mm dia PVC (SWR) floor/Nahani trap, plain with CP grating including solvent cement complete all as specified and as directed.

S&F 110mm dia PVC (SWR) 'P' trap complete all as specified and as directed.

S & F 110mm dia PVC (SWR) bends with oval access door

S & F 110mm dia PVC (SWR) bends

S & F 75mm dia PVC (SWR) bends with oval access door

S & F 75mm dia PVC (SWR) bends

S & F 110mm dia PVC (SWR) reducers

S & F 75mm dia PVC (SWR) vent cowls

M&L for 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

M&L for 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position complete all as specified

S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specifed and as directed.

S&F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.

S&F PVC low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle incl brakcet and flush pipe 32 mm dia complete all as specifed and as directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.. (Cat Part No of Cera F8030105 AB or equivalent in parryware/hindware/prayag)

S&F vitreous china trough type wash hand basin, white, size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia complete all as specified and directed.

S & F 15mm dia fancy pillar taps cast copper alloy with capstan heads, chromium plated, screwed down high pressure without lettered 'HOT' or 'Cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F brass CP 15 mm bore two way bib cock, quarter turn with wall flange and aerator, complete all as specified and as directed.

S&F 15mm dia fancy type chromium plated angle valve screwed both end for iron pipe or for unions , high pressure with long shank & cup (concealed type) having crutch handle complete all as specified and as directed by Engineer-in-Charge.

PVC connections 15mm size with PTMT nuts of length 450mm all as specified.

Soap dish, any type, fixed to plugs with chromium plated brass screws

M&L for newly plaster surface of walls and applying two coats of oil emulsion distemper over a coat of primer over 1 mm thick wall care putty, including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, complete all as specified and directed.

M&L for newly plaster surfaces of Wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm incl all necessary safety norms to the workers all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coat of oil emulsion, distemper over a coat of primer complete all as specified and as directed.

M & L two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over 10cm in width or girth not otherwise described after preparation of new or previously untreated steel surface

M & L 75 mm thick PCC (1:3:6) type C2 using as in plinth protections without using extra cement complete all as specified.

S&F in repair 25mm dia stainless steel curtain rod including 2 Pair of fancy type brackets/corners with each piece of curtain rod ,fixed with 45cm long mild steel screws complete all as specified

S&F Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified.

M&L for 25 mm thick cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregates) as in floor even and smooth without using extra cement complete all as specified and directed.

M&L for cleaning the plastered/concrete surfaces with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) APP modified water proofing memebrane as per IS 16540/16532-2017, 3mm thick and weighing not less than 3.80 kg per Sqm reinforce polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with bituminus aluminium paint @0.10 Ltr per Sqm complete all as specified.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil inc. Clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 30 cm girth (measured one metre above ground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance.

M&L 100 mm thick PCC 1:4:8 type D-2 using (40mm graded crushed stone aggregates) as in sub base etc complete all as specified & directed

M&L for coloured vitrified heavy duty ceramic scratch and stain resistant external tiles of size 40cmx40cmx12 mm thick laid over 15mm thick CM(1:4) set jointed and pointed in neat cement slurry in floors complete all as specified and directed. (Note : Colour of tile as approved by GE)

M & L for 15mm thick rendering on fair faces of brickwork or concrete surfaces in cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified.

M&L PCC 1:2:4 Type B-0 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs,, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

M&L for pre-cast cement concrete block masonry made of PCC (1:3 :6) type C-1 using 20mm graded crushed stone aggregate with solid blocks exc.10 cm in width and setting in cement mortar (1:6) incl demolition of old brick masonry complete all as specified and as directed.

M&L for for PCC 1:2:4 Type B-1 using 20mm graded stone aggregate in forming channel, benching inside manholes (1/2 or 3/4 section) in manholes and as in copinf incl. necessary formwork etc complete all as specified and as directed.

M & L for Precast reinforced cement concrete 1:2:4 Type B-1 using 20mm graded stone aggregate as in cover slab for manholes set in CM 1:4 complete all as specified.

Extra for forming fair finished channel or drain of 30cm inner girth in cement concrete using extra cement complete incl. forms, moulds mitred /stopped ends etc.

M&L for PCC 1;3:6 Type D-2 usinf 40mm graded stone aggregate for concrete bed to 150mm dia pipe incl. packing under and haunching against the sides of pipe after they are laid and tested complete.

Supply and laying 150mm internal dia DWCPE SN-8 pipes conforming to IS-14930 Part-II/IS 16025 Part-24 laying incl. all necessary work, cutting, jointing and fixing as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 Type B-1 smooth finished and reforming benching complete all as specified.

M & L for point wiring with 1100 Volts grade 1.5 sqmm PVC insulated FRLSH unsheated cable with multistandred copper conductor conforming to IS: 694:1990 (for phase, Neutral and and Earth) in and including Non metalic PVC rigid condiut medium grade with ISI mark with all accessories concealed in wall/ ceiling/floor etc, with cast iron / pressed steel terminal box of sutaible size duly painted inner & outside by anticorrosive paint, including plastic laminated sheet 1.6 mm thick for mounting switches, socket cover with fitting screw washer, including cutting chasses in wall/floor/roof for fixing of conduit/casing caping and making good the distributed surfaces matching with existing complete all as specified and as directed by Engr-In-Charge.

One light point controlled by one switch complete all as specified and as directed by Engr-In-Charge.

One fan point controlled by one switch complete all as specified and as directed by Engr-In-Charge.

One 3 pin 5 Amp Socket outlet point on same board complete all as specified and as directed by Engr- In-Charge.

One 3 pin 5 Amps socket outlet point on independent board complete all as specified and as directed by Engr-In-Charge.

All as per srl item No 99 here-in-before but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket.

M & L switch piano, flush type single pole, one way 5 Amps complete all as specified and as directed by Engr-In-Charge.

M & L switch piano, flush type single pole, one way 15 Amps complete all as specified and as directed by Engr-In-Charge.

M&L switch socket outlet 2in1, 3pin,5A complete all as specified and as directed by Engr-In-Charge.

M&L switch socket outlet 2in1, 3pin,15A complete all as specified and as directed by Engr-In-Charge.

M&L ceiling rose surface bakelite 65x50 mm two to three terminals.complete all as specified and as directed by Engr-In-Charge.

S&F MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, SPN 4 way with 200 Amps rated bus bar , 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including complete all as specified and as directed complete all as specified and as directed by Engr-In-Charge.

Supply and fixing MCB SPN 6 - 40 Amps, 240 Volts complete all as specified and as directed by Engr-In-Charge.

Supply & fixing MCB SP 06-40 Amp, AC, 240 volts, complete all as specified and as directed by Engr-In-Charge.

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run of 4 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through casing caping/ existing conduit as required complete all as specified and as directed by Engr-In-Charge. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

Supply and fixing surface mounted Mini Mirror light LED batten 2feet with extruded aluminium housing and robust construction 10 W system lumen with all accessories if required flexible copper 2 core wire from fitting to ceiling rose complete all as specified and as directed by Engr-in-Charge. (Make- Havells/ Crompton/ Bajaj)

Supply and fixing surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 20 W system lumen including flexible copper 2 core wire from tube light fitting to ceiling rose required length with all accessories all as specified and directed by Engr-in-Charge. (Make- Havells/ Crompton/ Bajaj)

S & F of water heater storage type with multifunctional safety valve, electric operated 230V, 2KW, single phase complete including one no of heating element, thermostate and indicator lamp and all saftey advices as per E-in-Cs Branch technical instruction upto five star rating and of capacity 25 Ltrs including provision of hot and cold water pipe, NRV, grounting Nut, Bolts in wall and making good distrubed surfaces. Complete all as specified and as directed by Engr-In-Charge. (Make- Havells/ Crompton/ Bajaj)

Supply and fix of ceiling fan 1200mm sweep with BLDC electric motor having star rated service wire 6.0 cubic meter per minute /watt, single phase with operating voltage range 140 to 285 volts BEE 5 star rated including mounting arrangement , 3 core flexible copper conductor cable up to ceiling rose , down rod suitable size length etc complete all as specified and directed by Engr in Charge. (Make -Bajaj/ Havells/ Cropmton)

Supply and PVC Body sound proof Exhuast fan 250 mm size with single phase 230 Volt 1200 RPM with louvers Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed by Engr-in - Charge (Make- Havells/ Crompton/ Bajaj)

Supply and laying 50 mm GI pipe fitting tubes medium grade galvanished with all fittings complete laid in trenches Complete all as specified and as directed by Engr-In-Charge.

Supply and laying 25 mm GI pipe fitting tubes medium grade galvanished with all fittings complete laid in trenches or fixing with wall Complete all as specified and as directed by Engr-In-Charge.

M & L required for cutting existing tubing for alterations or additions of 50 mm dia and making arrangement for connection complete all as specified and as directed.

S&F float valves of size 25 mm and as reqired at site as complete brass fitting with rod and plastic ball Complete all as specified and as directed by Engr-in-in Charge.

S & F gun metal gate valve with inner wheel head, screwed both ends in iron pipe and fixed of Size 20 mm Complete all as specifed and as directed by Engr-In-Charge.

Excavation in trenches in soft /loose soil not exceeding 1.5 M wide and not exceeding 1.5 M in depth for laying of UG cables etc and getting out complete all as specified and as directed by Engr-In-Charge.

Removing excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 M above the starting point all as directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm x 4 core complete all as specified and directed by Engr-In-Charge.

S&F MCCB 4 pole 415 volt of capacity 63 Amps with breaking capacity 16 KA with encloser Complete all as specified and as directed by Engr-In-Charge.

M&L for sand cushioning in trenches for bricks of u/g cable with coarse sand laid dry in trenches with uniform thickness complete all as specified and as directed by Engr-In-Charge.

Supply and lay burnt bricks of sub class 'B' laid dry across in trenches for cable protection all as specified and directed Complete all as specified and as directed by Engr - In - Charge.

Taking down old air conditioning of any type any size to remove the indoor unit disconnect stabilizer, copper tube, outdoor unit, control cale and water pipe and other connected items, transportation charges included in quoted rate all items are diposited diposite to AGE E/M store.

Supply and fix air cooled window type air conditioner electric driven , single phase cooling capcity of capacity 1.5 TR BEE 5 Star rated, control cable including drain pipe for unit to ground floor upto nearby drain. Remote control with fitted stand and all other accesaries required for capacity 1.5 TR complete all as specified and as directed by Engr-In-Charge.

Supply and Fixing split inverter type air condioner with indoor unit fix as wall and outdoor unit fixed outside the building including connected piping work and control cable up to outdoor unit fitted at accesible location for repair including drain pipe for indoor unit to ground floor upto nearby drain including breaking wall for piping work and making good matching with existing surface complete with air filter, remote control with fitted stand and all other accesaries required for capacity 1.5 TR minimum 5 star rated and BEE/ SEER value as per table 3.2 BEE ratified complete all as specified and as directed by Engr-In-Charge.

Supply and Fixing split inverter type air condioner with indoor unit fix as wall and outdoor unit fixed outside the building including connected piping work and control cable up to outdoor unit fitted at accesible location for repair including drain pipe for indoor unit to ground floor upto nearby drain including breaking wall for piping work and making good matching with existing surface complete with air filter, remote control with fitted stand and all other accesaries required for capacity 2 TR minimum 5 star rated and BEE/ SEER value as per table 3.2 BEE ratified complete all as specified and as directed by Engr-In-Charge.

Supply and fix voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designated for input variation between 170 volts to 250 volts output voltage stablized at 230 volts with aaccuracy of +2.5% and capacity 4 KVA Complete all as specified and as directed by Engr-In-Charge.

Supply and fix voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designated for input variation between 170 volts to 250 volts output voltage stablized at 230 volts with aaccuracy of +2.5% and capacity 5 KVA Complete all as specified and as directed by Engr-In-Charge.

Material and labour for sub main wiring concealed type with Two runs of single core, PVC insulated unsheathe multi-stranded copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and One run of 4 Sqmm PVC insulated multi-stranded copper conductor cable (FRLS) for earth continuity conductor drawn through and including suitable size ISI marked rigid fire retardant PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows etc including cutting chasing existing surface to conceal the conduit and making good to the disturbed surface to match with existing surface complete all as specified and directed. Note : Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC non metalic conduit with all necessary accessories will be measured as one length complete all as specified and as directed by Engr in charge

Material and labour for sub main wiring concealed type with Two runs of single core, PVC insulated unsheathe multi-stranded copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and One run of 6 Sqmm PVC insulated multi-stranded copper conductor cable (FRLS) for earth continuity conductor drawn through and including suitable size ISI marked rigid fire retardant PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows etc including cutting chasing existing surface to conceal the conduit and making good to the disturbed surface to match with existing surface complete all as specified and directed. Note : Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC non metalic conduit with all necessary accessories will be measured as one length complete all as specified and as directed by Engr in charge

Supply and fixing of PVC flexible conduit 16mm dia duly connected with drain outlet of split/ wondow type ACs duly clamped with wall upto floor / nearby drain complete all as specified and as directed by Engr-In-Charge.