SPECIAL REPAIRS TO SAILORS MARRIED ACCN BLDG NO T 95 AT INS CHILKA UNDER GE CHILKA

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and disposal of unserviceable material to a distance not exceeding 100 M complete all as specified and as directed.

Demolition of reinforced cement concrete in roofs, floors(other than ground floors), beams, lintels and similar suspended work etc (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M&L cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete for sunken floor complete all as specified and as directed.

M&L 50 mm thick cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in sub base for sunken floor, surface even and smooth without using extra cement complete all as all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick horizontal or sloping, rough finished surfaces of concrete complete all as specified and as directed.

M&L reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs , in shelves and the like complete all as specified and as directed.

M&L reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in chajjas and the like complete all as specified and as directed.

M&L Mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

Taking down cement plaster on brick or stone wall or on concrete surfaces including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Demolition of brick or stone masonary work built in cement mortar including all quoins ,arches,pillars etc complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plain exceeding 6m means radius built in cement mortar 1:6 complete all as specified and as directed.

M&L 10 mm thick rendering on brickwork or concrete surfaces of wall in cement mortar 1:6, surface finished even and fair complete all as specified and as directed.

M&L 15 mm thick rendering on brick work, concrete surfaces or stone wall surface in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement , surface finished even and fair complete all as specified and as directed. Note:-Water proofing compound shall be measured and paid separately under respective item.

M&L 5 mm thick rendering in cement mortar 1:3 on ceiling , surface finished even and fair complete all as specified and as directed.

Supply only water proofing compound complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer over 1 mm thick wall care putty including complete removal of existing old decorated surface of wall complete all as specified and as directed.

M&L applying three coat of white wash on ceiling including preparation of newly plastered surfaces of ceiling complete all as specified and as directed.

M&L for applying two coat of white wash on ceiling including preparation of old decorated plastered surfaces of ceiling complete all as specified and as directed.

M&L for applying two coat of white wash on walls including preparation of old decorated plastered surfaces of wall complete all as specified and as directed.

M&L applying three coat of white wash on wall including preparation of newly plastered surfaces of wall complete all as specified and as directed.

M&L for applying two coats of weather proof acrylic emulsion (Anti dust) paint exterior grade (100% acrylic) over a coat of primer on old decorated external surfaces of walls of any description over 10 cm width or girth etc on column/ pillars, RCC chhajja and facia etc including complete removal of existing treatment complete all as specified and as directed.

Dismantling of floor, health or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and applying cement slurry @3 kg/Sqm complete all as specified and as directed.

M&L Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 375mmx250mm or 450mmx300 mmx 6 to 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as directed.

M&L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

S&F Stainless steel plate rack of size 24 inch X 30x10 inch, ISI marked complete all as specified and as directed. Make:-Prayag Cat No P-330 or equivalent as approved.

S&F sinks made of stainless steel 1mm thick kitchen with plugs, washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets & connecting union to pipe, overall size 495mmX420mm bowl size 410mmX330mmX160mm complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

Fixing only 15 mm bore old galvanised iron steel tubing and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified and as directed.

Fixing only 20 mm bore old galvanised iron steel tubing and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified and as directed.

S&F 15 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F 20 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bend any radius complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bend any radius complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) branch piece double (single Y) equal or unequal complete all as specified & directed.

S&F in repair stack clamps for 110 mm pipe made out of 50 mmx 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S&F 75mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified & directed.

S&F 110mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified & directed.

S&F in repair 75 mm diameter of outlet PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bend with access door complete all as specified and as directed.

S&F in repair 15mm bore dia, Bib taps chromium plated , fancy type screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repair 15mm bore chromium plated , fancy type , angle stop valve, high pressure with crutch or butter fly handle ,screwed both ends for iron pipe or union and fixed complete all as specified and as directed.

S&F in repair 32 mm bore,75 cm long PVC waste pipe for WHB, sink etc complete all as specified and as directed.

S&F in repair 15 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair 100 diameter of outlet cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern) ,white including fixing bolts (excluding flushing cistern & Pipe) including necessary connection to trap and flushing pipe complete all as specified and as directed.

S&F in repair PVC low level flushing cistern of 10 litre capacity fixed including syphonic action type,ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F in repair Brass chromium plated tubular towel rail, 20mm dia , D type, 600mm long complete all as specified and directed.

S&F in repair Brass chromium plated shower rose of size 125 mm with swivel joint for fixing to GI pipe of 15mm dia including necessary fixing accessories complete all as specified and as directed. Make:-Parryware or equivalent

S&F 500 Litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections,20 mm dia bore ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) including dismantling existing unserviceable water tank complete all as specified and as directed.

S&F in repair 20 mm bore dia ball valve , high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed (mininimum weight -210 gms) complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white flat back of size 580mmX450 mm with fixing brackets including 15 mm dia chromium plated pillar taps, screwed down high pressure, with or without lettered Hot or Cold and fixed complete all as specified and as directed.

S&F in repair grating doom 100 mm dia of PTMT (minimum weight 25 gms) complete all as specified and as directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkat with shutters exceeding 1.5 sqm but not exceeding 4.0 sqm (without taking off shutters from the frames) complete all as specified and as directed.

M&L Forming jambs etc to openings incl cutting toothing and properly bonding into old work also facing, jointing and pointing to match existing work using cement mortar 1:4 complete all as specified and as directed

S&F Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with beat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined toghther with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet reinforced with M.S Square tube, in opening as per specification & drawing complete all as specified and as directed.

S&F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F 2nd class hard wood, 35 mm thick Glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc divided into squares with plain chamfered mitered and without sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I-2009, section 8, clause 8.24 (a), supplied & fitted to Chowkats complete all as specified and as directed.

S&F 2nd class hard wood, 35 mm thick, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied & fitted to chowklats complete all as specified and as directed.

S&F in repair 18 mm thick plywood, grade BWR, type BB, fixed with screw to timber frame work as in shelve or in shutter complete all as specified and as directed.

S&F 0.9 mm thick decorative laminate type-I of surface finish, colour and patters as approved, fixed with approved adhesive as per manufacturer's instruction complete all as specified and as directed.

Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and as directed.

S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 100 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 140 mm overall length of cover plate of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F 150 mm long aluminium handle, cast type anodised complete all as specified and as directed.

S&F 250 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 300 mm long , mild steel , ordinary rat tail rod pattern door springs including roller and roller plate complete all as specified and as directed.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 75 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F mild steel work as in flat iron for hold fasts and similar small articles etc complete all as specified and as directed.

M&L applying one coats of synthetic enamel paint including preperation of old painted wooden surfaces of any description , not otherwise described over 10cm width or girth complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint over a coat of pink primer including preperation of new wooden surfaces of any description , not otherwise described over 10cm width or girth complete all as specified and as directed.

S&F in repair PVC water tank cover suitable for 500 to 1000 litre capacity to the existing water tank complete all as specified and as directed.

Taking down existing shutter of any description exceeding 2 Sqm and refixing in same opening ater resecuring, easing and adjusting complete all as specified and as directed.

Disconnecting existing water tank of capacity exceeding 500 litre but not exceeding 1000 litre, cleaning, hoisting, reconnecting and refixing in position as decided complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium window/ventilator shutters of sliding type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, rollers, holding and with locking arrangements complete all as specified and as directed. Note :- Glass or wire cloth shall be measured and paid seperately under respective item as considered therein.

Supply only 4.8 mm thick plain/ frosted sheet glass ,ordinary quality, in square not exceeding 0.5 Sqm each pane fixed to aluminium joinery complete all as specified and as directed.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium window / ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (2 No) ,75mm long hinges type B-21 (2 No) ,suitable handle (1 No) with aluminium flat and screws complete all as specified and directed. Note :- Glass or wire cloth shall be measured and paid seperately under respective item as considered therein.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and fixed in aluminium window complete all as specified and as directed.

S&F for anodised powder coated of any colour (thickness of powder coated not less than 50 micron) aluminium grill of make "Deco grill" and DG-202 model with aperature size 60mmx45mm fixed with suitable channel complete all as specified as directed.

S&F 25 mm dia fancy type stainless steel curtain rod with heavy fancy type designed bracket and fixed with screws to walls complete all as specified and as directed.

S&F 75 mm long anodised aluminium Hasp and staple including bolt to hinge plate fixed with screws complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

M&L for Framed work such as grills, gratings. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, ladders framed balusters, and similar work conforming to Fe-290-0 or Fe-310-0complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint over one coat of over a coat of red oxide primer including preperation of iron and steel work of any description over 10 cm width or girth complete all as specified and as directed.

S&F 32 mm dia PVC flush pipe for high level cistern complete all as specified and as directed.

S&F 15mm dia chromium plated cast copper alloy, fancy type stop valves, high pressure with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F plastic water closet seat, white colour, closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S&F 2 in 1 health faucet with 1.5 M tube with hook complete all as specified and as directed. Make :-Prayag Cat No 455 or equivalent as approved.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove in cement mortar 1:3 complete all as specified and as directed.

M&L for water proofing roof treatment with APP based polymeric membrane of minimum weighing 3kg and minimum 3 mm thick and reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with LPG torch forced application over roof surface, with a side & end overlaps of minimum 100 mm, with and including priming the surface by bitumineous [email protected] litre per Sqm,applying with a coat of hot blown bitumen of grade 85/25 @ 1.2 kg/Sqm each at bottom and top of the membrane as bonding material and a coat of bituminous based aluminium primer @ 100 gm/Sqm on top including sealing all joints by thermo fusion complete all as per manufacturer's instructions including testing for water tightness by water ponding at least 72 hours including taking down of existing treatment and disposal of unserviceable material to a distance not exceeding 100 M complete all as specified and as directed.

M&L for water proofing treatment to sunken surface complete all as specified and as directed with the followings specification:- (i) applying evenly a tack coat of industrial Bitumen 85/25 at the rate of 1.2 Kg per sqm over the prepared surfaces. (ii) Apply APP modified polymeric membrane of weight not less than 3.0 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100mm shall be sealed/fused by flame torch application as per manufacturer instructions.

M&L for 10mm thick screed bed or bedding layer in cement mortar 1:4 on concrete,brick surfaces surface finished even and smooth without using extra cement to receive roof /sunken treatment, mixed with water proofing compound @2% by weight of cement over and including a neat cement slurry @ 3 Kg/Sqm , complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid seperately under respective item.

S&F in repair PVC connections 15mm size with PTMT nuts and washers of length 600mm complete all as specified and as directed.

Taking down carefully copper / aluminium point wiring(light,fan,socket or power) complete along with fittings such as switches, sockets, ceiling rose , lamp holder, tube light fittings and making good distrubed surfaces of walls or ceiling etc to match with the existing complete all as specified and as directed.

M&L for point wiring with 1.5 sqmm PVC FRLS insulated unsheathed multistranded copper cable with 1.5 sqmm PVC FRLS insulated multistranded copper cable as earth continuity drawn in including concealed PVC conduit not less than 20mm dia including pressed mild steel concealed box made out of 1.6 mm thick sheet overed with 3mm thick laminated sheets and other accessories required for mounting switches/sockets, accessories such as spacers, saddles, junction boxes for one light / fan point / bell point/5 amp socket controlled by one switch complete all as specified and as directed.

All as per item No 111 above but one socket outlet, three pin, 5/6 Amp on the same board with other switches complete all as specified and as directed.

All as per item No 111 above but for staircase light point controlled by 2 No two way switch complete all as specified and as directed.

All as per item No 111 above but with 4.0 sqmm PVC insulated unsheathed multistranded copper FRLS grade cable with one run of 2.5 sqmm PVC FRLS insulated copper cable as earth continuity for power point on independent board complete all as specified and as directed.

Taking down carefully sub main wiring including batten/ conduit by unscrewing from wall,ceiling and making good surfaces to match with existing complete all as specified and as directed.

M&L sub main wiring with 2 runs of 6.0 sqmm PVC FRLS insulated unsheathed copper cable multistandard 1100 V drawn in and including concealed PVC Conduit not less than 25mm dia and one run of PVC FRLS insulated unsheathed 6.0 Sqmm copper cable as earth continuity conductor with all accessories complete all as specifed and as directed. Note :- 2 runs of 6.0 Sqmm, 1 run of 6.0 Sqmm copper earth wire and 01 run of PVC conduit shall be measured as one unit length.

S&F switch piano, flush type, single pole, one way, 5/6 Amp, complete all as specified and as directed.

S&F switch piano, flush type, single pole, two wary, 5/6Amp, complete all as specified and as directed.

S&F switch socket outlet 2 in 1, 3 pin 5 Amp, 230 volt, complete all as specified and as directed.

S&F switch socket combination , 3 pin 16 Amp, 230 volt, complete all as specified and as directed.

S&F ceiling rose, surface bakelite 65mm x 30mm, three terminals over and including PVC box of size 3"x3" round type complete all as specified and as directed.

S&F five stepped type electronic fan regulator for ceiling fan of any sweep including necessary connection complete all as specified and as directed.

S&F bell push, flush type, 5 Amp, 230Volt, complete all as specified and as directed.

S&F calling bell, AC, 230 Volt single pole complete all as specified and as directed.

S&F in replacement 10 Watt LED Bulk Head fitting Environmenatal friendly, ultra morden, energy saving, surface mounted, decorative oval bulk head edge- lit LED luminaries comprising of high brightness LEDs complete all as specified and as directed. Make:- Bajaj Cat No BIBWP10WLED (Product code 112334) or Havells Cat Part No. HEXAFT10WLED857SSYMBOPC or Philips Cat Part No. WT202WLED6SCWPSUSIPC as approved.

S&F in replacement of 9 W tubelight fitting with lamp, Endura linear LED wall mounted LED batten with polycarbonate housing & integrated driver for efficient heat dissipation with complete fitting complete all as specified and as directed. Make:- Havells Cat part No LUMILINEBS 9WLED865SPCWH or Bajaj Cat part No. BCLSB 10 WH

S&F in replacement of 20 W tubelight fitting with lamp, Endura linear LED wall mounted LED batten with THD<20% polycarbonate housing & integrated driver for efficient heat dissipation with complete fitting complete all as specified and as directed. Make:- Havells Cat part No LUMILINEBS 20WLED865SPCWH or Bajaj Cat part No. BCLSB 20 WH

S&F in replacement of LED street light 25W, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP 66 protection and impact resistance of IK07 complete all as specified and as directed . Make :- Bajaj Cat Part No.ENXT P 30L WH CR PC SD 25W or Havells Cat Part No : VILUMINASL25WLED757SASYBOPC as approved.

Taking down defective exhaust fan from its position and refixing the same after necessary minor repair to make its functional complete all as specified and as directed.

Taking down defective ceiling fan from its position and refixing the same after necessary minor repair to make its functional complete all as specified and as directed.

M&L for spray painting with white synthetic enamel paint including preparation of old surface of the ceiling fan of any make/model/sweep, filling cavities with filler after cleaning dust in situ or in other position complete all as specified and as directed. Make :- Berger paint(Luxol)/Asian paint (Apcolite) / Jenson & Nicholson paint Ltd (Brolac)

M&L for rewinding of ceiling fan motor of 1200 mm sweep of any make with super enameled copper wire of existing gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts and washers, split pins etc complete all as specified and as directed

S&F in repair capacitor/ condenser of ceiling fan , 2.5 mfd of approved make complete all as specified and as directed. Make :- Nicco/Havells/Universal as approved.

S&F in replacement of ball bearing 6201 / 6202 / 6203 including metal filling, machining if required complete all as specified and as directed. Make :- SKF/NBC as approved

S&F in replacement of clamp with nuts , bolts and rubber bush suitable for ceiling fan of any sweep and make as per existing size and shape complete all as specified and as directed

Taking down old unserviceable MCB DBs with MCBs any type by unscrewing from wall or ceiling and making good the disturbed surface to match with the existing complete all as specified and as directed.

S&F factory made sheet metal enclosure for DBs double door (fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd /Standard/Havells

S&F MCB 6 to 32 Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F MCB 40 Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F in replacement of LED retrofit lamp B22 holder base with polycarbonate body and aluminium heat sink of 09/10W complete all as specified and as directed. Make:- Bajaj/Havells/Philips

S&F in replacement angle holder for LED bulb of any type complete all as specified and as directed.

S&F in replacement of Factory made sheet metal enclosure for DBs double door (fixed flush to the wall), TPN, 415 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 6.0 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F in replacement MCB 63 Amp, 415 Volt, TPN, breaking capacity 10 KA 'C' series, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F in repair capacitor/ condenser of exhaust fan , 4mfd of approved make complete all as specified and as directed. Make :- Nicco/Havells/Universal as approved.

M&L for rewinding of exhaust fan 300 mm sweep of any make with super enameled copper wire of existing gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts and washers, split pins etc complete all as specified and as directed

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4.0 mm dia (upto 7.5 M in length from earth plate) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-2009, connected to earthing with DBs all as specified including excavation and earth work in any type of soil, PCC 1:3:6 type C-1 using 20mm graded stone aggregate in chamber & 40mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab, reinforced, with 8mm dia TMT bar at 150mm c/c both ways, 15mm dia GI pipe light grade for earth lead protection, 20mm dia GI medium grade pipe for watering , water funnel etc complete all as specified and testing on completion.

ABHIMANYU MAHARANA

BLV SYNDICATE

UDAYA BHANU NAYAK