SPECIAL REPAIR/REPLACEMENT OF UNSV LT PANELS AND MCCB ALONWITH CONNECTED ITEMS AND PROVN OF WALL MOUNTED FANS AND TABLE LAMPS FOR LIVING-IN-ACCOMMODATION AT AF STN BAMRAULI

Amount

(a) High conductivity aluminium busbar (Set of 4 strips), 4 Nos TPN of suitable for 1000 Amps rating ,(RYB) for phase and 1 No for neutral mounted on DMC support with heat shrink sleeve-1 Set.

(b) Phase indication lamp, LED type (set of 3) -1 Set

(c) Ammeter anolog type having measuring range (0-500) Amps with CTs etc including rotary switch to measure load of each phase : L&T/Seimens or equivalent as approved

(d) Volt meter having measuring range (0-500) volt with rotary switch to measure voltage of phase R.Y.B make : L&T/AE or equivalent as approved

(e) Grouting of panel including earth work as required PCC (1:3:6) type D-2 using 20 mm gradeded stone & plastering with (1:4 )cement sand etc complete.

(f) ACB 4 Pole 800 Amp 415 volt manual drawout type with 50 KA breaking capacity & spreader both side as Incomming cotrol device : 01 Nos. (Schnieder/Havells/L&T/ABB/Legrand)

(g) INCOMMING: MCCB 4 Pole 630Amp 415 volt thermal adjustable ,type with 50 KA breaking capacity & spreader both side as outgoing cotrol device : 01 Nos. (Schnieder/Havells/L&T/ABB/Legrand)

(h) OUTGOING: MCCB 4 Pole 400 Amp 415 volt thermal adjustable ,type with 36 KA breaking capacity & spreader both side as outgoin cotrol device : 02 Nos. (Schnieder/Havells/L&T/ABB/Legrand/Legrand)

(j) MCCB 4 Pole 250 Amp 415 volt thermal adjustable ,type with 36 KA breaking capacity & spreader both side as outgoin cotrol device : 01 Nos. (Schnieder/Havells/L&T/ABB/Legrand/Legrand)

(a) High conductivity aluminium busbar (Set of 4 strips), 4 Nos TPN of suitable for 800 Amps rating ,(RYB) for phase and 1 No for neutral mounted on DMC support with heat shrink sleeve-1 Set.

(b) Phase indication lamp, LED type(set of 3) -1 Set

(c) Ammeter anolog type having measuring range (0-500) Amps with CTs etc including rotary switch to measure load of each phase : L&T/Seimens or equivalent as approved

(d) Volt meter having measuring range (0-500) volt with rotary switch to measure voltage of phase R.Y.B make : L&T/AE or equivalent as approved

(e) Grouting of panel including earth work as required PCC (1:3:6) type D-2 using 20 mm gradeded stone & plastering with (1:4 )cement sand etc complete.

(f) ACB 4 Pole 800 Amp 415 volt manual drawout type with 50 KA breaking capacity & spreader both side as Incomming cotrol device : 01 Nos. (Schnieder/Havells/L&T/ABB/Legrand/Legrand)

(g) INCOMMING: MCCB 4 Pole 630 Amp 415 volt thermal adjustable ,type with 50 KA breaking capacity & spreader both side as outgoing cotrol device : 01 Nos. (Schnieder/Havells/L&T/ABB/Legrand/Legrand)

(h) OUTGOING: MCCB 4 Pole 250 Amp 415 volt thermal adjustable ,type with 36 KA breaking capacity & spreader both side as outgoin cotrol device : 02 Nos. (Schnieder/Havells/L&T/ABB/Legrand/Legrand)

(j) MCCB 4 Pole 160 Amp 415 volt thermal adjustable ,type with 36 KA breaking capacity & spreader both side as outgoing cotrol device : 01 Nos. (Schnieder/Havells/L&T/ABB/Legrand/Legrand)

(k) MCCB 4 Pole 125 Amp 415 volt thermal adjustable ,type with 16 KA breaking capacity & spreader both side as outgoing cotrol device : 02 Nos. (Schnieder/Havells/L&T/ABB/Legrand/Legrand).

(a) High conductivity aluminium busbar (Set of 4 strips), 4 Nos TPN of suitable for 400 Amps rating ,(RYB) for phase and 1 No for neutral mounted on DMC support with heat shrink sleeve-1 Set.

(b) Phase indication lamp, LED type(set of 3) -1 Set

(c) Ammeter anolog type having measuring range (0-500) Amps with CTs etc including rotary switch to measure load of each phase : L&T/Seimens or equivalent as approved

(d) Volt meter having measuring range (0-500) volt with rotary switch to measure voltage of phase R.Y.B make : L&T/AE or equivalent as approved

(e) Grouting of panel including earth work as required PCC (1:3:6) type D-2 using 20 mm gradeded stone & plastering with (1:4 )cement sand etc complete.

(f) OFF load ChangeOver of capacity 400 Amp, 4 Pole, 415 volt: 01 Nos. (Schnieder/Havells/L&T/ABB/Legrand/Legrand)

(g) INCOMMING: MCCB 4 Pole 400 Amp 415 volt thermal adjustable ,type with 36 KA breaking capacity & spreader both side as Incomming cotrol device : 01 Nos. (Schnieder/Havells/L&T/ABB/Legrand/Legrand)

(h) OUTGOING: MCCB 4 Pole 250 Amp 415 volt thermal adjustable ,type with 36 KA breaking capacity & spreader both side as outgoing cotrol device : 02 Nos. (Schnieder/Havells/L&T/ABB/Legrand/Legrand)

(j) MCCB 4 Pole 160 Amp 415 volt thermal adjustable ,type with 36 KA breaking capacity & spreader both side as outgoin cotrol device : 01 Nos. (Schnieder/Havells/L&T/ABB/Legrand/Legrand)

(k) MCB 2 Pole 32 Amp, 415 volt thermal adjustable ,type with 16 KA breaking capacity & spreader both side as outgoin cotrol device : 02 Nos. (Schnieder/Havells/L&T/ABB/Legrand).

(a) High conductivity aluminium busbar (Set of 4 strips), 4 Nos TPN of suitable for 400 Amps rating ,(RYB) for phase and 1 No for neutral mounted on DMC support with heat shrink sleeve-1 Set.

(b) Phase indication lamp, LED type(set of 3) -1 Set

(c) Ammeter anolog type having measuring range (0-500) Amps with CTs etc including rotary switch to measure load of each phase : L&T/Seimens or equivalent as approved

(d) Volt meter having measuring range (0-500) volt with rotary switch to measure voltage of phase R.Y.B make : L&T/AE or equivalent as approved

(e) Grouting of panel including earth work as required PCC (1:3:6) type D-2 using 20 mm gradeded stone & plastering with (1:4 )cement sand etc complete.

(f) INCOMMING: MCCB 4 Pole 250 Amp 415 volt thermal adjustable ,type with 36 KA breaking capacity & spreader both side as Incomming cotrol device : 01 Nos. (Schnieder/Havells/L&T/ABB/Legrand)

(g) OUTGOING: MCCB 4 Pole 125 Amp 415 volt thermal adjustable ,type with 16 KA breaking capacity & spreader both side as outgoin cotrol device : 02 Nos. (Schnieder/Havells/L&T/ABB/Legrand).

(h) MCCB 4 Pole 63 Amp 415 volt thermal adjustable ,type with 16 KA breaking capacity & spreader both side as outgoin cotrol device : 02 Nos. (Schnieder/Havells/L&T/ABB/Legrand).

Supply, fixing (in replacement), connecting to electrical system & testing of Busbar panel board ,cubical type for out door use, made out of 3.15 mm thick CRCA sheet factory made, totally enclosed of size not less that 900x600x500mm and supported with 4 Nos MS Angle legs, duly painted with two coats of powder coated paint over one coat of red oxide primer effectively PVC gaket and sealed mounted on PCC blocks double door type with locking arragnedment with handle at front and openable at front &back bothe side with required hinges heavy duty, compartemtalised suitably including provision for tapping incoming & outgoing electric connections with suitable size of aluminium lugs glands and comprising of the following accessories :- (a) High conductivity aluminium busbar (Set of 4 strips), 4 Nos TPN of 300 amps rating (RYB) for phase and 1 No for neutral mounted on DMC support with heat shrink sleeve-1 Set.(b) Phase indication lamp, LED type(set of 3) -1 Set (c) Ammeter anolog type having measuring range (0-300) Amps with CTs etc including rotary switch to measure load of each phase : L&T/Seimens or equivalent as approved (d)Replacement of volt meter having measuring range (0-500) volt with rotary switch to measure voltage of phase R.Y.B make : L&T/AE (e) Grouting of panel including earth work as required PCC (1:3:6) type D-2 using 20 mm gradeded stone & plastering with (1:4 )cement sand etc complete

Supply, fixing & testing of LT distribution panel board (in replacement), made out of 2 mm thick MS sheet of size not less than 600x450x200mm duly painted with two coats of synthetic enamelled paint over one coat of red oxide primer wall mounted/semi-grouted in wall with locking arrangement, double door type, compartmentalised and provision for tapping incoming & outgoing electric connections with suitable size of lugs, glands, one MCCB will be mounted on proper din railes and comprising of the followings :- (a) Aluminium busbar chamber TPN of 200 amps rating (set of 4 strips) (b) Phase indication lamp-set of 3 (c) MCCB 4 pole 415 Volts, 50 Hz, 100 amps rating, 25 KA breaking capacity - 01 No.(Incomming ) (d) MCB TPN 63 A -2 No and MCB SPN 32 A -3Nos as out going cotrol (Note :- Make of MCCB/MCB : Schneider/L&T/ABB)

S&F (in replacement) following items in the existing out door/ indoor LT panels and connection with using aluminum lugs/ferruls incl disconnection & connection of cable and making necessary alteration in panel/door using welding wk and cutting as required for proper fixing & connection complete all as specified and directed as below :- (Note :-Make of MCCB/MCB : Schneider/L&T/ABB)

(a) MCCB 4 Pole 100 amps rating, 16 KA breaking capacity, 415 Volt

(b) MCCB 4pole 125 amps rating, 16 KA breaking capacity with spreader at both side

(c) MCCB 4 pole150/160 amps rating, 36 KA breaking capacity with spreader at both side

(d) MCCB 4 pole200 amps rating, 36 KA breaking capacity with spreader at both side

(e) MCCB 4 pole250 amps rating, 36 KA breaking capacity with spreader at both side

(f) Microprocessor based MCCB 4pole 250 amps rating, 36 KA breaking capacity with spreader at both side

(g) Microprocessor based MCCB 400 amps rating, 36 KA breaking capacity with spreader at bothe side

(k) CTs of existing ratio and capacity fixed in LT panels and connect with ammeter

(l) Indicator lamp, LED type incl 1.5 sqmm wire for connection to desired point of bus bar.

(m) MCB TPN 100 amps, 'C' series, 415 volt

Supply , laying, jointing and testing in replacement of underground LT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 240 Sqmm 3.5 Core laid in trenches/ducts/along poles/ through pipe under road etc all as specified and directed by Engr-in-Charge

Supply , laying, jointing and testing in replacement of underground LT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 Sqmm 3.5 Core laid in trenches/ducts/along poles/ through pipe under road etc all as specified and directed by Engr-in-Charge

Supply , laying, jointing and testing in replacement of underground LT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 Sqmm 3.5 Core aid in trenches/ducts/along poles/ through pipe under road etc all as specified and directed by Engr-in-Charge

Supply , laying, jointing and testing in replacement of underground LT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 Core laid in trenches/ducts/along poles/ through pipe under road etc all as specified and directed by Engr-in-Charge

Supply , laying, jointing and testing in replacement of underground LT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 Core laid in trenches/ducts/along poles/ through pipe under road etc all as specified and directed by Engr-in-Charge

Excavation in trenches not exceding 1.5m wide and noe exceding 1.0 sq m on plan and not exceding 1.5m depth and getting out in soft loose soil all as specified and directed

Returing filling in including spreading leveling watering and well ramming in layer not exceding 25 cm as in soil all as specified and dirceted all as specified and directed

Removing excavated material not exceding 50 m and deposting where directed at a level not exceding 1.5 m above the starting pointall as specified and directed

Supply and laying sand dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness all complete as specified and directed (Note - Only punned thickness will be measured for payment purpose)

Supply and laying bricks (old size) for cable protection by using common burnt clay building bricks, sub-class 'B' of size 230x11.5x7.5 cm having crushing strength not less than 75 Kg/sqcm, laid dry flat across length of the cable with width of the trenches equal to length of bricks, all as specified and directed

Supply and Laying in trenches for road/plinth and fixing alongwith pole/wall GI Tube 80 mm light grade for protection of cable all as specified and directed

Supply and Laying in trenches for road/plinth and fixing alongwith pole/wall GI Tube 50 mm light grade for protection of cable all as specified and directed

Supply and Laying in trenches for road/plinth and fixing alongwith pole/wall GI Tube 40 mm light grade for protection of cable all as specified and directed

M & L for boring holes (manually) under road, hard standing without damaging surface for 80/50/40 mm dia GI pipe etc complete all as specified and directed

M&L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground.(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to galvanised strip 32x6mm as earth lead by means of bolts, check nuts and washers of GI and earth wire protected by provision of GI pipe light grade,40mm bore including provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 KG/Sqm) and frame of angle iron 25 X 25 X 3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exeeding 50 mtr, all as per electrical plate No 3 of SSR 2009 Part-I and connection all as specified and testing on completion.

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly, complete all as specified and directed for following :-

(a) One light/fan point controlled by one by one way switch ( switch to be measured and paid separately)

(b) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

M&L switch Piano flush type 5 Amp SP one wayall as specified and directed by Engr in Charge.

Supply and fix wall mounted fan 400mm, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by two pull cord system all as specified and directed.

S & F bed side lamp LED 3 Watt all as specified and directed by Engr in Charge.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material

A S ENTERPRISES (BID ID -3122227)

Krishna Enterprises (BID ID -3127202)

VIKAS INDIA ENTERPRISES (BID ID -3121253)

Avion Industries (BID ID -3127013)

Madhu Electricals and Engineering Works (BID ID -3125813)

M/S MALHOTRA ENGINEERING WORKS (BID ID -3126037)

Ambrish Builders (BID ID -3126973)

K R GUPTA AND SONS (BID ID -3127046)

PRASHANT ENTERPRISES (BID ID -3120338)