Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.8 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹2.9 L+₹12,744 (4.60%)Admitted-Finance 202 1ST FLOOR VIVEKANAND PURI MALKAGANJ SARAI ROHILLA NORTH DELHI DELHI 110007 UDYAM DL 01 0065084 | NORTH DELHI | DELHI | 110007 | L2 | Admitted-Finance | |
| 3 | L3₹3.8 L+₹97,851.50 (35.3%)Admitted-Finance | L3 | Admitted-Finance | |
| 4 | L4₹3.9 L+₹1.2 L (42.4%)Admitted-Finance | L4 | Admitted-Finance | |
| 5 | L5₹4.1 L+₹1.3 L (46.2%)Admitted-Finance B 9 73 SECTOR 18 ROHINI NORTH WEST DELHI DELHI 110089 | NORTH WEST DELHI | DELHI | 110089 | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | DAYAL TRADERS L4 | Shiva Buildtech L5 | Travionyx Technologies Private Limited L6 | DEEPAK ENTERPRISES L1 | Gupta Brothers L3 | MITTAL TRADING COMPANY L2 |
|---|---|---|---|---|---|---|---|---|---|
| 1.01 | Supply of distribution panel board for automation of operation of T/well up to 10 HP Submersible pump set having sheet enclosure made out of 16 SWG sheet and 50 x 50 x6 mm angle iron and size 1000x750x300mm with 02 feet long legs stand, totally enclosed, power coated free standing floor mounted type, dust & vermin proof, out ward opening lockable door having hidden hinges and bolted back cover both using non-deteriorating neoprene rubber gasket. The various components and sub equipment of the panel will be shaped out of high conductivity electrolyte aluminum conductor and shall be liberal size. The control wiring of the panel will be done with PVC flexible wire of 1.5 mm2 each wire will be terminating a ferule crimped to the wire having the following components.:- MCCB, TPN of 100A breaking cap, 25 KA suitable for motor protection -1 No. Make L &T/ Havell's-. Power contactor 32 A. triple pole - 2 Nos. Ampere meter (0-30A) 4'' size square. Type-1No. Voltmeter (0-500v) 4'' size square. Type -1No. Indicating lamp set for RYB phase - 01 Set. Single Phase preventor - 01 No. Time switch digital/Analog type - 01 No. Over load relay thermal type 14-23 A -1No. Star dalta timer on delay - 01 No. Automanual switch 2 position selector switch center off with no + NC. Three pole power contractor -25A cap. - 01 No. TP MCB of 63 Amp. Capacity - 01 No. Power capacitor of 05 kvar. 415 volt 50Hz AC supply - 01 No. Make of Accessories : Havells/ L&T/ Siemens/AE/ DJB Approved make. The panel should start & stop automatically as per timing set in this. It should also re -start automatically on resumptions of power in case of power failure | 1 | No. | 49,500 ₹58,410 | 49,520 ₹58,433.6 | 60,000 ₹70,800 | 45,000 ₹53,100 | 55,000 ₹64,900 | 40,000 ₹47,200 Lowest |
| 1.02 | Supply of 3PH,10 HP submersible pump set 600-350 LPM and 46-73 Mtr Head. Make : SU/BS/Djb approved make | 1 | No. | 46,900 ₹55,342 | 46,950 ₹55,401 | 50,000 ₹59,000 | 45,000 ₹53,100 | 38,000 ₹44,840 | 36,000 ₹42,480 Lowest |
| 1.03 | Supply of PVC insulated sheathed copper conductor cable for submersible pump motor of size 6mmsqx3core make :- Grandlay / DJB approved make. | 180 | Mtrs. | 44,100 ₹52,038 | 45,360 ₹53,524.8 | 37,800 ₹44,604 | 27,000 ₹31,860 Lowest | 45,000 ₹53,100 | 36,000 ₹42,480 |
| 1.04 | Supply of 80 mm dia D/F G.I pipe in B Class as per ISI 3 mtr long Complete with cutting flange for submersible cable and support welded. Make :- Jindal / TATA / DJB approved make. | 18 | Nos. | 77,400 ₹91,332 | 77,760 ₹91,756.8 | 75,600 ₹89,208 | 54,000 ₹63,720 | 54,000 ₹63,720 | 50,400 ₹59,472 Lowest |
| 1.05 | Supply of tail piece medium class 0.5 mtr long including one end flanged and other end threaded of 80 mm dia. | 1 | No. | 1,100 ₹1,298 | 1,200 ₹1,416 | 1,500 ₹1,770 | 1,500 ₹1,770 | 1,500 ₹1,770 | 1,000 ₹1,180 Lowest |
| 1.06 | Supply of 80 mm dia G.I bend with both side flanged welded | 1 | No. | 1,500 ₹1,770 | 1,450 ₹1,711 | 1,500 ₹1,770 | 1,500 ₹1,770 | 1,800 ₹2,124 | 1,200 ₹1,416 Lowest |
| 1.07 | S/o M.S. clamp of M.S. strip 8mm thick duly hole for holding the pipe of 80 mm dia with nut bolt and washer | 2 | Nos. | 2,000 ₹2,360 Lowest | 2,200 ₹2,596 | 2,400 ₹2,832 | 3,000 ₹3,540 | 3,600 ₹4,248 | 2,400 ₹2,832 |
| 1.08 | S/o M.S bore cover made out of M.S. plate suitable for 12" dia bore complete with suitable hole for passing the 80mm dia GI pipe, as per site requirement. | 1 | No. | 1,200 ₹1,416 Lowest | 1,500 ₹1,770 | 2,000 ₹2,360 | 1,500 ₹1,770 | 2,000 ₹2,360 | 1,500 ₹1,770 |
| 1.09 | S/o rubber mat for electrical purpose of size 1mX2m and 12.5 mm thick. Make:-Jyoti/National/ DJB Approved make. DJB SOR 2025 code 22.4.4 | 1 | No. | 7,000 ₹8,260 | 7,500 ₹8,850 | 2,400 ₹2,832 Lowest | 4,000 ₹4,720 | 3,500 ₹4,130 | 2,500 ₹2,950 |
| 1.10 | S/o CI sluice valve , non rising spindle, D/F P.N 1.0 of size 80mm. Make:- Kirloskar /IVC/DJB approved make. DJB SOR - 25. Code 4.22.2 | 1 | No. | 15,000 ₹17,700 | 16,000 ₹18,880 | 7,700 ₹9,086 Lowest | 12,500 ₹14,750 | 15,000 ₹17,700 | 12,000 ₹14,160 |
Tender Value
Refer Docs
EMD Value
₹8,000
Closing Date
9 Dec 2025, 3:00 pmClosed
Office of the Ex. Eng. (E and M) M-2
Pocket-A, Dilshad Garden, Delhi-110095
SITC of Electrical/Mechanical equipment of tubewell at Samosa Chowk block C -2 Nand Nagari under AE(E and M) - III
2025_DJB_282215_2
NIT No. 20 (25-26)
Open Tender
Miscellaneous Works
Works
30 days
AE(E and M) - III.
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Ac No. 50448339804
₹8,000
26 Dec 2025
2 Dec 2025
9 Dec 2025
2 Dec 2025
9 Dec 2025
2 Dec 2025
Supply of 3PH,10 HP submersible pump set 600-350 LPM and 46-73 Mtr Head. Make : SU/BS/Djb approved make
Supply of PVC insulated sheathed copper conductor cable for submersible pump motor of size 6mmsqx3core make :- Grandlay / DJB approved make.
Supply of 80 mm dia D/F G.I pipe in B Class as per ISI 3 mtr long Complete with cutting flange for submersible cable and support welded. Make :- Jindal / TATA / DJB approved make.
Supply of tail piece medium class 0.5 mtr long including one end flanged and other end threaded of 80 mm dia.
Supply of 80 mm dia G.I bend with both side flanged welded
S/o M.S. clamp of M.S. strip 8mm thick duly hole for holding the pipe of 80 mm dia with nut bolt and washer
S/o M.S bore cover made out of M.S. plate suitable for 12" dia bore complete with suitable hole for passing the 80mm dia GI pipe, as per site requirement.
S/o rubber mat for electrical purpose of size 1mX2m and 12.5 mm thick. Make:-Jyoti/National/ DJB Approved make. DJB SOR 2025 code 22.4.4
S/o CI sluice valve , non rising spindle, D/F P.N 1.0 of size 80mm. Make:- Kirloskar /IVC/DJB approved make. DJB SOR - 25. Code 4.22.2
S/o CI, D/F swing type NRV of 80mm dia Make:- kirloskar / IVC / DJB approved make.
S/o Venturi assembly 80 mm dia with complete accessories required at site.
Supply of LT Aluminium cable, Solid XLPE, insulated PVC armoured 650/1100 V - grade of size 3.5 X 25 Sq mm. Make : Havells/ Grandley/ Gloster/ DJB approved
S/o electronic Dozing pump (4LPH,5.5 Kg) electrically controlled operated 230V, 50 HZ, supply chemical grade tank of 100 ltrs with pipe Make- Clomax / DJB approved make.
S/o nut bolts with washer of good quality of 1/2"x2" size. DJB SOR - 25 code 22.6.1
S/o rubber packing sheet neoprene synthetic 50%. Make : Jyoti/ National
Lighting arrangement including providing fixing1 No. tube light fitting 40 watt , 1 No. bulb point, 1 No. street light on wall of room and also control board.etc.i/c electrification of room.
Labour charges for lowering the submersible pump set with all allied E&M equipments and fixing Delivery line, valves, electronic dozing pump i/c hardware items as nut, bolts & washer i/c cartage to & fro i/c testing and commissioning of tube well on load / off load.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.91 MB
BOQ_372867.xls
BOQ • 0.26 MB
NIT.pdf
Tender Documents • 0.89 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .