Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹13.3 LAccepted-AOC | 1 | Accepted-AOC LOWEST RATE | |
| 2 | 2₹13.8 L+₹49,150.50 (3.68%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹15.0 L+₹1.6 L (12.3%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST |
Tender Value
₹13.0 L
EMD Value
₹25,960
Closing Date
26 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PALAM DELHI CANTT
GE (AF) PALAM DELHI CANTT-10
ADDN/ ALTN FOR PROJECT OFFICE OF GE(P) AF AEROSPACE MUSEUM AT AF STN PALAM DELHI CANTT-10
2022_MES_520369_1
GENP-09/2022-23
Open Tender
Civil Works
Item Rate
120 days
GE (AF) PALAM DELHI CANTT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) PALAM
₹25,960
Yes
28 Apr 2023
27 Apr 2022
27 May 2022
27 Apr 2022
26 May 2022
12 May 2022
60 days
Amount
B/R Works: Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises as directed by Engr-in-charge.
M & L for Cement Concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete.
M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete.
S&F Vitrified ceramic tiles 10 mm thick of light shade (Square/rectangular) polished, area of each tile not exceeding 0. 36 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as specified and directed.
Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 including finishing the surfaces even and smooth without using extra cement. as specified and directed.
M & L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness including cover fillets as directed.
S&F for anodised aluminium snap grid frame work for false ceiling of size of grid 605 x 605mm including fixing to roof members using 4 mm dia GI wire and adjustable fastening system, or fixing to RCC roof by means of anchor fastners etc complete
M&L for 18/19 mm thickness perforated particle board/tiles for insulation and accoustic purposes,60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified and as directed.
Taking down shutter of any description area exc 1 Sqm but not exc 2 Sqm each all as specified and directed by Engr-in-Charge..
S&F for 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type on both sides including all necessary fittings such as alumunium tower bolts 150 mm (2 Nos), MS but hinges 100 mm (3 Nos), alumunium handle 150 mm (2 Nos), alumunium sliding door bolt 300 mm (1No), alumunium door stopper (1No) etc per shutter complete all as specified and directed by Engr-in-Charge
S&F anodised aluminium frame for doors, windows, ventilators with one ore more rabates including jointg cleat, gap between wall & frame to be filled with silicon base adhesive / sealent complete all as specified and directed
S & F for powder coated anodised aluminium door / window shutters using aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, alumunium handles and tower bolt 150 mm (2 Nos each) and alumunium hinges 100 mm (3 Nos) per shutter, anodised aluminum snap beading, screws, 4 mm thick sheet glass etc complete all as specified.
Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings complete all as specified and as directed.
S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws and all necessary arrangements complete all as specified and directed.
M&L for brick work with old size, sub class 'B' bricks, straight or curved on plan of any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.
Cutting chases, pinning in, for brick walls, making good to facings for concealed water tubing etc. cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and directed.
Cutting holes into or through brick walls built in cement mortar and making good with cement mortar 1:3 or in cement concrete 1:2:4 type B-1 as required (superficial area not exc 150 sqcm) all as specified and directed by Engineer - in - Charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 Sqm but not exc. 4 Sqm each complete all as specified and directed.
S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.
S&F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.
S&F, 35 mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.
S&F for 35 mm thick factory made plain, framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated and made of second class hard wood complete all as specified and directed.
Cutting opening through brick walls for door, windows and other openings or enlarging existing openings, coverting window into door openings etc or cutting out defective brick work for under pinning including providing fixing and removing shoring cleaning and stacking bricks removing surplus serviceable bricks hard core etc to store and removeing debris from site to outside MoD land.
Forming jambs, etc to openings (to foregoiing item) including cutting toothing and properly bonding into old work also facing jointing and pointing to match exisiting work as cement mortar 1:6 complete all as specified and directed
M&L for 12 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with nails / screw to aluminium frame work etc as in cup board or in narrow widths not exc. 15 cm each rebated or flat edges complete all as specified and directed.
Hacking out old broken glass from metal frame and S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.5Sqm in each pane complete all as specified and directed.
S&F for aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete.
S&F for aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete.
S&F for butt hinges, medium weight, cold rolled, mild steel of size 100 mm .
S&F for butt hinges, medium weight, cold rolled, mild steel of size 125 mm.
S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm.
S&F cast iron body hydraulic door closer hydrualically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L for mild steel framed work such as grills, gratings, etc. with ends of bars, shouldered and/or riveted, or forged into spikes, framed guard bars etc and similar work conforming to Fe-290 (Gde-E-165) complete.
M&L for factory made pressed steel frames size of frame 165 x 60mm for doors with two rebates including necessary fixing lugs, hinges, lock strike plate etc. complete.
M&L for cement concrete (1:2:4), type B-1, using 20mm graded stone aggregate in coping and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description exc. 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer.
M&L for preparation of new or previously untreated wooden surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.
M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match the tiles laid over and including 15mm thick screed bed in CM 1:6 .
M&L for vitrified tiles (light shade) 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and laid over and including 15mm thick screed bedding in CM 1:6.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed
M&L for glazed ceramic coloured tiles of size 450 X 300 X 7 mm thick on vertical surfaces such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including rendering10mm thick in cement mortar (1:4).
M&L for cement plaster 10mm thick in cement mortar (1:6) on brick or concrete surfaces of wall including finishing surface even and smooth without using extra cement.
M&L for cement plaster 15 mm thick in cement mortar (1:4) on brick or concrete surfaces of wall including finishing surface even and smooth without using extra cement.
M&L for cement plaster 5 mm thick in cement mortar (1:3) on brick or concrete surfaces of ceiling including finishing surface even and smooth without using extra cement.
M&L for preparing newly plastered surfaces and applying three coats of white wash in ceiling complete all as specified and directed.
M&L for preparing newly plastered or previously untreated surfaces and applying two coats of oil bound distemper over a coat of primer over chalk whitining on walls complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.
Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.
Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.
S&F in repair chromium plated angular stop cock 15 mm dia with flange complete all as specified & directed
S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.
S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.
S&F 1000 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical, vertical with closed top), ISI marked, and fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed
S&F for 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms)
S&F in repair 25 mm dia and 0.8mm wall thickness, stainless steel fancy type, decorative curtain rod with ss brackets and decorative ball type end fenials (As per Sample) fixed to walls using PVC plugs and full thread steel screws all as specified and directed.
S&F in repair chromium plated glass shelf of size 22" (550mm long) complete all as specified and directed.
S&F in repair chromium plated, Soap dish holder complete all as specified and directed.
S&F in repair chromium plated, Toilet paper holder complete all as specified and directed.
S&F in repair pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed 15 mm bore dia complete all as specified and directed
S&F in repair bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15mm bore.
Supply only 32mm dia waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repair grating, square, 150mm size of PTMT (minimum weight 100gms) complete all as specified and directed.
Supply only PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.
Supply only PVC waste pipe 32mm bore of size 450mm to 600mm long complete all as specified and directed.
S&F for 15 mm dia two way combination cocks (one bib tap and one stop/angle cock for health faucet) including health faucet with 1.2 mtr CP flexible tube and wall hook mounted type chromium plate for EWC.
S&F for 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.
S&F for 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.
S&F for 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.
S&F for 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.
S&F for 110mm bore PVC (SWR), vent cowl complete all as specified and directed.
S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc.
S&F in repair vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. Note :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.
S&F in repair vitreous china wash down water closet pan (pedestal pattern), white with seat cover white including fixing bolts but excluding flushing cistern and flush pipe complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.
Excavating in post holes (or similar holes) each 0.5 cum getting out,in soft /loose soil & returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm
M&L cement concrete type C-2 1:3:6 (40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft /loose soil
M&L for broken stone or boulders hardcore of gaure exc 63 mm but n exc 100 mm deposited spread and levelled in layers n exc 15 cm thick watered and rolled / rammed to a true surface
M & L for 100 mm thick cement concrete 1:4:8 type D-2 (40 mm graded aggregate) in sub-floors of floors and pavings etc
M & L for 50 mm thick cement concrete 1:2:4 type B-1 (20 mm graded stone aggregate) in floors and pavings etc completed all as specified
Removing exacavated material / soil not exc 100 m and depositing where directed at a level n exc 1.5 m above the starting point getting out
E/M Works: Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc and making good disturbed surfaces of walls, floors etc.
M&L for Point wiring with 1.5 sqmm multi strand PVC insulated unsheathed FRLS copper conductor cable in and including non metallic rigid PVC concealed conduit ISI marked, medium duty 20 mm dia including inner and outer frame plate matching with surrounding with sunken steel boxes zinc oxide plated of suitable size including PVC green insulated unsheathed 1.5 Sqmm multistrand FRLS copper conductor cable as continious earth wire and connecting to earth duly complete for One light /fan/ call bell point controlled by one switchall as specified and directed.
All as per item No 88 above but One 5 pin socket outlet 5 Amps on independent board.
All as per item No 88 above but One 5 pin socket outlet 5 Amps on same board
All as per item No 88 above but with 2.5 sqmm multi stranded FRLS copper conductor 1100 volts grade PVC insulated sheathed cable with FRLS PVC 1.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board.
S&F Modular switch piano type flush button type single pole one Module 6 Amps 230V front operated .
S&F Modular switch piano type flush button type single pole one Module 16 Amps 230V front operated .
S&F Modular socket 6 Amp/16 Amp -2/3 pin, 2 Module.
S&F Modular socket 6 Amp 2/3 pin , 2 Module
S&F ceiling rose , 3 phase/PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals
S&F Bell push modular type 5Amp 230V
S&F Bell Multi Music type AC 230V single pole
Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.
S&F Surface/Rececess mounted compact vertical round shaped down lighter in white finish with chrome linging 12 watt LED 6000 K all as specified and as directed.
Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC surface type with highefficiency PMMA diffuser soft glare free light completewith driver, holders & LED lamp suitable for ceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete.
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size as specified and directed.
S&F mirror light LED type powder coated white finish and separate replaceable electronic driver 10 watt all as specified and as directed.
S&F double door MCB DB made out of CRCA steel sheets, Phosphates powder coated with Earth stud, Din Rail, Ground terminal blocks, SP 240 volts 2 way double door open able complete.
S & F distribution board iron clad, double door with IP-43 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link complete with one MCCB 4 pole 415 Volts 125 Amps rating with rupturing cap 16 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge (Outgoing MCB will be measured separately).
S&F 6 to 32 Amp MCB single pole 240 V 10 KA (C-Series)
S&F MCB single pole with netural 240 volts 6 to 40 Amps (C-series)
S&F for ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC).
Taking down defective ceiling fan/Exhaust fans of any sweep, dismantling, replacing defective part, overhauling, cleaning, greasing, etc and hanging up/fixing back in the original position, connecting up and testing complete all as directed.Note : (i) The unit rate quoted shall deemed to included for minor items viz nuts,bolts split pin and rubber wheel.
M&L for sub main wiring with FRLS PVC insulate sheathed 2 x 4 sqmm stranded copper conductor cable 1100 volts grade heavy duty drawn into PVC concealed conduit not less than 20 mm dia with all accessories including 4.00 Sqmm PVC insulated green copper cable for continues earth complete
S&F sheet metal enclosures with single pole and neutral enclosure with two pin and earth plug and socket complete with one MCB 20 A 240V
M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2, excavation and earth work etc all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion. NOTES : The unit rate shall be included for protection pipe and GI strip dia from top of earth plate up to 5.00 meter above ground level, filling of earth pit with soil.
Supply and fixing rigid non-metallic PVC conduit 32mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc as directed.
Supply & fixing exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver
Supply and fixing telephone socket white all as directed. Make- Legrand Polycarbonate Myrius RJ11 or equivalent in Havells/CG/Bajaj/Philips.
Supply and fixing cable TV socket outlet fitted in Robust designed assembly plates smug fit on the wall Dust Free Glossy Finish Pure White Color.Make Havells or equivalent in Legrand/CG/Bajaj/Philips.
Kunal Construction Co.
SURESH KUMAR SHARMA & CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .