CERTAIN REPAIR TO FLOORING, TILING,PLINTH PROTECTION,DRAIN ,RAIN WATER PIPE, ROOFING, JOINERY, PLUMBING, SANITARY APPLIANCES AND ALLIED WORK IN ZONE-A AREA OF AGE BR-I UNDER GE (EAST) LUCKNOW

Amount

Taking Down Chowkats or frames with shutters (without taking off shutters from the frames) area not exc 1.50 sqm each, and removing from site, complete all as specified and directed.

Taking downChowkats or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sgm but not exc 4 Sgm each and removing from site complete all as specified and directed.

Taking down shutters of any description area not exc 1.00 sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but not exc 2.00 Sqm each complete all as specified and directed.

M&L plain cement concrete cast in situ 1:3:6 type C-1 using 20 mm graded stone aggregate as in copings ,hold fast,back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work complete all as specified and directed.

S&F, hold fasts, supports or stays for rainwater, knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 code E-165 complete all as specified and directed.

M&L 2nd class hard wood plain, solid, straight chawkats and frames,wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fixed etc complete all as specified and directed.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc size 165 x 60 mm complete all as specified and directed.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc size 105 x 60 mm complete all as specified and directed.

S&F, 30mm thick, flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

S&F, 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F, 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; for window, ventilators sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and directed..

M&L powder coated aluminum window shutter sliding type using 1.80 mm thick aluminum open three track section having size style & top rails 83 x 44 mm , bottom rails 100 x 44 mm (Make - Hindalco/Jindal) including joining cleats ,glazing clips,rubber packing, aluminium snap beading, screws,with necessary fitting and glazing shall be done by using 5 mm thick plain sheet glass (Make - Modi guard/saint gobin) incl aluminum grill and wire mess jali etc complete all as specified and directed.

M&L powder coated aluminum window openable type using 1.50 mm thick frame size 63 x 38 & shutter size 47 x 44 mm (Make - Hindalco/Jindal) including joining cleats ,glazing clips,rubber packing, aluminium snap beading, screws,with necessary fitting and glazing shall be done by using 5 mm thick plain sheet glass (Make - Modi guard/saint gobin) incl aluminum grill and wire mess jali etc complete all as specified and directed.

S & F, factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F, Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the framecomplete all as specified and directed.

S&F, steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed and welded complete all as specified and directed.

S&F, steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed and welded complete all as specified and directed.

S&F steel ventilator with top hung shutter including box type hinges, peg stay and glazing bars complete with dove tailed or welded including one coat of red oxide primer complete all as specified and directed.

S & F, 100 mm size butt hinges, medium weight, stainless steel, and fixed complete all as specified and directed.

S & F in repair 100 mm size butt hinges, medium weight, stainless steel, and fixed complete all as specified and directed.

S & F, 75 mm size butt hinges, medium weight, stainless steel, and fixed complete all as specified and directed.

S & F in repair 75 mm size butt hinges, medium weight, stainless steel, and fixed complete all as specified and directed.

S&F 150mm long aluminium handles cast type, anodised, complete all as specified and directed.

S&F in repair 150mm long aluminium handles cast type, anodised, complete all as specified and directed.

S&F 100mm long aluminium handles cast type, anodised, complete all as specified and directed.

S&F in repair 100mm long aluminium handles cast type, anodised, complete all as specified and directed.

S&F, 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F, 100 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair 100 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F, MS sliding door bolts 300mm long plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate and fixed complete all as specified and directed.

S&F in repair MS sliding door bolts 300mm long plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate and fixed complete all as specified and directed.

S&F, 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F of 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and directed. (Fixed as in Existing frame own arrangement)

S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and directed. (Fixed as in Existing frame own arrangement)

S&F, 125 mm size hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair 125 mm size hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads (exc 1.5 sqm) complete all as specified and directed.

S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.

S&F, 3 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq. m in each pane, complete all as specified and directed.

S&F galvansied mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair galvansied mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples all as specified.including taking down from any section and refixing with new wire mesh with tinned tack/by welding/bolting/beading in steel/wooden door/window/ventilator and making good the disturbed portion during execution complete all as specified and directed.

S&F in repair, 150mm floor door stopper of aluminium alloy body and tongue,anodised, with hard drawn steel spring complete all as specified and directed.

S & F 0.56 mm Plain Aluminium sheeting alloy 31000H4 in straight flashing of door all as specified.

M&L for prepration of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth complete all as specified and directed.

M&L two coats of synthetic enamel paint over a coat of Red oxide primer surfaces including preparation of new steel surfaces of any description over 10 cm width or girth, not oterwise descrived complete all as specified and directed.

Demolition of brickwork built in cement or cement lime mortar including all quoins, arches pillar etc complete all as specified and directed.

M&L brick work with fly ask bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan any radius in half brick thick built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including ranking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L 15mm thick rendering on fair faces of brick work or concrete surface in CM 1:4.finished even and fair with mixing of water proofing compound complete all as specified and directed.

M&L rendering 10mm thick on fair faces of brick work in CM(1:6) surface finished even and smooth without using extra cement, complete all as specified and directed.

M & L rendering 5mm thick in CM 1:3 as in ceiling ,soffits of slab and finish the surface even and smooth without using extra cement complete all as specified and directed.

M & L three coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L applying two coats of oil bound distemper over a coat of primer on walls including preparation of new plastered surface complete all as specified and directed.

M&L two coats of cement base paint over a coat of primer on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete including dismantling of old tiles / roughning concrete & mozaic surfaces complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (dark shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete including dismantling of old tiles/ mozaic surfaces complete all as specified and directed.

M&L joint less non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, laid over 15mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L, glazed ceramic coloured tiles (joint free) of size 450x300x7mm thick over 10mm thick plaster in CM 1:3 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Demolation of stone slabs and tiles of any description or thickness laid, bedded and pointed in any motar etc complete all as specified and directed.

M&L for18-20 mm thick granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shed of granite stone incl grainding and polishing incl 15 mm thick screed bde or bedding layer in CM (1:6) etc complete all as specified and directed.

M&L rounding to edges of stone slabs one edge, such as steps, cooking platform, and other similar situations etc complete all as specified and directed.

M&L machine pressed precast conceret interlocking paver block any shape and size conforming to IS- 15658-2006 of 60mm thickness, M-35 Grade , with grey cement and no pigment complete all as specified and directed.

M&L Chequred cement concrete tiles20 cm x 20 cm x25 mm thick, set,jointed and pointed in neat cement slurry in floor with grey cement and pigments incl 15 mm thick screed bed or bedding layer of motar (1:6) for laying of floor finish etc complete all as specified and directed.

M&L cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n'exe 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L, 40mm thick cement concrete 1:2:4 type B-1using 20mm graded aggregate as in floors, surface finished even & smooth without using extra cement complete all as specified and directed.

M & L, 50mm thick cement concrete 1:3:6 type C-2 using 20mm graded aggregate as in floors, surface finished even & smooth without using extra cement complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tank and from mouth of circulating pipe etc of capacity exc 250 not exc 500 ltrs complete all as specified and directed.

S&F, 500 Ltr capacity Rotational moulded polyethylene water storage tanks ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one complete all as specified and directed.

S & F, in repair 20mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.

S&Fin repair gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore complete all as specified and directed.

S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore ,including cleaning and refixing old steel tubing and connections in new or old position (Walls, ceiling,floors,) etc complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore ,including cleaning and refixing old steel tubing and connections in new or old position (Walls, ceiling,floors,) etc complete all as specified and directed.

S&F steel water tubes medium grade, galvanised with all fittings 15mm bore fixed including taking up or down old steel tubing and connections complete to concealed in walls and ceiling or laid in floors complete all as specified and directed.

S&F steel water tubes medium grade, galvanised with all fittings 20mm bore fixed including taking up or down steel tubing and connections complete to walls and ceiling or laid in floors trenches complete all as specified and directed.

Cutting chases pining in brick,concrete walls built in cement mortar or cement lime mortar making good to facings where required and pointing in cement mortor 1:3 to ends or edges of shelves lintels etc and cutting chases for concealed water tubing cutting not exc 10 cm girth complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, complete all as specified and directed.

S & F, in repair 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F, in repair, 15mm dia long body bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle sc-rewed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore angle valve /stop valve chromium plated fency type.cast copper alloy screwed down high pressure,crutch or butterfly handle, ,screwed both end for pipe or for unions complete. chromium plated with suitable type complete all as specified and directed.

S&F in repair 15mm dia spindle for bib taps,angle valve and pillar taps as required as per ground and directed by Engr in charge complete all as specified and directed. (Including taking down existing spindle carefully and fixed the same in position)

Supply and fixed in repair stop valves, 15mm dia, cast copper alloy,CP fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F, in repair, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of capacity 10 litre (ISI marked) complete all as specified and directed.

S&F in repair kitchen sink with drainage board made of stainless steel 0.80 mm thick with plug washer and waste including bedding in cement mortar including fixing cantilever bracket and connecting union to pipe overall size 915 X 460 mm bowl size 410 X 330 X 160 mm complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack of overall minimum size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws etc complete all as specified and directed.

S&F, in repair vitreous china wash down water closet pan pedestal pattern, including connection to drain (or outgoing pipe) and pvc seat cover excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repair plastic water closet seat cover black/white, closed pattern with flat bottmom & cover and aluminum anodised hinging device complete all as specified and directed.

S&F, in repair 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed.

S&F in repair 32mm brass chromium plated bottle trap for wash hand basins with inlet and outlet screwed for pipes or connections including necesssary packing,union and cap complete all as specified and directed.

S&F in repair, brass chromium plated shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.

S & F, in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F, in repair Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed 32mm bore, complete all as specified and directed.

S&F in repair, PVC (SWR) floor trap, plain with grat-ing including joint-ing with solvent cement ( Diameter of outlet 75mm) complete all as specified and directed.

S&F in repair, grating doom 100 mm dia, PTMT complete all as specified and directed.

S&F, in repair sheet glass shelf assemble consisting of 5.5 thick sheet glass shelf 12cm wide with CP bracket gaurd & railing 60cm long complete all as specified and directed.

S&F in repair Glass corner shelves, fancy type, 6 mm thick 250 mm x 250 mm size and fixed over CP brass bracket etc complete all as specified and directed.

S&F PVC bath cabinet with 4 mm thick loocking mirror of overall size 560 x 410 mm fixed on wall etc complete all as specified and directed.

S&F, in repair brass chromium plated, tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S&F in repair drapery rods, coloured, standrad quality, PVC coated not less than 25mm dia with heads at both ends and middle support, rings etc. complete all as specified and directed.

Demolation and breaking up drain pipes any type etc complete all as specified and directed.

S&F 110 mm Bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) bends any radius (110mm Bore) complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR) bends any radius (75mm Bore) complete all as specified and directed.

S&F in repair health faucet with 1.00 Mtr long flexible tube incl wall hook complete complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of m26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F 4 mm thick asbestos cement plain building board of size 600 x 600 mm in ceiling fixed with screw or as per manufacturer instruction complete all as specified and directed.

S&F in repair 4 mm thick asbestos cement plain building board of size 600 x 600 mm in ceiling fixed as per manufacturer instruction complete all as specified and directed.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed incl dismantling complete all as specified and directed.

S&F Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.5 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L, running welding in repair thickness of metal to be welded not exceeding 6 mm thick incl taking down existing steel butt hinges welded or bolted in steel frame complete all as specified and directed.

M & L, welding in repair, exc 2.5 cm but not exc 5 cm in lengrh thickness of metal to be welded, not exceeding 6 mm complete all as specified and directed.

S&F in repair 25mm outer dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed.

M&L for cement concrete type B-1 1:2:4 as in cills, steps; Seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 4028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

S&F in repair 18/19 mm thick prilaminated partical boad exterior grade laminated on both side with decorative choice lamination as in cupboard door shutter including dismantling complete all as specified and directed.

M&L 2nd class hard wood, wooden beading, plain fillets, square or rectangular or tringular in section clean sawn sectional area exc 3 sqcm but n exc 6 Sqcm fixed with nail complete all as specified and directed.

S&F continuous piano hinges, mild steel bright finished or electro galvanized with width of flap 30mm when open complete all as specified and directed.

S&F 100mm size extruded brass handle, fabricated type polished, ISI marked complete all as specified and directed.

S&F magnet catcher for cup board shutter complete all as specified and directed.

S&F in repair 15 mm bore brass CP mixer for mixing hot or cold water screwed down for iron pipe and fixed etc complete all as specified and directed.

S&F CP in repair central hole basin mixer with extended casted spout with 450 mm long braided hoses complete fitting as per site requirement etc complete all as specified and directed.

S&F CP in repair kitchen sink mixer with swinging spout (wall mounted model) with connecting legs & wall flanges etc complete all as specified and directed.

S&f in repair CP wall mixer with 115 mm long bebd pipes for connection to overshed shower (with bush & piston diverter fitting) with aerator etc complete all as specified and directed.

S&F in repair bowl for Coupled WC with PP normal close seat cover, hinges, fixing accessories, size - 400 x 665 x 810 mm ,P trap- 180 mm with cistern fitting for 103751S220SPP/NPP,103751P180NPP/SPP etc complete fitting as per site requirment all complete all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished. complete all as specified & directed.

M&L complete removal of existing surface on old painted surfaces of wall incl preparation and applying two coat of oil bound distemper over a coat of chalk whitening complete all as specified and as directed.

M&L 1 mm thick birla putty on wall etc complete complete all as specified and directed.

Ajay Sahu & Sons

M/s Sachkhand Traders

R P construction company

M/S MAISUR CONSTRUCTION COMPANY PRIVATE LIMITED

QUALITY CONSTRUCTIONS CO