REPAIR/REPAIR/REPLACEMENTOF JOINERY ROOF WATER SUPPLY AND PLUMBING WORKS INCLUDING CERTAIN SANITARY FITTINGS and OTHER MISC AND WORKS IN OTM AND MD ACCN AT HASTINGS AREA UNDER GE (CENTRAL) KOLKATA

Amount

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

Dismantling Timber Scantlings, 40 Sqcm and over in Section, in any Position, in Unframed Work, complete all as specified and as directed.

Dismantling Timber Fillets, Rails, Posts, Rafters, Purlings, etc., under 40 Sqcm in Section, in any Position, as in framed Work, complete all as specified and as directed.

Taking down Chowkats or Frames, (without taking off Shutter from the Frame) exc. 1.50 Sqm but not exc. 4.00 Sqm Each, complete all as specified and as directed.

Taking down Chowkat or Frame (without taking off Shutter from the Frame) n exc. 1.50 Sqm complete all as specified and as directed.

Taking down Shutters of any description, not exc. 1.00 Sqm Each complete all as specified and as directed.

Taking down Shutters of any description, exc. 1.00 Sqm but not exc 2.00 Sqm Each complete all as specified and as directed.

Taking down PVC door shutters with PVC chowkats including all fittings area exc 1.00 Sqm and n.exc. 2.00 Sqm Each complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debries/ rubbish, etc., complete all as specified and as directed.

Hacking Out Old Broken Glass (any thickness, size, quality or description) from metal frames incl punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

Taking up or down Steel Water Tubing 15mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use or removal to store complete all as specified and as directed.

Taking up or down Steel Water Tubing 20mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use or removal to store complete all as specified and as directed.

Taking up or down Steel Water Tubing 25mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use or removal to store complete all as specified and as directed.

Taking down unserviceable PVC (SWR) Pipes & Fittings of any size or pattern and in any Position (Measured overall as fixed along the Centre Line over the Fittings and Accessories), complete all as specified and as directed.

M&L Cement Concrete Type B1,1:2:4 (40 mm graded crushed stone aggregate) as in Holdfast Block including necessary form-work, etc., complete all as specified and as directed.

M&L Cutting Holes in Brick Walls, built in Cement Mortar for Taking Out or Inserting Holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1as required in exc. Half Brick but not exc. One Brick thick Walls, complete all as specified and as directed.

M&L Cutting Chases in Brick Walls or any position where directed for Concealed Water Tubing, Pinning in, Making Good to facings where required and Pointing in Cement Mortar 1:3 to making good, cutting not exc. 10 Cm girth, complete all as specified and as directed.

M&L Brick Work pulverizes fly ash bricks ,Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed.

M&L Second Class Hardwood in Scantlings wrought Timber Framed work and fixed complete all as specified and as directed.

M&L Second Class Hardwood Plain Fillets sqaure, rectangular or triangular in section wrought, secured with Nails, cross sectional area exc 6.0 Sqcm but not exc. 13.0 Sqcm complete all as specified and as directed.

M&L Second Class Hardwood Plain Fillets sqaure, rectangular or triangular in section wrought, secured with Nails, cross sectional area exc13.0 Sqcm but not exc. 25.0 Sqcm complete all as specified and as directed.

S&F Second Class Hardwood Plain, Solid, Straight Chowkats and Frames, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue, Pinned at Joints, complete all as specified and as directed.

M&L Factory made 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

S&F Flush Shutters 30 mm thick, Solid Core Construction with Block Board Core and Plywood Face Panels, Commercial type on Both Sides, complete all as specified and as directed.

M&L 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass , gauge, etc (without sash bars) , edges of framing plain, chamfered of rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkhats complete all as specified and as directed.

M&L 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass , gauge, etc (with sash bars) , edges of framing plain, chamfered of rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkhats complete all as specified and as directed.

S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5 mm thick PVC sheet fillet of width 35mm for wall Paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing including taking down old unserviceable PVC wall lining complete all as specified and as directed.

M&L Mild Steel Flat Iron 25 x 3 mm, as in Holdfast for Door, Window Frames or Chowkats etc., Wind Ties for Roof including securing bolts cut to length or drilled hole and fixed with Screw, etc., grade of Steel conforming to Fe-290 Gde E-165, complete all as specified and as directed.

Overhauling and greasing of rolling shutter of any size and pattern including scrubbing down old greasing for proper functioning, area of each shutter exc 6 Sqm but n exc 12 sqm complete all as specified and as directed.

Overhauling and greasing of rolling shutter of any size and pattern including scrubbing down old greasing for proper functioning, area of each shutter exc 12 Sqm but n exc 18 sqm complete all as specified and as directed.

S&F Axle rod of rolling shutter 32 mm to 50 mm dia MS pipe heavy grade including taking down old one complete all as specified and as directed.

S&F Rolling shutter hood cover 1.00mm thick MS sheet with a coat of red oxide primer (shop coat) of suitable size and shape including taking down old one complete all as specified and as directed.

S&F MS locking plate of standard size and shape from approved quality with a coat of red oxide primer including taking down of old one complete all as specified and as directed.

S&F Rolling shutter profile of 1.00mm thick MS sheet with a coat of red oxide primer (shope coat) minimum width of profile 75mm including taking down old one complete all as specified and as directed.

S&F Spring of rolling shutter of approved quality and size including taking down of old one complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, made of Z section 100mm long and steel peg stay, complete with glazing bars, dovetailed or welded including one shop coat of red oxide zinc crome primer, complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, made of Z section 100mm long and steel peg stay, complete without glazing bars, dovetailed or welded including one shop coat of red oxide zinc crome primer, complete all as specified and directed.

S&F Steel windows or ventilators, fixed type, with glazing bars dovetailed or welded including one shop coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L False ceiling with 'E' board "Classic" , reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium powder coated snap grid to support the boards/tiles with aluminium anodised main 'T' section 25mm x 25mm x 1.40mm cross tee 25mm x 25mm x 1.50mm thick and aluminium angle 25mm x 25mm x 1.50mm as on edges/sides including hanging arrangements with 6mm dia GI hooks and clamp and applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces including taking down old unserviceable one complete all as specified and as directed.

S&F Mild steel tubes 40 mm bore (Medium Graded) with all fittings & fixed to walls and ceiling for holding clamps of false ceiling as in repair complete all as specified and as directed.

S&F Aluminium door with powder coated anodized aluminium frame of section size 101.60 mm x 44.75 mm x 2.4 mm (jindal section 14021) thick, with shutter of style member size of 85mm x 44.45 x 2.00mm thick (Jindal section 19560), Top/bottom rail of member size 114.30mm x 44.45 x 2.15mm (Jindal section 19574) and lock rail of member size 100mm x 44.45mm x 2.0mm thick (jindal section 19564) with rubber gasket and aluminium glazing clip beading and 100mm mortice locking arrangement ,handle, tower bolt 200mm long per shutter, rollers, etc as in repair complete all as specified and directed.

S&F Powder coated anodised aluminium sliding fly proofing window, three tier (two shutter of glass and one shutter on wire mesh) without glazing bar, window shutter style shall be 40mm X 19mm, sheet thickness 1.5mm ,sliding channel 3mm thick channel width shall be as required with roller and frame (Chowkats) of window shall be 75mm X 60mm X 1.5mm thick section with or without rebate with 5.5mm thick tinted glass and galvanised wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm aluminum glazing clips fixed with rubber gasket locking arrangement as in repair complete all as specified and directed.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed etc as in repair complete all as specified and directed.

S&F Floor door stopper of steel body and overall length of cover plate 75 mm and tongue anodised with hard drawn steel spring as in repair complete all as specified and directed.

M&L Petty repair of hinges for door and window, adjustable for sliding door bolts, tower bolts, handles,mortice locks etc for similar type of work etc making smooth functioning (for proper closing ,opening) etc with entire satisfaction of Engineer-in-charge complete all as specified and directed.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples complete all as specified and as directed. NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples as in repair complete all as specified and as directed. NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included in the BOQ

S&F Aluminium alloy Handle 150mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed.

S&F Aluminium alloy Handle 150mm long, Extruded Section, Fabricated type, anodized and fixed, as in repair complete all as specified and as directed.

S&F Aluminium alloy Handle 100mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed.

S&F Aluminium anodized, Barrel Tower Bolt 200mm long, Extruded Section and fixed, complete all as specified and as directed.

S&F Aluminium anodized, Barrel Tower Bolt 150mm long, Extruded Section and fixed, complete all as specified and as directed.

S&F Aluminium anodized, Barrel Tower Bolt 150mm long, Extruded Section and fixed, as in repair complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and fixed, complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and fixed, as in repair complete all as specified and as directed.

S&F Stainless Steel Butt Hinges, size of Hinges 100mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed

S&F Mild Steel Butt Hinges, size of Hinges 100mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed

S&F Mild Steel Butt Hinges, size of Hinges 100mm, medium weight, Cold Rolled and fixed, as in repair complete all as specified and as directed.

S&F Mild Steel Butt Hinges, size of Hinges 75mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed

S&F Mild steel 200mm, ordinary rat tail pattern including roller and roller plate as in repair complete all as specified and as directed.

S&F 20mm dia stainless steel tubular curtain rod fixed with brackets, stops, rollers etc as in repair complete all as specified and as directed. Note:-Bracket shall be measured and paid separately under relevent item

S&F Fancy type, Powder coated 20/25 mm dia of drapery rod fixed in position as in repair complete all as specified and as directed

S&F Bracket for fixing Fancy type,Chromium Plated 20mm dia curtain rod/ drapery rod etc as in repair complete all as specified and as directed.

S&F Stainless steel Continuous (Piano) Hinges, width of Flaps (when open) 40mm, bright finish and fixed, as in repair complete all as specified and as directed.

S&F Aluminium body(extruded section) door closer hydraulically regulated, designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed as in repair complete all as specified and as directed.

S&F Drawer board knobs 20 mm dia of brass polished fixed with nut screw & washer etc as in repair complete all as specifeid and directed.

S&F Magnet catcher for cupboards as in repair complete all as specified and directed.

S&F Brass Cupboard lock grade I ,50mm size ,2 lever fixed in position as in repair complete all as specified and directed.

S&F Stainless steel peg set assembly for 6 hook fixing on door or wall with the help of screw as in repair complete all as specified and directed.

M&L Prelaminated Particle Board 19/20 mm thick, interior grade, double leaf pre-laminated one side with decorative choice lamination and other side balancing white lamination fixed with Screws to Timber Frame Work as in cup board shelf/shutter ,Pelmet Box or in narrow widths not exc. 15 Cm each, rebated or flat edged, properly sealed with 5 mm thick 2nd class hard wood beading fixed with water resistant adhesive except rebate side as in repair complete all as specified and as directed.

. - Ditto - all as per item No. 74.00 here-in-before but 6mm thick plywood grade BWR, type BB as in repair complete all as specified and as directed..

M&L Coloured/ Digital vitrified ceramic floor tiles10 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n. exc. 0.36 sqm (600mm x 600mm x 10mm) as in floor etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor make incl 15 mm thick screed bed or bedding of layers in CM 1:6 complete all as specified and as directed.

M&L Coloured/ Digital vitrified ceramic floor tiles10 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n. exc. 0.36 sqm (600mm x 600mm x 10mm) on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed.

M&L joint free coloured ceramic floor tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortar complete all as specified and as directed.

M&L Glazed Ceramic Coloured 450 x 350 x 7.0mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed.

M&L Granite (of any type) Work (Table rubbed and polished) 18 to 20 mm thick, in Steps, Cooking Platforms and like, Set in Screed bed of 20mm thick in Cement Mortar 1:4 including Pointing in White Cement 1:2 using Marble Dust with admixture of Pigment to match with Shade of Granite including Cutting and Polishing including half round edges,including dismantling of stone slabs and tiles of any description or thickness including taking down old unserviceable one complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and fair without using Extra Cement complete all as specified and as directed.

M&L Rendering 5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces of Ceiling, etc. finishing Plastered Surfaces Even and Smooth, without using Extra Cement. complete all as specified and as directed.

M&L for Preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (any colour/tint) over a coat of primer complete all as specified and directed.

M&L preparing new Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.

S&F Sheet Glass 3.0mm thick ordinary quality glazing with Wooden Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed.

S&F 5.5mm thick tinted glass, ordinary quality and glazing with aluminium/wooden beading in square exceeding 0.5 sqm in each pane fixed complete all as specified and as directed.

M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

M&L Preparing new Wood and Wood Based Surfaces of any description, n exc 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.

Supply and Laying Steel Water Tubing 15mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Supply and Laying Steel Water Tubing 20mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Supply and Laying Steel Water Tubing 25mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Relaying/Re-fixing Galvanised Steel Tubing 15mm Bore (dia) and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from dismantling here-in-before) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush including Provision of New GI Fittings (as ordered), complete all as specified and as directed.

Relaying/Re-fixing Galvanised Steel Tubing 20mm Bore (dia) and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from dismantling item here-in-before) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush including Provision of New GI Fittings (as ordered), complete all as specified and as directed.

Relaying/Re-fixing Galvanised Steel Tubing 25mm Bore (dia) and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from dismantling item here-in-before) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush including Provision of New GI Fittings (as ordered), complete all as specified and as directed.

S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 1000 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe including Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed.

S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 2000 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe including Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed.

S&F Stainless Steel Sink with Drainage Board l.0mm thick Overall size 915mm x 460mm and Bowl size 410 mm x 330 mm x 160 mm for Kitchen or Laboratory with Plugs, Washers, Brass chromium plated Waste Fitting 32mm dia, PVC waste pipe, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed. Make : Prayag Cat Part No. 939D or equivalent in Nirali / Hindustan/ Neelkant .

S&F PVC (SWR) Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, ceilings and floors with pvc clamps complete all as specified and as directed.

S&F PVC (SWR) Bend 110mm bore (dia), any type, equal or unequal with Access Door, etc. and Jointing with Solvent Cement, as in repair complete all as specified and as directed.

S&F PVC (SWR) Branch Pieces 110mm bore (dia), Single (Single Y) equal or unequal with Access Door, etc. and Jointing with Solvent Cement, as in repair complete all as specified and as directed.

S&F PVC (SWR) Junction110mm bore (dia), Single (Single T) equal or unequal and Jointing with Solvent Cement as in repair complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, and 15mm dia PVC connector pipe, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. Make - Parryware Model No-C0406(SP)/C0434(CTH) or equivalent make as specified in the particular specfication.

S&F 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections including taking down/out unserviceable one complete all as specified and as directed. Make : Cera cat part No CONGO B1010109/ Parryware Model No- E-8090 or equivalent model as specified in Particular Specification here in after.

M&L as in petty repair for complete PVC Syphon assembly (internal kit)+ PVC washer+PVC clamps ,bracket for hanging with wall) for any type/size/make of low level flushing cistern,tightening of fittings etc & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed.

S&F PVC Coated stainless steel kitchen rack of size 750 x 730 x 250mm fixed on wall with screw, washers as in repair complete all as specified and directed.

S&F PTMT Ball Valve 20mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed as in repair, complete all as specified and as directed. Make : Prayag, Cat No 151 or equivalent model as specified in list of approved makes given here in after in Particuler Specification.

S&F PTMT Ball Valve 25mm dia having mini -mum weight 455 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed, as in repair complete all as specified and as directed. Make : Prayag, Cat No 153 or equivalent model as specified in list of approved makes given here in after in Particuler Specification.

S&F PTMT Ball Valve 20mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed complete all as specified and as directed. Make : Prayag, Cat No 151 or equivalent model as specified in list of approved makes given here in after in Particuler Specification.

S&F PTMT Ball Valve 25mm dia having mini -mum weight 455 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed, complete all as specified and as directed. Make : Prayag, Cat No 153 or equivalent model as specified in list of approved makes given here in after in Particuler Specification.

S&F chromium plated Health faucet with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) as in repair complete all and specified and directed Make:- Essco (CAT No. ALE-ESS-583) or equivalent make specified in the particular specification

M&L for leaking water in brass/CP bib tap, pillar tap, concealed stop cock, angle valve of any make/ description/size in any position by replacing the (brass spindle+brass jumper washer + CP Wall Flange) ,tightening of fittings etc ,also removing air lock, blockage of water pipe line & make the all system fully functional to the entire satisfaction of Engr-in-Charge as in repair complete all as specified and directed.

S&F Vitreous china urinal flat back of size 465X355X265mm white with grating & union for discharge pipe including Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) but excluding flushing cistern, flush pipe & waste pipe but fixing only automatic flushing cistern with bracket flush pipe etc as in repair complete all as specified and directed. Make:- Hindware Cat No 600001 or equivalent in Jaguar, Prayag, Cera, Parryware

S&F Glass shelf assembly consisting of 5.5 mm thick sheet glass self 19-12 cm wide, 60 cm long with chromium plated brackets guard and railing fixed in position with necessary fixing arrangement as in repair complete all as specified and directed. Make:- Prayag or equivalent make as specified in Particular Specification here in after.

S&F Swivel shower with shower arm 15mm size,195mm long with bend of 45 degree with flange of PTMT any colour as in repair complete all as specified and directed. Make : Prayag (Cat No. 127-H) or equivalent model as specified in Particular Specification.

S&F Chromium Plated waste coupling heavy full thread 32mm (brass) fixed to stainless steel sink including necessary fixing arrangement as in repair complete all as specified and directed. Make:- Essco Cat No- ALE 544 NFT or equivalent model as specified in list of approved makes given here in after in Particuler Specification.

S&F PTMT Grating Doom of 100mm size (Min weight 25 grms) and fixed-in-repairs, complete all as specified and as directed.

S&F Angular Stop cock concealed type ,15 mm dia cast copper alloy chromium plated fancy type with wall flange screwed for iron pipe etc. as in repair complete all as specified and directed. Make- Jaquar , Cat No- CON 059KN or equivalent make as specified in Particular Specification here in after.

S&F 150 mm dia brass chromium plated rain shower with shower arm length 450 mm long fixing with 15 mm bore pipe etc as in repair complete all as specified and directed. Make:- Essco or equivalent make specified in the particular specification

S&F Chromium Plated Telepohne shower with connector pipe & wall hook as in repair complete all as specified and directed. Make:- Essco or equivalent make specified in the particular specification

S&F 125 mm dia brass chromium plated shower rose with or without swivels joint for fixing to 15 mm bore pipe etc complete including taking down old one complete all as specified and directed. Make:- Essco Cat pat No EOS-541N or equivalent make as specified in the particular specfication.

S&F Central hole for Hot and Cold water supply basin mixer, brass chromium plated screwed down for iron pipes,including necessary fittings etc as in repair , complete all as specified and as directed. Make : Jaguar Cat Pt No. CON 167KNB or equivalent make as specified in the particular specfication.

S&F 3-in-1 wall mixer for Hot & Cold water supply with telephonic shower arrarengement, brass chromium plated fancy type, screwed down for 15mm bore iron pipe incl necessary fittings & fixtures etc.as in repair complete all as specified and directed. Make:- Jaguar Cat CON 281KN) or equivalent make as specified in the particular specfication.

S&F Chromium Plated Kitchen sink mixture with regular swinging spout (wall mounted model)chromium plated screwed down for iron pipes,including necessary fittings etc as in repair complete all as specified and directed. Make : Jaguar Cat Pt No. FLR-CHR-5309N) or equivalent make as specified in the particular specfication.

S&F Chroumium Plated hand shower with CP flexible connector pipe & wall hook as in repair complete all as specified and directed. Make:- Prayag, Cat CON 281KN) or equivalent make as specified in the particular specfication.

S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with "p" or "s" trap front or back inlet including fixing Bolts with and excluding 10 litre capacity low level Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat botton cover (coloured) fixed with mild steel chromium plated or aluminium hinging device and making good disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out unserviceable WC Pan and connected Items, complete all as specified and as directed. Make - Parryware Model No-C0297,C8090 or equivalent make specified in the particular specification

S&F Chromium plated Bib taps for 15 mm bore of pipe incl necessary fittings & fixtures as in repair complete all as specified & directed Make : Essco (DLX-511 or equivalent make specified in the particular specification

S&F Two way bib cock 15 mm bore with flange cast copper alloy chromium plated fancy type screwed for iron pipe brass ferrule etc. incl necessary fittings & fixtures as in repair complete all as specified & directed Make : Essco Cat Pt No. DLX-512AN).or equivalent make specified in the particular specification

S&F Chromium Plated soap dish incl necessary fittings & fixtures as in repair complete all as specified & directed. (Make:- Jaguar CAN-1151N) or equivalent make specified in the particular specification.

S&F PVC soap dish standard size fixed with walls incl necessary fittings & fixtures as in repair complete all as specified & directed. Make : Prayag or equivalent make specified in the particular specification

S&F Toilet paper holder of brass chromium plated fixed to walls with chromium plated CP brass screw as in repair complete all as specified and directed. Make : Prayag or equivalent make specified in the particular specification

S&F Brass chromium plated Pillar Tap screwed for 15 mm bore pipe incl necessary fittings & fixtures as in repair complete all as specified & directed. Make : Essco (DLX-507) or equivalent make specified in the particular specification

S&F Brass chromium plated fancy type stop cock screwed for 15 mm bore of pipe etc.incl necessary fittings & fixtures as in repair complete all as specified & directed. Make:- Essco Cat pat No DLX 513B or equivalent make as specified in the particular specfication.

S&F CPVC pipes 40 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings fixed on Walls Ceiling or laid in Floors or any other Situation with clamp as in repair complete as all specified and as directed.

S&F PVC bathroom cabinet (white) of size 430 x 330 x 100 mm (approx) with one single shutter and built in mirror in front of shutter, fixed on walls with wooden plugs and and chromium plated brass screw and cup washe as in repair complete all as specified & directed. Make -Prayag or equivalent make as specified in Particular Specification here in after.

S&F Cascade type (coloured) floor mounted water closet with low level flushing cistern coloured with floor trap, PVC coloured seat cover and connecting pipe etc and making all necessary connections etc as in repair complete all as specified and as directed. Make : Parryware Aquarius, Code No. C-0235, C-0715 C-2016, C-8080 & C-8071 or equivalent make as specified in Particular Specification here in after.

M&L as in petty repair for PVC assembly internal kit fittings with complete set for single Piece-WC (cascade type, cocealed Flushing Fittings & size) with combined flush tank complete all as specified and directed.

S&F Chromium Plated tublar towel rail 600 mm long and 20 mm dia with bracket at both ends and fixed with chromium plated brass screw and wooden/plastic cleats as in repair complete all as specified and directed. Make : Essco/Prayag or equivalent make as specified in Particular specifications.

S&F 600 mm long CP towel rack with lower hanger including complete fittings and fixtures etc as in repair complete all as specified and directed. Make : Essco/Prayag or equivalent make as specified in Particular specifications.

S&F Bib tap with nozzle 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight15mm-95 gms) as in repair complete all as specified and directed. Make : Prayag (Cat No. 121) or equivalent make as specified in Particular specifications.

S&F Pillar taps fancy type15mm bore of PTMT any colour screwed for iron pipe & fixed. (min weight 15mm- 110 gms) as in repair complete all as specified and directed Make : Prayag (Cat No. 142) or equivalent make as specified in Particular specifications.

S&F Stop valve 15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-90gms) with PTMT flange as in repair complete all as specified and directed. Make : Prayag (Cat No. 142H) or equivalent make as specified in Particular specifications.

S&F wall mounted Shelf 450 mm long of PTMT with chromium plated brass screws and wooden or plastic cleats minimum weight 300 grams as in repair complete all as specified and directed. Make : Prayag (Cat No. 191) or equivalent make as specified in Particular specifications.

S&F PVC connection pipe 15mm size with PTMT nuts of length 600mm long as in repair complete all as specified and directed. Make : Prayag (Cat No. 323) or equivalent make as specified in Particular specifications.

S&F Chromium Plated Connector pipe for hot water supply of size 450 mm long fixed to 15 mm dia GI pipe with brass nut and spanner including necessary fixing arrangement as in repair complete all as specified and directed. Make -Prayag or equivalent make as specified in Particular Specification here in after.

S&F 32 mm dia PVC waste pipe for WHB/Kitchen sink including all necessary fixing arrangement as in repair complete all as specified and as directed. Make:- Prayag Model -327 or equivalent make as specified in the particular specfication.

S&F Coloured (any) PVC seat cover, suitable for EWC (of any description) fixed with mild steel chromium plated hinges as in repair, complete all as specified and as directed. Make : Parryware, Cat No C 8071 or equivalent of Make Hindware

S&F Towel ring of size 150mm dia decorative type fixed with walls including necessary fittings etc as in repair complete all as specified and as directed. Make: Jaguar CAN-1121 BN or equivalent make as specified in the particular specfication.

S&F Glass corner shelf of single set with chromium plated brackets and CP railing including necessary fittings and fixture as in repair complete all as specified and as directed. Make:Prayag or equivalent make as specified in the particular specfication.

S&F Chromium plated bottle trap ( with internl partitions) 32mm size with 250mm long wall connection including wall flange fixed in position with necessary fixing arrangement as in repair complete all as specified and directed. Make : Jaquar Cat No. 769 or equivalent make as specified in Particular Specification here in after.

M&L Dewateringof existing PVC tank/service reservoir of bldg of capacity 2000 ltrs at roof by using existing valve and high capacity dewatering pumping set, cleaning the tank with wire brass/fine steel wire brush clothes, removing all dirt scale algae formation inside the tank by using TERBAC G5 (laboratary tested chemical) including writing with white paint over black base/cement base on tank wall as 'Tank Cleaned On...........' with date,month and year with minimum of 10cm of height capita letters/numbers.The next cleaning stages as under: (a) Cleaning the tank throughly with fresh water by using high speed jet pump. (b) Screaning of bacteria to be done by using halogen compound of TERBAC G5, TERBAC-G65. (c) Cleaning the floor/wall of water tank by using vaccum cleaner. (d) Next screening of bacteria suspended bacteria by sterlizing method using ultra violet rays inside the tank and finally screening of bacteria by strerillization.

Allas per item No 153.00 here in before but PVC water tank capacity upto 1000 ltrs.

Allas per item No.153.00 here in before but PVC water tank capacity upto 500 ltrs.

Rounaq Enterprise

JHAWAR SUPPLIERS

B G Trading Co.

MASTER BUILDERS

DIPAK ENTERPRISE

RUNJEN CONSTRUCTION

AUTO ELECTRICALS